A Little Faux Lampwork

May 15, 2013

Wow … thank you all for chiming in with your comments and emails on what to do with the rest of the week. It’s really very cool to hear from you all. Perhaps we’ll pose options (and giveaways!) for upcoming weeks on a regular basis. You can tell me what is of the most interest … I get very energized writing because of your feedback rather than the ideas that pop into my head, out of the ether. And who doesn’t like a chance to get free stuff! Sounds like a win-win to me!

So, faux came in heavy right off but a call to see more about variation started coming up from behind as the evening went on. The end result is … we are going to start with faux this week then look at how to work out variations next week.

Since Iris and Hilla brought to our attention another art form emulated in polymer, why don’t we stick with other craft arts that we can create in polymer? Try to keep in mind as we look at these techniques that the objective is not to find other arts to emualte but to see new directions that polymer can be pushed in your studio. For instance, I thought we’d start with an artist who’s faux lampwork has fascinated me since I stumbled on it a few years back. I love experimenting with liquid polymer and I was fascinated by how high Sharon Solly makes her glass like dots and how well controlled they are.

dotted-3

 

Sharon may have an bit of an advantage over the rest of us as she actually does lampwork. I am really curious as to how similar the work is. I know I experimented for a while trying to get the dot not to spread. My solution was to either add just a smidge at a time, hitting it with a heat gun between dabs or preheating the base clay so the dot of liquid polymer would start to solidify immediately. The pre-heat worked well on flat items as I could lay the base clay on a hot plate/mug warmer and work on that but the round beads  … I just couldn’t get the same effect that Sharon is getting. But if you can work on building up liquid polymer like this, you could add a bit of the faux lampwork look to many things you couldn’t add glass to in the first place. There are tremendous possibilities for decorative dotting!

If you are in the least bit interested, do look through Sharon’s Flicker pages. This one image is a bare tip of the iceberg … she has a broad body of work showing her on-going experimentation with this process. Actually, Sharon looks to be a major faux experimentator with a large variety of stones and dichroic-like pieces done in polymer.

So go explore some faux! Tomorrow we’ll announce the winner of the Cosmic Ceramic giveway as well. See you then!

The Many Possibilities of Faux Ceramics … & a Cool Giveaway!

I’m still debating on what direction to go this week. I have been sent some wonderful new art from Iris Mishly based on a new series of faux ceramic tutorials she developed with Hilla Bushari. I’ve been thinking about having a faux themed week but then I was intrigued by the variation in types of pieces Iris and Hilla created with this technique–everything from flower beads to beads that look like tiny houses to tea caddies to incense burners to cuff bracelets and on and on–and I thought maybe we should talk about variation and pushing what you do with a particular technique. I still haven’t decided so … tomorrow’s post will be a surprise but it will be determined by you! (Read on about how you can help me decide and put yourself in the running for a free Sample Project!)

So, let’s check out what Iris has for us. She just put these tutorials up just last week. They do have an amazingly realistic ceramic look. These ladies got so creative with her beads too. Look at this strangely beautiful “Moon beads”, both otherworldly and organic in style.

polymer-clay-faux-ceramic-moonrocks5 _640x480_

 

 

And if you like making home decor, they’ve created quite a few unique items like these tea caddies–they’re adorable and so much more appealing than stacking those boxes of tea on the counter.

polymer-clay-faux-ceramic-timefortea-3 _640x480_

Here is what Iris says about her new tutorials:

“The tutorials are covering 10 different beads designs and 8 final projects, each is examining the different faces of faux ceramic – textures, surface treatments etc. In general, the projects are demonstrating the various ways we came up with to imitate ceramic glazed products; some are dimensional, some flat, some created with chalks, pastels, gilders paste and some with alcohol inks. Each project is accompanied by a separate video and screen shots in a PDF file. The videos are for the ones who want to see the complete process from start to finish, and the pdf is for those in a hurry and want to go briefly over the photos.”

So if you’ve been looking for something new to explore, these look to be all too much fun. And Iris’ tutorials are beautifully created with lots of tips and carefully thought out steps. You can see the full array of possibilities (not that there is a limit to what you can do here!) on the PolyPedia Online website.  Iris and Hilla are also giving away sample beads to the kit purchasers who buy the best set. 

WIN A FREE SAMPLE PROJECT!

Iris and Hilla have been kind enough to offer a free *sample* project from the complete “Cosmic Ceramic” tutorials to one lucky reader commenting on this post. Just tell me whether we should cover faux techniques or the subject of technique variation the rest of this week … or post a comment about whatever this post brings to mind! The winner will be announced in Thursday’s post!

Last Chance and a Little Fun

A little bit of business to chat about today but we’ll get back to our standard programming tomorrow.

The Summer issue is at the printers and rolling down the machines as I write this. It’s so exciting … can’t wait to get my copies here! But the first copies get sent out to the readers directly from the printer. I send them the list of readers to mail tomorrow so if you haven’t pre-ordered your copy or need to subscribe or renew your print subscription, today is the day to do so! Just go here to do so: http://www.thepolymerarts.com/Subscribe.html

This issue is packed!! Tons of fun to be had between learning about collaborative art work, being inspired by combining other materials with polymer, ideas for adhering polymer to all kinds of  objects, exploring inclusions, ideas for great photo backgrounds, making wire findings for polymer and so much eye candy and inspiration you can take straight to the studio. Don’t miss it!

Because this issue was so packed, we couldn’t include everything sent to us or that I wanted to show you. Like this garden pendant from Nikolina Otrzan …

6776160924_f6935bb607

 

 

Nikolina has such a unique, fun and quirky style. Her pieces just make you smile. She is a featured gallery artist in this upcoming issue and I hope will continue to share with us in the future. She is also a CraftArtEdu instructor with one her coolest techniques–her Colori pieces–up as a tutorial now. Take a look at what she has to offer and keep your eye out as she has more coming soon!

A Touch of Color

May 11, 2013

I wanted to take a moment as we wind up this colorful week, to point out a simple fact about color–how you use color is just as important as what colors you choose. I feel this needs to be emphasized because with all the colorful work we’ve been looking at this week you might think you need to get more colorful or bolder. But the use of color is about how it affects the impact of your piece so you can use a lot or just a little  and still have a highly impactful piece.

I think Betsy Baker fully realizes the value of color and balancing it for impact. Here is a series of pendants with barely any color visible, yet the color that is there is very dynamic visually because it is not competing with any other colors and is starkly contrasted against white.

White grid trio

 

These pendants are both calm but bold at the same time. It’s very powerful, really. So, you see it isn’t about how colorful your piece is but what you are trying to convey and how you can use color to help you make a statement or design a piece to come off just the way you intend.

Outside Inspiration: Drunk on Color

May 10, 2013

Today’s outside inspiration is quite different, not just for this blog but as a type of art work. What you see below is bourbon. No, that is not some indecipherable typo … the colors and visual texture is the result of photographing liquor under a microscope. How crazy and cool is that? These images are from BevShot, a company that photographs and sells images of favorite alcoholic beverages.

Screen-shot-2011-02-25-at-6.40.44-PM

 

The liquor is “crystallized on a slide and shot under a polarized light microscope. As the light refracts through the beverage crystals, the resulting photos have naturally magnificent colors and composition.”

Yes, they do!

So what can we take away from this? Well, color inspiration for one, of course. Here’s nature again, being more stunning than we might imagine. You could create a dozen color palettes from the combinations here. The yellow, orange and magenta in the lower right, the yellow, magenta, purple in blue in the striations towards the top, the green, yellow and watermelon red in the center left portion … what great palettes!

There are two other things you can take from this art. One, look at the very microscopic world for some of the most amazing colors, textures and forms. Search for microscopic images and see what grabs you.

The other thing … look at this website. They have taken their beautiful imagery and transferred it onto all kinds of objects, not just wall art. As craft artists, most of us are used to creating functional items for sale but we tend to make the same kind of products. Why not stop and consider whether what you do with your jewelry can be applied to vases, boxes, swtichplates or other objects? Or what do you do with covered objects that you might be able to use to create wall art or jewelry. If you need to inject some fresh items into your line, looking at different forms using the same or adapted techniques might be just the thing.

Speaking of covered objects and wall art … the latest issue which includes extensive articles on both these subjects plus much more is off to the printer and will be getting mailed out directly from there end of next week. If you haven’t already subscribed, renewed or pre-ordered the new issue so you can get it in the first mailed batch, you can do so here at www.thepolymerarts.com/Subscribe.html  The cut off date to get your orders in for the first print mailing will be end of day this Monday. The release date of the digital form of the Spring 2013 issue and the first day you might be able to expect the print issue to arrive at your door is May 22nd. So, soon. Very soon!

I found BevShot through Lindly Huanani’s website. Of course she’d have found this wonderful source of color.

Guest Post: Radiate!

May 9, 2013

My dear and darling friends Tracy Holmes and Dan Cormier are helping out a tired and worn out publisher this week by guest posting for me today. I wanted to write up something about their color projects for our color theme this week but Tracy graciously took the writing upon herself and Dan put together the fun image of the cubed color project they conducted for Synergy 3 (they are such incredible idea people!) So go ahead  and ‘radiate’ with them …

When I invited artists to participate in a project that combined the diversity of polymer clay with the almost uncountable possible configurations of a Rubik’s Cube, I gave them a few guidelines. While each artist was welcome and encouraged to showcase their own skillset and sing in their own creative voice, this was, primarily, a project about colour. “Please,” I suggested, “Keep each of your six sides within a clearly identifiable Pentaradial Palette.”

what?

Through this project, and through my workshop and seminars at the recent Synergy3 Conference in Atlanta in March, I introduced a new approach to colour that I’ve being playing around with; a new way to explore and understand it, in theory and practice. In my world, a ‘Pentaradial Palette’ is a group of colours that radiate from a single, central place to create a cohesive collection of related hues. Basically, it’s taking a standard ‘Colour Wheel’ colour and, rather than chasing it around in circles as one of six, moving it into the middle to become a single ‘Hub’ for the other five. Whether you start with RYB or CMY (that’s another discussion), for this discussion, can we all agree that Green is a Secondary colour? Good. So, here’s what my PC3 artists got as their ‘Pentaradial Palette’ grid guide for the Green side:

Pentaradial Palette

With the right recipe (concept + clay + courage), mixing custom colours is easier than you think. But having said that, if you’re not quite ready to go DIY with the CMY, there are plenty of prêt à porter spokes already on the pre-packaged polymer clay colour wheel. Starting as recommended, with the purest and simplest of Hubs, here’s what nine of my PC3 artists did with their Greens:

cubed

As a polymer clay artist and teacher, I think it’s best to work towards work that features a personal palette, rather than one that relies on colors that are right out of the package. And, as my color-courageous Cubists discovered, it’s amazing how quickly adding just a little of ‘this’ to a package of ‘that’ will shift the starting hue away from something everyone recognizes, to something that is so much more ‘palettably personal.’

So, whether you’re going Green, mellowing Yellow, seeing Red, feeling Blue, shifting Cyan or mixin’ it up with Magenta, stop spinning your wheels. Grab a color, start there … and radiate!

Follow Tracy & Dan’s color adventure on their Facebook page at: www.facebook.com/TheCuttingEdgePolymerClay

 

Naturally Formed Color Palettes

May 8, 2013

I have always found that one of the most fascinating and astonishing places to study color and find inspiration for combinations is in natural elements. Not just in the outdoors, mind you, but all things naturally formed. This may not seem like news but have you ever stopped and studied the actual combinations of color not just inherent in any single thing but even the combinations that occur naturally. Have you ever seen a rock including the tag-a-long bits like lichen, moss, rust, etc. that had clashing colors? Did you ever look at the shade of green in the leaves surrounding a colorful flower and think “That color green so doesn’t go with those flowers”?

Maybe I’m just a little odd but for years I would go on hikes or to zoos and actually try to find poor natural color combinations. I have seen a few that weren’t to my taste but by all I know of color theory, they always work. How does Mother Nature do that?

Drawing inspiration from natural color combinations is just another way to bring fresh ideas into your studio but that is also the trick … keeping it fresh. The thing is, you don’t have to be literal. You may love the autumn colors of the changing trees but that doesn’t mean you can only use those colors with leaf and tree motifs. Take the colors where they’ve never been before.

Peacock colors are extremely popular but so many of the applications are replicating the feathers as well. No need for that. Do something completely feather free. Here Chris Kapono goes wild with the peacock colors but with a very unfeathery pebble-like appearance in her Little Peacock Book Box.

little_peacock_book_box_by_mandarinmoon-d5t3p1e

 

Take nature’s challenge and find some natural color combinations that strike you and see what you come up with in your studio. Keep your camera at the ready … you never know when nature will bring you the perfect palette.

The Arrangement of Color

May 7, 2013

The arrangement of your color schemes can be as important as the color choices themselves. Here is an example of using two kinds of color schemes but arranging them for the most impact.

In this brilliantly colored necklace by Kristie Foss, the color scheme moves from the analogous colors purple and red to complementary colors as the deep red bleeds into its opposing color on the color wheel, a bright green. The contrast is not just in the the choice of base color but the red is also darker and leaning towards purple while the green is lighter and leaning towards purple’s opposite, yellow.

limeswirl

 

This same dramatic impact can be accomplished even when the complementary colors are not right next to each other in the piece. In this flower brooch of Kristie’s she has purple changing to a dark then light blue and then we’re hit by a contrasting yellow which takes over the center of the flow. With the broadest swathes of pure color being the yellow in the center and the purple covering the edges, the impact from the complementary colors still works and it doesn’t hurt that blue and yellow are tertiary (colors a third of the color wheel away from each other) which adds touch more impact as well.

flowerpin-jpg

 

Krisite really does love her color and creates lovely combinations. You can check out more of her work and yummy colors on her blog here.

Color Studies

May 6, 2013

I thought this week, we’d just look at color. Because who here doesn’t like that? For most of us it’s such a primary part of working with polymer. How can we resist with all those gorgeous colorful blocks enticing us to create something that honors our fascination with them?

And then we condition and roll, cut and punch, form and wrestle, combine and rearrange and eventually we have this finished piece that, somehow, doesn’t quite reflect what we were after. When it comes to color, even for those of us who can often combine them intuitively, study and practice is what will bring about success in taking the designs from inside our head onto our studio tables.

There are a number of ways to study color and that, I promise, are not at all dull times. What you learn can be immediately turned into beautiful creations. These pendants by Austria’s Carina are studies in complementary and tertiary colors. Now, tell me you would have not enjoyed creating something like these?

7098467015_fb6ede5448_c

 

Your own personal exploration and study of color can begin (or continue) through a number of options we have available. For polymer specific color studies, there is nothing that comes close to the depth of Lindly Huanani and Maggie Maggio’s book Polymer Clay Color Inspirations. Honestly, if there was one book I’d expect to see on every serious polymer artist’s shelf, it’s this book. It doesn’t matter where you are in your journey as a polymer artist, you will learn something new and maybe even game changing for you.

If you want a quick brush up on terms and why these concepts are important (since we’ll be talking about them all week, it might be good to refamiliarize yourself with them) you can do so on websites like this one: http://www.colormatters.com/color-and-design/basic-color-theory

I’ll also share one of my favorite color pages on all the web … this is a kind of shortcut to figuring out color combinations and it’s also a little addictive. You click on a color on the color wheel and then you can run through a range of possible color combination types. I get lost in the possibilities: http://colorschemedesigner.com/

So go play with color today, online at least if not in the studio. Getting lost in color sounds like a great way to start a week.

Persistence of Ideas (And 50% OFF+ Damage Sale!)

June 20, 2021
Posted in ,

First, my apologies for being absent the last few weekends. I kept thinking I’d be able to post something, but my days have been exhausting.

The roller coaster of the last month, not to mention the last year and a half, has really brought into perspective the concept of self-care. Balancing responsibilities with care for yourself as well as for others can be a tricky thing but, it’s not unlike art—if the composition can’t achieve some sort of balance, not much else is going to work.

So, I’ve been hashing out some ideas that will allow me to keep chatting with you as well as do what I need to do for my family and with my creative projects. I am hoping that will all be settled this coming week and we can have a little chat about that next weekend.

 

Persistent Ideas

In the meantime, let me share a thought by a fellow polymer artist, Adam Thomas Rees. He posted this intriguing piece, seen above, on Facebook last month, saying:

This was my first hybrid sculpture mixing metal and clay. I’d had this idea floating around in my head for about 10 years before I finally went for it. If you have an idea you’ve been sitting on, it might be time to go for it!

I have to agree. The first of the two novels I’m working on was also started a decade ago, maybe more. It can take some time to get around to it but, if an idea sticks with you, I think it’s a sign that you should really try it out!

What have you always thought about doing but haven’t tried yet? It can be very invigorating to take on something brand new and challenging.


Annual Damage Sale!

Grab Imperfect Publications for as little as $3.98 or Perfects & Supplies for 30% off

So, it’s that time! I’m cleaning out the mailing room and collecting all the publications with a dinged corner or a little shelf wear and am putting all these perfectly readable publications up for purchase at 50%-60% OFF the list price.

  • Print Magazines: 3.98 each
  • Print books: $5-$12 each.

Half of the imperfect issues will sell out day one if tradition holds so don’t wait!
This only happens once every year or so and once they are sold, the great deals are — whoosh –outta here!

Go here to grab up these steals before they’re gone.

Need Something Else?

Get new PRINT items and design tools for 30% off! So, if you can’t round out your collection of TMA publications with an imperfect copy, you can do so with an amazing deal on a shiny new one!

PROMO CODE FOR 30% OFF : damsale21

Promo code works for any PRINT publications or Design Tools NOT already on sale on the whole of the website. 

 

30% off sale end June 30, 2021. Not good with other discounts, coupons, or on shipping. Damage sale ends when stock is gone, which can be pretty darn quick so don’t wait!

Read More

A Second Collective Look

April 25, 2021
Posted in ,

This week, I need to beg your forgiveness as I am recycling a post from a couple years ago. There’s been a small avalanche of family emergencies — nothing life-threatening — and I need to head out to Colorado and Kansas for a couple of weeks. I’ve been unable to put something together for the blog with all the distractions, but I’ve been thinking about this idea of collections again. It seems a lot of us were doing it a bit of exploring last year, which tends to result in lots of unused bits and pieces. So, this might be a useful reminder of things you can do with those bits and bobs.

Do you have a bin or box of pieces and parts of your handiwork yet unfinished but which you are too in love with toss? If you regularly create, I can’t imagine that you don’t. But what exactly do we do with these pieces? Do we hold on to them, hoping that they will be just the thing needed someday or do we toss them?

It can be quite the dilemma, one that even Marie Kondo can’t easily help with because, hey, these do spark joy for us! We see value in them, in that they represent our creativity and what we can accomplish. But do such little jewels of our work belong in a bin where we don’t get to admire them?

I’ve been thinking about this question for a while and came up with a few solutions of my own. If you have a copy of Polymer Journeys 2019, you can see, in the very last entry, my contribution, which is a display case of small exploratory items for which I had no particular use in mind when created them. I created them without thinking, “This is going to be a pendant,” or “This is going to be a set of earrings,” or “This is going to decorate a vessel.” I just made them to see what the material would do, most of which I liked, and they all represented a little exploratory learning experience.

I had already been tying bits onto ribbons and hanging them off the edge of my studio corkboard as little festive decorations. That doesn’t work for pieces that only had one viewing angle though as they would twist around on the ribbons, so I was still in search of other options.

Then I was out talking to the butterflies in my backyard (Yeah, I talk to the creatures in my yard,) and remembering how I used to catch and collect them in shadow boxes as a kid. It just randomly struck me that my little creative bits were like butterflies. They are lovelies I caught in a moment of exploratory creativity and in that small frame of time, they became a kind of unexpected friend, going through that creative time with me. I didn’t want to toss my little friends, even though I had no end-use for them. You don’t do that to friends! You hold on to them and support each other, right?

Does that sound silly? Maybe it is, but it was revealing to me to realize that I kept certain pieces not because they were so beautiful or well done, but because I felt connected to them. So, why not collect them and put them out like a collection of butterflies or a collage of photos? What you see here is what I started making. My husband and I would find shadow boxes at garage sales and thrift stores for cheap, and I’d arrange my bits in them like compositional jigsaw puzzles. I’ve made half a dozen of these so far.

By the way, I use a hot melt glue gun to tack the pieces onto a bit of mat board cut to fit the box. The nice thing about the hot melt glue is that if you do every want to take a piece out of the collection, you warm the back of the mat board with heat gun or hair dryer for a couple seconds and pop them right off. So, your “friends” can come out and play in another piece or a new collection if you like!

As I shared in the previous version of this blog in 2019, people have also used old collectibles display boxes to show off small sculptural pieces or heavy pieces of fabric to pin or hook jewelry pieces as a means of display as well. Look around at how you are other people put together collectibles for ideas about how you might display your polymer bits.

So, do I have your little wheels turning? These should give you ideas not just for what to do with your extra bits, but many of these could be a jumping-off point for creating your own unique show displays and photo setups.

Do you have a cool and unique way to display your extra bits or jewelry? Send me links to images if you do. Put it in the comments below, or if you’re reading this by email, click the header for this post to get to it online to leave a comment.

 


 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…


 

Read More

Hard Won Joy

April 18, 2021
Posted in ,

Libby Mills’ Mod Flowers are her latest challenges. Take a look at her Instagram page and all that she’s been doing over the last couple of years, including process and studio pics.

How adverse are you to hard work and challenges?

Recognizing your ability to face the challenges and incredible effort that goes into creating original artwork can be a necessary, if somewhat painful, bit of self-assessment. Most of us find ourselves on one or the other extremes—either we give up too soon, not doing the work or finding shortcuts that don’t help us grow, or we don’t give up even when the process becomes pointless or detrimental.

Are you one or the other, or are you somewhere in the middle? Or does it depend on the type of work or challenge?

The Easy Way

Trying to find an easy way around hard work and difficult challenges is probably a bit more common. If we’re all being honest, there’s few of us who have never used a tutorial or ideas from artwork we’ve seen to develop our own pieces. That’s okay. I’m not saying that it’s bad or wrong—taking inspiration from other people’s design is one way we learn. However, if you don’t get past that stage, you are missing out on some of the most joyful work you’ll ever experience.

Using other people’s instructions or ideas allows you to create something without putting your creative self or your ego at too much risk. However, it’s taking chances and doing the hard work that makes the successes so exceptionally sweet. By going out on a limb and creating purely from your own inspiration can result in one of the most joyful feelings I think a human being can have. Seriously. There is nothing like hard earned success in your creative work to put you on Cloud 9.

Now why do we feel that way about our own artwork? Well, for one, the work is born of our ideas, experiences, and loves. But more so, it’s because of the struggles we went through either to learn the skills that allowed us to make the art and/or the hard work and time we put into its creation. When it’s done, your talent, your spirit, and your perseverance become a concrete thing that you can revel in and share.

In one of my writer’s group, a friend of mine asked why every story has to have conflict. The answer is that story IS conflict. Can you imagine watching a movie where the hero of the story had everything happen just the way they wanted it to? If Harry Potter just flicked his wand and make Voldemort go away, or Hamlet didn’t care that his father was killed, why would we watch those shows? Do you gossip about the good things that happen to people or the difficulties people are having?

Now, think about how satisfying it is when Harry vanquishes his nemesis and Hamlet finally avenges his father. Those moments are so immensely satisfying to us because of what we went through with the characters to get there. And that is true of anything we want to attain as well. The more conflict and struggle we face, the more satisfying it is when we accomplish or gain what we are after.

There’s actually science behind this. Researchers have studied everything from job positions to winning the lottery and they have found that when people are simply given something without having to work for it, not only does any elation from the acquisition die quickly but people are far less fulfilled and, sometimes, even become depressed. However, when people struggle to get promoted or have wealth because of years of hard work, they are not only happier, but they are also more motivated to keep at it than those that were simply given those things.

So, when you’re in the studio, don’t be frustrated or shy away from challenges. When you find them, think, “This is my chance to achieve something wonderful and fulfilling.” If you presently lean on the ideas of others, challenge yourself to create from your own designs as much as possible if not completely. Take risks. Push yourself just past the point of being comfortable. Do the hard work and see if you don’t find it more than worthwhile.

 

The Other End of the Spectrum

Now, if you’re one of those that doesn’t give up when you should, or you don’t give yourself the time off when you should, learn to take more breaks both physically and from the work you’re struggling with. It often helps to put a difficult piece away for a little while. Pull it out a few days or a few weeks later and you can see whether it is still worth working on. If it is, you’ll probably see a solution you didn’t see before.

Just don’t be afraid to set aside a piece that is going nowhere. Don’t feel you have to try finishing something because you put a lot of time into it. None of your time spent is wasted. Everything you do helps you learn and hone your skills.

Me, I’m of this sort. A dog with a bone, as they say. I look at every challenge as a battle to be won, and I don’t know the meaning of surrender. It’s rather ridiculous sometimes. I also don’t stop working when I should either, which is why I keep hurting myself.

 

Scaling Back on the Blog for a Bit

For those of you that were not with me for the Great Elbow Drama of 2019, I developed an advanced form of tendinitis in my right arm and can no longer type with it for any length of time. Well, now I have an overused left arm after too much research for my novel and too much gardening. *Sigh*

So, this post, and probably the next few, will be primarily chatting rather than deep dives into design concepts as I’m limited to using my speech to text software while my arm (hopefully) heals. Searching for a selection of great art images to go with what I’m writing about requires too much mousing I’m afraid. I hope you’ll stick with me though. I’ll aim for a mix of “Life As an Artist” articles like this one and design refresh posts that need only one image for the time being.

In the meantime, for those of you who can, get to the studio, give yourselves some reasonable challenges, and enjoy the fruits of your labors.

 


 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…


 

Read More

Compositional Bones

November 8, 2020
Posted in , ,

This glass vase by Robert Coby is broken up into a rough but simple composition of thirds.

Composition is really an intriguing design aspect. It is how everything comes together because it is the structure of it. It’s the bones upon which all your elements and principles are placed. It’s a functional concept and an all-encompassing one.

The structure of our compositions use a number of anchoring concepts, all rooted in design principles. We could learn the principles first but since they are less concrete than the elements you have been learning, I think an overview of the possible compositional structures will allow you to immediately see how the principles of design we’ll get into later can play out in a composition. But in order to talk composition I need to at least touch upon a few of the principles.

Last week, I started your compositional knowledge with a brief discussion of focal points. As we dig into new compositional concepts this week, remember that focal points will be either an element we are strongly drawn to, will have tremendous contrast, will be a place where elements converge, a place where an element is isolated, or will simply strike us as unusual. In other words, they stand out more than anything else when taking in the whole piece.

So, that was a first introduction to that principle. Here are a couple more.

 

Hierarchy

In your piece there will be elements that stand out more than others and ones that are barely noticed. The one that stands out the most, as you are sure to surmise, should be your focal point or points but after those, all the other pieces will likely be vying for attention in a visual hierarchy. That order creates a perceived perception of each element’s importance.

Rebecca Thickbroom’s necklace elements almost always take up separate spaces with little or no overlapping. It makes them feel presented, like they are part of a story. She is also fond of including negative space beween parts in her designs which, with jewelry, make the body or clothes of the wearer part of the overall landscape of the piece. There is also a definite hierarchy of elements. Where does your eye goes first? Where does it go after that? And after that? Do you see how this hierarchy moves your view around the piece so it feels full and cohesive?

You can determine what elements are more important than others by giving them more space, making them bigger, having them high contrast, setting them where line or shapes converge, giving them a lot of energy through color, marks, lines, etc.

Hierarchy, knowing which items are most important, is needed for most standard compositional arrangements as their placement can be successfully arranged based on them.

 

Space

When we talk about space, we talk about positive and negative space. Positive space is usually the action, the focal point, or an area of primary interest. The negative space is usually a background or an area where the viewer can rest from analyzing the more active areas. It’s also all the empty space around sculptural object.

Yes, these principles can get kind of complex that’s why I’m going to take these things one at a time after you get this overview.

 

Easy Peasy Composition- The Rule of Thirds

The Rule of Thirds provides an easy but very pleasing way to lay out your elements. It is also pretty dynamic while easily remaining balanced. Let me explain.

Imagine a tic-tac-toe grid laid over the primary view of your work, like it is in the opening image of this post. If you look at your work in terms of this 9 box grid, you end up with several choice positions for focal points and breaking up the space.

For instance, the points near where the horizontal and vertical lines intersect are great places to set a focal point as well as secondary focal points.

The grid can also be used to break up the space. If you want two background textures, instead of just splitting the “canvas” of your piece in half, you can put the stronger texture on just one third, covering 3 squares of your grid. The second texture would have more space but if not as visual strong as the other, that extra space would balance against the visual draw of the stronger texture. Again, that gives you balance.

 

Classic Composition – The Golden Ratio

Like the Rule of Thirds, the Golden Ratio is a kind of grid but this time, it is based on the ratio of the body and other natural occurrences—it’s a matter of proportions.

A Golden Ratio grid for composition is made up of Fibonacci squares which are a visual representation of a mathematical sequence of the same name. If you skip the math, you can just create the grid starting with any sized square then start adding squares that are as wide as the widest side of the shape you have at that step. The first time, it’s just the same size square but after that, it keeps doubling in width.

The Fibonacci sequence and this Golden Ratio are the basis of the natural world’s primary compositional method. The most often referenced example is the nautilus shell. The interior pattern is a Golden Spiral. Its shape will curve from corner to corner in every square in the GR grid. That’s because the widening of its spiral is based on the Fibonacci sequence. Cool, right?

My Ice plant brooch fits nicely in a Golden Ratio grid. I didn’t do this consciously but having studied the Golden Ratio quite a bit, it is very intuitive for me. It won’t take long for it to be intuitive for you either once you’ve worked with it a bit and start to recognize and feel the graceful balance of its compositions.

You can find these proportions (approximately 1.68 to 1) everywhere—in the proportion of your limbs (your upper arm to the rest of your arm, your whole arm to your body, etc.), the arrangement of flower petals, the way tree branches grow and split, even in the double helix of DNA. In other words, it’s everywhere and so we find order and comfort in it, even if we don’t recognize it consciously.

In art, focal points that land on that first tiny square turns out to be one of the most pleasing compositions to the eye. The grid can be oriented in any direction, flipped upside down or whatever. If the focal point lands there, you are pretty, well, golden!

 

Keep in mind that these compositional grids and standards I’m introducing are not used precisely. They are loose guides.

 

 

So, now you have two orderly, well balanced compositional arrangements you can use as go-to ideas for composition. These work best on groupings of elements like you might have on a brooch or pendant, single contained elements that will be part of something larger like the focal bead/element of a necklace, the primary view of decorative objects, and, of course, for wall art. They are also fantastic compositional arrangements for those photos you need of your art!

Try these out next time you are laying out a design, sketching, or snapping pics of your pieces. Scroll down for apps and gadgets to help you find these compositions in your designs.

 

Changing the Composition of Our World

I was so going to just let this post slide without any commentary on the news here in the US but I just want to add whatever unifying voice I can out there but I ended up writing a whole article about it! Since this is so not about art, I am not posting this here, but if you are at all interested in our understanding each other, perhaps my words here can be a helpful start or an additional push.  Go to my Facebook page here.

In other news, I do have Grayscale Value Finders back in stock for those of you who missed out on them last time. If you pop over to the Design Tool Supplies page, you might find another gadget, a compositional tool/ViewCatcher, available if it hasn’t sold out to the Art Boxer Club members yet.

Keep in mind that Art Boxer Members get a much more in depth article, exercises, and other articles on living an artistic life in the weekly mini-mag so if you like these posts, support this blog and your artistic endeavors by joining up here.

Read More

Beating Burnout

October 18, 2020
Posted in ,

Corvid sculpture from the rich imagination of Ellen Jewett. I don’t know where she draws her creative energy from, but I’d take a sip or two if she bottled it!

Do you ever get artists block? I’m not talking about times of procrastination or being afraid to start something but literally not been able think of anything to do. Does your brain ever just feel empty?

Well, this weekend, mine was, which was weird. I’m not usually at a loss for words, especially when it comes to blogging or writing articles. I usually feel like I can write about art and design nonstop and never run out of ideas. But, this weekend, I hit a bit of a wall.

What is that all about? Honestly, I think it’s about burnout and not just from my usual mad pace. I think many of us are running into burnout this year.

Burnout and blocks are often related in their causes. We all have an infinite number of ideas inside our heads all growing from our countless experiences, ever-growing knowledge, and ever present desires. So, I believe that it’s not that we don’t have ideas sometimes but rather that we are missing the keys to access them.

Without Resources

Although so many of us supposedly have all this extra time and flexibility this wacky year, we don’t always have the energy needed to navigate the constant changes, the stress, the worry, and, probably more than anything, the uncertainty while still juggling our family, jobs, and creative aspirations. Some days it’s just too much. Our well of energy goes dry.

I’m hearing this from a lot of artists. Some are wondering if they are burned out on their medium or their studio space or their creative time in general. Others are lacking motivation because there aren’t shows and fairs to give them those all-important deadlines. Still others, having lost major avenues of income with both in-person teaching and live shows on hiatus, are questioning the fragility of their chosen path.

What it comes down to is that the usual motivations that push us to create are missing. We don’t even have social engagements for which to create new pieces of jewelry for ourselves to wear or guild meetings to encourage us to complete work so we have something new to share. Many of our usual energizing motivators just simply aren’t there.

Signs of the Times

It has been noted throughout history that when there are traumatic and life-threatening circumstances within a society, such as war, famine, or major natural disasters, the people first focus on survival, initially neglecting most other pursuits. However, one of the very the first things that come back into society, once people begin to feel safe and secure, are creative pursuits. Perhaps we don’t all feel quite safe and secure yet, not feeling settled enough to bury ourselves and creative work but as the world starts to right itself, the creative urge will return. Take heart from that.

The other things very particular to this pandemic that may be making it hard to create are that we aren’t having as many novel experiences and are certainly deprived of a normal level of social stimulation. Both these things provide us with inspiration and energy to be creatively productive but they are rare commodities right now.

In other words, while the world and all the bad news is slowly but surely draining us of our day-to-day energy, our sources for renewed energy are spare to nonexistent. It’s really no wonder that so many people are feeling uninspired or burned out right now.

Filling Your Well

So, the first thing I want to say, to myself as well as you, is that it’s okay. Burnout is normal. Our creative path, and life in general, is not a smooth and even highway but more of a roller coaster. This will happen sometimes, especially in times like now.

The other thing I’d say is, rather than worry about any lack of productivity or trying to force it, do what you can to recharge your creative battery. Get out and go places and do things that you don’t normally do. Obviously, stay safe and follow all recommendations in your area, but go take a hike in a nearby forest or walk through an unfamiliar part of town or go photo hunting (a kind of self-structured scavenger hunt but you are gathering photos rather than things). Just come up with things that you can do safely but that are brand-new and interesting to you.

Getting out and doing new things will create new pathways in your brain which will, in turn, energize it and keep your mind fit and flexible. As you get older, new and novel experiences become more and more important so never lose your adventurous spirit. Those same mechanisms that help keep your brain young also keep your creativity flowing, as shown by a number of recent studies. In fact, at least one study suggests that creative thinking is boosted most after weird or even traumatic experiences. If that’s true, we should all be insanely creative when this period in world history is over! There’s another reason to take heart I suppose.

Besides novel experiences, also be sure you are getting some kind of social time in. Sure, it might have to be a zoom call but, if it can be done safely, a socially distanced backyard or front yard gathering (while we still have some weather we can sit outside in) with a handful of creative friends or family can do so much to boost your spirits and energy level.

I myself am going to heed my own advice. Next weekend we are going to take out the camper van conversion I’ve been working on and do a little van camping. That’s the other thing. Sometimes burnout or creative blocks just simply need space and time. We can try to barrel through it – and I often do just that – but sometimes we really just need to kick back and relax and let the mind “marinate” on life and our present experiences. Combine some downtime with some new experiences and, if you can swing it, some socially distanced social time, and you are sure to come back with renewed energy and inspiration.

Read More

Why Size Matters

October 11, 2020
Posted in , ,

Fanni Sandor creates exquisitely small and biologically accurate creatures in polymer clay and mixed mediums. Her choice to go small is born of a fascination with minature art and we, likewise, are fascinated by the tiny masterpieces. See more on her Instagram page.

What size art do you work in? Have you even ever thought about that? Do you work small, big, or a nice moderate middle size?

I think many of us have a limited size range that we feel comfortable working in and rarely, if ever, venture outside that range. There’s nothing wrong with that but it does beg the question, do you think about what the appropriate size is when you create something?

As you might be guessing, if you’ve been reading my blog or design articles for any length of time, I’m about to point out that making the decision about the size of your work can help to fulfill your intention.

(Do you ever think, “If she says something about intention one more time…!” Well, I do hope it’s not annoying. It’s just that important!)

Size in art simply refers to how big or small something is. It is used in a variety of ways to emphasize, organize, assist in functionality, and symbolize the intention of the artist. A lot of the size choices made have to do with relativity – something can only be called small if something else is big and vice versa.

In design, this is actually a principal known as proportion and scale. Proportion is about the relative size between two or more objects or elements when they are grouped together or juxtaposed. Scale refers to how big or small something is compared to the general understanding of how a thing usually is or should be. For instance, we expect a chair to be sized for human beings to sit in and a teapot big enough to hold several cups of tea. Anything significantly larger or smaller than these expectations would be a change in scale.

Scale represents an interesting concept in that it makes note that we do have expectations about how big or small thing should be. That may sound like we have some kind of undue constraints placed upon those of us who create, but actually, scale gives us an opportunity to step outside those expectations and make a point.

As mentioned above, size can be used emphasize things. Making something bigger than expected usually draws attention, so if you created a beaded necklace with beads as big as golf balls, those are definitely beads that are bigger than normally expected.

The same concept of emphasis works with proportions. Let’s say that you only made one of those beads as big as a golf ball in the previously mentioned beaded necklace and the rest of the beads were of a more reasonable size. In that case, you would be drawing attention to the big bead as a focal point. Size allows you to direct the viewer’s eye and their impression of the work.

It may seem that bigger items will be more impressive or have a bigger impact but, honestly, very small artistic creations can be just as fascinating, sometimes more so due to the skill needed to create beauty in such a small space. I think you can see that in the opening image of this post. Small art requires the viewer to come close to it to really see the details, creating an intimacy between the viewer and the piece.

So, have you ever thought about these considerations for size when creating your work? Don’t worry if you haven’t. It’s not that uncommon for size to be determined in some arbitrary or organic manner. And I’m not saying that doing it that way is wrong, but you could be missing out on an opportunity to better express your intention if size was a conscious decision.

 

A Sizable Story

One of my high corset collars with stitched copper and polymer embellishments.

When I was a working artist, I often made decisions about size based on what I thought people would want. It wasn’t a particularly conscious choice, more of an aim not to make pieces too big. I was not trying to make statement jewelry, but rather something that could be comfortably worn all day, or so that was my train of thought.

I can’t say what got me to start thinking about size, but at some point, I started to ask myself why I was afraid to go big. So, I started to push myself, making big collar pieces that would sit as high as the jawline and come down to the collarbone. Some were a little crazy, some were so uncomfortable, but I still found so much joy in making all of them.

I found something freeing in pushing myself beyond what I thought my market would like. And, as it turned out, my market liked them big too. I sold every one that I put up for sale. They never came home with me after a show. So, what I discovered was that the sizes I had been working in were completely self-imposed without any supportable basis for my choices other than my own fear of not being able to make a sale.

Once I realized why I had been working in those smaller sizes, I was able to start making decisions based on what the work needed to be instead of what I thought the market might want. For example, if I was going to make an ornate piece with the intention that the wearer feel like a queen, I would probably decide that it should be big and bold, not small and delicate or demurely moderate, to better emphasize the feeling of nobility I wanted it to embody.

 

Georg Dinkel works large when he is trying to make a point about our reverence for technology, like with this iPhone docking station titled IReliquary.

What’s Your Size?

So why do you work in the sizes that you do?

Is it purely functionality or rooted in the idea of what people would expect the size to be?

Is it limited by the tools or forms you have on hand, or by the capability of the materials being used?

Do you let the size come about organically or unconsciously or do you make a conscious decision about size based on the impact or response you would like the viewer to have?

I truly don’t believe that there’s really a wrong way to determine the size of your work but, like any design element, you are only truly a master of it if you are aware of its possibilities and make conscious choices.

So maybe this week, think about the size of your artwork in terms of your intention. Look at pieces that you’ve made in the past and ask yourself how the look and message, if there was one, would have changed if the piece had been smaller or larger. And in the next few things that you design, ask yourself what size piece would best serve the artwork before letting your tools or expectations of scale determine it for you.

 

Goodies are About Gone

Support this blog and your creative endeavors … join the club!

If you didn’t see the newsletter yesterday, I shared the stock I have left for a few special items that were first offered to Art Boxer Club Members, but a couple things are sold out or nearly so already. These are limited items that I will periodically offer publicly, without the discounts or freebies club members get, when there is extra stock, so if you can’t join us in the club, keep your eye out for my newsletters and sign up here if you aren’t on that list for my next offering.

Getting first dibs as well as discounts and freebies is one of the advantages of being part of the Art Boxer clubs, along with the weekly mini-magazine pick me up you get in your email. (The Art Boxer Success club that includes coaching is also unavailable at this time as spots are full up but I do have a waiting list going – just write to me if interested.)

These limited supplies are available on this page if you are still interested.

 

All Quiet on this Western Front

I have little to report on the home front. I did go in in for a small surgery Thursday only to find out I’m going have to go back in six weeks or so from now to have it completed. Nothing is straightforward and simple this year, is it? So, just trying to make myself take it easy this weekend although I am just a horrible patient in that regard.

Next weekend, assuming nothing else weird happens, my better half and I are going to slip away for the weekend to test the camper van conversion we’ve been slowly working on. I do plan to put something for you together before I go so you should still be able to visit with me next Sunday.

In the meantime, all your hopes and plans, big or small, all go off as intended this week!

Read More

Preciousness

October 4, 2020
Posted in , ,

Kathleen Nowak Tucci going big with not-so-precious intertubes and other disposables.

What would you say if I suggested that you create a piece and then, after you are done, remove your favorite bit? Yes, I realize the request might be physically impossible without causing complete destruction but, alternately, what if I asked you to destroy something you just spent your valuable time and effort creating?

I know you might be wondering if this is some kind of dreadful crafty torture. Why in the world would anyone ask that of you and what would be the point?

Well, this was done to me and a couple dozen other classmates back in college… twice.

The first time was in a creative writing class. We brought in a piece we had been working on all week then were asked to highlight all of our favorite lines. We passed the highlighted sheets to the person next to us and then the professor asked that we scratch out all the highlighted lines in the story we had in hand.

Of course, all us sensitive little budding Hemingways and Dickinsons sat there stunned and appalled as our pieces were read aloud without the sparkling gems that we thought would certainly reveal our genius. Strangely enough, all but one of the pieces still made sense and sometimes, the author even admitted it sounded a bit better. The point was, the professor said, that we tend to fall in love with phrases or sentences and will leave them in even when they don’t serve the piece.

The point was that without our wittiest word choices we could, in theory, make better editing decisions. In art, is it possible that we could make better design decisions if we were willing to set aside the glitzy accents we love so much or not fall back on our favorite tried-and-true textures all the time?

The second time I had a professor crush my little angsty ego was in a ceramics class after we each had done a small series of slab vessels. The professor asked us to pick up our favorite piece, bring it to the center of the room, and hold it up. We were then asked if we would be willing to drop it from a height into the trash bin that sat there. Of course, no one did it at first and he just stood there waiting until a couple brave souls let their pieces go. Then the pressure was on for the rest of us to follow. Even though I wasn’t particularly attached to the piece I had in hand, it was still so hard to drop it but I did. I seem to recall that a handful of students did refuse.

Sounds like a real jerk of a professor to ask such a thing, right? Well, I have to say that, at first, that’s what I thought but then he started to talk about preciousness. His conversation had something to do with becoming too attached to particular pieces. He wanted us to put value on our process, our growth, and learning, not on impressing him or our classmates. I think he was also looking for a way to wake us up as he had been getting frustrated with our attention span during the lecture portion of the class. Well, he sure did that.

I remember thinking about that lesson some years later, when I was better able to take it in. It made me realize that each successful piece I made was really just a step in a journey more so than an end goal unto itself. That changed the way I looked at my work. And it somehow made me braver.

I still did, and do, have favorite pieces that I cherish and will never sell, but seeing the work as steps and creation as a process rather than an investment of time in an end goal has allowed me to work a bit more freely. I have a ton of pieces that remain unfinished, and although it’s disappointing every time to come to a point where you realize it’s not going to succeed how you wanted it to, I don’t have any qualms about setting it aside. I don’t see the work as wasted because I know I’ve gained a little bit more experience and a little better understanding of the process. I’ve let go of the preciousness I used to have about everything I made.

Preciousness arises not only in our valuing our time to such an extent that we will not give up on a piece even when it’s no longer salvageable, or ignoring possible design solutions because they would eliminate our favorite part, but it also happens with the material itself.

Liz Hall creates in polymer and (a lot of) precious metal clay.

Quite a few years ago, I was itching try precious metal clay but it really wasn’t in my budget. Then I found some at a really great price and bought it. But you know what? I never even opened the packages. I just couldn’t get myself to work with this very expensive material for fear I would ruin it. But, of course, it’s rather wasted now that I’ve had it so long that is not workable. Pretty stupid, right? But we can be like that, putting value on the material and not on the process and the joy that we get from learning and creating.

Preciousness is tied into fear and failure in a lot of ways. Our idea of what we think we can do or what we think we should be able to do may be so lofty or so dear and treasured that we are afraid to try, fearing that we will make a mistake and ruin our efforts or that it will not come out as we imagine it. So, we do nothing, which is the same as ruining it, just really early on.

We may also get to a point in a piece where we love it so much that we are afraid to take the next step, a step that might spoil it, and so we set it aside, with all the best intentions to take that next step at a future time but all we’ve done is deny, or even end, the work’s potential.

I thought we’d start out this month on the concept of preciousness because it felt like a good segue into discussing October’s design theme – size.

Preciousness is one of those factors that comes into play when we decide on the size or scope of the work we will take on. Our sense of preciousness can make us hesitate to do something large or particularly complex, as we may fear that we will invest a lot of effort, time, and materials into something we are not assured will be successful.

Julie Eake’s cane mosaic portrait of actress Sophie Turner was, like most of her cane mosaic portraits, a huge undertaking. But aren’t we glad she takes those risks?

But, again, have we not already failed by not attempting it in the first place?

If we looked at everything we create as precious, all the time and effort that we put into it as well as the finished work, we would have to play it rather safe in the studio. However, art is not about playing it safe.

Art is largely about the risks you take.

If you’re not taking risks, then are you actually creating art? There’s nothing wrong in creating just for that sense of accomplishment or the high of that Zen like flow we fall into when the work is familiar and comfortable. It is more than valid to have the process of making things with your hands be the primary purpose in what you do. However, it’s the hours of exploration, the failures, the false starts, our vulnerability, the deep digging, like miners looking for gold, that makes the work that we inevitably uncover truly art.

The risks we are willing to take is the thing that is truly precious.

 

So, keep the concept of preciousness in your mind as we talk about size this month. Of course, we’ll talk about variation and contrast in size since that is what is primarily being referred to when speaking of it as a design element, but there are other things about size that we can take into consideration as we create, move forward, and grow as creatives.

 

Speaking of considerations…this week, I am going to have to take my health into consideration, so although I do plan on preparing a blog for next weekend, if it ends up being short or skipped it’s because I’m having a little surgery towards the end of the week. It’s just my esophagus and I should recover in all of two days. I have to fit in all my usual physical therapy before then though, along with all the regular weekly business tasks so it will be a full week.

Don’t worry though – all you club members will get your Midweek Mini-Mag as usual including a goodies giveaway so you can look forward to that if you signed up for one of the clubs.

 

If you haven’t signed up for one of the clubs yet but really appreciate the information inspiration you find in this blog, help support this project by subscribing! Get your weekly mini-mag, exclusive discounts, giveaways, and special offers along with your support. With everything you’ll get, you can also think of the club as a unique and special way to acknowledge the preciousness that is your creative self!

Read More

Relationships in Texture

September 27, 2020
Posted in ,

Evgeniya Aleksandrova has a rough texture over everything here but varies the depth and pattern of the texture as well as the color.

Since we talked about tactile texture last week, it would seem logical that I would talk about visual texture this week.

But I’m not! I don’t want to be too predictable!

No, that’s not why. Actually, it’s that most of what needs to be said about visual texture has to do with the usual recommendation of choosing characteristics that fulfill your intention. If you read my blog, even sporadically, you’ve heard this before.

As long as you understand that visual texture is a purely visual variation on or within a surface (such as marbling, mokume, ikat, or any application of an ink, powder, dye or paint medium), then, as described in the post from the week before last, you can choose visual textures simply by coming up with adjectives to describe your intention and do likewise with possible visual textures and match them up based on similar adjectives. That is the core of the approach for working with visual textures.

So, that being established, I’d like to, instead, talk about another thing you’re also familiar with if you have been reading the blog for the past couple months but which we have yet to specifically associate with texture.

Creating a Relationship

Last month I talked about choosing color palettes in terms of contrast and similarities. But guess what? Combining different types of textures also plays by the same basic rules of contrasts and similarities.

I love how Joy Kruze echoes the spots in the stone with the spots of metal in the texture created in the spaces between the metal lines of her unusual bezel

Most work you create or look at probably has more than one texture. It could be a combination of smooth and rough textures or a variety of different rough textures or variations of smooth ones. You may often combine tactile texture and visual texture, as well. What these combinations all achieve is variation. Variation in texture is pretty instinctual for most creatives, as is a desire for variation in color.

The variation between textures can be heavily contrasted but, like color, it helps to have at least one similar characteristic so there is some relationship between them. With texture, you can actually use other design elements to create that relationship such as using the same or related color or a similar shape for the texture’ s space. Once you have that similarity, everything else can be contrasted.

But what about using similarities between the characteristics of the textures? For instance, you could create only rough textures but vary how that roughness is created. Or all your textures could be stippled holes but you vary the shape or size of those holes.

 

Just as you need similarities, you’re probably going to want variation, too, not only to create contrast, but also to create shapes, layers, and compositional direction (which we will get to later this year).

The Need for Variation

Variation, as always, adds some level of interest, energy, and complexity to your work and you can adjust how much you add of these by adjusting the variation between textures (or any design elements) – from subtle to bold or somewhere in between.

Let’s say you want to make a piece with a strong graphic look. You’ve already chosen hard edged graphic shapes and bold colors. What about the texture? You might choose a slick, glossy surface as a primary texture. Now, what other textures can be used to vary the surface but have it still related to a glossy one?

Hélène Jeanclaude creates glossy surfaces on all parts of this necklace but between mica shift and mokume, and the contrast of colors, she creates variation and lots of energy.

If you want to go subtle, you could stick with variations on smooth textures such as a matte or satin finish. Alternately, you can choose to rough up the surface but in a very orderly way similar to the orderliness of your graphic shapes. This can be done with a series of dense, parallel lines, or a dense but orderly mark.

As long as the marking of the surface is the only thing that changes, then all raised portions of the comparatively rougher texture will be glossy. That will give you your similar characteristic – the gloss of the smooth surface and the occasional gloss of the rough surface.

This is not to say that you can’t have textures that are completely and utterly different. The extreme contrast could be, in and of itself, a relationship. That difference will cause tension or discordance, but that could be exactly what you want.

Here are just some of the characteristics in texture that could create similarity or contrast:

  • Tactile or visual
  • Smooth or rough
  • The quality of the finished surface (glossy, satin, matte, or chalky)
  • Type of mark, technique, or tool used to create the tactile or visual texture
  • Organic versus graphic styles
  • Size (how much space each texture takes up)
  • Direction (if the texture visually flows or moves from one part of the piece to the other)
  • Shape of the space it is applied to

A visual texture shows variation in density and repetition of the dots that make up this surface. Melanie Ferguson actaully etched the surface and then polished it with cold was so she has smooth tactile but rough visual texture on her surfaces.

As you can see, other design elements can become quite intertwined with texture. Marks, lines, size, direction, and shape all can play a role in the similarity or contrast of areas of texture in your piece. It really doesn’t take much for us to see a relationship between textures. If it’s there, we’ll see or sense it and the design will feel more cohesive for it being there.

Since that texture relationship can be, and often is, developed through other design elements we work with, this is not always something you need to be wholly conscious of. But, if something in your work is not looking right, check for the relationship between your textures as well as your colors and other elements.

And, if next time you are looking at your work and feel like it needs some contrast in its tactile or visual texture, just look at the dominant texture that you have and, using it as a starting point, choose possible other textures or design options that will create at least one similar characteristic, still provide contrast at the level that makes sense for you piece, and has characteristics that recall the theme of your work.

 

Last Days for Club Discounted Forever Pricing

3 days left to join the Devotee or Success clubs at the FOREVER discount price so you can get first dibs on limited stock offers, discounts, and goodie box giveaways, all while getting a mid-week mini-mag of brief articles to keep your creative energy and ideas going. And right now you can also get in on it with a 2 week free trial! .

So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club 0r buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.

 

Visual Contrast … Out of Doors!

Packing up to take the camper van conversion for a test drive up the coast, just one night. That’s been my little side project that I’ve been getting myself lost in for an hour or so most days. It’s not completely done but good enough for one night out for my better half and me. I need some contrast between life inside this lovely home of ours and the outside and distant world! So, I am off. I hope you all are looking for new and novel things to add a bit of excitment and contrast in your lives as well!

 

 

Read More

Tactile Allure

September 20, 2020
Posted in , ,

Melanie West’s satiny smooth finish has a heavanly tactile texture even though many people might think of her pieces as being textured because they’re so smooth. Yet smooth is actually one of world’s most loved textures.

How often do you touch art?

No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?

Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.

Choosing Tactile

The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.

The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.

For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?

You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.

Felt may have textural limitations but the final texture is still a choice. Olga Demyanova contrast a tight, even texture with the rippling and rougher orange edging and accents in this intriquing handbag.

There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.

 

Work that Begs to Be Touched

There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.

 

Smooth Surfaces

Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.

Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.

So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.

 

Klavdija Kurent gives the wearer of her jewelry much to explore with their fingertips.

Variation

Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.

However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.

 

The Best of Both – Smooth and Varied

I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.

Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.

The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!

The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.

 

The Tactile Balancing Act

The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want.  Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.

If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.

 

Should I Call Them Mini-Mags?

The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring.  So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.

But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.

So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.

 

No Fires Here

We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)

 

I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.

Read More
If you love these posts ...