Growing Fond of Dots
March 14, 2017
Inspirational Art
I’m going to use this to both wrap up my jabbering about the Spring issue of The Polymer Arts and as a segue into talking about a design element that seems rarely discussed … the dot. Or spot. Or point on a surface. Whatever you want to refer to it, dots or spots are an unassuming but strong design element. In polymer, we can give them dimension and form until they take on another life entirely. In Donna Greenberg‘s work, those organic gatherings of points definitely look to be alive.
We were so lucky to have another wonderful article by Donna in the latest issue, The Polymer Arts Spring 2017 – Shape and Form issue. She discusses ways to use your past work to inspire new work. I think most of us have tried going back to something we did before but her suggestions are a bit different and her examples are beautiful. She does a lot of these dot/spot barnacle-like cups in her re-formed work and in her latest vessels too.
Although the form of the ‘spots’ seen here are similar, the way they are used and gathered are not. Look at the one on top. It had an organic feel but the little cups and the spots are placed in a very orderly fashion. The rougher but lacy edge builds a balanced but dynamic tension, pulling away from the inner order. But the platter below is a purely random application with the gathered dots of different sizes flowing in a natural path through and around the piece. It’s less restricted nature also warranted the use of a brighter color, making the piece quite lively and cheerful.
I found these pieces on Donna’s Facebook page but also take a look at her barnacled beauties in the latest issue of The Polymer Arts or hop over to Donna’s website to see more of her dots and spots.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
A Feast of Canes
March 7, 2017
Inspirational Art
The Spring issue is out and as usual, there is a bit of chatter on it out there in the social network world but there is an unusually high level of enthusiasm out there this issue. Is it that fabulously colorful cover? The wide variety of articles by or about amazing artists like Donna Greenberg, Christi Friesen, Wiwat Kalmpornjiwit, and Sylvie Peraud? So far the most talked about articles are the Lariat making, Donna’s inspiration from the past and Christi’s treatise on armatures which was pretty eye-opening since she picked the brains of some of the most amazing artists for which armatures are essential, namely Ellen Jewett (with that incredible opening piece!) and Adam Thomas Rees who I knew built his own animal shapes but had no idea how he did these huge things. But Christi revealed that for us.
The one thing we couldn’t do in Christi’s article was blow up some of the images so you could really see the detail of the work these artist’s do. Adam layers canes onto animal shapes in a manner reminiscent of Jon Anderson though they were developing their work around the same time so I don’t think Adam came to this idea from seeing Jon’s work although either of them may have influenced the other since. But other than canes on animal shapes, they have different approaches. Adam’s pieces are huge and his canes are large, broad patterns and often very bright. He sometimes mixes up other sculptural textures and additions to his creatures that create a feast of interesting details for the eye to roam over. The hanging matted hair like texture built up on this one creates a swath of white to give the eye a resting place below all that intense color and pattern above.
Just open Adam’s website and try not to be startled by the creature staring out at you. It’s beautiful but intense! Take some time out today and enjoy Adams colorful patterns in his galleries. And grab your copy of the Spring issue of The Polymer Arts on our website here.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
The Dumont Collection
July 13, 2016
Inspirational Art
I can’t tell you how wonderful it was to not only see, live and in person, the latest work by the meticulous Christine Dumont but to see so much of it in one place. You can tell she spends hours getting every element just right, and I can only imagine how many hours she puts into developing her process in which she can achieve such perfection. The pieces here are examples for classes or are show pieces for the Fimo exhibition at Eurosynergy and not for sale, but I did get to try on and model a few for the gang and I was just in love with how they both looked and felt on. They are some truly masterful pieces of art.
Christine has not only been diligently working away on her own pieces but has continued helping others increase their creativity and exploration of design through the classes offered on Viola.eu. Take a look at the new set of courses she and Donna Greenberg are working on as well as dropping by Christine’s artist website for an eye full of her beautiful collection of work.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
A Greenberg Arrangement
July 11, 2016
Inspirational Art
I am getting into the week of Eurosynergy and I have a completely full schedule, so while I am collecting photos of the event and the wonderful art around us, I will fill this week with images from the art shared in the week before. But I will share a ton with you next week!
Since so many of you just loved seeing Melanie West’s table of amazing work, I took more photos of the collected works that were shared in Durfort. This lovely little arrangement, by Donna Greenberg, was taken on an old fallen wooden door which became a favorite spot for shooting images of the work we had. Donna’s organic and expressive pieces seem quite at home on the weathered background. Donna was actually telling us how she has been experimenting with photographing her work with more objects and context. That can be a tricky thing as busy backgrounds and additional objects can be distracting as the rusted hardware here is threatening to be. But if the work can hold up to it or the objects used match the piece in a subtle and supportive way, including a bit more in the images of your work can create some really eye-catching photos that will make your work stand out.
Speaking of stand out work, jump over to Donna’s website to take in the wonderful range and luscious texture of her pieces.
Inspirational Challenge of the Day: Take photos of your work in different environments and with (or on) a variety of objects. Take a look at the photos and see if the change in surroundings works visually with your work. Does it give you any new ideas about how to photograph and show your work?
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
A Glimmer of Hope. And Jewelry Furniture.
April 4, 2016
Inspirational Art
Last month was a very long month. So much was going on only now can I see the light at the end of the tunnel, a glimmer of hope, a spark of optimism that all of our special projects will be wrapping up. So in honor of those glimmers and lights, how about a few slightly blingy things this week?
We’ll start with some new Donna Greenberg earrings. Seeing a new piece of hers always brightens my day. And I do love those cool jewel tone shimmers. These are not overly complicated but I am very much for simplicity right now. The shiny side kind of hangs out there like a beacon of some kind.
But I also wanted to share this because look … she made her own stand, or jewelry show furniture, as she calls it. How fun and fabulous is that?
See what else Donna has been up to on her Facebook page, where I found these, and her website.
Inspirational Challenge of the Day: Create your own style of displays for your work, something completely different from what Donna made. Displays can be artistic, but be careful with heavy patterns and colors brighter than your work. You want your work to stand out, not your stands. Search online for DIY display ideas to help you out. These kinds of projects are prefect for dipping into your scrap bin. You can paint or powder mud colored clay displays to bring them back to life.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Summer is Coming! Peek at the Cover of the Upcoming Issue.
May 1, 2015
Inspirational Art, The Polymer Arts magazine news
So, we start out the month of May with a sneak peek at the cover of the upcoming issue of The Polymer Arts, the Summer 2015 – Connections issue. On the cover, we have a fabulous variation of Izabela Nowak‘s Polymer Origami technique–and yes, she generously shares her polymer origami techniques and tips with us in this issue!
As has been the recent trend, this issue is filled to the brim with new ideas, techniques, lessons and tips along with lots and lots of eye candy by some really huge and inspiring artists. You can look forward to articles such as:
–Create Polymer Origami Beads by Izabela Nowak
–Moving Magnetic Focals by Helen Breil
–Connected Color: Throwing out the Wheel by Tracy Holmes
–Connecting to Inspiration Beyond Polymer by Donna Greenberg
–Visual Unity: Designing the Big Picture
–Polymer Jeweler’s Workbench: Cold Connections
–Rivets: Attachments & Accents for Polymer
–Simple Cold Water Transfers
–Mind Mapping: Creative Visual Brainstorming
–Of Drawing, Doodles & Design: The Role of Sketching
… and much more.
The issue is due out at the end of the month. We don’t have pre-orders for individual issues up just yet, but we’ll let you know when the website is updated for that. You can, however, subscribe to be certain you’ll be getting every great new issue when it comes out. www.thepolymerarts.com/Subscribe.html
As mentioned in the blog post yesterday, we’ll be trimming down the number of posts for the month of May, and I’ll start that by taking tomorrow off from the blog to work on other needed items to get this great issue out ASAP! We will see you here on Monday, though. Have a beautiful weekend!
If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.
Try a New Form
December 30, 2014
Inspirational Art
We definitely have a penchant for making jewelry in this community, but have you tried other forms to see if you have an affinity for other forms? Non-jewelry forms can be very freeing as engineering them is often less complicated. There are a lot of people trying their hand at home decor objects, decorating furniture, covering sculptural shapes and applying polymer to clothing.
One of the most interesting explorations in this area this last year, at least from what I’ve seen, are the vessels Donna Greenberg has been busily creating. I don’t even know how to explain her journey, but she has really been pushing her form and application of her clay treatment in some really intriguing ways. I’m going to leave it at that and give you this beautiful close-up of one of her newest creations to get your interest piqued. Then go on over to the Donna Greenberg Arts page on Facebook to see the many pieces she’s made and her journey itself.
Then I might suggest you spend a little time on Pinterest or Flickr seeing what else people are up to these days. Perhaps you will find a form that you just must try this new year.
If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.
Dialing in From Frankfurt with French Polymer
April 28, 2014
Polymer community news
I have been traveling for 16 hours as I sit down to write this and I have another 7 hours to go before I reach the hotel in Malta. Every change of scenery, the many different people, the variation in languages is enervating–I’ve been trying to guess people’s country of origin based on jewelry and clothing but you know what … people are more or less the same everywhere. It’s still been a fun game. I just wish I was more awake to really take it all in here. Many polymer people are already in Malta. See if you can sneak a peek on Donna Greenberg’s Facebook page–she’s taken some amazing pictures of the places in Malta she and other polymer peeps got out early to see. I just can’t wait to get there.
My opportunities for photos as well as a decent Internet connection while traveling have been slim so instead of sending the overcast images of Reykjavik and Frankfurt this will be simple and brief and get in some info I couldn’t squeeze in last week about polymer in print.
If you don’t know about Polymere & Co., it’s the newest magazine on the scene and the first one of its kind not in English. The French language magazine focuses on project tutorials and jewelry and is available in both print and digital editions. Even if French isn’t your language, don’t let that stop you from getting a copy. Get the digital and plug the articles into an online translator. In this day and age there is not any reason to stay away from publications simply because they aren’t in your language. What a wonderful time we live in!
Editor Beatrice PICQ will be joining us at EuroSynergy to talk about why she started this magazine. I’m so excited to talk to her and hear about her vision. Because at this point, there is definitely still room for more quality polymer instruction and inspiration.
Okay … I’m off to get myself set for my final leg to Malta!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Build a Basic Ring
April 13, 2014
Technique tutorials, Tips and Tricks
Now that we’ve been looking at rings all week, are you not excited to try your hand at this form or expand on what you’ve done in the past with rings? There are a number of online sources including classes at Craft Art Edu or the expansive article on creating rings in the Winter 2012 issue of The Polymer Arts as well as a number of online tutorials. The article in our 2012 issue has easy instructions by Donna Greenberg on how to make a polymer band for a ring base but if you’d prefer a metal wire band, check out this straight forward tutorial by Elena Samsonova, a Russian born artist living in Connecticut in the US.
To get the first half of this tutorial showing you how to build the wire wrapped ring base, go to Elena’s Flickr page and then peruse other lovely work and ideas of hers while there. For more of her tutorials as well as more of her work, visit Elena’s website as well.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
- « Previous
- 1
- 2
- 3
- Next »

Meredith Dittmar’s work is, surprisingly, freeform and spontaneous although her intention to “explore, illuminate, and break down the boundaries of the conditioned self” are well supported in her design choices.
Did you work on identifying colors similarities and contrasts, even though I was unable to get anything out midweek like I’d hoped? I ended up with an exceptionally busy week but, unlike many of these past months, it was mostly good, positive things going on. I’ll catch you up on some of that stuff at the end here (including notes about my latest big sale if you’re interested) but, this week, I thought we would take a break from the intensive design lessons so I could get back to writing what I call creative growth articles.
These kinds of articles were included in every Virtual Art Box but I had set them aside while we thoroughly explored color the past few months. I’d like to do these at least once a month now to keep you thinking about why and how you create and to give you a break from the lessons here and there.
The Question of Conscious Intention
When I started the Virtual Art Box, the first thing I wrote about was artistic intention. It was easily the most impactful thing I’ve ever put out if measured by the enthusiasm and number of the comments, messages, and emails I received and, if you read this blog regularly, you’ve probably noted that intention comes up over and over again. But I realized, after an interesting conversation recently, that I’ve never really talked about the variety and ways creative people approach intention.
The core question that came up in this conversation was about whether the person creating has to be consciously aware of their intention in order for the design to be intentional. In other words, can decisions be intentional without being understood by the creator? Sounds rather philosophical but it is, in truth a very practical and rather important question.
By definition, intention means that you have some knowledge of your motivations but, it doesn’t necessarily mean that you are wholly conscious of them, not in a detailed way that allows you to verbalize it to yourself or others.
For instance, you could head to the grocery store intending to get something for your sweet tooth but you may not realize what you want until you’ve wandered through the bakery section and the candy section and then found yourself entranced by some caramel gelato in the ice cream freezer. Alternatively, you may have specifically headed out to get a pint of Talenti Caramel Cookie Crunch. The intention, and the outcome, would be the same for either trip out but there was a varying degree of awareness as to what you were after.
This works the same way when it comes to intention in art. You aren’t just fully intentional or not intentional in your design choices. There are variations and degrees to which you understand and apply your intention as you create although, I will argue, having some intention is necessary.
First of all, understand that when I talk about intention, I’m speaking about the concept, story, or theme that directs your design decisions. In the shopping trip example above, the intention was to satisfy a sweet tooth. In your artwork it could be anything from re-creating an image or place to telling a story to relaying a message to simply sharing your aesthetic tastes. But that intention guides your design decisions.
You could, for instance, choose round shapes for a pair of earrings. That choice might be made because round is a soft shape and the theme or story or idea behind your piece would be best supported by soft characteristics, but it also could be a gut feeling that round feels right compared to squares or triangles or amorphous organic shapes. If you have strong instinctual reactions to certain options for your design, you can absolutely make decisions based on that intuition. You just need to check that it supports and is related to your intention rather than it just being something that you are drawn to in general.
The Role of Instinct
Instinctive decisions are very common in many artist studios but they work best when there’s knowledge behind them. If a creative person is well versed on design, they will likely transition to working almost wholly by instinct at some point. That education and understanding works away in the background, guiding the artist’s instincts, but when they run into a problem, they still have the ability to puzzle out possible solutions based on the knowledge that they have. That is actually the primary intention that drives all my publications and this blog – to get you to the point where you understand design well enough for your design decisions to be instinctual. That way, you can approach your creative work with anything from a general to very specific intention and can begin to make purposeful decisions from the start.

Donna Greenberg’s latest post on Facebook: “WIP. Glazed bubbles and supporting texture coming in on this bad boy. Miles to go but each step helps me clarify my idea and even surprises me at times.” Because of the size and complexity of Donna’s vessels, planning has to be fairly well thought out before she really gets going but she leaves lots of room in her intention for discovery and alterations (via those clarifications she mentioned, I’m sure.)
There is also an argument in the art world that proposes that the artist does not have any responsibility to create with an intentional concept, meaning, or story for each piece, suggesting that it is completely up to the viewer and not the artist to give the piece meaning. I can’t say that I disagree with that but, if you create without any direction or some kind of framework to work off of, I think it becomes rather hard to create cohesive work that is meaningful to viewers.
I know, I am getting all abstract here so here’s a concrete example. Let’s say you want to create an eye-catching, one-of-a-kind piece to be showcased in your booth at the next fair or on the opening page of your shop’s website. You could just sit down with your materials and mess around with them until something comes out of it that you like. That is a valid way to design. But how do you even start doing that? Do you work with just whatever happens to be out on your table or do you pull out your newest, coolest materials and tools or do you open up your drawers and cupboards and stare at them until something jumps out at you (you know, kind of like when you stare at the fridge contents trying to figure out dinner)? I think we’ve all started something in this rather mindless way but how often are we successful compared to when we have some bit of intention?
Never Face a Blank Canvas
It is often said that facing a blank canvas is the hardest step in creating because it is, as yet, directionless which can be rather daunting. However, if you look for your intention first, then you never actually face a blank canvas. Instead, you come to that blank space or yet to be formed material with something to work on already. It’s the difference between walking into the grocery store only knowing that you want something to eat versus knowing you specifically want something sweet. You might not realize what you want is the gelato but at least you know where to head off to when you walk in those doors. Otherwise it is a lot of wandering up and down the aisles and that can be frustrating. You might not even make it that far. You might just turn around and leave because you don’t know which direction to take.
So, I do think you need to have something to work off of but it doesn’t always need to be something that you understand well enough to explain to someone. That was actually one of the hardest things for me in graduate school as I work towards my MFA in Poetry. Every word I chose in a poem was very intentional but a lot of the time there was more a feeling of it being right than an understanding about why it was right and yet, I was called on to explain my work all the time. I could always explain the theme of the piece and my inspiration but I could not always explain the specific significance of an image or sensation in the poem. To be honest, I think my lack of explanations was partly a kind of rebellion against the dissection of creative work. I know a lot of you feel that way too, that some (maybe most) art should be a visceral experience not an intellectual exercise.
However, trying to glean understanding from a piece of art, writing or any other creative work can be very satisfying so I’m not saying that I don’t think art should be approached that way. With some work, that’s the only way to approach it. And I did eventually come to the understanding that, as creatives, we can learn so much from that kind of examination but I also don’t think we need to do it all the time. I mean, there is some work we may want to just enjoy for what it is.
It can be the same in regard to how you approach intention. You might just want to enjoy the creative process and let your fingers and mind take the designs where they will. That’s great, especially if you are doing the work primarily because you enjoy the process. In that case, intellectualizing your intention can take away from that visceral experience but I will still argue that you need something to guide your design choices , even in a general way, if you want to arrive at the end of that process with a well-designed and engaging piece. Alternately, fully understanding your intention and planning out the details of a piece will allow you to boldly move forward as you work but you may also want to allow for modifications as your ideas and construction may change as you work.

Celie Fago may have a penchant for some pretty intense planning if this sketchbook page is any indication. She shared this with Dan Cormier for the Broken Telephone project article published in the Fall 2013 issue of The Polymer Arts (available in digital if you want to grab a copy here.) The objective was to create a brooch inspired by another artist’s piece that was sent to her. Her notes start off with “What Do I Hear? (when listening to Dave’s piece),” followed by a list of descriptive words as a way to search for her intention. That leads her into an exploration of design possibilities that support that intention. (Click image for a larger version.)
So, I think the best way to think of intention is in degrees of awareness. You can be fully aware of your intention and be able to verbalize it in detail, you can access your intuition with a more general idea driving your choices, or it can be somewhere in between.
I think the most important thing is that you make all of your individual design choices purposefully whether or not you fully understand your reasons. (I mean, I have no idea what I like caramel gelato so much but the lack of understanding certainly isn’t going to stop me from enjoying it!) Just try not to allow your design choices to be decided for you. Like don’t just default to a smooth surface because that’s how your clay comes out of the pasta machine. Choose a smooth surface because that is what best supports your intention. Purposefully choose shapes that support the concept you are inspired by rather than determining them based on your available cutters or because organic shapes are easiest to create freeform. Pick colors based on symbolic or emotive qualities not just what you have on hand. And ask yourself, every time, whether your piece will benefit from lines or marks or if there shouldn’t be any so you don’t miss out those possibilities.
These kinds of purposeful decisions will show a controlled and skilled intention, creating depth and cohesiveness and, likely, a lot more satisfaction on your end as well as in your finished pieces.
Dare I Say Winds Are Changing (in the Right) Direction
Yes, I’d hoped to do a midweek blog last week with some more examples about how to look at color and pick contrast and similarities, but not only did I have a busy week taking care of my husband after his biking accident (he is healing amazingly well and quickly, thank you all for asking!), I also had the opportunity to bring a staff member back on board so I’ve been getting her up to speed and we start work on possible new projects this coming week. It’s going to be so nice not doing this solo!
Also, you all really took advantage of the Damage Sale! I am nearly cleared out although, as I write this, there is still a small handful of slightly imperfect publications on the Specials page if you want to grab up those last $4 magazines and $12 books.
Then I got so excited about how cleared out the shipping room was looking (I’ll need the room to bring in new publications!) that I added a 25% off sale through September 15 on all regular print publications. No coupon code is needed if you want to take advantage of that. Just go over to the website.
So, there has been a ton of packing and shipping this week which not only kept me busy, it also made me more aware of an issue I’m having with my bad right arm. It’s kind of worked into my shoulder. But I saw a new orthopedic doctor and he had some wonderfully encouraging things to say so this coming week I start a new and different regimen of physical therapy that he believes will actually heal my arm. I am reservedly hopeful!
So, I’m busy but relatively happy over here. I hope to have some concrete new project announcements after this coming week. It’s been such an aimless, up in the air kind of year for us all, hasn’t it? I look forward to having a production schedule of some sort to keep me feeling relevant and to keep you inspired. So, keep fingers crossed!
I hope all of you have had your own dose of good news, light at the end of the tunnel, or other positive developments. I’m sure we could all use a bit more of that right now. So, keep an eye on impacts for incoming upcoming newsletters and announcements. In the meantime, take good care of you and yours!
Read MoreHave you ever made a polymer ring? It’s not one of the most popular jewelry forms in the medium which seems a little strange because they’re fairly easy to make. Maybe it’s a durability question – will the polymer ring stand up to the knocking and scraping rings have to go through? I’m not sure how they would fare if worn day in and day out but I, myself, have several polymer rings which still look as good today as the day I made them and the unusual and fantastic things you can do with polymer make them a really eye-catching piece of adornment that you’ll get lots of questions about an attention for.
There are so many different types of polymer rings you can make. You can wrap clay onto a form such as small glass bottles, sockets (for socket wrenches), and short bits of metal pipe (try pipe connectors.) You can skip the ring construction and just apply polymer to a metal ring blank. They come as bands with open channels that you can put canes and veneers in, or with a blank bezel for cabochons or sculptural elements. You can also simply create a block of clay that you punch a hole into for the finger to go through. Alternately, you can free-form the ring by hand, cure it, and then carve it into the shape and size you need. There are so many ways to make rings!
The one downside about rings, especially if you are selling them, is that you will need different sizes. Making a selection to show the style but then offering custom-made rings is one way around this but the other way is to just make simple rings that you can create a lot of and only in three or four popular sizes. This way you have those smaller inexpensive, impulse buy items to sell at your fair booth or online. And rings are easy items to sell especially at an inexpensive price point. They’re fun little bits of adornment and you don’t even really need them to match your outfits!
But if you want to create and sell one-of-a-kind rings, choose an average ring size and keep the band thickness and style wide enough to either sand down to create a larger size or add a layer of clay to create a smaller size. There are also adjustable ring blanks if you just need a base for attaching your polymer forms and elements onto.
So now that I have you thinking about rings, let’s take a look at some great polymer ring creations to further get your inspiration going.
Let’s start with one of those ring blank ideas. Here Janine Müller shows how creative you can get with a ring bezel. It doesn’t need to be a solid polymer cabochon. It can be layered or carved or hand-tooled or drilled. I’m not sure what her approach is here but the take away here is that you can try your own preferred surface treatments to create a unique ring in a bezel blank.
If you want to try an all polymer ring in a quick and easy but fun form, roll out those clay sheets and try a stacked set like these ingenious mix-and-match rings by Florence Minne-Khou. Clean cuts and a little sanding is about the most difficult aspect of a project like this so there’s hardly any excuse to not try it.
If you like getting sculptural with your work, you can go in a number of directions. Keep it simple but elegant with uncomplicated and cleanly shaped rings. Start by wrapping them around a solid form to start, and then sculpt the clay. These pieces from Angela Garrod are likely created in that fashion.
Or swirl them well into the third dimension with a folded form like this intriguing finger form from Sona Grigoryan.
Or just go completely wild and don’t worry about the functional aspect. Just make something out of this world. Perhaps this rather celestial feeling ring by Donna Greenberg will get you to push the limits of what you can do with a ring form.
If you are primarily a cane clayer, don’t think that rings–even sculptural rings–are not for you. Take note of Jana Roberts Benzon’s creative cane slicing and build up your own gorgeously detailed rings.
Oh, I could keep going with these! Just put “polymer rings” into a search on Pinterest, Instagram, Etsy or Flickr and you’ll see a ton more to get you thinking. But if you want some step by step instructions to help get you started on what could be a really addictive form, try this block cut ring tutorial from Ludmila Bakulina aka Sweety Bijou. This would be good for scraps too!
Okay … going to have to cut and run but I hope I have left you with some exciting possibilities. I’m on the road today but will be back next weekend with more food for thought and pretty things to ponder. Also, don’t forget to pre-order your Polymer Journeys 2019 before the 22nd. Release date is now March 2! Get yours at www.tenthmusearts.com
Read More
This week is going to be a series of announcements but I promise, they will all be very exciting, they will all be polymer, and they will all give you something you can look forward to as we move into fall and winter (or spring and summer if you’re down under.)
First up… I can finally announce and show off the cover of the first in an upcoming series of books, Polymer Art Projects. This series arose from your consistent request for more projects and a desire to support and promote our great artists, so, after many conversations, I came up with this cooperative book project. All contributing artists in the book will be part of a promotion and profit sharing team. That means they are highly motivated to provide you with some truly fantastic material on top of looking forward to sharing their love of polymer art.
For less than a couple of dollars each, you get 16 tutorials that will expand your abilities under the guidance of some of the polymer community’s best instructors. The skill level of these tutorials range from the experienced novice to the intermediate artisan, with tips and ideas for polymer crafters of all levels. The tutorials are very detailed, each showing off a variety of techniques, expert construction, and lists of ideas for variation so you can create your own unique pieces from what you learn.
The first in the series, Polymer Art Projects—Organic, includes tutorials by Donna Greenberg, Christi Friesen, Eva Haskova, Anke Humpert, Debbie Crothers, Kim Cavender, Stephanie Kilgast, Chris Kapono, Stacy Louise Smith, Nevenka Sabo, Adriana Allen, Dani Rapinett, Fabiola Ajates, Rebecca Thickbroom, Klavdija Kurent, and little ol’ me. Projects include a variety of jewelry as well as home decor, all inspired by mother nature.
Check out the cover for a sampling of what you can look forward to. The cover price for the print edition of this book will be $23.95 but for the next month, you can preorder for $16.75 – that’s 30% off the cover price. Or maybe you’d like a digital edition which will list for $15.95 – you can preorder the digital edition for just $11.95. These preorder prices are good through October 10th.
Don’t forget the last issue of The Polymer Arts comes out September 22. Preorder this last historic copy on The Polymer Arts website.
Read MoreWe can’t talk about wall art right now without bringing up Donna Greenberg’s newest series—BioSystems. She’s creating these amazing conglomerations of organic shapes, bursts of color, and all kinds of variation of texture in these wall pieces.
Like Pavla’s piece on Monday, there is no particular focal point in these wall pieces. However, there is a flow-through from one set of shapes and forms into another through the use of repetition and a gathering of color that defines multiple paths from which one can explore this visual adventure.
This series was an adventure for Donna herself as she wanted to work on something that she was inspired by without concern for the selling of the artwork. Ironically, these pieces have resulted in numerous commission requests. I love that because I have long believed, since my days of being a full-time artist trying to read the market, that if you put yourself into your work it will speak to people and the sales will come.
So, I say, create what pleases you, that which is drawn from your passion, and your vision will come through in a more original and meaningful way, creating work that will please both you and many a customer.
Do set aside some time to explore the other pieces in the series as well as the photos that show the different views of the work. You can do so on Donna’s Facebook page and Instagram.
Read MoreGuest Blog Post by Donna Greenberg
We don’t seem to talk much about emotion or mood in polymer art. We share a lot about color, design, construction, and problem-solving, which are all necessary and practical ideas, but seem to shy away from work that is clearly emotional, thought-provoking or even frightening. Although not a polymer artist, Beth Cavener’s work takes this subject head on with her large-scale animal sculptures and offers us food for thought, especially those of us that love to create human or animal sculptures.
Hares, foxes and other familiar and beloved creatures in folklore are given uncanny human-like facial and bodily expressions, making us look twice at Cavener’s sculptures. Occasionally she will even add a decidedly human body part to the animal, yet manages to do this in such a way as to make it seem quite natural. Her creatures seem to have been frozen in a moment of action, often expressing fear, uncertainty or other primitive human instincts. If we look closely, we can almost see our own human emotions reflected in them. It’s not always comfortable to witness these works, but Cavener’s attention to every detail, exquisite craftsmanship and control of the narrative masterfully lures us into her world nonetheless.
Her sculptures are also technically brilliant. The artist methodically goes through multiple steps during weeks and months of creating thumbnail sketches and numerous small maquettes, and then makes many changes in designing the right armature before she even starts on her final work. Yet as traditional as some of her methods are, she still has no fear of flouting “rules” when it comes to achieving her desired look. Interestingly, Cavener ignores most ceramic glaze-type finishes in exchange for basic household latex paint, an action that is often frowned upon in purist ceramic circles. Keeping a limited color palette helps support the mood as well as shows off her prodigious sculptural handwork. Surprisingly as well, she will sometimes incorporate classical delft porcelain colors with elegant Japanese-style tattoo designs such as those on the snake in “Tangled Up in You” which adds a soft, accepting moodiness to an otherwise disturbing subject. Combining all these disparate artistic goals in any single piece could easily become a messy affair for many of us, but in the hands and mind of a master like Cavener, it all comes together beautifully.
See more of Beth Cavener’s striking work at her website.
Check out the new “BioSystem” wall works from Donna Greenberg on Facebook. This is a brand new series incorporating her love of organic forms such as lichen, fungi, and corals with her interest in painted details in a true wall-hung format. Her self-challenge is in combining multiple intricate complex forms with a limited color palette to create depth and dimension with a strong yet subtle outcome. Visit Donna’s website here.
Read MoreOur upcoming Spring 2018 issue is finally coming together, I am happy to say, and it’s set to come out the last week of February!
We are very lucky to have Doreen Kassel as our Color Spotlight artist as well as the cover artist for this issue. Lindly Haunani did a wonderful job of getting Doreen’s thoughts and secrets out of her to share with you all.
Also in this issue …
- We have an amazing article on how to plan and create lifelike miniature versions of just about anything by the prolific Stephanie Kilgast.
- I created a tutorial and sampler article on numerous ways you can decorate and design with tiny bits of clay including clay embroidery, faux filigree, granulation, cloisonné, and a few things I don’t have a name for but all so much fun to do.
- We’ve compiled a ton of secrets and tricks into a step by step guide to cane reduction that is not to be missed.
- Spend time in the world of Donna Greenberg, from her days as a big interior mural artist to her big ideas in smaller polymer packages, in an in-depth interview by Anke Humpert.
- We picked the mind of Laura Tabakman to find out how large installations art projects are started, planned and completed.
- As requested by numerous readers, I put together an article based on my Synergy 4 presentation on how polymer art fits into an environmentally conscious world, with my research and conclusions that are probably not what you would expect.
… and much, much more.
You can start or renew your subscription or pre-order your copy on our website here.
Read More