A Dramatic Shift
April 28, 2019
Inspirational Art
Pier Voulkos boxes
Of all the fabulous polymer clay techniques, which would you say is the most dramatic? There are certainly a lot of them that can be bright and colorful, shiny and sparkling, dramatic and graphic, but could you pick out just one that you think has the most impact when first seen?
I have to say, the one technique that really pops for me is mica shift. It can be colorful, shimmery, and quite dramatic, and has the added effect of looking three-dimensional when it is not. And who doesn’t love a visual illusion?
Mica shift has waned in popularity of late. I’m not sure why because it is just such a gorgeous technique. But when I started researching the idea of making mica shift the theme this week, I found myself on really old posts and pages, looking at work that was created 10, 20 or 30 years ago. That made me all the more determined to bring this technique’s wonderful effects back into the limelight here.
For those unfamiliar with the technique or how it works, here is a little history and explanation for you.
The effect itself is a result of manipulating the mica in metallic clays into orderly layers that you can then manipulate in a controlled manner. This can be done because mica, a shiny, silvery, layered mineral, forms tiny flakes when ground up. The flat side of these flakes are reflective, but the sides are not (like a mirror.) So, if mica is flat side up, it reflects light, but a stack of mica seen from the side is just dark.
You control the mica in your clay by conditioning it in a pasta machine, folding the sheeted clay in half and running it through over and over. The pasta machine rollers, squeezing the clay down, also nudges the flakes to lay flat. Eventually, all the flat faces of all those tiny flakes are facing up in the sheet, causing it to be reflective and shiny.
So then imagine what happens to all those perfectly flat flakes if you press something into them? The flakes get tilted, showing their dark sides (gosh, sounds like some people I’ve known!) That’s where the control comes in. You decide where to distort that perfectly flat sea of face up flakes with a texture sheet, a blade, or hand tools, and where there is distortion, there will be dark outlines of tilted mica. Those outlines are there under the surface too, as the flakes, like tiny dominoes, knock each other over under the invading lines of a texture sheet or a hand tool.
You can also just play with the difference between the shiny surface and the dark sides by stacking mica sheets and cutting it up, rolling sheets into a cane, or twisting or folding a narrow stack, just to name a few approaches. In these cases, the sides of the original layers stay dark and the surface stays shiny, so you have dramatic contrast.
Mica shift in polymer has been called by other names over the years. One of the original innovators of this technique, Pier Voulkos, (those are her boxes opening this post) called it her “invisible caning”. Later, Karen Lewis referred to Pier’s technique as chatoyant, a French term meaning to shine like a cat’s eye, which is used in gemology to describe the bright reflected bands of light caused by aligned inclusions in a stone. That’s certainly fitting for polymer mica shift too.
Let’s take a look at some truly dramatic and lovely examples of this technique.
Shifty Ideas
Around the same time period that Pier was experimenting with her invisible canes, Mike Buesseler was playing with mica clay sheets and “ingots”, stacking then cutting, twisting, texturing and curling up sections of these sheets and ingots to create beads and surface design.
Here is a beautiful necklace using a very simple technique of twisting a square strand of stacked mica sheets.
I would explain more about Mike but, instead, I’m going to let him explain for himself in what is, to this day, the best video class that I have ever viewed. No joke. I’d rather you stop reading this post and watch that video, if it’s all you have time for today. The video is well over an hour-long and it is twenty years old but, no matter how long you’ve been working with polymer or how much you think you know about mica shift, it is well worth your while. It also has an interesting little story about how it came to be a free master class for all. Check it out on YouTube here.
Grant Diffendaffer has long been my polymer clay hero. His mica shift and designs are breathtaking. Although he worked with techniques derived from all the early developed mica shift techniques, his most impressive are his impression pieces. This type of mica shift, sometimes called “ghost shift”, is created by impressing a texture into a sheet of well-conditioned mica clay and then the raised layer of clay is shaved off with a very sharp tissue blade making a smooth surface but leaving the illusion of dimension. Grant created his own texture sheets and then applied them to mica clay Skinner blends. His choice of blended colors surrounded by textured black makes for some very dramatic pieces.
Some of the most dramatic and graphic mica shift you’ll see to this day comes from the studio of Dan Cormier. A lot of his effects come from cutting and puncturing straight down through the clay. When using a blade, the clay shifts only in the cuts where the blade separates the clay causing just a hairline distortion and thus, very thin dark lines. Puncturing shifts more clay as the tool pushes clay aside to get through. The advantage of these distortions, however, is that the design is present and consistent all the way through the stack.
Here’s another take on mica shift from my own table. These gauge earrings might seem a bit more shimmery than a lot of mica shift as I add plain mica powder (bought from handmade cosmetic suppliers) and translucent clay to my metallic polymer clay to bring up the shimmer a notch. These are created from Skinner blend sheets that were stacked, twisted, and rolled smooth before curling them up. They also receive a lot of denim buffing. My mica shift effect is actually the same basic technique that Mike used for the necklace you see above but I twisted it tighter and rolled it smooth with an acrylic plate.
Just so you know, 3 of the artist’s mentioned here no longer work in polymer clay which is why you aren’t getting the abundance of information and links I can usually offer. Pier, Mike and Grant are all multi-disciplinary creatives who moved on to another creative form—Pier returned to dancing, Mike to music and Grant has stayed in crafts but has been exploring a variety of materials and forms. Regardless, we can sure be grateful for their time with us!
Curious Shift
If this little discussion of mica shift has you anxious to get to the studio table and try it out, I heartily encourage you to do so. In fact, I would like to challenge you all to create a little (or a lot) of mica shift this week. I’m going to do the same, creating some new designs with ideas I came up with after researching this post. I’ll share what I’ve done next week and post them to my personal Instagram page.
Do you think you can you get in one mica shift project before the end of the week? Try it and then please send me a photo or link you would be willing to share online, and I’ll see what I can share at the end of next week’s post. You could also just post to Instagram and tag with #polymerartschallenge or message me on Facebook at The Polymer Studio page or write back if you’re getting this by email.
If you have some great mica shift pieces to add to the discussion, leave a comment at the end of the post for us to check out.
And with that, I have to run. Its been a crazy week. There were some problems with production and getting Issue #2 of The Polymer Studio wrapped up (the release for the new issue will be in a couple of days, April 30th, so keep an eye out for it in your inbox, if you have a digital edition coming, and your mailbox in the weeks to come. Or subscribe or order the issue on our website!) and then we’ve been having problems with the city getting our plans through so we can move forward with the renovations here at the house (many people are still rebuilding from the huge fires we had in November, so they are busy beavers at the planning offices) but, finally, the demolition begins tomorrow and there is still a last few things to prepare. Good news though … we put the refrigerator on the porch instead of in my studio! Yay! We moved the liquor cabinet in here instead. MUCH better idea. I think. Or will it be weird that I can pour a glass of port without leaving my chair here? Well, we shall see.
Until next Sunday my dear readers … have a wonderful week!
Splitting the Difference
April 21, 2019
Inspirational Art
Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)
So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.
I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!
So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?
Splitting the Canvas
Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.
For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.
Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)
Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.
This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.
And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.
Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.
You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.
Splitting up is Not Hard to Do
If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!
Here is a simple series of steps you can try right now … A Cane Split Canvas:
- Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
- Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
- Burnish the canes into the clay sheet so the surface is smooth.
- Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
- Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
- Once you find the section you like, cover it with plastic wrap and cut with your cutter.
- Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.
Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.
You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.
Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!
Now for the Great Tile Adventure
Story time! For those entertained by the little dramas of my little life.
So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!
Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.
So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!
Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!
I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!
So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.
A Big, Bold Challenge
April 14, 2019
Inspirational Art
Kathleen Nowak Tucci, Secret Garden Necklace
Have you considered challenging yourself creatively with something you’ve never done before, or at least not for a long time? I have a lot of creative friends who are doing just that right now and, as I work towards having free time again after an exceedingly busy couple of years, I am too considering what to start in on. My mind, probably like yours, never stops churning up ideas so the designs in my head and in my sketchbook have progressed into a variety of new possibilities. The question is, what do I challenge myself with first when I can get back to creating my own artwork on a regular basis?
Whether or not you are at a similar crossroads or want to change up what you’ve been creating, I encourage you to consider the question of how you could challenge yourself as we go through some work that is very much unlike what I have done in the past. I am hoping that, going through some of my own possibilities, this might start those wheels turning for you. What, if any, pieces here feel like they are in the same vein as your present work and which of these approaches have you’ve never imagined yourself doing but might consider?
Not Sage
I, like the vast majority of polymer artists, work primarily from organic inspiration. (See my post from last month about man-made inspiration for contrast.) A lot of my work is also rooted in story, particularly speculative stories dealing with the human struggle in both usual and unusual circumstances. It’s emotional, and personal and not at all neat and tidy. So, this means that certain styles of work almost never cross my mind as options. But that doesn’t mean I shouldn’t try it.
Highly graphic work is one of the things that I’ve never done. I have no aversion to it and, in fact, really enjoy beautifully crafted and highly graphic artwork. I have even drawn particular elements as inspiration for aspects of my work, both in polymer and in graphic design, from the likes of Mondrian, Mucha, and even graphic novels. But I have never designed any highly graphic art work.
If I did aim for a more graphical approach, it might be something like Jana Lehmann’s colorful and fun pieces, with clean lines but still plenty of blended color and subtle color variation to make the colors glow and give it the calm energy I gravitate towards. I could see trying to create cleaner lines and using purer color and standard shapes although I think the organic would find its way in at some point.
Aren’t those flowerpot pins just adorable? That brings up another thing I don’t do much of. I don’t do cute. Which is strange because I love cute! Although I am kind of picky and maybe a bit odd about the cute that I enjoy. So, if I were to try to create something cute, it would probably be cute with a dark edge to it. Maybe something like these Bitty Bitey Ones by Darcy of North Carolina. Just look at these faces! The big black bead eyes help but it takes some serious sculptural instincts to get such great expressions. The cuteness factor is through the roof! Could I work on my skills long enough to create something even half as cute? Would I want to? Won’t know unless I try, right?
There is one thing though – I just couldn’t create such pieces in pink. Now, I have made some pink polymer jewelry in years past, mostly because of requests, and it did sell well but it didn’t do anything for me. Been there, done that, got the t-shirt. But the important thing was that I tried and found out I just didn’t want to. That period did get me a touch more comfortable with the color so when it turns up incidentally in a blend or interference powder, I don’t just set it aside. The thing is, it’s not just pink that I steer away from. I don’t, in general, work in bright colors. But I’ve really been thinking that more saturated colors are something I should push myself into trying out.
Maybe I could do something like Jana’s super saturated color schemes above or, go completely over the rails and aim to mix-and-match a little bit of everything in one piece like Susan Dyer so expertly does. Talk about graphic! Her use of solid colors and highly contrasting patterns could be sniped from Bauhaus prints. Her compositions often teeter on the edge of chaos but the confining silver bezels and the consistency of her unmuddled approach to color and pattern creates cohesiveness.
One of the reasons Susan’s work appeals to me is because it’s not actually that big – the pendant above is all of 1.75” by 1.5”. I also tend to design jewelry that works as an accent or embellishment for the wearer rather than it outshining a person. But I know a lot of polymer artists prefer large pieces as one can really show off the surface design and techniques that way. And, honestly, I would love to do some really large jewelry but since I generally wouldn’t wear anything really large, it’s hard for me to envision what a wearer of this kind of work would want, and I think that makes me hesitate to the point that I have not tried.
I have been trying to work up the courage to go big by taking a close look at the work of big and bold artists like Kathleen Nowak Tucci. I love her work because it’s not only unabashedly large but it’s also, in part or almost wholly, created from recycled materials, such as the Saul Bellow award winning piece of hers you see at the opening of this post. And talk about going big … her work has also appeared on several big TV shows including the multiple times her work adorned the immensely talented Lily Tomlin on the show Grace and Frankie. You can see both Kathleen’s Leaf Necklace and Pistil Bracelet on Lily here.
What’s on Your List?
There are a number of other things I could try to push my work outside my comfort zone but these are presently on the top of my list. So, now that you’ve seen the top of my list, what do you think you would you be willing to try out that you would not normally do?
Keep in mind, this self-challenge is not designed to change your style but to just put yourself, and hard, to see what you come up with. There is the potential for as yet unimaginable discoveries about yourself and where you want to take your work. It can be a way to inject some fresh new energy into your studio time and, since there is no end goal such as even showing the work to anyone or selling it, these explorations can give you the freedom to just push yourself in unselfconscious directions.
Are you one of the ones that have been doing this already this year? If so, maybe you’d like to share what you’ve tried to do and how you like the experience. You can insert a comment at the end of the post to let me know. Maybe when things slow down over here in the chaos it is my home at the moment, we can devise a midyear challenge for us all to work on. What do you think?
A Bit of Business … Last Chance to Subscribe and Get Issue #2 Directly from the Printer
If you haven’t subscribed or renewed your subscription to The Polymer Studio, you will want to do so by end of day Monday as we send off the mailing list to the printer to Tuesday morning. Be one of the first to get the new issue in your hot little hands by subscribing or pre-ordering your single issue now.
Your subscriptions and purchases support what I do here so if you like the blog, help me keep it going while also continuing your artistic education with our highly informative, entertaining, and rather pretty publications.
Back to the Chaos
Ok, gang, I have to get back to wrapping up the next magazine issue while navigating my discombobulated house. The chaos is in a holding pattern while we wait for the city to get the plans back to us. There is a ton of construction still going on due to the fires in November so things are a tad busy over there. But at least we figured out how to NOT have the refrigerator in the studio although it is just outside my door, just looming over me. So my present challenge is not to open that thing every time I have to squeeze by it!
As for you, my darling readers, I hope you are enjoying your weekend and have a fabulous week to look forward to.
The Lure of Creative Spaces
How do you feel in the space in which you create? This has been on my mind quite a bit lately – not just the function of a space but how it feels and even how it represents us. I’ve decided to let that thought guide us into a slightly different type of blog this week.
As you might have read in the previous post or two, there are some changes going on at the homestead here where Tenth Muse Arts is based and we’re about to start tearing out walls and then, of course, rebuilding in that space. So, of course, my husband and I have been asking ourselves, “What do we want in this space?”. Well, we want a lot of things but there is a budget, and it is not particularly large, so we have been talking through what is most important to us. It has turned into a very interesting conversation, one that goes beyond paint colors and cabinet styles.
After addressing the functionality of the space we have to repair and rebuild – because of it doesn’t function nothing else is going to work out well – my husband and I followed the logical path and started talking about color, materials and placement. By the end of the conversation though, we were talking about emotion. It may be because we are both artists that we backed out to ask how we wanted it to feel followed by the details that would make the space fulfill that wish. This is the space we live in (and where I work as well) and we want the home to feel comfortable, like shrugging on a comfortable but well-tailored coat that hangs great and hugs you in all the right places.
With this on our minds, Brett walked into my studio the other day and simply said “This just feels good.” And I knew why he said that. This is what we are after. Not in the style or color scheme but the inviting, comfortable feeling of the space. I have to agree, my work space does feel good but it has not always been so. It’s taken me a long time to realize the importance of creating a space that is as comfortable as my favorite coat, arranging things not just to be functional but to feed my spirit as well.
Up until we moved here a couple of years ago, I had always worked on the business and created my art in a basement or a garage – some kind of windowless, very utilitarian space (the opening photo is a shot of my windowless basement studio in Colorado) – primarily because it was the only unclaimed living space available. Although I would try to decorate, it was never a priority so it mostly didn’t happen. However, those kinds of spaces could be very hard to work in as I usually worked every waking hour there and it would get depressing, not being able to see the outside world. It would make me restless and that wasn’t good for productivity. But what choice did I have?
As it turned out, I have a lot more choices than I allowed myself. My husband made me see that. He is an animation artist and director as well as being the son of antique dealers. Both his vocation and upbringing are in things that consider space, a lot. Telling a story in animation is very dependent on how the characters and the viewer’s eye moves through the space of the frame and antiques are about decorating and so he is always arranging and rearranging the house and coming home with things to bring in more personality.
Watching him made me think about my mostly utilitarian space and how little I did with it. So, with his help, I started bringing in plants to sit in the cold corners and printed fabrics to drape over the bookcases. We even pulled in an old oriental rug to go under my non-polymer desk area. It changed everything. This was when I was working in a garage (so yeah, the plants were fake or under a grow light but then, I had the look of sunlight in the corners!) When I got the wonderful space I now work in, I really took it up a notch and so now, yep, it just feels good!
Many of you are probably in situations where the space you create in may not ideal however, you can still make it your own and you can still make it feel good, inspiring, and a place that makes you happy. What that means is up to you and what is most important. You might want it very organized with matching furniture and color coordinated accents to make you feel good or you might like the freedom to make a mess on your thrift store tables and mismatched storage bins. You might prefer to stick with utilitarian but keep a collection of favorite things on a nearby shelf to inspire you.
The question really is, have you considered what you can do with, or to, your space to make it feel good (or better) to you? Because a comfortable space is far more conducive to being productive and creative than one that is cold, cramped, awkward, or just boring.
To that end, this week, I’d like to peek in on some studios.
The Grand Tour
To start us off I’m going to I pulled this out of an hour-long bonus video I gave to continuing subscribers from The Polymer Arts and adventurous new subscribers to The Polymer Studio magazine late last year. This is a jazzy visual tour of my studio and office space, complete with boppy background music, a peek into the backyard retreat just outside my door, and an introduction to my furry in-house staff.
You’ll see I’ve stuffed a lot into this one room and it’s two walk-in closet areas, but I’ve been sure to include touches of things that make me happy everywhere. From my collection of oddities on the mantle to the jars of random materials on my jewelry cabinet to the display of all my SLR cameras from over the decades, the space is very much me and is a joy to go into every day.
I personally have always been fascinated with the spaces people create in. They feel so personal, like a little window into the mind and soul of that person. So when I first started The Polymer Arts back in 2011, I knew I wanted to do an issue all about the spaces that we work in. I figured it would be of interest to others as well, not just for voyeuristic reasons, but because it could make us feel more connected. And I sure was right! The Spring 2012 – Creative Spaces issue sold out in print quicker than any other and is still one of the most downloaded of our digital back issues.
You can really see the personality of the artists that participated in that issue. For instance, it was no surprise to see that Christi Friesen’s space was full of knickknacks and collected bits of art and all kinds of books. She is a high energy person and with an insatiable curiosity so it makes sense that she should surround herself with things that she loves and that inspire her. You can see a bit of this in the first page from her section of that issue.
By the way, Christi is actually between studios right now, or you can say the whole world is her studio as she travels all over this year, searching for the answer to how one keeps creating while traveling. You can follow her shenanigans replete with mini classes and demos in her new members only Virtual Creative Experience here.
When the photos from Leanne and Paul Stoddard at Swirly Designs came in for that Spring 2012 issue, I was not surprised to see the orderliness and organization of their studio. The ornaments they create are designed with tremendous care with a focus on whimsy – and so is their space. Their studio looks like something put together for an interior design TV show with its coordinated color scheme complete with matching white furniture and energetic sparks of red tucked in here and there. Oh … and lots of Christmas trees, just everywhere!
Now, when I asked Bettina Welker to share her space, I was not sure what to expect. As it turned out, she was also working in a basement like I was at the time. The importance of functionality is obvious and there is not much room left for decor but she has a great wall of sketches, photos and and design ideas that she keeps up for inspiration. It actually inspired me at the time to create something similar for myself. It makes so much sense!
All these studio peeks are fun stuff, right? The popularity of that issue always stuck with me, so when I was determining the concept of the new magazine, I decided that the spaces that we work in should be a regular feature and that’s how the name, The Polymer Studio, came about. The next issue of The Polymer Studio, coming out in a few weeks, features Christine Dumont’s studio and the interesting journey she took to create the space she now works in. (We’ll be sending in the mailing list for the first round of the new issue to be mailed directly from the printer on Friday, so get your subscription or pre-order your copy now to be one of the first to get it in your hot little hands!)
So, what is your approach to how you set up or decorate your creative work space? Even if you can only snag the end of the dining room table after dinner, that corner should be conducive to productive creativity. Maybe you can keep some of your favorite pieces out where you can see them to be motivated by your successes. If you can, hang pictures or put out objects with colors, textures, and forms that excite you. Make your space as physically comfortable as you can and reconsider the placement of your tools and materials if getting to them is difficult or even just a minor hassle. Doing a little spring cleaning and reorganizing and reevaluating your space might be just the thing to add that extra spark of energy and excitement to your creative time and your work right now.
More Voyeuristic Opportunities
Here’s a few more links to other studio tours for you to peer in on. Even if you studio is just how you want it, peeking in is just fun.
In 2016, Katie Oskin of Kater’s Acres invited people into her studio with a personal tour video, seen below. You’ll notice that she also has a couch in her studio. I know mine feels like such a necessity now. Can you fit one into your space? Or do you have one already? (If you have one, leave a comment! I’d love to see how many of you also thought a cozy sitting (and nap!) space was needed.
Ginger Davis Allman takes you into her studio on this post of hers but it’s focused on her tools and materials more so than the physical space. But doesn’t that tell you a lot about what’s important to Ginger?
And here’s a post full of photos of Debbie Crother’s studio. You’ll read that she’s really big on recycled and environmentally friendly furniture and organizers. She also has a lovely, dedicated display of her work. But what strikes me is that she has sooo much space! Having a builder for a husband sure has it’s benefits!
Okay gang… I have to run off now. I need to finish putting together the next issue of The Polymer Studio (and finish clearing the kitchen for demolition!) If you have not subscribed to the magazine yet and have had any inclination to do so, I would so love for you to join me there. You subscription and book purchases support the creation of this blog and all the artists that we are working to support in turn, plus you get inspiration and tons of eye candy for yourself!
In the meantime, have fun considering what more you could do with your space to encourage your creativity and enjoyment of your time creating. If you’ve posted about your space anywhere we can go check out online, leave it in a comment here. We’d all love to come e-visit!
The Contrast Conundrum
March 31, 2019
Inspirational Art, Polymer community news
What would you say is the area of your craft that you most need to work on? Is it a skill that you want to acquire or improve? Is it simply getting yourself to do more work more often? (I know that’s one of mine!) Or is it some particular approach to the work that regularly seems to baffle you?
For me, I have always struggled with contrast. It’s not that I don’t like contrast, I just tend to like it done subtly. But if I am too subtle, the work lacks energy. On the other hand, if I consciously push it too far, it doesn’t feel like a genuine expression of mine. So, the idea of contrast is often on my mind when I am working.
First, let me correct a misconception that some people have. You do not have to have a high contrast in your work to create a good design. There can be little to no contrast in a piece and it can still have a beautiful design. Contrast is about the degree to which elements such as color, texture, pattern, shape, size, etc. are dissimilar or alike. Like anything else in design, good use of contrast comes down to making an intentional decision about how you will use it in your work.
For instance, high contrast tends to be high-energy and bold while moderate contrast comes across often as refined or restrained, and little to no contrast tends to be quiet and reserved. These descriptors are not always true because the level of contrast plays differently depending on what design element is being contrasted and how it works with (or against) other characteristics in the work.
Okay, enough jabbering on about these abstract concepts. Let’s look at some examples and get those little gears in your head turning as you ponder how you use contrast now, or how you would like to be using it.
Compare and Contrast
One of the most common ways to develop high contrast, especially in polymer, is with color. From canes to mokume to silkscreened veneers, high color contrast is the only way to have the effect of some techniques even show. But at the same time, minimal color contrast with little value change can result in lovely but subtle marbling, it helps support the dreamy feel of blended alcohol ink techniques, or allows us to showcase texture or form while color is relegated to a supporting role.
One of the most foolproof ways to use color for contrast is to go black and white. But if you go that extreme, you will probably need to heavily play up other design elements such as form, pattern, line, or texture. Or, you can put other colors into play.
That’s basically what Lynn Yuhr did with this earring and pendant set. The primary high contrast is a black border surrounding a white background. That’s simple enough, but then she throws a variety of colors in there, both warm and cool ones from across most of the color wheel. Then she goes for contrasting shapes by including both the softness of circles and the sharp angularity of triangles. Not only that, (this is really a piece all about high contrast!) she includes both solid shapes and thin lines. Some shapes are floating and unattached while others are overlapping, and some lines are solid while others are dashed. Often, this much variation can become chaotic and ungrounded but everything here has clean, defined and very graphic edges and she only chooses 2-3 variations of each design element. But the most grounding aspects are the black frame holding it all in and the swath of white being the common “floor” that this is all scattered on. It is energetic and yet contained, fun but still sophisticated. You can see, in the opening image, that she uses a similar approach but goes for full washes of color as the background, for slightly less dramatic contrast.
Have you ever been told to not wear plaid with polka dots at the same time? Well, you can if you play it right, pushing the contrast by adding even more pattern to your outfit so that is an obvious intentional choice. You’ll often find this approach in the work of Louise Fisher Cozzi. This necklace below has many different patterns. Some are very regular, while others are more organic. Most are rather busy but then there are those strings of solid pieces with nearly no pattern but for a slightly uneven glaze of color. Regardless of all these contrasting patterns, they have a connecting commonality in their circle form as well as being in a limited range of color saturation (pureness of color), giving what would otherwise be a cacophony of visual texture, a necessary cohesiveness. The result is a sophisticated kind of fun, sure to draw a bold, gregarious, and fun-loving buyer to this work.
Tactile texture can also be used as a contrasting mechanism in your design. An easy way to achieve contrast with texture is to have a smooth surface and a rough surface. It could be as simple as part of the work being highly polished and part of it sporting a matte finish. You can create textural contrast without going for the smooth versus rough by having two types of rough surfaces. That still contrasts if a bit more subtle.
The gorgeous Jenny Reeves earrings below, a metal, rather than polymer example (although there are plenty of folks who do similar texturing in polymer) has plenty of contrast although it does not jump out at you. The matte silver on the sides of each circle contrasts with the rough reticulated metal but not jarringly so. The matte finished silver moves to rough silver moves to rough gold so that there is only one level of change between each of those three treated sections of the circles. This somewhat gradual change diminishes the impact of the contrast resulting in a softer feel. Imagine how this would have looked if it went from matte silver to rough gold without the transitional section? It would have a very different feel.
As I mentioned, going for low contrast has its place and advantages. Dorota Kaszczyszyn doesn’t generally go for high contrast, but that is probably because she focuses primarily on her imagery and creating the forms and textures to bring her fantastical adornment to life, as is evident in her Water Dragon necklace here.
It’s not that contrast doesn’t exist in this piece – there is certainly contrast in texture, especially on the wings, going from a dimpled cap to a feathery brush below. However, all the surfaces have some kind of hand tooled texture, minimizing the contrast in that regard. The colors also have a minimal contrast, going from silver to a similarly shimmery brush of color using an interference green/purple powder, a color scheme echoed even in the focal shell on the dragon’s back. This low contrast gives the necklace, and her creature, a quiet grandeur, but it is not bereft of energy, instilled with a light but rippling liveliness through the texture and the flow of the shapes.
A Contrasting Evaluation
If, after seeing the ways you can work with contrast, you feel inclined to play with the way you use this design element, you can do so with some simple exercises.
Color is pretty easy to start with. Starting with a color combination you commonly use or tend towards, replace each color with the same hue but choose colors that are much darker, brighter, lighter, or subdued than the other colors. You will want the colors to have at least one characteristic in common (like they could all be very saturated or all be very light or they could all have a bit of black added to them) to keep the combination cohesive. You could also simply take out a bunch of blocks of clay and create several color pallets by shuffling them around – one high contrast, one meeting contrast in one low contrast. See which one you like the best.
If you want to better understand your options in color, grab Maggie Maggio and Lindly Haunani’s Color Inspiration book, or for a more condensed overview, grab your copy or get the Summer 2017 issue of The Polymer Arts which is all about Color! (We still have that 33% off 3 or more magazines sale going on and you don’t need a promo code for it now.)
You also can do a self-evaluation by grabbing a few of your favorite pieces, as well as a few pieces that weren’t successful, and looking at the difference in contrasts in the following areas:
- Color
- Texture
- Shape/form
- Size of forms or motifs
- Pattern
See if you can identify where contrast worked well in the successful pieces and maybe where it could have been improved in the less successful ones by simply imagining increasing or decreasing contrast in each of the design elements listed above.
If you’re one of those who likes to make lists, copy these five design items out onto a piece of paper (or into an Excel sheet if you like those) and for each piece you have, identify whether the contrast is low, medium, or high for each design element. Then if you look at your evaluation list, you may find that you always have low contrasting color or high contrast in pattern, or vice versa or that, in general, you don’t work in high contrast or you never try low contrast. Whatever you’re not seeing a lot of, try to consciously create designs that push you out of your comfort zone.
Now, as I mentioned at the beginning, I don’t like to push high contrast in my work so it may seem funny for me to ask you to do something that goes against your norm, but I was only able to determine my preference because I did exercises like this. Push yourself like this can really help you discover a lot about yourself as an artist.
But if you’re more of the low-key, intuitive type, just keep contrast in mind next time you’re at the studio table. Like any design consideration, your work can be improved simply by being aware of whether you are making conscious decisions about design. If you are now more aware of contrast, you may find you’re able to more easily identify why a piece may not be working by checking the contrast and asking yourself whether low or high contrast or something in the middle would best serve what you’re trying to express or the type piece you are trying to create.
From Behind the Scenes
On that note, I am going to go work on the contrast that exists in my life between having a normal living situation and figuring out how to work and live in the beginnings of a halfway gutted house. But I always like a challenge!
I almost have my makeshift outdoor kitchen ready! Grill cleaned and ready for action. Check. Camp stove hooked up to grill size propane tank. Check. Camp table/sink with an actual running faucet via my garden hose set up. Check. Yep … no crazy construction is going to keep me from my creative cooking!
Now I just need to make covers/cozies for my instant pot and my non-polymer countertop oven so they can sit outside more or less protected from the elements. Then … I need to clear space in the studio for the refrigerator. I have always said that one’s studio or office should be as far away from the refrigerator as possible to discourage unintentional grazing so I’m seriously breaking my own rules here! Didn’t I just say I like a challenge? Maybe I should have clarified how much of a challenge I like. *sigh*
I’ll be juggling all this while I am in the midst of polishing up the next issue of The Polymer Studio but have thus far been able to stay more or less on schedule. Just don’t miss out on this next issue!
Issue number two of The Polymer Studio has a wonderful collection of projects for you as well as a tour of Christine Dumont’s studio (so exciting!), an interview with the uniquely creative Cynthia Tinapple, stencil explorations with Debbie Crothers and much more! We would love for you to join us in The Polymer Studio… Just subscribe to get your plethora of polymer fun and inspiration. Your subscription also supports this blog and all the polymer obsessed artists that have helped to create the beautiful content of our publications.
Thank you for your continued support! Enjoy the rest of your Sunday and have a creative and inspiring week!
Mixing and Mingling, New Cover, & 33% off Back issues
March 24, 2019
Inspirational Art, Polymer community news, Tips and Tricks
We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.
We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.
All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.
(Be sure to scroll down to the last section for the 33% off sale stuff.)
A Fine Mix-up
So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.
One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.
Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!
So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.
Mixed Directions
Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.
This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.
Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.
With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.
The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.
Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.
Putting Together Your Own Mixer
This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.
You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.
In fact, let’s have a sale!
Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.
And … I’m Off!
I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up. But talk about mixing it up!
So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!
MidWeek Update – 15% Off Sale, Mokume link, and Sampler Magazine
January 31, 2019
Polymer community news, The Polymer Arts magazine news
I know I was talking about having the blog once a week, and that is the plan, but for corrections and any really exciting news, I may be dropping in mid-week, like now. Ignore me if you’re busy – I get it!
15% OFF SALE … Only through Friday, Feb. 1
Exciting money-saving stuff first … we are running a spur of the moment 15% off sale on books and back issues including the fabulous Polymer Art Projects – Organic book, and back issues of The Polymer Arts. Subscriptions and single issues of The Polymer Studio are not included in this sale, nor are the All Back Issues packages … but those are 40-50% off instead!
Grab books and magazines in print or digital format at www.tenthmusearts.com through February 1st.
Use Promo Code TMA15
Sampler Flipbook of The Polymer Studio
Now, if you haven’t subscribed or purchased a copy of the new issue of The Polymer Studio, here is a little bit of a tease for you. This link right here leads you to a sampler of most of the first pages of this new issue for you to check out. Find the crossed arrow icon and click to go full screen when you get there for the best view.
Go peek at it and then once your curiosity is piqued, get your full copy on our website to get fully immersed!
New and Missing Mokume links
Now on to an apology … the mokume billet image on Sunday’s post was apparently too small and was fuzzy on many an email and device and the link to the original page was missing. I’m so sorry about that. It’s added in the post now but for those who wanted a closer look, you can find the metal mokume process chart here. Mind you, that chart is in German and is but one method for making such a ring. However, here you can find a mokume video showing another approach, one that could be directly recreated with polymer … hint, hint.
Thank you for your Feedback!
And last but not at all least … I just wanted to thank all of you who left comments about the new blog format. It was a resounding “yes” to the more in-depth once a week approach which so gladdened my heart. And now it is our It’s a great reward for me to see so many of you are enjoying it. So I am excitedly outlining content ideas for future posts but if you want to push for anything in particular, leave a comment below this post (email readers, click here) and I will happily look into it!
- « Previous
- 1
- 2
Have you ever used paint on polymer? If so, why did you chose to paint it rather than use the inherent color? This question is at the heart of a kind of prejudice against paint that used to be rather prevalent in the polymer community. I think painting on polymer has found its place in our repertoire of techniques but statistically (and I’m just looking at the stats I have available from the blog and the general response to articles) I don’t think it gets quite the regard that other techniques do and it makes me wonder if people still steer away from it, even when it might be the best choice.
Ages ago, I unintentionally incited a heated conversation about painting on polymer through a blog post where all the color and the focal point of the piece was painted. There were many comments about how painting on polymer was not “working in polymer” and therefore I should not be writing about it on a polymer blog. This sentiment was rooted in the thought that since polymer is already colored, painting would be superfluous if not downright heretical. This was also a time when polymer was fighting for its place in the art world and competitions for polymer were being won by pieces that were not wholly polymer which heavily irritated those who strove to create only with polymer clay. With a strong love for the material, those crafters were simply strong proponents of letting the material shine through.
Well, a material can be gorgeous on its own, but what the artist wants out of that material may be other qualities beyond its inherent visual ones. For instance, I prefer woodwork that has been treated with nothing but oil and wax to let the natural beauty shine through but wood that is stained or painted can result in beautiful work as well. It’s not wrong to change or obscure the wood’s natural look. It’s just different. Polymer has other qualities beyond it’s color, primarily its sculptural characteristics including the ability to hold very fine detail. So, if its sculptural qualities are primarily what the artist needs from the material, then why not use whatever kind of treatment gives the surface the color and feel the artist finds most appealing or fitting for the work?
The fact is, the color in polymer clay only pieces tends to be fairly uniform since we are working with a material which is colored throughout making it fairly difficult to achieve an organic variation and imperfect diffusion of color. On the other hand, paint which is applied in layers can so readily be everything from dense and uniform to translucent and feathery to gritty and splattered. The facts are that it is easy to get smooth, uniform color using polymer clay but can be tricky with paint and it is easy to get variation in a field of color with paint but takes more work than it is often worth to get a similar effect in clay. In other words, each material has its strengths and so why not employ them based on those strengths?
As an artist, one should use the material that suits the end result desired if the material and the skills to use them are available to them. We’re not talking just paint here either—this applies to any material. Sometimes real metal, with its strength and shine, will work better than faux polymer metal or real stones will glimmer and give a piece the needed weight that faux polymer stones cannot. I am not saying that the real thing should always be used though. Faux materials in polymer do have distinct advantages such as faux metal being lighter and more flexible than the real thing and faux stones are usually cheaper to produce and can be formed in ways that real stones cannot.
Ideally, you start designing a piece with the idea of what you want to make, then figure out what materials would be best suited to the look, construction, durability, and cost of the work as well as your skillset and interests. With this approach, you can make the best work possible rather than limiting yourself because you feel some sense of loyalty to a single medium or the tribe of artists that identify themselves by that medium. That loyalty, like not painting color onto polymer, can be unnecessarily limiting and you could be missing out on wonderful new ways to express yourself and create.
The fact is you and your work do not need to be defined by your primary medium. You are an artist or a crafter or an artisan. You can choose to tack a medium on to one of these basic labels in order to be identified by a related community or as a way to explain very succinctly what you do, but if one day you get up and decide you want to try working with something else, are you going to feel locked into that label? Because if you do, you may be less inclined to explore and that would be sad. As I see it, every true artist is an explorer and one that should not be limited by any one material if their path of exploration leads them elsewhere. That’s just my humble opinion!
So, if you think paint would look good on your polymer, I think you should go for it. Let’s look at a handful of artists who combine paint and polymer in ways that polymer alone would not readily be able to create.
Color on Color
If you are a fan of Doreen Kassel’s work, you’re probably in love with either her whimsy or her exuberant color. But did you know, she only works with white clay? Or at least this is what she told me a few years back. Polymer is a sculptural medium for her. Its potential color possibilities do not come into play. Instead, she paints her polymer work primarily with oil paints. The wash and translucency of the oil paint layers gives a unique depth and glow to the colors that you just wouldn’t get with polymer alone. Her use of white as the base, like oil on canvas, does much to brighten the colors as well.
Miniature polymer creation is another area where paint seems to be indispensable. Now, I am no expert in this area but after working with and publishing articles and projects with Stephanie Kilgast, I have learned just how important paint can be for creating lifelike miniature objects. The clay does provide a large amount of the color in Stephanie’s work but painting is what punches up the realism and her amazing sculptures. Highlighting and antiquing play a major role in the realistic look of pieces like this fungi and coral inspired piece.
By the way, if you’re wondering why Stephanie sculpted this on a tin can, it is because she is very active in promoting environmental awareness and uses discarded objects to celebrate “the beauty of nature in a dialogue with humanity, questioning the lost balance between human activities and nature”. If you like what she’s doing you should consider supporting her on Patreon, a platform for supporting artists you admire with a monthly donation of just a couple dollars. You are then given access to privileged information and insight on the artist and his or her work as well as, sometimes, demonstrations and tutorials. Check Stephanie’s page on Patreon here then check out the service in general. There are some really cool artists sharing some really exclusive stuff on this platform.
Lorraine Vogel applies paint to the surface of textured polymer clay using stencils. Polymer clay allows her to create textures that gives the paint variation and dimension, an approach that softens the sharp edge and graphic effect that stencil painting often has.
By the way, you can learn the technique in the above pendant from Lorraine’s tutorial in The Polymer Arts’ Winter 2016 issue, available in digital or print on our website of course. Or you can go to her Etsy shop and purchase one of her comprehensive digital tutorials.
And I would be remiss if I didn’t point out that in the last issue of The Polymer Studio, Debbie Crothers shows the possibilities of acrylic paint and polymer in a very comprehensive, exploratory article with numerous short tutorials to get you exploring as well. Acrylic pours on polymer is the technique on the beads that grace the cover. The resulting mix of color and its visual texture is just flat out yummy.
Although I am talking paint here, the idea that other materials can and should be used on polymer where they can add or express your ideas best extends to all colorants including alcohol inks, pastels, mica powders, iron oxides, or glazes. Most of these other colorants have been better accepted in polymer work, probably because they change the clay color but don’t obscure it the way paint can. But even in traditional paintings, the type of substrate the artist uses to paint on greatly effects the feel and look of the work. Polymer can be a wonderful substrate, especially since its sculptural properties allow for such a great interaction with the paint and such creative potential for the form of the piece.
So, if you’ve been curious about the various effects you can get with paint on polymer or have wondered if you can combine some other material interest such as fiber, metal, paper or whatever, try it! Mess around and explore. Search online to see what others might be doing with these combinations and let their ideas motivate you to try stretch your skills and creative interests.
So, what new material will you be trying out this week or in the very near future?
The Sage Chronicles
My so-called break has yet to feel like a break, I have to admit. There have been some family matters and siblings who need my support and getting the house back together (and getting rid of all this dust!) is slow going as I try to take it easy with the one gimpy arm. So, I still have a full schedule between that, the family stuff, my physical therapy, and my efforts to come up with a plan for returning to production without getting in this state again. You know, some day, I just want to know what it’s like to be bored. Yeah … that’s not likely to happen any time soon.
For those following the saga of the broken drain turned into a major renovation, here’s a photo of the kitchen after I laid in the first line of slate on the backsplash last week so we could at least make the kitchen fully functional and I could get to cooking properly again! I can’t wait until I actually get to start putting in the design on the backsplash. I’ve never done a mosaic project this big but I am excited and so glad I am giving myself the break just now so I can enjoy the process and not rush it. Or not take 6 months or more to complete it!
So, I’m off to rest up now. I hope you have had a great, creative, and inspiring weekend. Here’s to a creative and inspiring week as well!
Read More
What is it about faux damaged and worn surfaces that we like so much? I mean, it’s everywhere – crackle, antiquing, weathering, patina, torn edges, scratching, distressing – these are all widely used surface techniques in art and in all kinds of decor. But have you ever asked yourself why we are drawn to things that are breaking down and degrading?
Let me say right out the gate, I absolutely adore this kind of surface treatment so don’t stop reading because you think I’m going to try to dissuade anyone from using it. But I do think it’s interesting that artists of all kinds are interested in it and wondered if you ever considered why people, in general, are so attracted to it.
I’ll give you the answer in one simple word – story. Things that are worn, show signs of use, and show the passage of time, have a story, history, a connection leading into the past lives and worlds of other people and places, or are a connection to our own past. Human beings love story. Civilizations of all kinds, and through all time, have told stories or sung songs to keep a culture, event, or person alive in the community or society. Communities everywhere collect evidence of the past – both their own and of others – and engage in the exchange of stories through nearly everything that we do and attend to including banter and gossip, entertainment, all our print and spoken communication sources , and all kinds of visual forms including, and maybe most especially, art. So, it’s no wonder artists love to recreate that innate sense of story by creating the look of aging, wear, breakage and weathering.
Now, you may think you simply like the look and any attraction you have to aged looks has nothing to do with the potential history something might have had or the stories that you could make up, consciously or unconsciously. The thing is, whether it is faux or real aging, we will always associate the look of something worn and weathered with the past and the past means history and history is, well, hi-story. It’s never just what we see that draws us. It’s what we associate with it, what our experiences tell us and our emotions evoke.
If these looks were just about the visuals, more people would be drawing inspiration from gory and grimy imagery alongside the pretty, intriguing, and more benign sources. (There are definitely people who draw texture from gore and grime but they’re not usually doing it to create something with a comfortable, aesthetic beauty.) So yes, the worn and weathered textures are beautiful, but it is psychologically attractive because it represents the passage of time and it’s interaction with the world and us.
Understanding that it is story and not just the beauty of these aged and distressed textures can take your work and designs into a more complex and rich realm because, instead of just thinking “This is a pretty texture, I want to make something with it,” you can start asking yourself, “What is the story behind this texture and why do I want to put it on this piece?” Or conversely, “Why do I want to make that texture into a piece of art?”
This is not to say that you have to write up an actual story or history for the piece that you’re making. I think just being aware that what you’re putting forth does represent a history will help guide you in your choices. After all, the viewer of your work isn’t necessarily going to know what story you associate with it but they will insert their own story, or an emotion associated with a story that the textures elicit, and the whole of the design should support the idea of its history or use.
Let’s look at some work with some of our favorite worn and weathered textures, and not just polymer either – I think we need to branch out a bit, especially in this subject matter, to see just how ubiquitous this type of texture is in art.
All a Story is Cracked Up to Be
Let’s start with an example from an artist who is obviously all about the story in her artwork. Christine Damm’s website and shop name is, after all, “Stories They Tell”. All her work looks weathered or worn, maybe a bit beaten and dinged, but she’s coaxed a persevering beauty out of these rough, color strewn treatments with consistent intention. This piece of Christine’s includes parts of an old vintage hand beater whose actual history of use, neglect, and, now, adoration, is echoed in the polymer clay and combined in a tribal-esque design.
This piece was actually the opening beauty shot for Christine’s article, “Found Fusion: Designing with Polymer & Found Objects”, in the Spring 2016 issue of The Polymer Arts. It’s a fantastic article that will really get you thinking about how enriching found objects can be when added to your work. We still have copies of that issue in print on our website here and you can read more about Christine’s and her process on her website here.
Nadezhda Plotnikova’s “Sunny necklace”, below, is aptly named. Although the surface of the focal beads is quite crackled and the other beads have a rough, weathered look, the necklace is anything but worn out looking. The bright and light colors convey that “sunny” emotion while the surface treatments give it a relaxed and comfortable feel. It’s that same kind of feeling you get from your favorite well-worn comfy jeans (and don’t those jeans have stories!), only with a bit more pizzazz. It seems like the individual beads here would have the stories, though, and the necklace would be a recent gathering of them. Like maybe it could be a collection of old sun-bleached coral washed up on a distant island combined with wave-worn, fantastical rocks, all found and brought together by some seafaring adventurer. Or something like that. What story do you come up with when looking at this?
Like Nadezhda’s above, Tamara of Block Party Press has chosen a light theme for a necklace of visually distressed beads. Her’s however, comes in the form of stylized daisies but the color and treatment is on the dark and heavy side, with its worn-out whites over a dark brown base. It’s a kind of a subdued approach to what we have above, being much less dramatic. I also feel like it’s the kind of thing you might have found in the back of your mother’s jewelry drawer, forgotten and dusty, and just exuding nostalgia. It absolutely begs for a story to be wound around it. It’s the kind of piece that I think would feel instantly a part of your personal history even when new.
Some artwork does not just imply story but is actually created from a story. Our featured artist in the #3 issue of The Polymer Studio is an avid researcher and history lover from Brazil quite inspired by interpreting story. Beatriz Cominatto created the pieces you see in the opening of this post and the one below as part of a series inspired by the native work of the Marajoara people. She researched the history of Brazil’s Marajo Island and the archaeological finds there extensively before starting the series and then developed this into quite the elaborate art installation, complete with simulated archaeological work. These pieces imply story even when you even to those uninformed about Beatriz’s inspiration, due to the consistently applied signs of age and the tribal design.
You can see and read more about this Beatriz’s work, in the next issue as she is our featured interview. She has had the most amazing artistic journey! She’s had a lot of hurdles to jump being so isolated, primarily language-wise, in Brazil, from the rest of the polymer community and yet she grew polymer as an art form there almost single-handedly, even helping to develop Brazil’s own line of polymer clay. You gotta read this article! You can also find out more about her Marajoara series on her feature page in Polymer Journeys 2019.
When I think about cracked and torn pieces in art jewelry, I always think about the metalsmiths. There’s something about taking a jeweler’s saw and developing cracked layers, revealing the jewels or textured surfaces beneath. Both the metalsmiths and admiring collectors seem to be quite drawn to it as the treatment is not at all uncommon. Lexi Erickson’s penchant for this kind of treatment is often paired with pitted and worn metal as in this pendant below.
It almost feels like Lexi’s piece was torn from some old piece of machinery which could lead you to wonder where and what that machine was and maybe what the machine’s purpose was and whether its maker ever imagined it would become a piece of jewelry. No, I’m not saying that’s what she did but that’s the kind of story, or at least e a sense of story, this type of work can invoke, all because of the thoroughness in her treatment of that one layer.
And what about this amazing conglomeration of worn, cracked, scratched and yet intensely beautiful surface treatments on this ceramic vessel below? Lesley McInally’s work is often reminiscent of an old doorframe much in need of painting or the corner of a crumbling old house where the plaster and frame have started to show. And that red dot … so simple and yet it adds so much energy and drama. I don’t think it’s supposed to be blood, but it could represent something of that sort. It really depends on where your mind wants to go with the possible stories buried here.
Creating Your Own Story
So, I want to give you a little, fun challenge today. Go take a look at some of your more elaborate pieces or, if you don’t have anything of your making at hand, look up some of your favorite pieces by other artists. What is the story, for you, in each piece that you look at? Tell yourself as much or as little of the story as comes to you in the first minute or less. Do this with at least 3 pieces, maybe 5. You may discover, during this process, a story in a piece that was only unconsciously there, but once you ask yourself about its possible history, it may become quite obvious. How exciting is that? Or do all of your pieces already come with a fully realized story?
Some artists do work that way, creating full-fledged stories for all their work, although I think it’s more predominant with people who create figures, animals, or creatures of some sort. I learned to do this with my art jewelry, mostly because, when I was selling, I made sure each piece had a title because that really helps to get potential customers thinking about its story and since they write the story, they tend to find a connection to the work, making it much more likely that they would buy the piece. I have a whole article about naming your pieces and the advantages of this in the Fall 2014 issue of The Polymer Arts if you want to read more about that.
My Own Story
First of all, I want to thank all of you who wrote me little personal notes about my physical well-being. You’re also sweet! Mind you, it’s nothing serious but chronic tendinitis does make it very hard to work, I have to say. But I have my workarounds. And for those who wrote me about the earthquakes… I grew up with them and although they are scary in the moment, us native Californians just take it in stride. There were no major injuries from these quakes as it was centered in a fairly unpopulated area and deep in the earth. We were rolling around quite a bit here but nothing even fell over, which was a miracle considering the state of our house.
As for this house renovation, we are supposedly really close to being done but it still looks like a wreck and everything is covered in a layer of white dust from all the plastering. It feels like it’s going to be months after they finish before the house is back to normal, just because of all the house cleaning we get to look forward to and all the organizing. It’s going to be like moving into a new place! Well, it is mostly a new place now, actually. Which is cool! But a lot of work.
The good news is that we do have nearly one whole bathroom done, which is really nice, to say the least. We’re doing the painting on it to save us some bucks while the crew works on the kitchen and tiling the other bathroom. I’m training the family on painting and other home improvement stuff. It’s become quite the family project which is pretty nice. We get to spend paint-spattered time with the teen before she goes off to college in a couple of months!
As for work here at Tenth Muse headquarters, I’m still working on polishing the next issue of The Polymer Studio which is going slower than I’d like because of the tendinitis but I’m going to keep at it. I hope to have the actual publication date next week so stay tuned!
I hope you are enjoying your weekend and have a little time to go and find some of the stories in your work–you’ll love doing that! I promise. Have a great week!
Read More
Just flew in from Australia yesterday so I’m a bit jetlagged still but I wrote up some thoughts on the plane and pulled some pretties to demonstrate some more ideas on passion in your art, so here goes.
If you are reading this, chances are, you are passionate about art, either creating it or supporting its creation. Can we take just a few spare seconds to admire and be amazed by that passion of yours? I’d suggest that you stop at this moment and really let the emotion of that passion of yours come to the forefront, letting it blossom in the memory of what drives you to create or be supportive of creativity. Can you feel it? Close your eyes if you don’t feel it yet and just give it a few seconds to come to the surface so I can pose a few questions while that emotion is coursing through you.
Got it now? Okay. So, tell me … what color is your passion? Close your eyes if you need to and see what color blooms in your mind.
Then ask, does your passion have a temperature? Is it cool and constant or warm and rolling? Or something else entirely?
What does it act like? Is it like a soft, persistent wind, or a crashing ocean or something in between?
It doesn’t matter what metaphors you come up with for the feeling, you just want something concrete to hold onto. With those sensations and images in mind now, ask yourself, is that feeling there when you sit down to create? Does that passion spill out onto your worktable and direct your work? Does it drive you to come up with ideas or search out and soak up great art and other inspiring sights and sounds?
With all these metaphors and answers in your mind, I want to ask the core question that just couldn’t be put forth until you were in the right mindset:
Do you like what you create and why you create?
That might sound like a strange question because who would continue to create art while not liking it? Well, many of us do. That’s been at the heart of several conversations I’ve had recently, all related to trying to make a living from creative endeavors. That need to pay one’s bills is not the kind of drive that we really want to direct our work if fulfilling our passion is at all a goal of ours.
The fact is, letting out your passion and letting it guide you feel risky because you are putting a bit of yourself out there into the world in that process. Or a lot of yourself sometimes. It’s scary, isn’t it, putting your latest work out, wondering what people will think, whether it will sell or whether the receiver will like it? But it’s thrilling too, especially when people respond to it, when they connect to your work and to you. It’s a serious high.
You deserve to get that high on art. Don’t you think?
High on Creativity
I bet you can spy those artists who do get that high on a regular basis, people who let their passion run wild and lead their work. Here are just a few of my personal favorites but start thinking of your own as I go through them.
One of the first people that comes to mind is Ellen Jewett. She has worked in polymer, epoxy, and paper clay, using no tools but her hands and a brush, and makes only what she wants to make. Here is but one of her mind-blowing sculptures.
Her work is born of a unique and driving passion. In her own words:
At first glance my work explores the more modern prosaic concept of nature: a source of serene nostalgia but this is balanced with the more visceral experience of ‘wildness’ as remarkably alien and indifferent. Upon closer inspection of each ‘creature’ the viewer may discover a frieze on which themes as familiar as domestication and as abrasive as domination fall into sharp relief. These qualities are not only present in the final work but are fleshed out in the process of building. Each sculpture is constructed using an additive technique, layered from inside to out by an accumulation of innumerable tiny components. Many of these components are microcosmic representations of plants, animals and objects. Some are beautiful, some are grotesque and some are fantastical. The singularity of each sculpture is the sum total of its small narrative structures.
I encourage you to take the time to read her full artist statement. You may be surprised by her approach and amazed by her insights into her own work and purpose.
I have found that many of insanely passionate artists are also similarly intense thinkers. Some of these passionate thinkers take their love of art a step further by sharing their passion through education as a way to spark and inspire the creativity of others. Christine Dumont is just such an artist, giving polymer and mixed media artists a place to push themselves and grow through her website Viola and its related projects.
Her own work comes about as a result of intense exploration. She does not create to sell, and I think this gives her a freedom that an artist dependent on their work for their income may find harder, although not at all impossible, to achieve.
Christine will actually be in Switzerland teaching this mix of polymer and metal September 14-15, 2019. If you are interested in joining the class, you can message her directly through her website.
As demonstrated by Christine’s passion for teaching, a creative passion doesn’t have to manifest itself purely in your art. Teaching, which takes a particular passion of its own, is just one alternate avenue to steer one’s creative passions. Giving back to others is another way. We had a whole section of community recognition for polymer artists who give back in our first edition Polymer Journey in 2016. We have so many giving and generous people in this community! One of those beautiful people is Wendy Moore who I had the unparalleled pleasure of staying with this past week in Canberra, Australia.
Her creative passion was intertwined with a passion to give back to others when she founded the Friends of Samunnat alongside Nepalese lawyer Kopila Basnet, to help support and give independence to women who were victims of violence. Wendy’s passion and empathy for others is seen directly in her art as well, including this piece I photographed at her home but which you can also find in the Polymer Journeys 2019 edition. It is a representation of her “confusion and angst relating to issues about how we move forward in relationships with Australia’s indigenous people.”
Wendy’s passion has not gone unnoticed outside the polymer community either. It was recently announced that she has been awarded the 2019 Order of Australia medal by the Australian Governor-General for her contribution to the international community of Nepal! This is one of a set of awards and appointments the Australian government uses as a principal way of recognizing outstanding citizens. Join me in a big congratulations to (a probably very embarrassed and blushing) Wendy Moore. Read more about the award along with her interview in this article here.
And you can also look forward to reading in depth about Wendy, her journey, her work, and her life in issue #4 of The Polymer Studio later this year, so keep up those subscriptions!
Here are a few pics from my time with Wendy. I’ll get more photos of the trip up on Facebook where you are welcome to follow me.
Wendy and I contemplating the insanity of this immense tapestry which recreated a much smaller painting in every nuance. At the Australian Parliament house’s Great Hall.
Forest labyrinth built by some passionate creative person in the bush just beyond Wendy’s house. Wendy and I are walking it with my step-daughter and Wendy’s granddaughter.
Photos by Brett Varon
There are so, so many other artists I could point out as examples of deeply passionate people who let that passion drive the work they do, both in and outside the studio. But this is all I have in me to write just now. Right now, I am very passionate about sleep!
However, I would encourage you to continue this search for passion in your daily perusals of artwork online. I would challenge you to keep an eye out for work in which the artist’s passion is intensely obvious and try to imagine the emotion and drive that they must have to create the wonderful work they share with us.
If you aren’t feeling a glimmer of what you think these dynamos must have, perhaps it’s time to assess what you are doing and why. Perhaps you need to infuse your work with new inspiration and materials (as suggested in last week’s post) or maybe you would be more fulfilled spending some of your time teaching (which might include writing articles for publications like The Polymer Studio. Check out our guidelines.) or maybe you need to step back and ensure you are creating in a fulfilling and meaningful way for you, not just for your customers. If your work is infused with your passion, you’ll sell it and you’ll get noticed. Just note how highly passionate art grabs your attention!
Okay, off for more sleep so I can hit the ground running on Monday as I aim to get Issue #3 off to the printer in early July. It’s shaping up to be a really gorgeous issue but I’m still having my challenges here as the house is still in various stages of construction (the worst of it being there are no working sinks except the one in the garage) but the bones of the kitchen are in so that is awesome! Now I can start working on the back-splash I designed. Well, maybe after this next issue if off to the printer.
In the meantime, have a wonderful, inspired, and passionate week!
Read MoreI’m sorry to say that I have not been able to find sufficient Wi-Fi or cellular service to work on research and photos for this blog. I tried getting these done before I left but it got a bit chaotic and you know what they say about best-laid plans! But here is another little story about passion that will hopefully hold you over until I return next weekend.
Photo by David Clode on Unsplash
I am on Kangaroo Island in South Australia right now. 2 days ago we were in Cairns off the Great Barrier Reef where we got to see a real passion bloom in our teenager. My step-daughter just graduated high school and this trip was her graduation present. Australia and the Great Barrier Reef, in particular, were chosen because she is entering college as a Marine Biology major. She had to declare a major when she applied but the truth is, she is not at all certain what she wants to do. She is interested in conservation and environmental issues so the reef and its survival through the ravages of global warming is something that resonates with her.
In Cairns, were lucky enough to find a snorkeling trip run by a very passionate marine biologist who took us out on the reefs and educated us for a good hour on the creatures of the reef, the ecology, and the efforts being made to save it. Our teenager soaked it all in, every word. You could see her interest blossoming into an intense passion before our eyes. She couldn’t stop talking about it. It was so lovely to see that. I nearly cried.
This is not to say that she might not change her mind later but I do think we witnessed the start of an intense journey out there in the aqua blue ocean. Do you remember when your passion for art or for polymer occurred? Do you remember the feeling? Is it still there?
If that same passion doesn’t still exist, it is okay to consider a change. I have had so many passionate excursions in my life although writing and creativity have always been out front. Sometimes we just need to get out and adventure to figure it out or find it again. Sometimes those adventures just reaffirm or invigorate a passion that already exists but perhaps those passions needed a new and novel experience to energize them again. Or perhaps it is not the subject that is in question but what you are doing with it.
The blog I had planned for this week was originally about that—figuring out if we are doing what we want with our passion and our love of art. It is a question that needs to be asked regularly. Sure, routine and inertia can keep you going even if you’re not completely happy with what you are doing, but shouldn’t we strive to do what we love if at all possible?
This week, I’d like to suggest that you try something new every day. Not just in your art but in your daily life. Drive a new way to work. Shop at a different grocery store. Take a day hike at a nearby park or area you’ve never been to. Wear your hair differently. Try a new food or restaurant. And in the studio, try a new technique, just once at least. Or try a new material even. Or a new form—so if you primarily do jewelry, try sculpture or wall art. Set yourself this challenge just to shake it up and see what you discover. You never know if a new passion will bloom inside of you from just one little different adventure.
Read More
Have you ever looked at a piece that you are creating and think, it could use a little more contrast? And when you think of contrast, what do you turn to? Colors? Light or dark values? Maybe texture? How about, next time you’re looking for more contrast, you consider orientation?
In most work, there is a perceivable orientation of the pieces, marks, and edges. If everything is going in the same direction –vertically, horizontally, or some version of diagonally – there is a constant and strong flow in that direction which can be a wonderful way to convey certain emotions or levels of energy, but mixing it up can increase the energy of your work when it needs that extra boost.
I was thinking about that this week because we finally determined a suitable tile design for our new shower. The go-to design for shower accent tile is running it horizontally towards the top of the wall, although vertical lines have become a thing of late. I don’t particularly like either, but then I came up with the idea of having both – a vertical run of accent tile down the middle of the faucet wall and a horizontal one on the opposite side where we created a sunken ledge. I came up to this when it hit me that we had only been considering contrast in terms of tile color and not the orientation of those swaths of contrasting tile.
So, I thought this week we could look at contrast of orientation in polymer art. It can be such a simple thing to tweak in a design and yet it can make a huge difference in the feel, dynamics, and focus of the work.
Orientation versus Line
I think we need to define a couple of terms before we dive in here. As you’ll see, I’m going to use the words “orientation” and “line” a lot in this post, but I don’t want you to get confused and think of them as the same thing in terms of design.
Let me start out being the master of the obvious for a moment by defining those terms: Orientation is the relative position of an object or element from a particular viewpoint while a line is an element that follows a singular path and whose path can have an orientation. For instance, a bean pod lying on the counter has a horizontal orientation. The seam of the pod, on the other hand, is a line, which, following the length of the pod, will have the same horizontal orientation as the pod’s shape. Crack open that seam and you have a horizontal row of beans as well, even if each bean is sitting up (so each bean itself has a vertical orientation.) That’s because a row is a visual line. However, each item in a row will have its own orientation as well.
In other words, most everything will have its own orientation, including lines, but lines are not the only thing that has an orientation. Their orientation just happens to be very prominent and lines are a common and highly employed design element so I end up pointing them out a lot here.
Below is a more interesting example than a bean pod (although I found this while looking for polymer bean pods because Shelley Atwood, the creator of this pair of earrings has also made bean pod earrings!) Here there are a lot of vertical elements. The overall shape, the snakes of clay, and the row of balls are all vertical. However, the texture on one side runs horizontally within the vertical shape of the earring. And with that, she’s created contrast in orientation.
So, all you have to remember is that a line will have an orientation, but a shape, mark, or edge, also has an orientation. Orientation is like a bigger, more general characteristic of an element while line is just one type of element. Is that all a bit much for a Sunday morning? I wasn’t aiming to take you to class but there you have it!
Cases for Contrasting Orientation
Let’s start with a simple but high contrast example in orientation. This pendant by Kseniya of Etsy shop Solar Bird has a vertical shape but is heavy on the horizontal lines. The contrast in orientation carries this piece. It takes a simple construction – a stack of extruded canes – and creates the energy this contemporary, understated piece needs. The contrast between surfaces (the horizontal lines versus the stack of concentric circle cane ends) creates interest but such a pendant would not have had as much presence if it had been a simple square or an equilateral triangle as those lack the contrast of the vertical shape against the horizontal lines we have here.
Here is another way to work with a vertical shape and introduce contrast in orientation. These polymer and metal earrings by Sue Savage include vertical polymer shapes with diagonal lines in the treated polymer and in the wire, creating a very dynamic, kind of spinning feel to the set.
The elements in Jeffrey Lloyd Dever’s work is a constant study of variation in contrasting orientation. His pin in the opening image of this post has elements that are strongly opposed in orientation. However, how the brooch is worn determines the level of contrast and how it feels when looking at it. If the long central body of the brooch is set vertically or horizontally the individual spines create a high opposing, and thus contrasting, orientation. If set on a horizontal, like it is in the image, it becomes a series of opposing horizontals which isn’t quite as stark a contrast. Isn’t that interesting?
There is one design element on that pin, and in his assemblage piece below, that does not have an orientation but is integral to the design, slowing down all that contrasting energy and giving the eye a place to rest. I bet you can identify what that is.
As you might have noted earlier, I said that “most” objects have an orientation. Well, you are now seeing the one type of object that does not – a symmetrically round one. A circle or a ball has no top or bottom, no sides, no vertical, horizontal, or diagonal edges. It is one continuous curve. Because of that it visually sits still. It is grounded and yet imbued with mild energy. That’s why circles, dots, and balls make such great focal points. So, if you going to go high contrast with lines or orientation, and it feels like it needs to be reined in, a round element may be just what you need. With every type of orientation included in the brooch assemblage above, the ball is needed to anchor all that energy, give it focus, and provide a place for the viewer’s eye to rest.
Let’s look at a more subtle use of orientation that is still high contrast. Sonya Girodon loves contrasting verticals and horizontals, sometimes in very obvious and stark ways, but other times her dedication to these absolute orientations is set in a more understated manner.
In the necklace below, most elements are involved in both horizontal and vertical orientations. The horizontals appear as marks on the clay but are also present in the row of staple-like wires, the two rows of circles (the horizontal emphasized by the lines running through them), and in how the vertical marks are lined up. The staple wires themselves are vertical as are many of the marks and the overall shape of the pendant. This high contrast in vertical versus horizontal within the elements that make up this piece creates a tremendous amount of energy but it is softened and contained by the curve of the central shapes and the circles which, again, create a focal point.
I think by now you must be getting the idea. You can switch up the orientation of elements such as shape, line, and marks to increase, decrease or anchor the energy of your designs. I think we all inherently know this, but how often do you make a conscious decision as to how the various components or elements in your work will sit in relation to the others? I think this may be one of those too often neglected design decisions. But maybe now it won’t be glossed over next time you sit down at your studio table.
I am going to have to leave it at that this week. I have much to do as I prepare to run off to Australia next weekend. I am going to put together something for you to have on the weekends while I’m gone and, with any luck, I’ll be able to sneak in some pics from the trip as well. But as those of you who travel internationally a lot know, you just can’t count on Internet connectivity. And I could really use some unplugged time.
Important Info in Our Recent Newsletter
In the meantime, if you got our recent newsletter or if you are a reader of our other publications (thank you so much for your support of our projects!), be sure to read about the upcoming increases in USPS shipping and why it has become so very important to keep us up-to-date on any change of address.
There is some fantastic news in that newsletter as well – we are having a sitewide SALE! Go ahead, stock up, and take 10% off everything in your cart. Head over to our website here by Thursday (June 6th) and use Promo code Now10.
If you don’t get our newsletter, you can see this edition here and sign up for it on our home page (scroll down … it’s on the right side) here.
We have walls!
For all you fabulous and funny people who are still interested in the house progress here, we have walls and floors and many fewer holes! We still don’t always have a hot shower so we have to get that figured out and soon. But we have had some warm days for the first time in I don’t how long, so it’s been a good week. But the constant checking in with the contractors and this whole designing of the shower tile has eaten up a ton of time so I must run off. It’s a working Sunday for me, which is kind of sad, but it’s going to be worth it when I am snorkeling through the Great Barrier Reef and shooting pictures of curious creatures on Kangaroo Island!
In the meantime, stay inspired, keep creating, and enjoy a wonderful first week of June!
Read More
Tanya Mayorova
Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.
I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.
With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.
Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.
A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.
Beads Beyond the Basic
Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.
Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.
Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.
Tanya doesn’t have a tutorial posted for this, but I can help you with that:
- Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
- Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
- Carefully blend the seam where the ends meet.
- If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
- Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
- You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.
Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.
The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.
I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.
Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.
Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.
These are created by Rebekah Payne who generously posted a tutorial here on how to make them.
A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..
You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.
The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!
Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.
Beads Away!
The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.
There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.
- My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
- Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
- If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
- Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
- For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.
Holes
Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!
For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.
There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!
However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts
Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!
Read More
Do you ever stop to ask yourself if what you create makes you happy? It seems like a silly question since creating is usually passion driven so being able to feed that passion should make you happy, right? But have you ever found yourself creating something because you believe it is the kind of thing other people would like but later realize that you don’t enjoying making it?
I found that happened a lot when I was a selling artist. You get wrapped up in what you think the market would want, what you think will sell best at the next show, and you’d be just making things for the money and not because it’s what you want to make. Other times we think that in a particular material, like polymer clay, it is best used for certain forms such as jewelry and home decor. But as we all know, polymer can do almost anything and yet 85% of it being created and shared online is jewelry. Jewelry is pretty fun stuff to make, sure, but if you enjoy polymer, just keep in mind you don’t have to make jewelry.
I myself have been moving away from jewelry. A pendant or pair of earrings are oftentimes still the best items to create to show off a polymer technique for a magazine article or tutorial but more and more, I create objects without an end goal in mind and am really enjoying just making little objects and samples of techniques. Last year, I started to see patterns and connections between them and eventually started putting them in shadow boxes. You can see an example of one of my “specimen” boxes in the latest Polymer Journeys book, if you’re curious. I’m also trying to devise a class for doing it. It’s so much fun!
But when I have to create jewelry because I am vetting an article for the magazine or want to make a gift, I have lately found that I don’t look forward to the engineering of it – figuring out how it is going to hang, what stringing material will work best, what findings I need, as well as worrying about comfort and durability. I find I don’t want to think about those things when I create and it’s not out of some kind of laziness, it’s just not what I want to spend my mental and creative energy on, and I’m good with that. I just really want to follow creative paths that make me happy right now.
To that end (and because I’ve spent so much time in tile stores lately), I’ve decided I might just focus on tiles for a while. They are a very freeing form. A tile is just a canvas for 3D materials. You can do whatever you want on them. You can make them any size, any shape, and can attach whatever you want or attack it however you want. I think we really should all give ourselves the freedom to play with this form, to let ourselves be free to create from the heart with a material we love. At the end of a session of tile making, you may find you are really looking forward to creating necklaces or making beads or covering vases. But I am going to suggest you give a tile a try here and there to just let yourself create freely. Doing this can help with your designs in other forms.
To that end, of course, I’m going to share some tiles this weekend. I am going to share a lot of non-polymer ones because I think, if you’ve spent any time online, you’ve probably seen your share of polymer tiles these last few years, especially with the Fimo 50 year challenge a couple of years back and with the common inches exchanges (inches are just tiny tiles). So, I’ve got a quite a mix for you but it is all art that can translate to polymer even if it is in another material.
Laying it All Out
The opening image of this post is a photo from a class conducted by Laurie Mika. She is well-known for her colorful and intricate collage/mosaic pieces which, by the way, she teaches at various events. This collection of student work was from a polymer clay tapestry class she taught at the SAMA (Society of American Mosaic Artists) conference in Nashville just a few of weeks ago. They are all just lovely. There is no high-end technical skill needed to put these types of things together which makes them ideal for exploring color and texture and just letting yourself go. (You can check Laurie’s workshop schedule on her website.)
Jael Thorp caught my eye some years back with her “clay doodles”, including the one below. I thought they looked like zentangles for clayers. Can you imagine the flow state she must’ve been in to create this? You can just get so completely lost in this kind of work and that is a big part of why people find tiles such a wonderful creative outlet.
Check out this post with her various doodles from some years back. She went on to refine her technique, making beautiful beads and home decor with the same type of application. You can find them on her Flickr photostream.
Let’s move from polymer to ceramics now. It is a rare thing in ceramics that can’t be replicated in some fashion in polymer so I find ceramic art quite inspiring. Here is one of my favorite tile makers in ceramics, Chris Gryder, who has gone a bit more three-dimensional of late but his tile compositions are timeless.
In this composition, each tile is its own separate piece but he’s connected them all with these lines that he creates through the grid of tiles. So, really, you can make a whole bunch of tiles without worrying about what they’re going to end up as, and then, if you want to put them together as a composition because they have a similar or complementary set of color palettes, textures, or motifs, you can use lines that flow throughout to visually connect them for a larger composite composition. This approach would allow you to just make tiles as the muse directs and then you can later make them into a larger wall piece.
If you like this piece, go browse through his website or his Instagram page for more fantastic inspiring wall compositions in tile.
Keep in mind, just because tiles start out flat, they are not two-dimensional and you can create extremely three-dimensional pieces on them. Here’s one example with some very organic forms and textures created by Lauren Blakey, another ceramic artist.
And here’s another three-dimensional example in glass by Shayna Leib.
As you can see, tile work is open to all types of materials so keep that in mind as you sit down to tile. Mix in anything that your heart and muse desires. Mix and match mediums, embed oddball trinkets you’ve kept for, as yet, unknown reasons, and just keep an open mind.
After pulling these examples for you, I realized that all the examples are squares here. You don’t have to create square tiles to play with but that is the more common form. However, if you’re not feeling square, try a free form shape or an oblong one or maybe, because today is Mother’s Day, create a big heart for all the mothers out there. Happy Mother’s Day to all you amazing women!
Here’s a heart from Tina Ruppert of Wisecrackin’ Mosaics on Etsy. Pick a favorite shape and a bunch of canes or other scraps of clay and you can do something along these lines as well.
Getting Squared Away
I’m going to leave you with these thoughts and hopefully some curiosity about playing around with a tile or two, in whatever form and techniques interest you. If you need some jumpstart tutorials, here are a few places you can go:
Sara Evans has a video about her tile making process here – https://www.youtube.com/watch?v=9FAxYwgJfLo
If you want to do something tile like but still want it to be something functional when done, maybe you would like this polymer clay tile box tutorial –
https://mermaidsden.com/blog/2015/02/12/polymer-clay-tile-box
Or have fun with one of our true masters of polymer clay tiles, Chris Kapono, with her very detailed and yet tremendously fun tile project in the Polymer Arts Projects book which you can purchase and download digitally if you need it immediately or order the print edition from our website.
I opened with a discussion about doing what makes you happy and hope it gives you some food for thought. If you want to hear a couple of transformative stories in that vein, please be sure to get your copy of The Polymer Studio Issue #2, recently released, which starts and ends with stories about finding one’s happy place with one about Christine Dumont’s studio complete with a visual tour, and the other about Donna Greenberg’s focus moving from jewelry to large wall art. Check out the Issue #2 Sampler if you haven’t seen the new issues yet.
We’re daily trying to find are happy place over here as our house has continued to be demolished more and more, beyond what we (or our contractor) expected even. Old plumbing can be a tricky thing! If it would just warm up here, it wouldn’t be so bad. A cold Southern California in May is just weird.
I’d share progress shots of the house but it’s pretty much just down to studs and busted up concrete floors. Oh… And a large trench across the whole of the front yard for a new drain line. I’m thinking about making it into a moat. Like a habitrail (if you remember those hamster houses) for our pond fish. They could just swim circles around the house! Okay, probably not but gotta have fun with all this bedlam, even if it’s just dreaming up nonsense like that!
I hope you all have a wonderful Sunday and Mother’s Day! I’m off to have mimosas with the family’s fabulous females myself! Enjoy the day and your coming week!
Read More
Kathy McCurry, Bearded Sadie
Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers
So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.
Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.
Flower Power
first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.
What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.
It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.
Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.
Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.
Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.
Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.
But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.
Moving on From Flowers
To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!
The Polymer Studio, Issue #2 … click the image to see a sampler edition
Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.
Looking for your already purchased copy?
If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.
Print editions of the new issue went to the post office Wednesday directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.
I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!
Read More
