Get Caning!

So my request earlier this week to have people send in caning links for this week’s theme resulted in more questions from people just getting into it. Since there were so many queries, I thought I ought to take a moment to address the basic question these emails had in common … how does one get started or work on moving on from the basics? (For those of you who are quite advanced, this list and links might be helpful as a list for your website [I imagine you get these questions too!] or to recommend before a caning class to get your students to work on the basics.)

So here’s what I would recommend if you are starting out caning …

1. Take a class. So much of what goes into caning, especially reducing, is rather difficult to explain without hands on demonstrations. Check with local guilds, bead stores, the IPCA website, and The Polymer Arts resource list to see what is going on near you. A keyword search using your state/country, “polymer” and “classes” or “workshops” might bring up a few things as well.

2. Get a book. A book with a lot of detail and variety of projects to try your hand at could get you far. Some of the better ones I know of are Sue Heaser’s Polymer Clay Jewellery for Beginners: Book 1 – Millefiori Canes
Donna Kato’s The Art of Polymer Clay Millefiori Techniques and Patricia Kimle’s Exploring Canework in Polymer Clay: Color, Pattern, Surface Design.

3. Search the internet for caning tutorials. This will give you a broad variety of techniques and approaches to explore. If you’re a self-starter and really motivated, this is usually the least expensive option as many of the beginning cane tutorials are free. Once you get more advanced, you may want to invest in some of the tutorials sold on Etsy and CraftArtEdu.

One of your fellow readers, Meg Newberg, sent along this link of free cane tutorials which she also regularly posts on her very active Facebook page, Polymer Clay Workshop. Here is a post photo from her Facebook page a few months back that I thought was just a beautiful collection of kaleidoscope canes with nicely chosen color schemes that she was working on.

401956_504398722961389_122962725_n

As I am admittedly not the caning expert and so many of you are,  please do add your thoughts in the comment section if you have further ideas for those new to caning. Many thanks!

 

blog Banner Ad 230x125

Decorative Polymer Bails

If there is any pre-made finding that polymer versions replace as well as, if not better, I think it would be the bail.  Of course, many of us integrate polymer bails into our pendants and focal beads almost without thinking. But you can also create a stock of decorative polymer bails that can be used in combination with jump rings, or embedded in the clay as needed.

My most basic polymer bail stock had always been extruded hollow tubes in scrap clay. I would make them fairly thin-walled and bake them so I had sturdy base tubes to cover in my choice of raw clay, which I could then press onto newly created pendant pieces. Easy, quick, and made to match the pieces.

However, I have to say I was very intrigued when I found these polymer and wire combination bails created by Марина Горячих (translates as Marina Hot which may or may not be the best English translation).

bail-collage

Of course, I have a thing for the filigree work, but most any kind of decorative clay work would make for some interesting bails. She goes through the steps for making these bails on her LiveJournal page here – just replace or adjust the decorative filigree with your type of work. Definitely worth trying out!

Polymer Connections in Toggle Clasps

This week I thought we’d do look at polymer fasteners – the connections and findings made from or dependent on polymer for their construction. One of the reasons I want to look into this is because of a new section in The Polymer Arts magazine called “Polymer Jeweler’s Workbench”. In this regular section we’ll be exploring techniques, ideas, and designs specific to jewelry created in polymer.

In the recently released Summer issue of The Polymer Arts, we feature combining wire findings with polymer; but one can easily create findings from polymer itself. Here is a straightforward example of polymer toggle clasp findings by Tina Holden.

Toggles

 

The great thing about making polymer clasps is, of course, that you can make them to match the design of the piece using the same colors, textures, and motifs so the clasp becomes a integral part of the necklace or bracelet design, not just an add-on.

Tina is a very inventive and creative polymer artist. She shares many of her wonderful techniques through her tutorials which you can find on her Etsy and Artfire shops including one for the clasps you see here.

The Many Possibilities of Faux Ceramics … & a Cool Giveaway!

I’m still debating on what direction to go this week. I have been sent some wonderful new art from Iris Mishly based on a new series of faux ceramic tutorials she developed with Hilla Bushari. I’ve been thinking about having a faux themed week but then I was intrigued by the variation in types of pieces Iris and Hilla created with this technique–everything from flower beads to beads that look like tiny houses to tea caddies to incense burners to cuff bracelets and on and on–and I thought maybe we should talk about variation and pushing what you do with a particular technique. I still haven’t decided so … tomorrow’s post will be a surprise but it will be determined by you! (Read on about how you can help me decide and put yourself in the running for a free Sample Project!)

So, let’s check out what Iris has for us. She just put these tutorials up just last week. They do have an amazingly realistic ceramic look. These ladies got so creative with her beads too. Look at this strangely beautiful “Moon beads”, both otherworldly and organic in style.

polymer-clay-faux-ceramic-moonrocks5 _640x480_

 

 

And if you like making home decor, they’ve created quite a few unique items like these tea caddies–they’re adorable and so much more appealing than stacking those boxes of tea on the counter.

polymer-clay-faux-ceramic-timefortea-3 _640x480_

Here is what Iris says about her new tutorials:

“The tutorials are covering 10 different beads designs and 8 final projects, each is examining the different faces of faux ceramic – textures, surface treatments etc. In general, the projects are demonstrating the various ways we came up with to imitate ceramic glazed products; some are dimensional, some flat, some created with chalks, pastels, gilders paste and some with alcohol inks. Each project is accompanied by a separate video and screen shots in a PDF file. The videos are for the ones who want to see the complete process from start to finish, and the pdf is for those in a hurry and want to go briefly over the photos.”

So if you’ve been looking for something new to explore, these look to be all too much fun. And Iris’ tutorials are beautifully created with lots of tips and carefully thought out steps. You can see the full array of possibilities (not that there is a limit to what you can do here!) on the PolyPedia Online website.  Iris and Hilla are also giving away sample beads to the kit purchasers who buy the best set. 

WIN A FREE SAMPLE PROJECT!

Iris and Hilla have been kind enough to offer a free *sample* project from the complete “Cosmic Ceramic” tutorials to one lucky reader commenting on this post. Just tell me whether we should cover faux techniques or the subject of technique variation the rest of this week … or post a comment about whatever this post brings to mind! The winner will be announced in Thursday’s post!

Winding Up with Ragged Edges

Yes, a few more swirls and curls to wind down the week. Here I want to ponder the edge that makes the visual swirl in a three dimensional form. It’s a chance to consider that there’s texture on every side of the clay.

A strip of clay has a front and back … and a side. The side, although difficult to texturize with any impact of its own, can create a texture itself. And if you do add texture to the thin side and then compound that texture by, say, rolling it up to create a texture in form, you can develop a very rich effect. Tanya Mayorova does this with a technique to develop a ragged edge texture that even with very muted colors comes across as quite dynamic.

17107_600

 

Tanya shares her ragged edge technique in a a brief tutorial on her blog here.

 

Gather Your Flowers

My mother is a horticulturist so although I have never been heavily drawn to flowery things, I learned through her to fully appreciate the beauty of a well-formed bloom. Polymer artists, as a whole, do like their flowers likely because so many of our ladies are drawn to their inherent beauty, but also because the complexity of a flower can easily be achieved through the repetition of relatively simple petals. But the petals of a real flower are, in reality, quiet complex, each petal with its own curls and waves and way of enfolding the flower’s center. To properly reproduce this complexity, each petal needs to be given a little individuality. That is what I enjoyed so much about finding these little beauties by Taisa Chernyak.

8SirS35VbJc

It might take a bit longer to give each petal its own form but don’t you think the individuality of each gives the whole a much more convincing and natural beauty? Take a look at her tutorial on how she produces these life-like blooms.

The idea of each individual providing the character that creates the true beauty in the bigger picture is true on so many levels. Even as individual artists, bringing our own personality and uniqueness to the artwork we produce creates a more splendid picture of polymer art overall. Repeating what has already been done will add very little to the art world, but your own unique art adds much, much more.

Lessons in Back-filling

February 27, 2013

Even if you are not into making rings, you will want to take a look through this series of tutorials by Bobrotermit (on Livejournal). His planning, carving, and especially his back-fill methods could lead you to do some experimenting with other forms if not with rings.

This ring was formed, carved and back-filled. All the designs are back-fill color, no painting or caning.

_c_003

He also treats us to tutorials for two other rings, one primaily carved, the other primarily back-filled. Take a moment to look through his tutorials. They are full of great ideas that can be applied to your favorite form.

 

 

Fun with Leftovers

I don’t know how many pieces I’ve made resulted from looking over at my scattered scraps and suddenly seeing a new texture, form or design in the randomness. Its kind of like finding animals in the shapes of clouds … you look over and you see shape for a pendant, the texture for necklace or a form that could make an interesting bead.

So when perusing some collected online tutorials, I stopped at this very pretty bit of modified mokume which is pictured in a tutorial titled “How to make faux snake skin or honeycomb veneers” by Desiree McCrorey and really wished I could grab, not a slice from the revealed slab but rather those first holey layers off the top. Wouldn’t they look just so striking pressed onto a sheet of pearl clay, those thin little edges of purple around the circles framing the background color?

Rept009D

I wonder how many other people out there automatically do that as well? I know Helen Breil does … that is how she came up with the curling and frame type shapes which are the basis of her new book Shapes (which we review in the upcoming Spring 2013 issue of The Polymer Arts.) That kind of eye is hard to teach. But I would recommend that before balling up your scraps and tossing them in the scrap bin you look at what you have and see if anything jumps out at you. Just that could send you on a whole new journey and invigorate your line if you are looking for something new. You just never know and all it takes is keeping your eyes wide open.

Scrap Clay Caning

February 2, 2013

I broke away from the magazine madness for a moment today to relax with some perusing through Pinterest. While everyone else gets sucked into Facebook, artists get inexorably pulled into Pinterest. It can’t be helped. It’s kicks in a kind of visual ADD. Oh, shiny … and colorful … and creative and … oh, how did they do that! Its terrible.

Luckily, the spell is broken and I manage to escape when I see something too cool not to run over and share here on the blog. Today it was yet another way to take scraps and make something amazing with it. This cane component and the intermediate steps to a scrap clay cane below were created by Ronit Golan. And no, this is not scrap canes as in Alice Stroppel’s approach, although the first half of the process isn’t too far off from hers, but just scrap bits and pieces of clay.

TEXT D

 

The big difference between this and the Stroppel cane is that you can use this approach to create a kaleidoscope cane. Isn’t that cool?

Check out the full tutorial and examples on Ronit’s blog here. Thanks goes out to Karin Ashdown for pinning this from Ronit’s blog for us to discover.

Diving into Exploration

April 4, 2021
Posted in ,

Flickr’s Dragonfly555 shows off impressions samples.

Do you feel like you have to make a finished piece or be working on a particular design when you sit down at your studio table? Sure, it feels good, and it’s very exciting to have a finished piece to show and share, but learning a craft is as much about exploration as is about creating finished work.

So, if you’re not giving yourself that exploratory time, let me give you some reasons to highly consider it. And if you do a bit of exploring already, maybe I can offer up some new ideas about ways to use and organize your exploratory bits that you might not have tried.

 

The Exploratory Reasoning

When you’re fairly new to a material, technique, form, or construction method, it is to your advantage to spend time just playing with it. This is especially true, I think, of texture, mark making, color mixing, new techniques, and new materials including new brands of a familiar material. Trying to make finished work before you are familiar with the technique or material can get frustrating, if not downright depressing. You can gain more success in the long run if you develop a better understanding of what it is that you’re working and hone your skills a bit before gambling your time, materials, and hopes on finished work.

It certainly can be tempting to just pick up something and see what you can make with it right out the gate. With a lot of home craft materials, polymer clay in particular, you can create a decent completed piece within a day of picking it up. However, the ease of these materials is a bit of a deception. They may be easy to get started with, but mastering them, even just a little, takes time and effort. Give yourself a gift of that time to get to know what you’re working with without the pressure of trying to finish something presentable.

 

Samples to Reference

Mica powders with sample chips

Probably the best way to explore new materials and techniques is to make small samples, ones you can keep and reference as you make decisions for future finished pieces. If the color of the sample is not relevant, you can just use scrap clay. If you use clay straight out of the package, you may also have an option to transform the samples into finished work. Let’s go over all these options.

(Although I’m going to talk specifically about polymer clay, if you work primarily in another material, consider an equivalent process. Consider how you can cut out or form small samples that can be saved as references. See if this clay focused process inspires you.)

For some orderly exploration, sheet your clay and then hand cut or punch cut the sheets into whatever shapes tickle your fancy. Then you can just go crazy with whatever you’re exploring. Use as many of these pieces as you like for each process you’re exploring. Keep the ones you are pleased with, etching with a needle tool or, after curing, writing on the back with permanent marker, what you made them with. Keep cured pieces in a baggie or punch holes in them before curing so you can string them on wire or chain, making them easy to flip through.

If you are playing with textures, mark making, or any kind of tooling on polymer clay, I would suggest sheeting three different thicknesses—the thickest setting, a medium setting, and the thinnest setting on your pasta machine. Then try out each of your experiments at least once on each of the three different thicknesses. Anything that impresses or otherwise moves around the clay will be affected differently by the clay thickness, sometimes subtly but sometimes quite dramatically.

Cure the samples you like, being sure to inscribe or write a note on the back indicating what thickness the clay sheet was along with what made the impression or marks.

If you’re color mixing, sheet the finished color, then punch out a decent sized shape, one that has enough room for you to write down your proportions for that color mix. For example, if you mix a deep rich purple by combining 6 parts cobalt, 3 parts magenta, and one part black, inscribe on the back:

6X blue

3X magenta

1X black

Also include a big initial for the brand of clay (P for Premo, F for Fimo, K for Kato, etc) since colors by the same name in one brand are usually nothing like those colors in another brand.

You can also note proportions visually by punching out a circle of clay, smaller than your mixed sample, from each of the colors you used in the mix. Cut out portions, like pie slices, from each color in proportion to how much was used in the mix to re-create a single circle showing how much of each color was used in the mix. Don’t forget to inscribe your initial for the brand of clay. See the image here for an approximate example of the purple mix above.

Adhere this combination pie to the mixed color shape, punch a hole in the sample, cure, and string on a chain or wire.

(If you are confused about how to figure out the parts aspect of the color mixing, just use a small cutter to punch your unmixed colors out of sheets of the same thickness. Each piece is a part. Use these punched bits of clay to make your mix, keeping track of how many pieces/parts you use to create the color you’re making.)

If you’re playing with a surface colorant, try it on both white clay and black clay or on clay colors you use quite often. It’s a rare colorant that doesn’t allow the clay base underneath to the show through, so trying it on black and white will give you an idea of how the colorant will appear on lighter versus darker colors, not just black and white.

I punch small-ish circles out of white and black sheets of clay, then I cut them in half and put a white half with a black half. I apply the colorant to these splits chips. After curing, I glue them to the colorant’s product container so my reference sample is right on the product. You can see here how well this works for those little mica powder containers, above. I keep them in a drawer with the samples facing up so I can quickly find the color I want.

The best part about all these samples is that while you’re designing a finished piece, you can pull them out and compare them side-by-side to see what works well together. You can also hold them up to a partially finished piece to see what you might want to add. Personally, I can’t imagine working without all my exploratory samples.

 

Turning Discovery into Works of Art

Just a few pendants and beads I made with extra texture samples by reforming and/or adding pin lace layers of clay. You can learn the pin lace technique in the February VAB here. The VAB PDFs are 40% right now too.

Now, for those of you who are anxious to produce something with your time at the studio table, you can take any samples you’re not going to save for reference and create with them. You can add additional layers, reshape, or attach embellishment to your extra samples to easily create pendants, earrings, or brooches. You can also use them for collages or mosaics.

Keep cured samples, even if you’re not going to use them for reference, for further experiments where you want to play with cured clay techniques or to test new glues or sealants. This way, not only is your time not wasted, neither are any of the materials you’re playing with.

 

Give Yourself Permission to Explore

Whatever your inclination, the big take-away here is that in-depth exploration can, and probably should, be a regular part of your creative process. Give yourself the permission and time to do this throughout your creative journey or career, not just when you’re starting out.

Keep in mind, not only does this kind of exploratory time hone your skills, your familiarity and confidence with the processes and techniques grow stronger and faster than they would if you tried to learn just through making finished work. This is because you are willing to take more chances with these scrap samples. They just don’t have the same stakes, right?

And, you know, taking chances with this exploratory sample work should eventually translate into taking bigger risks with your finished pieces. I think, when we take the big risks, that’s when we make the biggest leaps and create the most amazing work. Well, sometimes we make absolute disasters as well, but it’s all part of the process. You’re certainly less likely to have a disaster if you do a lot of exploration first.

Christi Friesen shares unusual and creative mark making in the March Virtual Art Box

So, if you have not let yourself just explore and play with the materials you work with, maybe, this week, you can either set some time aside or make all of your studio time exploration time. Making many of your mistakes in the exploratory phase and not always on completed pieces will make your creative time more efficient, less stressful, and more enjoyable.

 

Texture Hungry?

If you’re one of those who is looking for more ideas and direction on texture, don’t forget we have an entire issue of The Polymer Arts on texture, the Fall 2017 issue. Also check out the mark making focused edition of the Virtual Art Box from March of last year. All Virtual Art Box content that was previously members only is 40% off right now.

 

 

The Last of the March Giveaways

Our month of giveaways has ended, but all your wonderful comments have given me so many ideas for upcoming posts. I thank all of you who commented so very sincerely!

I have one last giveaway winner to announce. Valerie Hall is receiving the last batch of my giveaway Polyform clay. I was very excited about this. Valerie is a very active and giving soul who has been trying to teaching through the great clay shortage of 2020 in any way she can. So it’s fantastic to aid her with this clay package. Congrats Valerie!

This was so much fun. I will try to do this here and there as I receive samples or find opportunities to gather stuff for you. So stick around for more free stuff in the not-too-distant future!


 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…


 

Read More

Simply Stunning

May 19, 2019
Posted in , ,

Tanya Mayorova

Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.

I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.

With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.

Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.

A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.

 

Beads Beyond the Basic

Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.

Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.

Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.

 

Tanya doesn’t have a tutorial posted for this, but I can help you with that:

  1. Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
  2. Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
  3. Carefully blend the seam where the ends meet.
  4. If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
  5. Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
  6. You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.

Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.

 

The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.

I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.

Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.

 

Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.

These are created by Rebekah Payne who generously posted a tutorial here on how to make them.

 

A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..

 

You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.

 

The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!

Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.

 

Beads Away!

The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.

There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.

  • My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
  • Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
  • If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
  • Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
  • For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.

 

Holes

Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!

For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.

There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!

However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts

 

Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!

Read More

Hole-y Design

March 10, 2019
Posted in , ,

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Read More

Beauty in Old Clay

January 31, 2018
Posted in ,

If you haven’t seen this technique, created about a decade ago by France’s Dominique Franceschi, you really have to try it. Like Monday’s post, this too came out of an accident, one many of us have probably experienced to some degree. It was from dry, crumbling clay, once again ruining our expectations. Well, Dominique took that experience and ran with it and what a beautiful texture arose from playing around with this stuff.

Basically, she extruded some older clay and it cracked all up and down the length of it. Instead of tossing it, she wrapped it around base beads, flattened and smoothed the clay, and ended up with these beautiful, organic looking textures. Wonderful stuff.

Her full technique was shared and translated on Parole de Pâte way back in 2006. But just because it’s an older technique doesn’t mean that it can’t be new or newly played with. Try it out and maybe you’ll even have some pleasantly unexpected outcomes by using it slightly differently such as laying it on a sheet to create surface designs that can be made into jewelry or wrapped around boxes. Or what would these cracked snakes look like and how would you use them if you tried just smoothing out the snakes alone? In any case, it would certainly be fun to play with.

Find the simple steps and a couple of options for these beads on Parole de Pâte here.

Read More

Ripple Away

January 4, 2018
Posted in ,

For an easy but classic set of techniques that you might want to explore, just pick up your ripple blade. Most all of us have one. They come in those beginner pack of polymer blades so they are easy to acquire if you don’t have one. The effects you can create with them go from controlled pattern to random to sculptural texture.

I just pulled out a few that caught my eye today. The top one was posted by Libby Mills back in 2012. She used stacks and played around with manipulation and how to slice them, following instruction she got from Jody Bishel both at a retreat and through a project in the book Polymer Clay: Exploring New Techniques and New Materials. She really had too much fun as you can see on Libby’s blog post from back then.

I could not find attribution for the center image but I didn’t want to skip over the sculptural aspect of this handy blade. Cutting beads and stacked edges with this blade gives us quick and interesting textures. The ripple tends to lend a fun quality as well as the instant tactile quality so it’s not for all pieces but whimsical and graphic pieces might be something to try this on.

This last one was created by Nevenka Sabo some years back. I don’t have a date as the links are broken but you can see well enough what she did. Create a bulls-eye cane with a Skinner blend laid on a white sheet of clay and roll. Cut sideways and you have some wonderful veneers with an interesting patterned center swatch. Click here to get a more detailed view.

There are tons of tutorials online for using the ripple blade so if these tickle your fancy, do try a Google search or spend some time on the many Pinterest boards featuring techniques with this tool and then head off to the studio table with a new infusion of ideas.

Read More

Exploration in the New Year

January 2, 2018
Posted in ,

First of all …. a very happy New Year and all the best to you this coming year! I am very excited to welcome 2018 and see what it has in store for us all. 2017 was a bit rough for so many of us, personally and globally, within our community and without. Every year has its challenges, of course, but I like to greet the new year with optimism and enthusiasm because it does represent so many new possibilities.

New possibilities may be about looking forward but it can be helpful to look back in order to create new and exciting futures. I’ve dug up a few interesting techniques from the past in order to, hopefully, spark some new ideas and encourage you to find new ways to use older techniques.

Let me tie into some of last week’s subjects. If you didn’t see the post about the silkscreen stencils on Friday, do check that company out. That would provide you with new designs, pre-made or custom, to try a new approach with. Then try a little something different, using multiple colors and controlled placement. I believe that is what Kleio Tsaliki was doing with these gorgeous sheets she created back in 2015.  I am thinking she used stencils and pearlescent paints and, in the top two, taped off sections as she applied colors. Or maybe she is using a stencil sponge to control where the color goes, which would work for the more random placement seen in the bottom sheet.

It doesn’t matter that we don’t know how she did this as the ideas we are guessing at are quite worthy of a bit of exploration regardless. I have found some really cool, unintended effects when I have just been guessing at how other people have done the work. It just pushed me to think of new ways to approach familiar techniques.

A quick click on this link to her Flickr pages will show you the variety of sheets she created. And if you are not into guessing how she did it, she also has a tutorial on this stencil technique available in her Etsy shop.

Read More

Going Half Round

January 18, 2016
Posted in ,

Бижутерия своими руками мастер-клаThis week, I have pieces to share with you that have unexpected additions or changes. I think it is fantastic to mix things up, not only in our own world and work, but to step outside the expectations of what we think certain types of pieces should be. For instance, does a bead really have to be round? No, of course not. But should it at least be three-dimensionally symmetrical? Not really.

Katerina Sidorova has taken the round bead and literally reshaped it for this bracelet. The beads here were created by making perfectly round balls, cutting them in half, and adding thick cane slices on top that were carefully smoothed in to blend with the cut halves. The result is an off-balance half-round shape, or you might say it’s a ball half smashed, or you might call it acorn shaped even. What it is, though, is an unusual shape for a bead, which makes the gathering of the beautiful blue details quite intriguing. And really, the idea is pretty simple, but just that change makes us look twice because it does go beyond the expected round form.

Katerina has generously shared how she created these in this tutorial. She is the shop owner at Russia’s online polymer and jewelry supply shop KalinkaPolinka, which is also a great website full of articles, free tutorials, and links to other tutorials to explore.

Inspirational Challenge of the Day: Consider a form you regularly create and consider how you can change it to make it more interesting or intriguing. Sketch, cut, or sculpt your ideas.

___________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

   

PCA Nov 15 Blog   businesscard-3.5inx2in-h-front

___________________________________________

Read More

Original, Dimensional Mokume Texture

October 7, 2015
Posted in ,

Anna Anpilogova diy textureSo, I came across this great little idea that I had seen some time ago but never got around to trying. Although the impression method of creating mokume patterns is pretty accessible with manufactured stamps and texture sheets, it would be a grand thing if we had some options so those standard patterns and stamps aren’t the only ones we see out there. This is one easy way to create a unique pattern—three-dimensional paint!

Anna Anpilogova shows us an example of a pattern she created using glass liner paint. Her simple explanation for this easy but dramatic DIY texture sheet can be found on her Flickr page:

You need some transparent film and liner for glass/ceramics. Just put the film over the desired pattern and trace it with the liner. Let dry, and then repeat tracing one or two times to increase the depth of the texture. Works well for mokume gane technique, just don’t forget to sprinkle it with water before applying to clay, as it tends to stick.

Some paints you can try would include Pebeo’s Outliner, Jacquard’s Luminere 3D, DecoArts 3D Enamels or even some heavy-body acrylic paints and borrowing a narrow tip applicator from something else or putting it in a squeeze bottle.

Anna is a big texture artist. If you are looking for a texture inspiration, take a look at her collection of work on her Flickr photostream and LiveJournal pages.

 

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

     

     Print

Read More

A Magnetic Connection

June 12, 2015
Posted in ,

C4aOne of the tougher decisions I had to make when putting together the Summer 2015 issue was to cut part of what Helen Breil sent for her wonderful “Magnetic Design” technique tutorial. The article primarily focuses on the creation of pieces with interchangeable magnetic focal points using rare earth magnets, but she also generously added a few additional instructions, including how to create magnetic brooch clasps that work double-duty as a pendant bail, as well as being the basis for multi-pin pieces that can be set on clothing in different configurations. She had also included an easy option for creating a magnetic front closure, but she had sent so much great information that we simply couldn’t fit it all in. So here is a concise collage of the magnetic front clasp she created for us, and the photos that let you see how it is put together.

The quick run down is that you use cylindrical rare earth magnets, drill holes on each half of the clasp, ensuring the magnet positions will line up your two halves exactly where you want them to come together. Create holes just large enough to snugly fit the magnets and deep enough for them to sit flush with the edge of the clasp. (You can insert the magnet into the hole to see if fits and use another magnet to pull it out of the hole when it does go in flush as needed.) Apply cyanoacrylate gel glue to the magnets and place them back into the hole. Ensure the magnets are set in the ‘right’ direction–since magnets are directional, you don’t want them glued in leaving only ends that oppose each other, so snap the magnets together as they should be and apply the cyanoacrylate gel glue to one end, pressing it into its hole, and then grasp that side of the pendant, add glue to the still exposed magnet end and push it into the open hole. Release the magnets by sliding them apart and let the glue set. That’s it!

Helen is a wealth of information and fabulous ideas, not to mention a creator of many wonderful clay-centric products. Be sure to check out her website for her tutorials, books, silkscreens, and texture sheets, as well as take a peek or two at her Flickr photostream for more great ideas. And get your copy of the summer issue of The Polymer Arts for Helen’s entire brilliant article.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Read More
If you love these posts ...