The Allure of the Box & Important News

December 1, 2019

Do you, like many people, find boxes really intriguing? Why do we like boxes? I mean, sure, they are convenient for storing things, hiding things, shipping stuff, and wrapping up gifts. But some of us (myself very much included) can become rather infatuated with them. I know I have a hard time passing a box and not opening it up. Boxes have this mysterious unknown interior that could be holding just about anything that will fit. The possibilities poke at our curiosity.

The things with in a box become automatically precious or necessary. Why put something in a box if it is not valuable or you do not think it will become useful in the future? So, boxes hold valuables of a sort, normally. So why wouldn’t you want to peek in and see what kind of fabulous things are inside?

I bring up boxes because I have a bit of news that has to do with boxes. Say uncle scrolling down to the end of the post to see what my news is, here it is. Then we’ll look at a few polymer boxes to further contemplate

 

The Good, the Bad, and the Exciting

Note: If you are an existing subscriber to The Polymer Studio, you should already have received an email with this information. (If you believe you are an existing subscriber and did not get a subscription status email, check your junk mail folder. You can also check your subscription status on your account page here.)

So, after 4 months of working on my health and arm injury, I have gotten to the point where I have been able to determine, more or less, what I can and can’t do going forward, and since it is apparent that I will continue to be restricted for the foreseeable future, I have made plans accordingly:

The Good:
As of January, I will be resuming work on publications for 2020 and am working on new projects now.

The Bad:
I am shutting down The Polymer Studio magazine for good. I have, however, set-up exciting options for fulfilling subscriptions for existing subscribers, primarily the new Box project you’ll read about below. (More details for subscribers are in the email sent out earlier today.)

The Exciting:
I have 3 exciting projects that Tenth Muse Arts will be offering this coming year–

  • I will be scheduling 2 book publications for 2020, including the second Polymer Arts Projects book (the theme will be Shimmer and Shine) and a book on expanding your creativity yet to be titled.
  • I will be expanding our shop to include hard to get and self-published polymer and mixed media related books to connect the community with more great artists and authors.
  • And… instead of a regularly published magazine we will be offering a monthly Virtual Art Box for polymer and mixed media creatives.

I know, I know … there are a lot of questions those announcements bring up like what is a Virtual Art Box and why am I not publishing the magazine any longer? And I have answers so, read on!

 

What is the Virtual Tenth Muse Art Box?

The Virtual Art Box is a digital package of invaluable articles, lessons, specials, and printable tools all geared to advance your creative self and give you more “a-ha” moments. Like a magazine, we will be providing serendipitous educational and inspirational content but with additional tools and perks that just couldn’t be produced in the pages of a publication.

Each Virtual Art Box will include:

  • Design immersion lessons (weekly)
  • Creativity Cultivation seminars & worksheets (every month)
  • Customizable challenges (every month)
  • Art Nudges (weekly)

… as well a variety of these possible items:

  • Project and technique tutorials
  • Demonstrations
  • Interviews
  • Printable gadgets and aids
  • Retail partner discounts and specials
  • Sneak peaks and Box subscriber only discounts for Tenth Muse Arts publications
  • And whatever other great goodies we think up or you suggest along the way.

The Virtual Art Box will be multimedia to include video and downloadable PDFs and will be sent out monthly. They will be available as a automatically billed monthly and quarterly subscriptions that can be canceled at any time. The first box will be sent off February of 2020. Subscriptions aren’t available quite yet, but we’ll let you know when we have all that technical stuff done so you can! (Existing subscribers will be automatically signed up for the Virtual Art Box or they will have the option to request store credit – details for subscribers will be sent out this coming week.)

 

Why No Magazine?

As many of you know, I halted magazine production in August because of health issues. Although I am not through the full six months recommended for recovery time, it has already become apparent that there is some permanent damage in my arm and there is still a long road ahead for the other health issues I am dealing with. So, something had to be changed.

Being the primary editor and layout designer for the magazine, and facing the reality that I can no longer carry my usual workload, my only option for keeping the magazine going would be to hire more third-party contractors which would result in one or, most likely, all of three things – significantly raising the price of the magazine, jeopardizing the quality of the production and content, and/or not paying the contributing writers and artists. I am not happy with the idea of any of these outcomes and instead I have chosen to discontinue the magazine and work in formats that put less repetitive strain on my arm and should be better able to financially support additional contracted staff as needed.

I am more than a little sad about closing down the magazine. I’ve been publishing periodicals for the polymer community for over eight years and have worked in magazines since high school. However, I’m hoping, with these new ventures, I can continue to inspire, educate, and increase your joy and fulfillment in your creative endeavors through these other exciting avenues.

How Does This Affect This Blog?

So, as you might have noticed, one of the items in the Virtual Art Box is a weekly design lesson. Well, that’s basically what I’ve been doing on the blog this year but, without a magazine to promote on a regular basis, it’s been hard to justify the time that goes into these article length posts beyond the fact that I love doing them. But the mantra for this next year is to work smart.

So, what will happen is that the full-length posts plus other notes and nudges based on the content of the virtual box will be sent to the Virtual Art Box subscribers each weekend. Here, on this publicly accessible blog, I will do an abbreviated version of the subscriber’s weekly design immersion content so I can keep nudging folks to look closer at the design of their creations.

Starting this month, I will be creating those abbreviated posts so I can focus on wrapping up the details of this new project, hire a new assistant, and get a production schedule up for next year for the books. All that with the holidays in the midst of it. Sounds like I’m getting crazy again but I promise to do as the doctor orders. I am really looking forward to being productive again!

 

Now What about Those Boxes?

With polymer, you can make boxes in two ways – you can cover an existing box form or you can create your own box. Let’s put it at a few examples of both.

Covering a RD existing box is, obviously, the easiest way to create a polymer box. It may seem like a shortcut but if you spend a lot of time creating beautiful veneers or sculptural elements for the outside the box, there’s no need to spend a lot of time creating the box from polymer. Remember, it’s better to use the material that makes the most sense for what you are creating rather than limit yourself to one material.

Aniko Kolesnikova, famous for her journal covers, also covers boxes. Using her bas-relief style sculptural approach, she created this commissioned box based on the card game, Magic: The Gathering. The box top worked as a canvas but the dimensional aspect allowed her to flow each of the elements over its edge, taking up the dynamic energy and knowledge. Click on the image to get her blog post about how she made this including sketches and close-ups.

 

Fiona Abel-Smith looks to have created her actual box forms out of polymer and then covers it with a technique she learned, and eventually perfected, from Sue Heaser. The process is based on the classic mosaic-like technique of pietra dura. Laying a clay colored base for the shapes in the images, Fiona then adds bits, cut from extruded snakes of clay, to the image for texture. The intense technique creates beautiful, lively illustrations. Fiona’s also created a post about her boxes, showing her variations and their many sides along with photos of her process. Click the image to see the post.

If you are making your own polymer boxes, you have the option of leaving the square behind in making her boxes in any shape whatsoever. The opening image and the image below are boxes by Helen Wyland-Malchow. The opening image, Box 22, was her winning entry into Polymer Journeys 2019. This one, Landscape Box, below has always been one of my personal favorites though. That is really pushing the idea of a box in such a wonderful and dynamic way. Squares are bit static, which allows the imagery on the box to stand out but curves are fabulously high-energy and fun.

So, how about you? Have you created covered boxes or constructed your own from polymer? That could be a fun challenge this month if you haven’t worked with boxes yet. They make fantastic gifts for pretty much anyone. Who couldn’t use a box? If you’d like to create your own polymer boxes, there is a great tutorial (if I do say so myself) by me on constructing a 100% polymer box in the Winter 2015 issue of The Polymer Arts (also available in digital for immediate download here.)

 

Putting the Lid on It

Well, that’s enough blathering at you for this weekend. I haven’t had time to take pictures of the kitchen backsplash I was working on, which is basically done except for the grout, but I’ll share that with you next weekend, hopefully in its final form.

And last but not least, I want to thank each and every one of you who have been cheering me on the last 8 years, for sending your appreciative and supportive messages, particularly in these the last 4 months. I look forward to you coming along with me on these new and continued artistic ventures as we explore this fantastic medium, growing our creative selves and our community.

 

A Sharing Week

Out of necessity, I’m going to do something a little bit different this week for you. It’s been a whacked-out week. You’ve had them, right? You think everything’s going so well and then one unexpected thing after another pops up, and next thing you know all your top priorities become bottom of the list items, and you can barely find time to sleep much just do the work you intended. Yeah, it’s been like that.

Now, mind you, nothing serious is going on. It’s just a lot of things happening at once. Well, I did seem to do something to my arm – yes, the one I’m trying to heal – but I’m considering that to be a little reminder that just because it’s feeling better doesn’t mean it is. *sigh* Back to being super diligent with how I use that arm!

So, as hard as I have tried every night to sit down and work on this blog these last few days, I’ve simply been unable to. One of the maxims of this break for me has been to listen to my body, resting and sleeping when I need to rather than when my schedule can afford it and so, by the time I sit down to work I’ve been utterly exhausted and just need to sleep. For that, I send my sincere apologies. I promise to get back to it next weekend!

But I can’t leave you on this Sunday without food for thought. So, here is an article that was shared with me some months back by Donna Greenberg. I think the philosophies here are so important for all types of artists and even hobbyists. It’s an article about fiber artist Anni Albers and an extrapolation of her writings fitted into 4 lessons for being an artist. They are this:

Lesson #1: Embrace accidents

Lesson #2: Bring play into the artmaking process

Lesson #3: Listen to your chosen material

Lesson #4: Experiment with new technologies

Sound familiar? I think you’ve heard all but #3 from me a few times on this blog over the years. However, I really like how it’s worded here. Whether you are a beginner or veteran crafter, I think you will find something to spark your work this week. Click here to read it. Then, you might want to bookmark that website, Artsy.net, the Education section, for more wonderful articles and interviews!

If, however, you are one of those who have found it hard to just sit down and create, might I suggest sitting down for 12 minutes and watching this video? They talk often about art in the context of fiction writing but the concepts of resistance and persistence might just hit home for you and get you off to work!

https://www.youtube.com/watch?v=1lTcgSzf0AQ

 

Upcoming Damage Sale  … a Head’s Up

In the meantime, I am going to spend the rest of this US Labor Day holiday weekend catching up on sleep so I can set up our big Damage sale for you all this coming week. This is the biggest price cut on publications I do all year, taking shelf worn and corner dinged publications and selling them for half price or less. I am giving you a heads ups because it’s a limited inventory and many issues disappear within the first day.

The sale will be on Wednesday, Sept 4th. I will send out a quick announcement here so everyone gets a fair chance but otherwise, look for our newsletter with all the details. Sign up for the newsletter here if you are not already on it.

Thank you for your understanding this weekend. I hope you have a wonderful week!

Of Polymer and Paint

August 25, 2019

Have you ever used paint on polymer? If so, why did you chose to paint it rather than use the inherent color? This question is at the heart of a kind of prejudice against paint that used to be rather prevalent in the polymer community. I think painting on polymer has found its place in our repertoire of techniques but statistically (and I’m just looking at the stats I have available from the blog and the general response to articles) I don’t think it gets quite the regard that other techniques do and it makes me wonder if people still steer away from it, even when it might be the best choice.

Ages ago, I unintentionally incited a heated conversation about painting on polymer through a blog post where all the color and the focal point of the piece was painted. There were many comments about how painting on polymer was not “working in polymer” and therefore I should not be writing about it on a polymer blog. This sentiment was rooted in the thought that since polymer is already colored, painting would be superfluous if not downright heretical. This was also a time when polymer was fighting for its place in the art world and competitions for polymer were being won by pieces that were not wholly polymer which heavily irritated those who strove to create only with polymer clay. With a strong love for the material, those crafters were simply strong proponents of letting the material shine through.

Well, a material can be gorgeous on its own, but what the artist wants out of that material may be other qualities beyond its inherent visual ones. For instance, I prefer woodwork that has been treated with nothing but oil and wax to let the natural beauty shine through but wood that is stained or painted can result in beautiful work as well. It’s not wrong to change or obscure the wood’s natural look. It’s just different. Polymer has other qualities beyond it’s color, primarily its sculptural characteristics including the ability to hold very fine detail. So, if its sculptural qualities are primarily what the artist needs from the material, then why not use whatever kind of treatment gives the surface the color and feel the artist finds most appealing or fitting for the work?

The fact is, the color in polymer clay only pieces tends to be fairly uniform since we are working with a material which is colored throughout making it fairly difficult to achieve an organic variation and imperfect diffusion of color. On the other hand, paint which is applied in layers can so readily be everything from dense and uniform to translucent and feathery to gritty and splattered. The facts are that it is easy to get smooth, uniform color using polymer clay but can be tricky with paint and it is easy to get variation in a field of color with paint but takes more work than it is often worth to get a similar effect in clay. In other words, each material has its strengths and so why not employ them based on those strengths?

As an artist, one should use the material that suits the end result desired if the material and the skills to use them are available to them. We’re not talking just paint here either—this applies to any material. Sometimes real metal, with its strength and shine, will work better than faux polymer metal or real stones will glimmer and give a piece the needed weight that faux polymer stones cannot. I am not saying that the real thing should always be used though. Faux materials in polymer do have distinct advantages such as faux metal being lighter and more flexible than the real thing and faux stones are usually cheaper to produce and can be formed in ways that real stones cannot.

Ideally, you start designing a piece with the idea of what you want to make, then figure out what materials would be best suited to the look, construction, durability, and cost of the work as well as your skillset and interests. With this approach, you can make the best work possible rather than limiting yourself because you feel some sense of loyalty to a single medium or the tribe of artists that identify themselves by that medium. That loyalty, like not painting color onto polymer, can be unnecessarily limiting and you could be missing out on wonderful new ways to express yourself and create.

The fact is you and your work do not need to be defined by your primary medium. You are an artist or a crafter or an artisan. You can choose to tack a medium on to one of these basic labels in order to be identified by a related community or as a way to explain very succinctly what you do, but if one day you get up and decide you want to try working with something else, are you going to feel locked into that label? Because if you do, you may be less inclined to explore and that would be sad. As I see it, every true artist is an explorer and one that should not be limited by any one material if their path of exploration leads them elsewhere. That’s just my humble opinion!

So, if you think paint would look good on your polymer, I think you should go for it. Let’s look at a handful of artists who combine paint and polymer in ways that polymer alone would not readily be able to create.

 

Color on Color

If you are a fan of Doreen Kassel’s work, you’re probably in love with either her whimsy or her exuberant color. But did you know, she only works with white clay? Or at least this is what she told me a few years back. Polymer is a sculptural medium for her. Its potential color possibilities do not come into play. Instead, she paints her polymer work primarily with oil paints. The wash and translucency of the oil paint layers gives a unique depth and glow to the colors that you just wouldn’t get with polymer alone. Her use of white as the base, like oil on canvas, does much to brighten the colors as well.

 

 

Miniature polymer creation is another area where paint seems to be indispensable. Now, I am no expert in this area but after working with and publishing articles and projects with Stephanie Kilgast, I have learned just how important paint can be for creating lifelike miniature objects. The clay does provide a large amount of the color in Stephanie’s work but painting is what punches up the realism and her amazing sculptures. Highlighting and antiquing play a major role in the realistic look of pieces like this fungi and coral inspired piece.

By the way, if you’re wondering why Stephanie sculpted this on a tin can, it is because she is very active in promoting environmental awareness and uses discarded objects to celebrate “the beauty of nature in a dialogue with humanity, questioning the lost balance between human activities and nature”. If you like what she’s doing you should consider supporting her on Patreon, a platform for supporting artists you admire with a monthly donation of just a couple dollars. You are then given access to privileged information and insight on the artist and his or her work as well as, sometimes, demonstrations and tutorials. Check Stephanie’s page on Patreon here then check out the service in general. There are some really cool artists sharing some really exclusive stuff on this platform.

 

Lorraine Vogel applies paint to the surface of textured polymer clay using stencils. Polymer clay allows her to create textures that gives the paint variation and dimension, an approach that softens the sharp edge and graphic effect that stencil painting often has.

By the way, you can learn the technique in the above pendant from Lorraine’s tutorial in The Polymer Arts’ Winter 2016 issue, available in digital or print on our website of course. Or you can go to her Etsy shop and purchase one of her comprehensive digital tutorials.

 

And I would be remiss if I didn’t point out that in the last issue of The Polymer Studio, Debbie Crothers shows the possibilities of acrylic paint and polymer in a very comprehensive, exploratory article with numerous short tutorials to get you exploring as well. Acrylic pours on polymer is the technique on the beads that grace the cover. The resulting mix of color and its visual texture is just flat out yummy.

 

Although I am talking paint here, the idea that other materials can and should be used on polymer where they can add or express your ideas best extends to all colorants including alcohol inks, pastels, mica powders, iron oxides, or glazes. Most of these other colorants have been better accepted in polymer work, probably because they change the clay color but don’t obscure it the way paint can. But even in traditional paintings, the type of substrate the artist uses to paint on greatly effects the feel and look of the work. Polymer can be a wonderful substrate, especially since its sculptural properties allow for such a great interaction with the paint and such creative potential for the form of the piece.

So, if you’ve been curious about the various effects you can get with paint on polymer or have wondered if you can combine some other material interest such as fiber, metal, paper or whatever, try it! Mess around and explore. Search online to see what others might be doing with these combinations and let their ideas motivate you to try stretch your skills and creative interests.

So, what new material will you be trying out this week or in the very near future?

The Sage Chronicles

My so-called break has yet to feel like a break, I have to admit. There have been some family matters and siblings who need my support and getting the house back together (and getting rid of all this dust!) is slow going as I try to take it easy with the one gimpy arm. So, I still have a full schedule between that, the family stuff, my physical therapy, and my efforts to come up with a plan for returning to production without getting in this state again. You know, some day, I just want to know what it’s like to be bored. Yeah … that’s not likely to happen any time soon.

For those following the saga of the broken drain turned into a major renovation, here’s a photo of the kitchen after I laid in the first line of slate on the backsplash last week so we could at least make the kitchen fully functional and I could get to cooking properly again! I can’t wait until I actually get to start putting in the design on the backsplash. I’ve never done a mosaic project this big but I am excited and so glad I am giving myself the break just now so I can enjoy the process and not rush it. Or not take 6 months or more to complete it!

So, I’m off to rest up now. I hope you have had a great, creative, and inspiring weekend. Here’s to a creative and inspiring week as well!

 

 

Rousing Repetition

Neon Paper beads necklace by Devi Chand.

First of all, thank you to all you amazing, wonderful, caring folks who sent me notes and words of encouragement and offers of help and even a book in one case, all due to my little tendinitis issue. You are the most amazing people. What a fantastic community we have! I expect most of you are dealing with something frustratingly disruptive in your life and things a lot worse than my little annoyance in many cases so know that my heart goes out to you too. Life is challenging. So, let’s go out and wrestle it and show the universe what we’re made of!

I do have more news but I’m going to save the update on my situation until the end so you can enjoy some artwork first.

Okay, on to the contemplation of art!

Rousing Repetition

This week I want to talk about repetition. Do you like heavy repetition in artwork, where a single form, mark, or motif is repeated over and over? Saying it like that makes it sound boring and unimaginative. But I think repetition has gotten a bad rap. I mean, sure, in some circumstances, like when someone says the same thing over and over again in a conversation, it is going to get on your nerves. But when it comes to design, repetition can be mesmerizing, energetic, and downright stunning. The trick is to put some rhythm and variation into that repetition. Or at least, if it’s very static, it’s best if it is obvious that a lack of variation is intentional to convey stillness, poise, or something of that sort.

I thought we’d pull up some really beautiful examples of repetition to prove the point. You’ll note in all these pieces that although form, shape, motif, or other characteristics are repeated, variation in other aspects of the design choices brings in the energy and rhythm that draws us in. The repeating element also serves to create cohesiveness and unity amongst all the other elements

So, as we go through these this week, identify the repeating design elements in each piece and then the variation that makes the repetition so interesting for you. I’ll show the piece first before I talk about it so you have a chance to consider and see what you come up with. Mind you, you will often come up with things that I won’t and that doesn’t mean that I’m right and you’re not. When art is viewed, it has to be fundamentally about personal interpretation so there is a ton of room for your unique point of view. Asking yourself these questions that I periodically challenge you with just gets you to actively think about the work, homes your eye, and, hopefully, gives you the understanding to verbalize those things so you can translate them into aspects of your own work.

So, let’s get to it!

 

Music in the Monotony

I am going heavy this week on non-polymer artists and I may do a bit more of this going forward too. There is just so much great design amongst craftspeople of other mediums that we could really learn from. I find it refreshing and immensely inspiring to consider how to get the aspects that I enjoy in the artwork of other mediums into my polymer designs. I hope you agree and will stick this out with me! But we’ll start with polymer work.

Here we have some really obvious repetition with a couple of bracelets from Maria Belkomor. A lot of things are being repeated here. How many do you count?

Depending on how you count, there are either two repeated elements– the black carved beads and the disk elements – or maybe four if you count the stacks of beads and the colors. Or maybe you counted more. Everything in these are repeated except for the clasps so pretty much every element can be counted as a repeating one. Variation and, especially, the contrast in the colors and the contrast in the shape between the round beads and the flat disks is what keeps the repetition from being boring. It’s very regular but the bracelets are still fun and visually engaging pieces.

 

Keep in mind, repetition doesn’t mean it needs to all be lined up to engage repetition. Take a look at the pieces below. Parallel lines are used over and over again but aren’t always the same types of parallel lines nor are they seated in the same orientation.

Anna Nel has a lot of fun with her bouncy graphic look by repeating parallel lines over and over but varying them from solid line sets to lines of blended clay, adding pops of color and focal points with the irregularly placed round cane slices. Her variation in color, going from black-and-white to very saturated hues doesn’t hurt the impact of these pieces either.

 

Looking outside of polymer, it is not hard to find gorgeous examples of repetition in construction jewelry like beadwork.

Obviously, the repetition here is primarily in the square beads, all lined up with the same orientation, as well as the repeated dangles. The designer, Beth Graham of Semper Fi designs on Etsy, switches up the color in the squares and the length of the dangles for a simple but very effective variation within the design. There are much more intricate bead designs out there, but I like this example because it highlights the concept in an easy to identify way and works to great effect.

 

I wonder if, in polymer, we might use repetition more often if it was not so easy for us to vary up our elements. I do think there is such a discipline in trying to create dynamic and intriguing pieces without using a wide range of variety to carry it. Just look at this necklace below. It could be polymer but is gorgeously carved, colored, and polished wood.

Liv Blavap’s works are amazing. She works with repetition in a way that it somehow becomes the focal point of her pieces. I think it’s because there’s an almost seamless transition in the variation between one element and the next, making a smooth undulation in the form and, collectively, feeling like one continuous piece even though it is dozens, maybe a couple hundred, individual elements. This approach and her workmanship make you hyper-aware that basic forms are being repeated, if changing along the way.  If you’re unfamiliar with Liv’s work, jump over to this site for a quick peek at more of these stunning necklaces of hers.

 

Okay, one more piece that is not polymer but so readily could be and I think will be quite inspiring for those of you who like to work with sheets of thin polymer or, looking at the pattern only, cool geometric cane work. Paper does really lend itself to repetition as seen by this and the paper necklace of the opening image.

This is paper jewelry by Dutch artists Nel Linssen. Paper quite readily, and beautifully, lends itself to dynamic repetition. The energy here comes with the variation within each element that has been repeated. It doesn’t hurt that they’re basically arrow shapes all pointing inwards making it feel like all the movement is strongly and persistently moving towards the center. Yes, there is strength in repetition as well!

 

Meanwhile, back at the ranch (as they used to say) …

Okay, so, a little bit of an update on the situation over here at Tenth Muse Arts headquarters:

The not so great news is that the conclusion about my tendinitis progressed into something called tendinosis which takes a lot longer to heal and is why I am still dealing with it. On top of that, I have some possible physiological issues which may be the cause of my slow healing (on top of working too much, of course!) The good news is it is all fixable. However, I am going to have to disrupt my usual schedule to deal with this and, with the tendinosis, I am being told that I should stay off my keyboard as much as possible for the next 3-6 months. Ack! That means I can’t do layout, photo adjustments, or anything else that takes just a ton of mouse clicking and keyboard shortcuts. I can still write thanks to speech to text software but not much of anything else.

Translation… I have had to make the decision to halt production on The Polymer Studio magazine for the time being. I’ve also decided subscription purchases will not be available during this time because I just can’t take money for something that isn’t actively in process. That just feels wrong. And yes, I considered bringing on people to help but it would take a while to get anyone up to speed on graphics and editing work and if I’m going to work on myself, I can’t add to my schedule. My crazy long workdays are why I’m having the physiological issues, so I really have to take a pretty full break.

So, I’m making plans to play around with creating some other stuff that would be doable with written, spoken, or videotaped content because I am just not good at not being productive. But without deadlines, I can take my time. And, yes, I do plan to continue to post the blog. I like chatting with you all too much to stop if I don’t really have to!

So, some weeks I might have to go a little bit light, but I do plan to be here to join you on Sunday mornings for low contemplative art. Do please join me next Sunday – I’m putting together a survey to see what you all would like me to talk about on the blog and my other possible projects. I’m working on gathering goodies for a giveaway to go with the survey so don’t miss that!

Have a wonderful, creative, healthy, and inspiring week!

Questioning Focus

July 7, 2019

“Fabiclay” brooch by Klio Tsaliki

Are you one of those people who finds an interesting path and goes down its until you find the end or do you like to wander about? I know that’s kind of a vague question, but you could apply it as a metaphor to goals in your life, the path of your career, or the way you create your artwork. I recently read some excerpts by Thomas Edison on the importance of keeping focused. He said, “The one prudence in life is concentration, the one evil is dissipation.” I don’t know if I wholly agree with that or, at least, I think it’s not so readily summed up in one tidy sentence.

I bet you can come up with at least a couple of artists off the top of your head who have come up with a treatment in polymer clay that they create with almost exclusively and have become quite masterful at it. But I think you come up with quite a few artists who consistently try different things, exploring, growing, and changing their style and focus on the artwork. Would you say that the person who focuses is probably doing better work than the person who is constantly exploring?

Perhaps it’s because we are talking about art that I can so readily dismiss Edison’s comment. I have always thought that, for most artists, art is about the exploration. I think if you find one technique and worked very hard to perfect it, you might get overly comfortable because you will more likely succeed with each successive piece as you hone your skill. And yes, I am presenting that as a possible problem. I am a strong believer in the value of messing up and creating pieces that “fail” on some level. It’s those experiences that really teach us and allow us to grow as artists. However, I do think that masterful artists who stick with one approach do, especially in their mind, make a lot of mistakes and have numerous pieces that failed or fell short of the artist’s expectations for every piece of work we would deem a masterpiece.

The bottom line is, I think whatever journey your imagination and curiosity leads you on is the right path to follow with your creative work. Don’t fight it if you like to stick with one technique and refine it over and over or if you get easily bored once you feel you’ve mastered something enough to understand it and want to move on to the next challenge. The journey of our creative process is as individual and unique as our own artwork.

Let’s look at a few examples of people on both sides of this coin – those dedicated to a primary technique and those that constantly change their focus. Then you can decide for yourself if Edison had a point or not.

Single Minded Tangents

There are so many artists that come to mind that focus on a single technique or process and have mastered it to a mind-blowing extent. Elise Winters is one of the first that comes to mind when it comes to technique. This surface treatment was her signature and her legacy and no one, that I’ve seen, has yet matched her skill with it.

 

When it comes to form, I don’t think anyone else in the polymer community has made more of the same form than Ron Lehocky with his hearts. But here’s an example of staying focused on one thing while exploring just about everything else you can. He’s made tens of thousands of hearts and no two are the same. Here are examples of the variations he came up with from a single Skinner blend.

 

One of the most masterful and single-minded people of process would have to be Jon Stuart Anderson with his cane covered animals and functional objects. Although caning is his focus as far as technique, he is constantly exploring pattern and how it affects the form. It’s a subtle exploration but if you look back through his work you’ll see how the application of pattern has changed over the years and how he is constantly exploring new forms to apply them to, working on how the new forms will show off the canes or how the canes will accentuate the forms.

I love this bowl below. It shows more “quiet space” with those swaths of black to red canes, than I think I’ve ever seen in his work before. The relatively unpatterned area so dramatically contrasts the complex canes designs but you can take in the individual cane and pattern placement more readily because the eye has a place to rest, giving you a moment to rest and to process more of what you’re seeing

 

This whole subject matter recalls to me a conversation Rosanna Faillace and I had with Melanie Muir in Rome last year. We were talking about people who stick with one technique and don’t branch out and Melanie, seeming to think it might be a negative thing, said “That’s me. I’m a one trick pony.” But of course, she’s not. She loves her inlaid mokume gane veneers, but she is constantly exploring construction and different forms on which to present these, resulting in pieces like this beautiful bracelet.

Frenetically Fabulous

I myself am of the exploratory variety of artists. I do wish I had a little more focus and could spend more time on any single technique, form, or process, but the thing is, my curiosity about what else I could do is a stronger driving force, so I go with that. There are a LOT of us artistic explorers in polymer art as polymer just cries out to be explored.

When it comes to an exploratory approach in polymer, Debbie Crothers is the first person who comes to mind. You can see her gorgeous acrylic on polymer beads on the front of the upcoming issue of The Polymer Studio. Her penchant for exploration is why she is writing the “Mix it Up” articles in the magazine. She always has something she’s playing around with and she does love to share. She does occasionally show the results of both her good and not so successful explorations, which I love because it demonstrates her willingness to try, to make mistakes, and to do the work over and over again until she has mastered it. It is highly unlikely that Debbie would have gotten the results she got in these beads below if she didn’t go through a lot of trial and error first. The final results are well worth the exploration!

 

Another person I’ve been following for years is Klio Tsaliki. She’ll try almost anything and, in the process, comes up with some great techniques and approaches. Some attempts come out better than others, but I love that she shares it all, or at least enough for us to see that she is not afraid to try anything that interests her. I find that very inspiring. A couple of years ago she was playing with metallic silkscreen and the possible fabric-like quality of polymer, as you can see in the opening photo of this post. More recently, she’s played with translucent clay and LED lights, as seen below.

Klio’s newest work has been in the up and coming new clay from Fimo, “Leather Effect”. Once cured, this clay is supposed to be very much like leather. You can see here on the Fimo website that it is very pliable and can be cut and even stitched. I don’t know about you, but I have never been so excited about a new line of polymer clay! It’s not available in the US yet, and I don’t know how widely distributed it is in Europe, but there is supposed to be news about that soon and, trust me, when it is available, I’m going to be playing with it quite a bit as leather was one of my first materials I made jewelry from. You can go to Klio’s Flickr photostream to see what she’s been doing with it.

Another name for exploration is pioneering. Pioneers need to explore their subject extensively to find those new and intriguing aspects that lead the rest of us to their fresh finds. In general, you’ll find that most of the folks we identify as polymer pioneers were and are highly exploratory. Just look at what Kathleen Dustin has done throughout her career. From ornate purses to translucent layered brooches to reinterpretations of textile patterns such as with these new brooches below, you never really know what Kathleen will be working on next and yet, all her work is masterfully constructed and impeccably finished. I think her exploration keeps her work fresh for us and, most especially, for her and her passion for her work.

 

Focus on Yourself

So, as you see, there are many approaches to the creative process, all of which have value and result in beautiful, emotive, and inspiring work. So, no, I don’t think focus and concentration on one technique, form, or even material, is necessary but I do think keeping a sharp focus on the overriding creative goal – to make fulfilling artwork, financially supportive artwork, satiating your curiosity, or whatever the important creative motivation is for you – is something to keep a watchful eye on.

Speaking of focus … The construction on my house is in the finishing stages now. That hasn’t helped me with my focus on getting the next issue out, neither has my tendinitis and back issue which was such a huge problem last year. The thing is, in the last year, I have not really had enough time off to completely heal and am having issues again. I’m pretty sure I can get this issue to the printer in time to have it out by the end of the month but I’m probably going to have a heart-to-heart with my doctor on what I really need to do to get this healed and am working out a bit of time off later this month. This is one area where keeping focus would be very helpful!

I will keep you apprised of any shakeups in production if you are a subscriber to The Polymer Studio so just stay tuned here. And next week maybe I can get you pictures of the house for those of you who are curious. Everything’s under plastic wrap right now as they finish plastering and painting. But it’s horribly exciting seeing it come together!

So, I will leave you with these thoughts on focus and exploration. I hope it brings you some interesting insights for your own process and work. Have a fabulous week!

 

Your Morning Book

June 30, 2019

Monika Duchowicz’s Slavic Village polymer journal cover

Have you ever gone to a foreign country and found yourself talking like them after being there awhile? It might just be the phrasing but perhaps you take on accents or hand gestures as well. It’s natural to adopt accents and ways of speaking when you are around it a lot. That’s how you learned to talk as a baby and your brain doesn’t completely turn off that learning from what you hear around you.

This phenomenon can happen with things other than language too. As fashion and décor changes around us, we may find our tastes get tweaked along with them. When we peruse social media sites and see artwork online, we may adopt a tendency towards certain types of design, colors, and forms. This can happen over time or even over the course of a day. That means that what you see online and around you can effect what you create.

So how do you keep your own voice and your style unaltered? Well, you can’t, really. Our aesthetic is formed from our interaction with our world but we can do something about the dominance of other influences over our own unique and personal voice. But it’s like muscle memory and that takes regular practice.

Ages ago, I read a book written in 1920 (whose title and author I have shamefully forgotten) on how to be a writer. The author had one line that really struck me. After stating he explained that a writer must get up every morning and, before doing anything else including getting out of bed, he or she must write at least a page of what we would now call free-writing, because this was the only way to insure the writer would wrote with their own voice later in the day. The section ended with him saying, “If you cannot get up and write a page every morning, then you are not a writer.”

At that point, a writer was all I wanted to be, so, fearful that I would not prove up to the task and therefore, I’d never be a real writer (I was rather young and impressionable then),  I took that line to heart and I wrote every morning, no matter what, for what was probably about 10 years. Getting married and having a family kind of threw me off the habit but I do try to go back to it each time I stray.

When I don’t do this exercise, I do find that my day to day interactions find their way into my creative work. I found out early on that if I didn’t write in the morning, or tried writing fiction or poetry after a long day of reading academic books or writing training manuals, my writing would feel awkward or stilted. It just didn’t sound like me.

I think this influence of other art we see during the day can similarly affect the art we create as well. So, as part of my morning ritual now, I write for 10-15 minutes and then sketch for about the same amount of time. It is a very pleasant way to wake up and, in the process, I flex my unique voice and get my brain geared up for creative work. I don’t always have time to work in the studio but at least every day I am flexing that visual creative muscle and, I find, it makes my creative time easier to get into when I do get to go play.

Even if you aren’t able to spend productive time creating every day, I think you would find that a morning sketch, a quick “clay doodle” (just sitting at the studio table, playing with your clay for 15 minutes), or just journaling about design ideas will go a long way to concrete you personal voice. It will also show you what you are drawn to or might give you some really unique ideas for new designs. It’s something I would highly encourage.

So, would you be up for that? If you choose to write or sketch in the mornings, you can increase your motivation by creating a beautifully covered sketchbook or journal. And since polymer clay lends itself so well to decorating just about anything, why not make a beautiful cover for a blank book, and then keep it by your bedside? With a gorgeous tome to work in, you’re sure not to miss out on a very useful and fulfilling bit of creative exercise.

A Book and It’s Cover

The first person who comes to mind when talking of polymer covered journals is Aniko Kolesnikova aka Mandarin Duck. She does some of the most interesting and detailed journal covers you can find in polymer these days. And she doesn’t do just the front. She covers the back quite often, like on this one here.

If you are the sculptural type and want a ton of ideas to get you going on a cover design of your own, check out Aniko’s Flickr photostream. If you want more than just ideas, go to her Etsy page for tutorials, including one for that gorgeous peacock cover that was featured in Polymer Journeys 2019.

 

The other person that comes readily to mind for polymer covered books, and is one of my early influencers, is Chris Kapono, who, like Aniko, also has an affinity for the word Mandarin for some reason, her shop being Mandarin Moon. Chris’ covers are a riotous mixed-media decoration of polymer with glass cabochons, metal charms, beads, and, sometimes, hand-drawn decoration, as you see in the border of this book below.

Books are a perfect canvas for Chris’ style of decorative polymer. She shares her process as well, through tutorials on her Etsy site and in publications such as her tremendous contribution to the Polymer Art Projects – Organics book.

 

If you would like to create a cover with a more painterly approach, you might aspire to the work of Monika Duchowicz. Her polymer paintings are masterful but she kindly shares process shots on her Instagram account and was so kind to create a tutorial for her style of polymer painting for The Polymer Arts in the Summer 2017 issue.

 

Here’s another painterly polymer artist, Zhanna Bessonova, who likes to go really large. I just didn’t want you to think it had to be a small journal or sketchbook. Pick the size of the book you want to write or draw in first, then decide the cover.

 

I know, I know … the work of these very talented ladies might be intimidating to some people but remember, the whole idea is to make something that can help you find and/or hold onto your unique voice so you certainly don’t need to make covers like these—make them your way! Whatever you can create on a flat sheet of polymer can become a journal cover. Create a cover with a mosaic of textured squares, tons of polymer dots, rhinestones, polymer ‘embrodiery or, heck, canes will do, of course! Strangely enough, I couldn’t really find anyone doing cane covered books. I thought clayers had hit everything with cane slices! They must be out there somewhere! (If you know of some, share the links to them in the comments at the end of this post. Click the header if you are getting this by email.)

Also keep in mind, your cover doesn’t have to be complicated. And it doesn’t have to be polymer. Use whatever you like and do as much or as little as you like on it. Look at this lovely but simple book by a French crafter who goes by shop name alone – Avenuedes Fantaisies. It’s just a polymer honeycomb background and some fun rhinestone bees that were probably pins at one time, but it feels joyful.

You really can attach anything you want to your book cover. It’s for you, so if you are up for the challenge, make it yours!

 

New Issue of The Polymer Studio, coming late July

If you haven’t seen the new cover roaming about social media, here it is! Debbie Crothers’s acrylic on polymer beads grace the front for issue #3. We also have tutorials by Christi Friesen, Anita Long, Beatriz Cominatto, Kathy Koontz and Nika Nakit. There is also a fascinating interview with Beatriz, Brazil’s premiere polymer artist with a branded line of polymer clay, and a peek into the studio of master miniature artist, Angie Scarr. Plus much more.

Start or renew subscriptions or pre-order a copy on the website here.

 

Painter for a Day

I am off to paint a bathroom today then back to polishing the next issue. We might have a fully functional bathroom by the end of the day Monday but only if I can get this part done today. It’s not that the contractors couldn’t paint it but, well, I’m cheaper—I just require some yummy baked goods and a good audiobook or podcast and I’ll work away! And, honestly, I will do a better job. When it’s your place, you just take extra care with things. So, I am off. Enjoy your Sunday and have a beautiful week! I hope you get up every morning before your mind is otherwise influenced, and you write or create something just for yourself. You deserve it!

High On Art

June 23, 2019

Just flew in from Australia yesterday so I’m a bit jetlagged still but I wrote up some thoughts on the plane and pulled some pretties to demonstrate some more ideas on passion in your art, so here goes.

If you are reading this, chances are, you are passionate about art, either creating it or supporting its creation. Can we take just a few spare seconds to admire and be amazed by that passion of yours? I’d suggest that you stop at this moment and really let the emotion of that passion of yours come to the forefront, letting it blossom in the memory of what drives you to create or be supportive of creativity. Can you feel it? Close your eyes if you don’t feel it yet and just give it a few seconds to come to the surface so I can pose a few questions while that emotion is coursing through you.

Got it now? Okay. So, tell me … what color is your passion? Close your eyes if you need to and see what color blooms in your mind.

Then ask, does your passion have a temperature? Is it cool and constant or warm and rolling? Or something else entirely?

What does it act like? Is it like a soft, persistent wind, or a crashing ocean or something in between?

It doesn’t matter what metaphors you come up with for the feeling, you just want something concrete to hold onto. With those sensations and images in mind now, ask yourself, is that feeling there when you sit down to create? Does that passion spill out onto your worktable and direct your work? Does it drive you to come up with ideas or search out and soak up great art and other inspiring sights and sounds?

With all these metaphors and answers in your mind, I want to ask the core question that just couldn’t be put forth until you were in the right mindset:

Do you like what you create and why you create?

That might sound like a strange question because who would continue to create art while not liking it? Well, many of us do. That’s been at the heart of several conversations I’ve had recently, all related to trying to make a living from creative endeavors. That need to pay one’s bills is not the kind of drive that we really want to direct our work if fulfilling our passion is at all a goal of ours.

The fact is, letting out your passion and letting it guide you feel risky because you are putting a bit of yourself out there into the world in that process. Or a lot of yourself sometimes. It’s scary, isn’t it, putting your latest work out, wondering what people will think, whether it will sell or whether the receiver will like it? But it’s thrilling too, especially when people respond to it, when they connect to your work and to you. It’s a serious high.

You deserve to get that high on art. Don’t you think?

 

High on Creativity

I bet you can spy those artists who do get that high on a regular basis, people who let their passion run wild and lead their work. Here are just a few of my personal favorites but start thinking of your own as I go through them.

One of the first people that comes to mind is Ellen Jewett. She has worked in polymer, epoxy, and paper clay, using no tools but her hands and a brush, and makes only what she wants to make. Here is but one of her mind-blowing sculptures.

Her work is born of a unique and driving passion. In her own words:

At first glance my work explores the more modern prosaic concept of nature: a source of serene nostalgia but this is balanced with the more visceral experience of ‘wildness’ as remarkably alien and indifferent.  Upon closer inspection of each ‘creature’ the viewer may discover a frieze on which themes as familiar as domestication and as abrasive as domination fall into sharp relief.   These qualities are not only present in the final work but are fleshed out in the process of building. Each sculpture is constructed using an additive technique, layered from inside to out by an accumulation of innumerable tiny components.  Many of these components are microcosmic representations of plants, animals and objects.  Some are beautiful, some are grotesque and some are fantastical.  The singularity of each sculpture is the sum total of its small narrative structures.

I encourage you to take the time to read her full artist statement. You may be surprised by her approach and amazed by her insights into her own work and purpose.

 

I have found that many of insanely passionate artists are also similarly intense thinkers. Some of these passionate thinkers take their love of art a step further by sharing their passion through education as a way to spark and inspire the creativity of others. Christine Dumont is just such an artist, giving polymer and mixed media artists a place to push themselves and grow through her website Viola and its related projects.

Her own work comes about as a result of intense exploration. She does not create to sell, and I think this gives her a freedom that an artist dependent on their work for their income may find harder, although not at all impossible, to achieve.

Christine will actually be in Switzerland teaching this mix of polymer and metal September 14-15, 2019. If you are interested in joining the class, you can message her directly through her website.

 

As demonstrated by Christine’s passion for teaching, a creative passion doesn’t have to manifest itself purely in your art. Teaching, which takes a particular passion of its own, is just one alternate avenue to steer one’s creative passions. Giving back to others is another way. We had a whole section of community recognition for polymer artists who give back in our first edition Polymer Journey in 2016. We have so many giving and generous people in this community! One of those beautiful people is Wendy Moore who I had the unparalleled pleasure of staying with this past week in Canberra, Australia.

Her creative passion was intertwined with a passion to give back to others when she founded the Friends of Samunnat alongside Nepalese lawyer Kopila Basnet, to help support and give independence to women who were victims of violence. Wendy’s passion and empathy for others is seen directly in her art as well, including this piece I photographed at her home but which you can also find in the Polymer Journeys 2019 edition. It is a representation of her “confusion and angst relating to issues about how we move forward in relationships with Australia’s indigenous people.”

Wendy’s passion has not gone unnoticed outside the polymer community either. It was recently announced that she has been awarded the 2019 Order of Australia medal by the Australian Governor-General for her contribution to the international community of Nepal! This is one of a set of awards and appointments the Australian government uses as a principal way of recognizing outstanding citizens. Join me in a big congratulations to (a probably very embarrassed and blushing) Wendy Moore. Read more about the award along with her interview in this article here.

And you can also look forward to reading in depth about Wendy, her journey, her work, and her life in issue #4 of The Polymer Studio later this year, so keep up those subscriptions!

Here are a few pics from my time with Wendy. I’ll get more photos of the trip up on Facebook where you are welcome to follow me.

 

Wendy and I contemplating the insanity of this immense tapestry which recreated a much smaller painting in every nuance. At the Australian Parliament house’s Great Hall.

 

Forest labyrinth built by some passionate creative person in the bush just beyond Wendy’s house. Wendy and I are walking it with my step-daughter and Wendy’s granddaughter.

 

Photos by Brett Varon

There are so, so many other artists I could point out as examples of deeply passionate people who let that passion drive the work they do, both in and outside the studio. But this is all I have in me to write just now. Right now, I am very passionate about sleep!

However, I would encourage you to continue this search for passion in your daily perusals of artwork online. I would challenge you to keep an eye out for work in which the artist’s passion is intensely obvious and try to imagine the emotion and drive that they must have to create the wonderful work they share with us.

If you aren’t feeling a glimmer of what you think these dynamos must have, perhaps it’s time to assess what you are doing and why. Perhaps you need to infuse your work with new inspiration and materials (as suggested in last week’s post) or maybe you would be more fulfilled spending some of your time teaching (which might include writing articles for publications like The Polymer Studio. Check out our guidelines.) or maybe you need to step back and ensure you are creating in a fulfilling and meaningful way for you, not just for your customers. If your work is infused with your passion, you’ll sell it and you’ll get noticed. Just note how highly passionate art grabs your attention!

Okay, off for more sleep so I can hit the ground running on Monday as I aim to get Issue #3 off to the printer in early July. It’s shaping up to be a really gorgeous issue but I’m still having my challenges here as the house is still in various stages of construction (the worst of it being there are no working sinks except the one in the garage) but the bones of the kitchen are in so that is awesome! Now I can start working on the back-splash I designed. Well, maybe after this next issue if off to the printer.

In the meantime, have a wonderful, inspired, and passionate week!

A Blossoming Passion

June 18, 2019

I’m sorry to say that I have not been able to find sufficient Wi-Fi or cellular service to work on research and photos for this blog. I tried getting these done before I left but it got a bit chaotic and you know what they say about best-laid plans!  But here is another little story about passion that will hopefully hold you over until I return next weekend.

Clownfish in anemone

Photo by David Clode on Unsplash

I am on Kangaroo Island in South Australia right now. 2 days ago we were in Cairns off the Great Barrier Reef where we got to see a real passion bloom in our teenager. My step-daughter just graduated high school and this trip was her graduation present. Australia and the Great Barrier Reef, in particular, were chosen because she is entering college as a Marine Biology major. She had to declare a major when she applied but the truth is, she is not at all certain what she wants to do. She is interested in conservation and environmental issues so the reef and its survival through the ravages of global warming is something that resonates with her.

In Cairns, were lucky enough to find a snorkeling trip run by a very passionate marine biologist who took us out on the reefs and educated us for a good hour on the creatures of the reef, the ecology, and the efforts being made to save it. Our teenager soaked it all in, every word. You could see her interest blossoming into an intense passion before our eyes. She couldn’t stop talking about it. It was so lovely to see that. I nearly cried.

This is not to say that she might not change her mind later but I do think we witnessed the start of an intense journey out there in the aqua blue ocean. Do you remember when your passion for art or for polymer occurred? Do you remember the feeling? Is it still there?

If that same passion doesn’t still exist, it is okay to consider a change. I have had so many passionate excursions in my life although writing and creativity have always been out front. Sometimes we just need to get out and adventure to figure it out or find it again. Sometimes those adventures just reaffirm or invigorate a passion that already exists but perhaps those passions needed a new and novel experience to energize them again. Or perhaps it is not the subject that is in question but what you are doing with it.

The blog I had planned for this week was originally about that—figuring out if we are doing what we want with our passion and our love of art. It is a question that needs to be asked regularly. Sure, routine and inertia can keep you going even if you’re not completely happy with what you are doing, but shouldn’t we strive to do what we love if at all possible?

This week, I’d like to suggest that you try something new every day. Not just in your art but in your daily life. Drive a new way to work. Shop at a different grocery store. Take a day hike at a nearby park or area you’ve never been to. Wear your hair differently. Try a new food or restaurant. And in the studio, try a new technique, just once at least. Or try a new material even. Or a new form—so if you primarily do jewelry, try sculpture or wall art. Set yourself this challenge just to shake it up and see what you discover. You never know if a new passion will bloom inside of you from just one little different adventure.

Simply Stunning

Tanya Mayorova

Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.

I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.

With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.

Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.

A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.

 

Beads Beyond the Basic

Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.

Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.

Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.

 

Tanya doesn’t have a tutorial posted for this, but I can help you with that:

  1. Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
  2. Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
  3. Carefully blend the seam where the ends meet.
  4. If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
  5. Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
  6. You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.

Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.

 

The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.

I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.

Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.

 

Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.

These are created by Rebekah Payne who generously posted a tutorial here on how to make them.

 

A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..

 

You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.

 

The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!

Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.

 

Beads Away!

The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.

There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.

  • My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
  • Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
  • If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
  • Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
  • For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.

 

Holes

Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!

For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.

There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!

However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts

 

Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!

MidWeek Update – 15% Off Sale, Mokume link, and Sampler Magazine

January 31, 2019
Posted in ,

I know I was talking about having the blog once a week, and that is the plan, but for corrections and any really exciting news, I may be dropping in mid-week, like now. Ignore me if you’re busy – I get it!

 

15% OFF SALE … Only through Friday, Feb. 1

Exciting money-saving stuff first … we are running a spur of the moment 15% off sale on books and back issues including the fabulous Polymer Art Projects – Organic book, and back issues of The Polymer Arts. Subscriptions and single issues of The Polymer Studio are not included in this sale, nor are the All Back Issues packages … but those are 40-50% off instead!

Grab books and magazines in print or digital format at www.tenthmusearts.com through February 1st.

Use Promo Code TMA15

 

Sampler Flipbook of The Polymer Studio

Now, if you haven’t subscribed or purchased a copy of the new issue of The Polymer Studio, here is a little bit of a tease for you. This link right here leads you to a sampler of most of the first pages of this new issue for you to check out. Find the crossed arrow icon and click to go full screen when you get there for the best view.

Go peek at it and then once your curiosity is piqued, get your full copy on our website to get fully immersed!

 

New and Missing Mokume links

Now on to an apology … the mokume billet image on Sunday’s post was apparently too small and was fuzzy on many an email and device and the link to the original page was missing. I’m so sorry about that. It’s added in the post now but for those who wanted a closer look, you can find the metal mokume process chart here. Mind you, that chart is in German and is but one method for making such a ring. However, here you can find a mokume video showing another approach, one that could be directly recreated with polymer … hint, hint.

 

Thank you for your Feedback!

And last but not at all least … I just wanted to thank all of you who left comments about the new blog format. It was a resounding “yes” to the more in-depth once a week approach which so gladdened my heart. And now it is our It’s a great reward for me to see so many of you are enjoying it. So I am excitedly outlining content ideas for future posts but if you want to push for anything in particular, leave a comment below this post (email readers, click here) and I will happily look into it!

 

Read More

The Weekly Polymer Arts … ?

January 20, 2019
Posted in ,

Well hello there! Surprised to see me on a Sunday? Well, I am here because I am trying something different. To start with, you may have noticed that blog posts were missing this past week. My apologies for that. Suffice it to say that my system, and life in general, made me take a break and so it was not until this weekend that I was able to put something together for you.

The funny thing is, I had already been looking at changing the frequency of the blog. We only have so many minutes in the day for all the fun stuff that comes our way and its more likely that we’ll set aside the stuff seen regularly than the rarer offerings. I’ve decided that I’d like this blog to be one of the rarer offerings, making a tiny contribution to the de-cluttering of your email inbox or RSS feed and giving me a chance to put together some juicier posts for you.

So, how does once a week sound? On a weekly post, I can share a couple of pieces of fabulous art along with polymer relevant news and fun takeaways like tips, tutorials links, sales, and discounts from polymer retailers. And how does this Sunday arrival feel? Cynthia already provides us a jumpstart to creativity on Saturday with Studio Mojo, and the weekdays seem a bit overburdened with news and emails and so I propose being a part of your Sunday, giving you a bit of eye candy, inspiring ideas and useful news to start the day or wrap up the weekend. And if the blog comes to you as an email at work, well, it will be there waiting to brighten up your Monday morning.

So let’s get rolling.

Some news first, since it relates to the beautiful mokume you see here … The first issue of The Polymer Studio was released yesterday, Saturday the 19th, and already the response is a glorious hurrah! Whew! The first of anything is always a bit nerve-wracking to put out but feedback has been nothing but glowing so far. If you were expecting to get a digital edition, it went out at the crack of dawn East coast time so check your inbox (and if it’s not there, check your spam folder or write us). Print editions went out in the mail Friday so they are on their way as well.

If you haven’t subscribed or ordered a copy yet, do it soon so you’re not missing out on some really wonderful tutorial projects including this “Kitchen Sink” mokume technique from Julie Picarello. You get the step-by-step on how to make the brooch/pendant you see here as well as how to create the “dropout” pieces you see surrounding it, from the same mokume blocks. Working with the translucent layers to get this intricate mokume is easier than you might think and it’s just too much fun seeing what comes out in your slices.

So, if you haven’t gotten your copy ordered or started your subscription already, you can do so on our website at www.tenthmusearts.com.

 

I have also been sent a special offer from Helen Breil. She just released a new techniques video class, Six Exceptional Textures, and you can get it now for 15% off!  If you have not yet had the pleasure of creating alongside Helen in one of her tutorial books or videos, you do need to treat yourself. She divulges a wealth of tips and ideas in crystal clear and highly detailed instruction. This video class includes step-by-steps, ideas and inspiration for making your own unique handcrafted one-of-a-kind texture sheets in 9 packed videos. Click here to get it. The discount is good through January 31st.

Okay, that is enough news and fun opportunities for this surprise Sunday post. I do have exciting plans for this once a week format so be sure to open it up next week and see what the regular postings will be like going forward. If you want to be sure you get all our news and publication announcements, sign up for our twice monthly newsletter as well. In the meantime, enjoy all the creative things you’ll be trying out when you get your new issue of The Polymer Studio!

Read More

Its Time! The Polymer Studio Subscriptions & Bonus Gifts

November 19, 2018
Posted in ,

Today we’re going to do a little bit of business but it is exciting business!

I am so pleased to announce that subscriptions to The Polymer Studio are finally available online. I appreciate your patience while we worked all the kinks out in our new website but yes… there is also a new website! Tenthmusearts.com will house all of our publication information, purchasing, the biggest polymer resource list in the world, and your account if you’re a subscriber. We are very excited about the beautiful new layout and worked to make it as easy as possible to navigate but if you have any suggestions, don’t hesitate to write us.

If you subscribe now, before the end of the month, or you are an existing subscriber to The Polymer Arts rolling over into the new magazine subscription, you will receive a couple of gifts to thank you for your support and to hold you over until January when the first issue comes out: bonus discounts and a video magazine!

Bonus Discounts! Subscribe before the end of the month and we will send out an email with exclusive discounts worked out with some of your favorite online polymer shops. As we enter the holiday season, you can use these discounts to purchase gifts as well as stock up on your own goods all while supporting small independent businesses run by polymer artists and enthusiast like yourself. You’ll get discounts and deals from the likes of Christi Friesen, Shades of Clay, Linda’s Art Spot, Nemravka.cz, Helen Breil, ilove2Craft, Lisa Pavelka, The Whimsical Bead, and Tenth Muse Arts. Give us 1 business day to get that discount email to you.

Video magazine! What is a video magazine? It’s just what it sounds like—a collection of videos on a number of related subjects, collected much like articles in a magazine. This is an idea I started looking into earlier in the year and I will wrap up my first trial edition to share with all new and existing subscribers—you get to be my exclusive viewers who can help me shape this into a possible future publication or bonus material for magazine subscribers. Not sure where this is going yet but it sounded like fun for us all!

For this trial video magazine, you get to hang out with me in my studio and Tenth Muse headquarters for a behind-the-scenes peek at how we put together a magazine, as well as seeing a number of product demonstrations and technique tips. I’m still working out details on the other cool things going into this but I guarantee it will be a great time and should hold you over  some until the magazine comes in January. So subscribe now if you’re not already on our subscription list so you don’t miss out.

For more information about the new magazine or to purchase books or back issues, go to the new website at www.tenthmusearts.com.

Read More

The Last Polymer Arts … but announcing The Polymer Studio!

August 24, 2018
Posted in ,

The End of a Magazine

I regret to announce that the upcoming Fall issue of The Polymer Arts will be the last issue, in its present form. Thanks to all its wonderful contributors, The Polymer Arts had become a highly influential magazine as well as an amazing and humbling journey for me but fate has pushed me towards other plans.

We wanted to give you the news before we shut down the subscription purchases (back issues and pre-orders for the Fall issue will still be available) and people started wondering. But we didn’t want to leave you on a sad note, so here is the good news!

The Birth of a New Magazine

A small group of very persistent people have pushed me to start a new venture (and are joining me in this in a few cases) that we hope will draw new people to the wonderful world of polymer clay. I’m thrilled to be able to announce that we will be publishing a new magazine for the polymer community, The Polymer Studio, with its first issue scheduled for a January 19th release.

This new magazine will continue to encourage readers to improve their skills and think creatively through quality content such as:

  • Inspiring project tutorials from all over the globe, for all levels
  • Expert instruction for improving skills and learning new techniques
  • Tours inside the studios of unique and well-known polymer artists
  • Invaluable studio tips and tricks
  • Revealing artist interviews
  • New product reviews
  • A myriad of inspiring ideas and eye candy
  • Regular articles by some of your favorite contributors including Christi Friesen, Ginger Davis Allman, and Anke Humpert, as well as myself.

We hope this new magazine will provide the new to intermediate polymer clay crafter with that regular, affordable creative shot in the arm that has been missing recently in periodicals, helping to fulfill your passion for learning and enjoying this fantastic medium.

Be an Early Subscriber for Discounts and a Special Gift

Subscriptions and pre-orders will be available in a couple of weeks.  Go here to sign up to be notified when it goes live. Early subscribers will receive:

  • An additional 10% off their subscription
  • A very special little gift in November to hold you over until January.
  • And the immense appreciation of the staff for your enthusiasm and encouragement.

Sign up for the Purchase & News Notifications here.

Would you like to be published in The Polymer Studio? We still have room in the inaugural issue for a few more project tutorials. If you would like to submit, send your tutorial ideas and a photo or two (or link to photos) to submissions[-at-]thepolymerstudio.com. You can also go to our Contributor Guidelines page for more information.

For The Polymer Arts Subscribers and Fans

Subscribers with ongoing subscriptions to The Polymer Arts will be receiving The Polymer Studios as of January 2019 as well as our little special gift in November to thank you for your patience during this transformation. This also means there will be no winter issue but, as most of you know there will be two books that you can look forward to that will be coming out before the end of the year. Wrapping those up is why production of this first issue will take until January.

If you have any questions about your subscription or the changeover, please write us at connect@ThePolymerArts.com

For those of you who enjoyed The Polymer Arts and all the conceptual articles and discussions, I’m not setting those aside completely. There is another related project on the drawing board that I will be investigating further after the periodical changeover is taken care of. So stay tuned!

If you’re curious about some of the reasons I had to close The Polymer Arts and, instead, started this new magazine, you can read about it on the About page on www.ThePolymerArts.com.

 

 

Read More
If you love these posts ...