DIY Alcohol Ink
November 24, 2013
Technique tutorials, Tips and Tricks
So after a week of talking about alcohol inks, have you found yourself diving in and trying a few ideas you saw? And now, are there any alcohol ink colors you wish you had, but haven’t been able to find or don’t want to buy a pack of 3 or 9 just to get them? Do you find them expensive or hard to find? Well, we do have an option–making our own!
The things you need to make your own alcohol inks are a permanent dye color source and rubbing alcohol. There are two primary color sources available to pretty much everyone–home fabric dyes such as Rit, or permanent markers like Sharpies. I haven’t tried either, but I have heard that the ones made with Sharpies are very, well, pungent. That chemical marker smell will fill the air. Not sure that’s a good thing, but if you have lot of permanent markers you don’t really use, it would be a way to give them a purpose. However, from the research I’ve done, it seems that the Sharpie colors are more vibrant than those made with the fabric dyes when using them on polymer clay. Which was a little surprising. Not surprising is that the colors are more vibrant on paper than on polymer. But as I haven’t tried it (yet!) myself, I can only offer the online instructions I found that seemed most useful and let you decide.
This video uses the permanent marker method:
Here is a page on creating alcohol inks with markers if you aren’t into watching videos.
As for alcohol inks with fabric dyes, here is the best of them that I found. It’s a short video by Cindy Lietz of Polymer Clay Tutor, so it’s definitely geared towards polymer clay use.
You may also find some instruction about making alcohol ink with food coloring or Kool-aid, but keep in mind that the color needs to adhere to polymer. Most food dyes cling to proteins but will not stain–certainly not in any permanent fashion–synthetic materials like plastics. So you need permanent dyes that will become permanent on synthetics and non-porous surfaces.
So as far as I know, permanent markers and fabric dyes are your best bet for easy to find alcohol colorants. And they’re cheap. That is always a plus!
Get Caning!
July 13, 2013
Technique tutorials, Tips and Tricks
So my request earlier this week to have people send in caning links for this week’s theme resulted in more questions from people just getting into it. Since there were so many queries, I thought I ought to take a moment to address the basic question these emails had in common … how does one get started or work on moving on from the basics? (For those of you who are quite advanced, this list and links might be helpful as a list for your website [I imagine you get these questions too!] or to recommend before a caning class to get your students to work on the basics.)
So here’s what I would recommend if you are starting out caning …
1. Take a class. So much of what goes into caning, especially reducing, is rather difficult to explain without hands on demonstrations. Check with local guilds, bead stores, the IPCA website, and The Polymer Arts resource list to see what is going on near you. A keyword search using your state/country, “polymer” and “classes” or “workshops” might bring up a few things as well.
2. Get a book. A book with a lot of detail and variety of projects to try your hand at could get you far. Some of the better ones I know of are Sue Heaser’s Polymer Clay Jewellery for Beginners: Book 1 – Millefiori Canes,
Donna Kato’s The Art of Polymer Clay Millefiori Techniques and Patricia Kimle’s Exploring Canework in Polymer Clay: Color, Pattern, Surface Design.
3. Search the internet for caning tutorials. This will give you a broad variety of techniques and approaches to explore. If you’re a self-starter and really motivated, this is usually the least expensive option as many of the beginning cane tutorials are free. Once you get more advanced, you may want to invest in some of the tutorials sold on Etsy and CraftArtEdu.
One of your fellow readers, Meg Newberg, sent along this link of free cane tutorials which she also regularly posts on her very active Facebook page, Polymer Clay Workshop. Here is a post photo from her Facebook page a few months back that I thought was just a beautiful collection of kaleidoscope canes with nicely chosen color schemes that she was working on.
As I am admittedly not the caning expert and so many of you are, please do add your thoughts in the comment section if you have further ideas for those new to caning. Many thanks!
Polymer Connections in Toggle Clasps
May 27, 2013
Inspirational Art, Technique tutorials
This week I thought we’d do look at polymer fasteners – the connections and findings made from or dependent on polymer for their construction. One of the reasons I want to look into this is because of a new section in The Polymer Arts magazine called “Polymer Jeweler’s Workbench”. In this regular section we’ll be exploring techniques, ideas, and designs specific to jewelry created in polymer.
In the recently released Summer issue of The Polymer Arts, we feature combining wire findings with polymer; but one can easily create findings from polymer itself. Here is a straightforward example of polymer toggle clasp findings by Tina Holden.
The great thing about making polymer clasps is, of course, that you can make them to match the design of the piece using the same colors, textures, and motifs so the clasp becomes a integral part of the necklace or bracelet design, not just an add-on.
Tina is a very inventive and creative polymer artist. She shares many of her wonderful techniques through her tutorials which you can find on her Etsy and Artfire shops including one for the clasps you see here.
The Faux Enamel Options
May 16, 2013
Inspirational Art
First, because people are waiting to hear, we’d like to announce that the winner of the Sample Cosmic Ceramic project is … Karen Donald! Congrats!
Thank you all for chiming in on the faux versus variation question and taking part in the giveaway. I’m going to line up more giveaways so we can do this regularly. Write me with any suggestions for things you’d like me to try to get for these contests. Or if you’re a retailer of any kind and have something you’d like to giveaway from your shop, let me know. Write me directly at sbray@thepolymerarts.com
So … it would be remiss of me this week not to bring up what may be the faux techniques most widely experimented with when it comes to emulating other art forms–enamel. The common approach usually involves liquid polymer and alcohol inks and/or mica powders. The challenge tends to be in creating a base that has borders and/or channels to hold in and control the faux enamel. And there are a lot of different approaches for this.
At the beginning of the month, we visited Eugena’s artwork … she uses wire as her loose borders. It’s a gorgeous effect. It does take precision and patience, well worth the work, but isn’t for everyone. My favorite is the wax impression technique (See the Winter 2011 issue of The Polymer Arts magazine for the tutorial on this) because carving the wax to create the negative design has endless possibilities and there is nothing I’ve found that allows finer detail. But if you want to try something more straight forward, take a look at these “molds” cut into erasers and clay by Madrid’s Fabi.
She briefly explains the process on her Flickr page (although I think it was sent through a translator as it has some ‘interesting’ terms.) The advantage of erasers is the crispness of the lines although curves have to be more difficult to cut. I think her “gouging” tools must be engraving tools. You can get an inexpensive set at art and craft stores if you want to get into this. They can be used to easily cut into cured clay for other effects as well.
One of the things I wonder is whether we have really pushed faux enamel enough. I think there are possibilities, especially with the translucent clays, that we haven’t really seen. I’ve been playing with an idea myself but it’s not quite ready for prime time. However, tomorrow I am going to show you an artist that I think will knock your socks off, not just because it’s gorgeous work but because of the possibilities it shows us as polymer artists. She worked in real enamel and metal but the way it’s done, it actually reminds me of polymer and could be done in a way that would really push what we do with faux enamel right now. Intrigued? Well, tune in tomorrow …
The Many Possibilities of Faux Ceramics … & a Cool Giveaway!
May 14, 2013
Inspirational Art, Technique tutorials
I’m still debating on what direction to go this week. I have been sent some wonderful new art from Iris Mishly based on a new series of faux ceramic tutorials she developed with Hilla Bushari. I’ve been thinking about having a faux themed week but then I was intrigued by the variation in types of pieces Iris and Hilla created with this technique–everything from flower beads to beads that look like tiny houses to tea caddies to incense burners to cuff bracelets and on and on–and I thought maybe we should talk about variation and pushing what you do with a particular technique. I still haven’t decided so … tomorrow’s post will be a surprise but it will be determined by you! (Read on about how you can help me decide and put yourself in the running for a free Sample Project!)
So, let’s check out what Iris has for us. She just put these tutorials up just last week. They do have an amazingly realistic ceramic look. These ladies got so creative with her beads too. Look at this strangely beautiful “Moon beads”, both otherworldly and organic in style.
And if you like making home decor, they’ve created quite a few unique items like these tea caddies–they’re adorable and so much more appealing than stacking those boxes of tea on the counter.
Here is what Iris says about her new tutorials:
“The tutorials are covering 10 different beads designs and 8 final projects, each is examining the different faces of faux ceramic – textures, surface treatments etc. In general, the projects are demonstrating the various ways we came up with to imitate ceramic glazed products; some are dimensional, some flat, some created with chalks, pastels, gilders paste and some with alcohol inks. Each project is accompanied by a separate video and screen shots in a PDF file. The videos are for the ones who want to see the complete process from start to finish, and the pdf is for those in a hurry and want to go briefly over the photos.”
So if you’ve been looking for something new to explore, these look to be all too much fun. And Iris’ tutorials are beautifully created with lots of tips and carefully thought out steps. You can see the full array of possibilities (not that there is a limit to what you can do here!) on the PolyPedia Online website. Iris and Hilla are also giving away sample beads to the kit purchasers who buy the best set.
WIN A FREE SAMPLE PROJECT!
Iris and Hilla have been kind enough to offer a free *sample* project from the complete “Cosmic Ceramic” tutorials to one lucky reader commenting on this post. Just tell me whether we should cover faux techniques or the subject of technique variation the rest of this week … or post a comment about whatever this post brings to mind! The winner will be announced in Thursday’s post!
Last Chance and a Little Fun
May 13, 2013
Inspirational Art, The Polymer Arts magazine news
A little bit of business to chat about today but we’ll get back to our standard programming tomorrow.
The Summer issue is at the printers and rolling down the machines as I write this. It’s so exciting … can’t wait to get my copies here! But the first copies get sent out to the readers directly from the printer. I send them the list of readers to mail tomorrow so if you haven’t pre-ordered your copy or need to subscribe or renew your print subscription, today is the day to do so! Just go here to do so: http://www.thepolymerarts.com/Subscribe.html
This issue is packed!! Tons of fun to be had between learning about collaborative art work, being inspired by combining other materials with polymer, ideas for adhering polymer to all kinds of objects, exploring inclusions, ideas for great photo backgrounds, making wire findings for polymer and so much eye candy and inspiration you can take straight to the studio. Don’t miss it!
Because this issue was so packed, we couldn’t include everything sent to us or that I wanted to show you. Like this garden pendant from Nikolina Otrzan …
Nikolina has such a unique, fun and quirky style. Her pieces just make you smile. She is a featured gallery artist in this upcoming issue and I hope will continue to share with us in the future. She is also a CraftArtEdu instructor with one her coolest techniques–her Colori pieces–up as a tutorial now. Take a look at what she has to offer and keep your eye out as she has more coming soon!
Opportunity to Grow
May 3, 2013
Inspirational Art, Polymer community news
If you have been enjoying the conversation about expanding your artistic voice, you may want to hop on over to Voila! this weekend. As of this Sunday, there is a new class you can join–Ways To Wow … and all you have to do is show up on the site Sunday!
Here’s the deal: Voila! is creating an opportunity for you to spend the next 6 months planning, designing and making a piece to achieve significant creative growth. At the end of the course, you will have a landmark piece in your body of work that exemplifies your creativity. You will also have learned a method that you can use for your future big projects.
Christine Dumont is a force for artistic growth in our community and regularly has classes like this running on Voila!. Look at what Angela Garrod did during the last class, How to Become a Better Artist.
Angela has thoroughly explored this hollow pendant form with a variety of applications. Intense exploration into a technique, form or approach is a great way to explore your artistic voice. You find yourself drawn back to certain aspects of your experiments which gives you a direction to push yourself. This kind of in-depth exploration is what you can expect if you join in on one of Christine’s Voila! classes.
Here are highlights from the class description:
The course will require at least two hours of your time per week. The studio sessions will of course require as much time as it takes to complete the piece. This course is free and available to all but only Voila! members will have access to the forums to discuss the course material and post images in the gallery.
New course material will be posted on the Homepage every Sunday starting May 5th. You don’t have anything to do except wait for May 5th when Christine will be posting course material for the week.
Cool, huh? Head on over to Voila! if you aren’t familiar with the site and then we’ll see you back there on Sunday! http://www.voila.eu.com/
Cloisonne Like No Other
May 1, 2013
Inspirational Art
Faux Cloisonne is not a new technique at all in polymer but there are at least a dozen ways to do it. Even then, within each approach there are very definite choices that become the signature of the artists who have chosen to work extensively with it. Below is a piece by a fairly well-known and, I think easily recognized artist (or maybe I’ve just been admiring this person’s work for ages!). Eugena Topina sells tutorials for this technique as well as having provided the basics in an issue of Polymer Cafe many years ago but as beautiful as this technique is, you don’t really see its likeness anywhere.
I’ve been sitting here trying to figure out how to say what I want to say next in a sensitive manner but I’m not sure there is a way. I brought up Eugena’s work because I wanted to address the worry that some artists have of being copied. My first thought on this subject is always about why one would worry about being copied. If it directly impacts your ability to gain income from your art, that is somewhat understandable but the fact is, you will put your art out there to be seen at some point and if it is well received, others will try their hand at it. There’s no way around that. My second thought is, if you have developed your own unique voice as an artist, there is no way anyone will be able to copy you so that what they do will be mistaken for yours. The third thought … do what you do so well, no one else can copy you, not in any direct manner.
Eugena’s approach to cloisonne is very precise, her colors are bold and bright and her finish looks flawless. She also tends towards flora and fauna in her imagery. This combination of approach, skill and imagery marks her work and makes her pieces easily recognizable. Even with all her information out there on how to do what she does, you don’t see work like hers by other artists. I think she’s simply done it so well, no one can touch her. So if you have a technique, design approach or form that you want to really push as your own, perfect it. Invest time in developing it to its full potential so when you do put it out there, you are setting a very high bar for those who want to emulate what you do. This will give you a solid position and the kind of recognition that does give you income making opportunities in being able to teach it as well as sell it.
Your other option for keeping people from copying you … develop your original, very individual artistic voice. We’ll touch on ideas about how to do that in tomorrow’s post along with a stunning example to draw from.
The other thing about people copying your work … if they do, it’s not only a compliment but an opportunity. Christi Friesen lives off the fact that so many people try and emulate her work.
While Waiting for your Pardo Translucent Clay …
April 24, 2013
Inspirational Art
It’s funny how many comments and emails I got on Monday when I mentioned that I had untouched blocks of Pardo translucent clay in my studio. There is such a demand and yet so little available. I have had email conversations with a contact at Viva Decor but I never got a straight answer as to why its in such short supply or when we might expect to see it more readily available. So what’s a frustrated artist to do? As far as actually getting your hands on some, your best bet in the US seems to be getting on PolyClayPlay.com’s waiting list. (Is it any easier getting it in Europe by chance?)
In the meantime, I say go play with our other options. Pardo may be the clearest (so we’ve heard) but only in the clays themselves. The absolute clearest polymer you can work with is Fimo Decorating Gel. Although it can also be tough to locate in some places, it’s not impossible to get a hold of. (See our post last year regarding Fimo Gel and a false rumor; I listed places to find it.) You may not consider Fimo Gel to be a primary polymer to create forms with but with a little outside-the-box thinking, you’ll find you certainly can work with it as something other than an addition to the surface of clay.
Kathrin Neumaier has been playing extensively with both Pardo Translucent Art Clay and Fimo Gel, sometimes interchangeably. Here is a piece in Pardo Tranlucent clay (and what a fun piece!):
And here are basically the same forms but created in Fimo Gel:
So, yes, you can form pieces from liquid polymer and get a translucene as good if not better than with the elusive Pardo. And just think … there’s no conditioning!
The easiest way I found to work with liquid polymer as a form is to start out making sheets of cured lpc. You simply drizzle then lightly brush out the liquid polymer on a clean and very smooth, flat surface and bake it like that. A piece of tempered glass or polished sheet metal is an ideal surface. If you don’t have either, you can use a sheet of window glass (you can buy small panes at hardware stores or take the glass out of a picture frame) but you should put untempered glass into a cold oven and wait until it’s completely cooled before taking it out–rapid temperature changes can cause the glass to crack. (And tape up the raw glass edges with masking tape–let’s not cut ourselves!)
If the liquid polymer comes out of the oven still a little milky in spots wave a heat gun over it, keeping the heat a couple inches (50mm) away until it goes clear. (If you baked it on untempered glass, take it off the glass first.) Then you can cut whatever forms you want from that sheet. You can even add more liquid polymer to build it up or add color.
I would say about half the work I did in the first couple years I worked with polymer was created with lpc forms made this way and not just with Fimo Gel. After practicing for a bit, I could get any lpc to got completely clear. It just takes a little patience but its wonderful fun.
Kathrin has made all kinds of forms from liquid polymer including hollow beads and one piece collar necklaces. If you have the translucent bug, you need to take some time to browse through her Flickr pages for some inspiring ideas on what you might try while waiting for your Pardo.
Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.
I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.
Let’s look at some examples of how holes are used as integral parts of design in jewelry.
Hole-y Jewelry
First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.
Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?
Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.
Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.
Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.
Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.
Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.
Punching Your Own Holes
Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.
- Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
- If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
- For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
- If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
- Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.
Need Supplies or Inspiration?
Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.
Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!
On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.
Read More
Are you familiar with something known as the flow state? This is that space you get in where you are lost in your own little world because you are so wrapped up in what you are doing. It happens quite commonly when people are working on creative projects and it’s a really good thing for you, both because it dissipates stress and because it increases your level of “feel-good” chemicals like serotonin and dopamine. It’s also defined as an “optimal state of consciousness where we feel our best and perform our best.” Now, who wouldn’t want that?
I bring this up because I want to talk about mosaics. I think a lot of people look at all those tiny pieces and think, “That looks like a ton of work!” And, yeah, there might be a lot of steps to putting a mosaic together, but the technique is also one that really gets you deep into a flow state. It can be kind of like doodling but with little pieces.
It would not be a hard thing to start on. Most of us have access to tons of tiny pieces, either through leftover canes, unused polymer sheets, or failed projects we haven’t had the heart to toss out. Just slice up those canes, cut up those sheets, and/or start chopping up those cured elements and you have all you need to start creating mosaics. Of course, you can make pieces specifically for mosaics from fresh clay, too!
Mosaics have been on my mind these last couple weeks because, while working on the latest book, Polymer Journeys 2019, it became quite apparent that one of the bigger trends making a splash right now is polymer mosaics and so I thought we ought to take a closer look at this not so new but definitely interesting and flexible technique. (By the way, today is the last day to get the Pre-order Sale pricing on Polymer Journeys 2019! Go to the website to get it at 30% off the cover!)
Mind you, being the insanely creative and exploratory artisans and crafters that they are, polymer enthusiasts aren’t just slapping together any old standard expectation of a mosaic. They are mixing mediums, trying out every shape in the book, using three-dimensional forms, and generally just pushing the boundaries of what the mosaic technique is. Gotta love polymer crafters!
So, let’s take a look at what some people are doing as of late and we’ll end with suggestions for getting into the mosaic flow yourself.
Different Kinds of Bits & Pieces
One of the folks who, at least initially, takes a classic approach to the art form of mosaics but certainly adds her own flavor to it, is Christi Friesen. She cuts out squares of polymer, lays a base to adhere them to and then arranges the pieces in pleasing and energetic patterns. But of course, Christi can’t leave well enough alone — she has to add bling and embellishments of all kinds! She’s been mixing in glass, wire, charms, beads, and probably a bunch of other things I will never be able to identify, to create her whimsical tiles, vessels and jewelry. Can’t you just sense the depth of the flow state she must have been in creating this beautiful maelstrom?
You could say that Claire Fairweather is classically inspired too, but her work has a twist to it. That twist is a commitment to circles used to create these wonderful images of graduated color and varied texture. Using round elements instead of squares and straight-sided shapes that join neatly together, leaves more open space but it’s one that has a fairly regular rhythm that flows in and out of the carefully placed circles. This gives the imagery more orderliness and a softer look as you can see in the many sides of her mosaic globe below. (Be sure to jump over to her blog to get the rundown on what each side is showing.)
Keep in mind that a mosaic piece does not have to be all mosaic. Large swaths can be made up of other types of polymer elements such as textured, silkscreen, impressed, or hand tooled layers or forms. A lot of Susan Crocenzi’s work, especially earlier in this decade, consist of entire halves of her pieces being a kind of polymer landscape, surrounded by glass mosaics or a mix of mosaic mediums. Here is just one example below but you can find more on her website too.
For all of you mad caners out there, here is an example of how beautifully energetic a piece can be just by arranging thick cane slices on a simple form. This bib necklace is a yet-to-be-hung creation by Ivy Niles, who makes some of the most impressive canes. You can see how much more impressive they are when working together in this off-center mandala type pattern.
If you really like the idea of doing mosaics don’t relegate your sources of inspiration to the work of polymer artist’s, as unique as they may be. Take a look at what glass and tile mosaic artists are doing these days as well (just type “mosaic art” into your favorite browser or an image-centric site, like Pinterest or Instagram) if for no other reason than there is some amazing and gorgeous work out there to enjoy. Here is a gorgeous piece by Francis Green in what seems to be a rare piece of wall art. This woman will mosaic anything she can get her hands on! She kinda reminds me of some unbridled polymer artist with their canes. Just take a look at her website.
The How-Tos of Mosaics
So, are you itching to try some mosaics now? Here are a few places you could start:
- If you want to start with something classic, even, and orderly, check out this straight-forward mosaic tile tutorial by Korrina Robinson on her blog.
- Prefer a more open and visually textural approach that is flexible enough to use any type of clay sheets or even canes? Take a look at this mosaic vase by Kathy Koontz on the Sculpey website.
- If you’re ready to really dive in, might I suggest you invest in this great tutorial on micromosaics and faux glass by Pavla Čepelíková. The opening image of this post shows examples of some of the things she’ll teach you to make in this downloadable PDF.
- If you want to use mosaic as a way to diminish your pile of scrap clay and cured bits, take a look at Christi Friesen’s mosaic video tutorial here. You can also have fun creating mosaics Antoni Gaudi style on an unusually formed box with Christi in the Polymer Art Projects – Organic book (go to our website to get your copy!)
- And if that’s not enough, Christi sells mosaic kits on her website where you can also find tons of other embellishments and bobbles to assist in your mosaic flow. Just click here!
- I even have some exciting mosaics for you to look forward to too … We just found out that Staedtler/Fimo is going to sponsor Ann and Karen Mitchell, the Masters of liquid polymer clay, to create a mini mosaic tutorial for the next issue of The Polymer Studio magazine. This is a changeup to Karen’s tiny micromosaic technique published in The Polymer Arts back in the Fall of 2015.
Whew! I got into a flow a bit there myself writing excitedly about all this fun stuff. I hope you’ll give mosaics a try if you have not already, or at least give yourself some time to just get lost in your craft today. It’s good for the brain and the soul and you never know what will come of it later in your creative journey!
Read More
Saturday was a bittersweet day as we released the final issue of The Polymer Arts. It is enjoying a wonderful reception as it is packed full of great ideas, beautiful techniques and lots of food for thought to get those creative wheels spinning.
If you are one of our readers expecting a digital edition but haven’t seen it yet, look in your inbox for a midday email Saturday or check spam/junk mail folders if it’s not there. The print editions headed to the post office on Friday so they should start popping up in mailboxes soon. If you are on the east coast of the United States or overseas, allow up to four weeks for it to arrive.
Here is a collage of some of the first pages of articles if you haven’t seen the issue yet. This issue feels a bit like a transition between what The Polymer Arts has been and what the new magazine, The Polymer Studio, will be. There are a lot of tutorials focused on technique, as always, but with a more accessible range for the novice to the intermediate craftsperson. Rather like The Polymer Studio will be.
I also wrote a couple of short pieces in this issue, talking about the role of publications in our creative lives and how these ideas caused me to make the changes we are making with the magazines. You can read about the development of these magazines in the “Editor’s Worktable.” In this issue’s back page “Muse’s Corner” is my personal story about how circumstances and refocusing on self-care precipitated the decisions to close one magazine and start another.
As always though, we have lots for you to ponder and act on regarding things like your creative vision, the use of color, selling your work, expanding your jewelry forms, and working as an artist in the world of polymer. The fascinating interview with Helen Breil is reason enough to get this issue. She is a very unusual woman who really took a different path. I think you’ll find some surprising details in this and many of the other articles in this issue.
So if you haven’t yet, you can get your own copy of this very special last issue of The Polymer Arts by ordering it online here.
While you do that, I am going to go visit family in Colorado and drive through the mountains in all their changing colors but I’ll drop in here Wednesday, as usual, with a peek at a few things that we weren’t able to fit in this issue of The Polymer Arts.
Read More
This week is going to be a series of announcements but I promise, they will all be very exciting, they will all be polymer, and they will all give you something you can look forward to as we move into fall and winter (or spring and summer if you’re down under.)
First up… I can finally announce and show off the cover of the first in an upcoming series of books, Polymer Art Projects. This series arose from your consistent request for more projects and a desire to support and promote our great artists, so, after many conversations, I came up with this cooperative book project. All contributing artists in the book will be part of a promotion and profit sharing team. That means they are highly motivated to provide you with some truly fantastic material on top of looking forward to sharing their love of polymer art.
For less than a couple of dollars each, you get 16 tutorials that will expand your abilities under the guidance of some of the polymer community’s best instructors. The skill level of these tutorials range from the experienced novice to the intermediate artisan, with tips and ideas for polymer crafters of all levels. The tutorials are very detailed, each showing off a variety of techniques, expert construction, and lists of ideas for variation so you can create your own unique pieces from what you learn.
The first in the series, Polymer Art Projects—Organic, includes tutorials by Donna Greenberg, Christi Friesen, Eva Haskova, Anke Humpert, Debbie Crothers, Kim Cavender, Stephanie Kilgast, Chris Kapono, Stacy Louise Smith, Nevenka Sabo, Adriana Allen, Dani Rapinett, Fabiola Ajates, Rebecca Thickbroom, Klavdija Kurent, and little ol’ me. Projects include a variety of jewelry as well as home decor, all inspired by mother nature.
Check out the cover for a sampling of what you can look forward to. The cover price for the print edition of this book will be $23.95 but for the next month, you can preorder for $16.75 – that’s 30% off the cover price. Or maybe you’d like a digital edition which will list for $15.95 – you can preorder the digital edition for just $11.95. These preorder prices are good through October 10th.
Don’t forget the last issue of The Polymer Arts comes out September 22. Preorder this last historic copy on The Polymer Arts website.
Read More
One more little tease before I go off. This is a brand-new Christi Friesen piece she created just for the new book, Polymer Art Projects—Organics, for which we will have discounted pre-sale opportunities when I get back in a couple of weeks.
Christi has been playing around a lot with mosaics and shares her techniques for creating polymer mosaic pieces and then applying them on variously shaped surfaces. This covered tin box is a textural jungle gym for the fingers. She mixes the busy, hard-edged mosaic pieces with the soft, organic flowing shapes and surface variations. This is all done over a tin box. Her tutorial is wonderfully detailed and allows some room for those people who like to change things up a bit as they go along, making their own unique version. Which, I think, is the end goal of working through tutorials—to learn the skills to make your own unique, self-expressive work. All the tutorials in this book will give you that opportunity if that’s what you want.
I thought it was also apropos to share this particular piece because Christi’s inspiration for this is Gaudi, as in Antoni Gaudí whose work can be found all over Barcelona. And that is exactly where I’m heading to tomorrow! For three days I’m going to take in all the Gaudi and fabulous Spanish food I can manage. So with that, I leave you in the hands of my generous artist friends, starting with Christi guest-blogging on Friday. ¡Hasta luego!
See more of Christi’s mosaics on her website and stay tuned here or get our newsletter, which you can sign up for on our website here, to be one of the first to hear when the new books are ready to order.
Read More
I spent a lot of time looking for differently constructed clocks in polymer and couldn’t find much that really illustrated the point I was hoping to make. What I wanted was to show that a clock does not have to be on a flat surface. It can be made of many parts, attached or not, and fully dimensional. As long as you have something that can house or hide the clock mechanism while holding out the hands, the rest is wide open. You can have the hour markers designated by any form and attach them with sticks or wire or be free floating–whatever suits the piece and your inclination.
These two examples are commercial designs rather than polymer art but I think they give you the basics of this idea of moving beyond the flat clock face. Not only do these kinds of clocks make for really interesting wall pieces, they give you the freedom to use pieces you may already have such as large hollow beads, faux stones, unhung pendants, small figurines, flowers, etc.
As a gift, giving a clock that has separate pieces might be best attached to something that can be hung as one piece, like a backing of Plexiglas or painted plywood. Or include instructions for a template to mark on the wall where each piece goes. There is little to no construction to deal with but you will have to make concessions in the design for how the individual pieces will be hung. Alternately, go for a design where the elements are attached like the flowers you see here.
The sky is the limit with these kinds of designs. For more ideas, try searching “DIY clocks,” which was the keyword set that brought me to these two pieces. I hope these sparks some ideas and I look forward to seeing inventive clock designs this month!
Read More
This week’s theme will start with one of our more notorious creative instigator, Christi Friesen. On my end it started when my better half came back from an orchid show not with any orchids but rather with a 4 foot tall branch covered in air plants and I thought, “That is far too many air plants for that stick. I should save some from their crowded existence and make planters for them! In polymer. Of course.” However, in my world, the time between the germination of an idea and gaining the free time to implement it can be pretty vast. A few days later, I saw this photo pop up on Facebook. Apparently thoughts of air plants are, well, in the air!
Being a simple rolled cone construction with a ton of possibilities for color, texture, and embellishment, these little wall sconces of Christi’s are sure to get creative sparks flying for those of you looking for something new, easy and fun to play around with. There is plenty of room in this kind of project for your style and voice to come through. Work up something of your own like forming bowls, boxes, or tubes instead of cones and design it with your own signature colors and treatments.
Easy and fun are the signature marks of Christi’s classes and books, not to mention her community site, Christi’s Creative Neighborhood where have access to all sorts of tutorials, videos and creative ideas along with a chance to share with other like-minded clayers. Check out Christi’s happenings there, on her website and on her Facebook page.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Read More
One of my personal favorite articles in the new Summer issue is the “Blended Beauty” article on creating dramatic color and light in canes, written by Meg Newberg. I have been trying to get a really good article for our caning enthusiasts but for some reason, it’s been a struggle getting anything submitted beyond specific cane patterns. Which are cool, yes, but not quite in line with the technique driven and skill building objective of The Polymer Arts.
This article, however, is amazing. Meg gives concise and clear instruction on how to create the type of clay blends that give her canes that beautiful inner glow and dramatic color. But these ingenious Skinner type blends are for more than just caners, as you’ll see when you read it.
Meg’s focus on canes has allowed her deep and intense exploration into what can be done with canes. If you want to work on your caning skills or just want to create more interesting and colorful Skinner blends, read the article but also consider signing up for Meg’s monthly tutorial subscription (the mandala cane you see on the bottom here is this month’s tutorial) or buy one of her tutorials posted in her Etsy shop.
Weekly Inspiration Challenge: Let’s recharge this weekend! Sit back with a favorite beverage and take in your latest copy of The Polymer Arts or another magazine or book and let you mind process the art and ideas you find. Keep a sketchbook nearby to record any “ah-ha!” moments and if you feel charged up when done, go to the studio and have some casual play time, exploring what inspired you.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Read More
Journal covers are very much like blank canvases, which means you can do anything you desire on them. Your medium is probably the only thing that will constrict you, but then you aren’t restricted to one medium, are you? Polymer is amazing and will always be my go to material but I wouldn’t ignore other wonderful options, especially since so many other mediums work so well with polymer.
Here is a journal cover that has no polymer on it but most of the materials used are quite familiar to polymer clayers and could be combined with it to create looks inspired by this texture rich cover. Gabrielle Pollacco uses an insanely wide array of paints, inks, powders, sprays, stencils, stamps and a few other things to create this cover. Sometimes, too many materials is like too many ingredients in a recipe … going overboard can really muck things up. But Gabrielle brings it all together here by limiting her palette and sticking with a weathered look as her thematic motif.
She seriously looks like she is having way too much fun in this video tutorial that she recorded of her full process for creating this cover. I now have a new list of products to find and try so if you watch this, you have been warned that it may result in a bit of frenetic online shopping! Also … the music she uses may get stuck in your head and have you bopping about the rest of the day. It’s not a bad thing. Just wanted to give you a head’s up so you are ready to defend yourself with the mute button if bopping is not appropriate at the time.
Weekly Inspiration Challenge: Create a journal cover for your goals and plans book. Try some new materials to really make it interesting. If you’ve not covered a journal or sketchbook before and find covering a pristine new book on your first try to be a bit too much pressure, create on a separate sheet of clay that can be glued to the journal later or, if you like it as is, can be a bit of inspiration to frame. A sheet of raw clay, cured between two tiles to keep it perfectly flat can be a great ‘canvas’ to work on.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Read More