Diving into Exploration

Flickr’s Dragonfly555 shows off impressions samples.

Do you feel like you have to make a finished piece or be working on a particular design when you sit down at your studio table? Sure, it feels good, and it’s very exciting to have a finished piece to show and share, but learning a craft is as much about exploration as is about creating finished work.

So, if you’re not giving yourself that exploratory time, let me give you some reasons to highly consider it. And if you do a bit of exploring already, maybe I can offer up some new ideas about ways to use and organize your exploratory bits that you might not have tried.

 

The Exploratory Reasoning

When you’re fairly new to a material, technique, form, or construction method, it is to your advantage to spend time just playing with it. This is especially true, I think, of texture, mark making, color mixing, new techniques, and new materials including new brands of a familiar material. Trying to make finished work before you are familiar with the technique or material can get frustrating, if not downright depressing. You can gain more success in the long run if you develop a better understanding of what it is that you’re working and hone your skills a bit before gambling your time, materials, and hopes on finished work.

It certainly can be tempting to just pick up something and see what you can make with it right out the gate. With a lot of home craft materials, polymer clay in particular, you can create a decent completed piece within a day of picking it up. However, the ease of these materials is a bit of a deception. They may be easy to get started with, but mastering them, even just a little, takes time and effort. Give yourself a gift of that time to get to know what you’re working with without the pressure of trying to finish something presentable.

 

Samples to Reference

Mica powders with sample chips

Probably the best way to explore new materials and techniques is to make small samples, ones you can keep and reference as you make decisions for future finished pieces. If the color of the sample is not relevant, you can just use scrap clay. If you use clay straight out of the package, you may also have an option to transform the samples into finished work. Let’s go over all these options.

(Although I’m going to talk specifically about polymer clay, if you work primarily in another material, consider an equivalent process. Consider how you can cut out or form small samples that can be saved as references. See if this clay focused process inspires you.)

For some orderly exploration, sheet your clay and then hand cut or punch cut the sheets into whatever shapes tickle your fancy. Then you can just go crazy with whatever you’re exploring. Use as many of these pieces as you like for each process you’re exploring. Keep the ones you are pleased with, etching with a needle tool or, after curing, writing on the back with permanent marker, what you made them with. Keep cured pieces in a baggie or punch holes in them before curing so you can string them on wire or chain, making them easy to flip through.

If you are playing with textures, mark making, or any kind of tooling on polymer clay, I would suggest sheeting three different thicknesses—the thickest setting, a medium setting, and the thinnest setting on your pasta machine. Then try out each of your experiments at least once on each of the three different thicknesses. Anything that impresses or otherwise moves around the clay will be affected differently by the clay thickness, sometimes subtly but sometimes quite dramatically.

Cure the samples you like, being sure to inscribe or write a note on the back indicating what thickness the clay sheet was along with what made the impression or marks.

If you’re color mixing, sheet the finished color, then punch out a decent sized shape, one that has enough room for you to write down your proportions for that color mix. For example, if you mix a deep rich purple by combining 6 parts cobalt, 3 parts magenta, and one part black, inscribe on the back:

6X blue

3X magenta

1X black

Also include a big initial for the brand of clay (P for Premo, F for Fimo, K for Kato, etc) since colors by the same name in one brand are usually nothing like those colors in another brand.

You can also note proportions visually by punching out a circle of clay, smaller than your mixed sample, from each of the colors you used in the mix. Cut out portions, like pie slices, from each color in proportion to how much was used in the mix to re-create a single circle showing how much of each color was used in the mix. Don’t forget to inscribe your initial for the brand of clay. See the image here for an approximate example of the purple mix above.

Adhere this combination pie to the mixed color shape, punch a hole in the sample, cure, and string on a chain or wire.

(If you are confused about how to figure out the parts aspect of the color mixing, just use a small cutter to punch your unmixed colors out of sheets of the same thickness. Each piece is a part. Use these punched bits of clay to make your mix, keeping track of how many pieces/parts you use to create the color you’re making.)

If you’re playing with a surface colorant, try it on both white clay and black clay or on clay colors you use quite often. It’s a rare colorant that doesn’t allow the clay base underneath to the show through, so trying it on black and white will give you an idea of how the colorant will appear on lighter versus darker colors, not just black and white.

I punch small-ish circles out of white and black sheets of clay, then I cut them in half and put a white half with a black half. I apply the colorant to these splits chips. After curing, I glue them to the colorant’s product container so my reference sample is right on the product. You can see here how well this works for those little mica powder containers, above. I keep them in a drawer with the samples facing up so I can quickly find the color I want.

The best part about all these samples is that while you’re designing a finished piece, you can pull them out and compare them side-by-side to see what works well together. You can also hold them up to a partially finished piece to see what you might want to add. Personally, I can’t imagine working without all my exploratory samples.

 

Turning Discovery into Works of Art

Just a few pendants and beads I made with extra texture samples by reforming and/or adding pin lace layers of clay. You can learn the pin lace technique in the February VAB here. The VAB PDFs are 40% right now too.

Now, for those of you who are anxious to produce something with your time at the studio table, you can take any samples you’re not going to save for reference and create with them. You can add additional layers, reshape, or attach embellishment to your extra samples to easily create pendants, earrings, or brooches. You can also use them for collages or mosaics.

Keep cured samples, even if you’re not going to use them for reference, for further experiments where you want to play with cured clay techniques or to test new glues or sealants. This way, not only is your time not wasted, neither are any of the materials you’re playing with.

 

Give Yourself Permission to Explore

Whatever your inclination, the big take-away here is that in-depth exploration can, and probably should, be a regular part of your creative process. Give yourself the permission and time to do this throughout your creative journey or career, not just when you’re starting out.

Keep in mind, not only does this kind of exploratory time hone your skills, your familiarity and confidence with the processes and techniques grow stronger and faster than they would if you tried to learn just through making finished work. This is because you are willing to take more chances with these scrap samples. They just don’t have the same stakes, right?

And, you know, taking chances with this exploratory sample work should eventually translate into taking bigger risks with your finished pieces. I think, when we take the big risks, that’s when we make the biggest leaps and create the most amazing work. Well, sometimes we make absolute disasters as well, but it’s all part of the process. You’re certainly less likely to have a disaster if you do a lot of exploration first.

Christi Friesen shares unusual and creative mark making in the March Virtual Art Box

So, if you have not let yourself just explore and play with the materials you work with, maybe, this week, you can either set some time aside or make all of your studio time exploration time. Making many of your mistakes in the exploratory phase and not always on completed pieces will make your creative time more efficient, less stressful, and more enjoyable.

 

Texture Hungry?

If you’re one of those who is looking for more ideas and direction on texture, don’t forget we have an entire issue of The Polymer Arts on texture, the Fall 2017 issue. Also check out the mark making focused edition of the Virtual Art Box from March of last year. All Virtual Art Box content that was previously members only is 40% off right now.

 

 

The Last of the March Giveaways

Our month of giveaways has ended, but all your wonderful comments have given me so many ideas for upcoming posts. I thank all of you who commented so very sincerely!

I have one last giveaway winner to announce. Valerie Hall is receiving the last batch of my giveaway Polyform clay. I was very excited about this. Valerie is a very active and giving soul who has been trying to teaching through the great clay shortage of 2020 in any way she can. So it’s fantastic to aid her with this clay package. Congrats Valerie!

This was so much fun. I will try to do this here and there as I receive samples or find opportunities to gather stuff for you. So stick around for more free stuff in the not-too-distant future!


 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…


 

Simply Stunning

Tanya Mayorova

Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.

I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.

With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.

Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.

A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.

 

Beads Beyond the Basic

Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.

Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.

Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.

 

Tanya doesn’t have a tutorial posted for this, but I can help you with that:

  1. Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
  2. Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
  3. Carefully blend the seam where the ends meet.
  4. If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
  5. Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
  6. You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.

Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.

 

The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.

I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.

Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.

 

Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.

These are created by Rebekah Payne who generously posted a tutorial here on how to make them.

 

A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..

 

You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.

 

The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!

Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.

 

Beads Away!

The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.

There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.

  • My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
  • Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
  • If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
  • Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
  • For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.

 

Holes

Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!

For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.

There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!

However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts

 

Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!

Hole-y Design

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Beauty in Old Clay

If you haven’t seen this technique, created about a decade ago by France’s Dominique Franceschi, you really have to try it. Like Monday’s post, this too came out of an accident, one many of us have probably experienced to some degree. It was from dry, crumbling clay, once again ruining our expectations. Well, Dominique took that experience and ran with it and what a beautiful texture arose from playing around with this stuff.

Basically, she extruded some older clay and it cracked all up and down the length of it. Instead of tossing it, she wrapped it around base beads, flattened and smoothed the clay, and ended up with these beautiful, organic looking textures. Wonderful stuff.

Her full technique was shared and translated on Parole de Pâte way back in 2006. But just because it’s an older technique doesn’t mean that it can’t be new or newly played with. Try it out and maybe you’ll even have some pleasantly unexpected outcomes by using it slightly differently such as laying it on a sheet to create surface designs that can be made into jewelry or wrapped around boxes. Or what would these cracked snakes look like and how would you use them if you tried just smoothing out the snakes alone? In any case, it would certainly be fun to play with.

Find the simple steps and a couple of options for these beads on Parole de Pâte here.

Ripple Away

For an easy but classic set of techniques that you might want to explore, just pick up your ripple blade. Most all of us have one. They come in those beginner pack of polymer blades so they are easy to acquire if you don’t have one. The effects you can create with them go from controlled pattern to random to sculptural texture.

I just pulled out a few that caught my eye today. The top one was posted by Libby Mills back in 2012. She used stacks and played around with manipulation and how to slice them, following instruction she got from Jody Bishel both at a retreat and through a project in the book Polymer Clay: Exploring New Techniques and New Materials. She really had too much fun as you can see on Libby’s blog post from back then.

I could not find attribution for the center image but I didn’t want to skip over the sculptural aspect of this handy blade. Cutting beads and stacked edges with this blade gives us quick and interesting textures. The ripple tends to lend a fun quality as well as the instant tactile quality so it’s not for all pieces but whimsical and graphic pieces might be something to try this on.

This last one was created by Nevenka Sabo some years back. I don’t have a date as the links are broken but you can see well enough what she did. Create a bulls-eye cane with a Skinner blend laid on a white sheet of clay and roll. Cut sideways and you have some wonderful veneers with an interesting patterned center swatch. Click here to get a more detailed view.

There are tons of tutorials online for using the ripple blade so if these tickle your fancy, do try a Google search or spend some time on the many Pinterest boards featuring techniques with this tool and then head off to the studio table with a new infusion of ideas.

Exploration in the New Year

First of all …. a very happy New Year and all the best to you this coming year! I am very excited to welcome 2018 and see what it has in store for us all. 2017 was a bit rough for so many of us, personally and globally, within our community and without. Every year has its challenges, of course, but I like to greet the new year with optimism and enthusiasm because it does represent so many new possibilities.

New possibilities may be about looking forward but it can be helpful to look back in order to create new and exciting futures. I’ve dug up a few interesting techniques from the past in order to, hopefully, spark some new ideas and encourage you to find new ways to use older techniques.

Let me tie into some of last week’s subjects. If you didn’t see the post about the silkscreen stencils on Friday, do check that company out. That would provide you with new designs, pre-made or custom, to try a new approach with. Then try a little something different, using multiple colors and controlled placement. I believe that is what Kleio Tsaliki was doing with these gorgeous sheets she created back in 2015.  I am thinking she used stencils and pearlescent paints and, in the top two, taped off sections as she applied colors. Or maybe she is using a stencil sponge to control where the color goes, which would work for the more random placement seen in the bottom sheet.

It doesn’t matter that we don’t know how she did this as the ideas we are guessing at are quite worthy of a bit of exploration regardless. I have found some really cool, unintended effects when I have just been guessing at how other people have done the work. It just pushed me to think of new ways to approach familiar techniques.

A quick click on this link to her Flickr pages will show you the variety of sheets she created. And if you are not into guessing how she did it, she also has a tutorial on this stencil technique available in her Etsy shop.

Going Half Round

Бижутерия своими руками мастер-клаThis week, I have pieces to share with you that have unexpected additions or changes. I think it is fantastic to mix things up, not only in our own world and work, but to step outside the expectations of what we think certain types of pieces should be. For instance, does a bead really have to be round? No, of course not. But should it at least be three-dimensionally symmetrical? Not really.

Katerina Sidorova has taken the round bead and literally reshaped it for this bracelet. The beads here were created by making perfectly round balls, cutting them in half, and adding thick cane slices on top that were carefully smoothed in to blend with the cut halves. The result is an off-balance half-round shape, or you might say it’s a ball half smashed, or you might call it acorn shaped even. What it is, though, is an unusual shape for a bead, which makes the gathering of the beautiful blue details quite intriguing. And really, the idea is pretty simple, but just that change makes us look twice because it does go beyond the expected round form.

Katerina has generously shared how she created these in this tutorial. She is the shop owner at Russia’s online polymer and jewelry supply shop KalinkaPolinka, which is also a great website full of articles, free tutorials, and links to other tutorials to explore.

Inspirational Challenge of the Day: Consider a form you regularly create and consider how you can change it to make it more interesting or intriguing. Sketch, cut, or sculpt your ideas.

___________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

   

PCA Nov 15 Blog   businesscard-3.5inx2in-h-front

___________________________________________

Original, Dimensional Mokume Texture

Anna Anpilogova diy textureSo, I came across this great little idea that I had seen some time ago but never got around to trying. Although the impression method of creating mokume patterns is pretty accessible with manufactured stamps and texture sheets, it would be a grand thing if we had some options so those standard patterns and stamps aren’t the only ones we see out there. This is one easy way to create a unique pattern—three-dimensional paint!

Anna Anpilogova shows us an example of a pattern she created using glass liner paint. Her simple explanation for this easy but dramatic DIY texture sheet can be found on her Flickr page:

You need some transparent film and liner for glass/ceramics. Just put the film over the desired pattern and trace it with the liner. Let dry, and then repeat tracing one or two times to increase the depth of the texture. Works well for mokume gane technique, just don’t forget to sprinkle it with water before applying to clay, as it tends to stick.

Some paints you can try would include Pebeo’s Outliner, Jacquard’s Luminere 3D, DecoArts 3D Enamels or even some heavy-body acrylic paints and borrowing a narrow tip applicator from something else or putting it in a squeeze bottle.

Anna is a big texture artist. If you are looking for a texture inspiration, take a look at her collection of work on her Flickr photostream and LiveJournal pages.

 

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

     

     Print

A Magnetic Connection

C4aOne of the tougher decisions I had to make when putting together the Summer 2015 issue was to cut part of what Helen Breil sent for her wonderful “Magnetic Design” technique tutorial. The article primarily focuses on the creation of pieces with interchangeable magnetic focal points using rare earth magnets, but she also generously added a few additional instructions, including how to create magnetic brooch clasps that work double-duty as a pendant bail, as well as being the basis for multi-pin pieces that can be set on clothing in different configurations. She had also included an easy option for creating a magnetic front closure, but she had sent so much great information that we simply couldn’t fit it all in. So here is a concise collage of the magnetic front clasp she created for us, and the photos that let you see how it is put together.

The quick run down is that you use cylindrical rare earth magnets, drill holes on each half of the clasp, ensuring the magnet positions will line up your two halves exactly where you want them to come together. Create holes just large enough to snugly fit the magnets and deep enough for them to sit flush with the edge of the clasp. (You can insert the magnet into the hole to see if fits and use another magnet to pull it out of the hole when it does go in flush as needed.) Apply cyanoacrylate gel glue to the magnets and place them back into the hole. Ensure the magnets are set in the ‘right’ direction–since magnets are directional, you don’t want them glued in leaving only ends that oppose each other, so snap the magnets together as they should be and apply the cyanoacrylate gel glue to one end, pressing it into its hole, and then grasp that side of the pendant, add glue to the still exposed magnet end and push it into the open hole. Release the magnets by sliding them apart and let the glue set. That’s it!

Helen is a wealth of information and fabulous ideas, not to mention a creator of many wonderful clay-centric products. Be sure to check out her website for her tutorials, books, silkscreens, and texture sheets, as well as take a peek or two at her Flickr photostream for more great ideas. And get your copy of the summer issue of The Polymer Arts for Helen’s entire brilliant article.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Creating Constellations

May 18, 2015
Posted in ,

caprilliciousI am neck deep in some last minute tweaks for the next issue, so I’m giving you an assignment while my brain is otherwise occupied. Well, not an assignment, but it looks like a fun little tutorial to try out in a spare moment.

If you tried out the pastels tutorial in the Spring issue, then you already have what you need to try pastels in a different way. This tutorial is about dusting the pastels onto pieces. It was created by Neena of Caprilicious JewelleryI like the scattered texture and her bold colors. Although the tutorial starts out with just flat disks, I thought this simple bite into those disks that created a moon shape along with the bright green dangles was a nice touch; it has contrast and movement and is just fun. Nothing wrong with fun. I’m looking forward to having some time to do a little something fun later this week after the issue is safely and squarely in those printing machines.

See the tutorial on Neena’s website here and don’t forget to push the idea after you try it out. Try completely different forms like round or tube beads, work it into part of another piece, mix it with other surface treatments … just have fun exploring. You never know what will pop up.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

 

     TPA_McGuire_blog ad    sfxpaad-diffuse

Read More

Graphical Pattern Play

April 18, 2015
Posted in ,

103316258Well, has this week’s cool patterns got you hankering to try a some new dramatic patterns yourself? Here, I found a great online tutorial that uses the drama of graphical black patterns edged by white to pump up the color and pattern of scrap canes. It’s a beautifully simple technique brought to us by Pinklily of France. I decided to show you just the resultant sheets here and hope you’ll go see what can be made from them on her blog post. Because the options are too fun to miss I thought you might just get curious and click through.

The instructions on here are in French and can’t be copied into Google translate, but I think the images are pretty self-explanatory. Although she uses canes for the background, you could really use any kind of pattern from marbling to leftover mokume to Stroppel canes. You could even keep it simple with a solid or Skinner blend background. The general effect will be the same.

Pinklily is pretty generous with her tutorials on her blog, so if you like this, take some time to wander about and see what other fund stuff she might have for you.

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Read More

Repeat a Space

March 7, 2015
Posted in ,

0_76019_2b054a6d_XL

I thought I’d look for some tutorials for you to play with this weekend that would accommodate some play with repetition. In that search, I found this simple, but charming, polymer bead spacer  tutorial. We really didn’t talk about the repetition of strung beads, but I figured that would be a pretty obvious use of repetition. However, there are many ways to add variation to a string of beads. Different colors, sizes, shapes and textures is one way. Adding interesting spacers is another fantastic way.

Now, here is where I could use some help. I can find this tutorial on many a Pinterest board and numerous sites that gather tutorials, but I cannot pinpoint the author. And yes, there’s text on there but it does not seem to the English alphabet, so I’m at a loss. And with this tutorial so widely spread on English and non-English sites alike, it seems this person should get a little more obvious credit. So, if anyone has a clue, I’d love to hear from you. You can comment or reply to your email version of the blog post, and I’ll get it.

Here is where I originally found this tutorial if anyone wants to try to sleuth it out: http://claybooks.diary.ru/p172024294.htm?oam

In the meantime, how about making creative spacers this weekend?  That could be a particularly fun, little project, especially for you snow bound folks!

Update: Thanks to Anna Anpilogova, we have our mystery solved.

The tutorial is by a Russian clayer Anna Mashkova. “Here is the link to original post in her blog … http://alica19.livejournal.com/17265.html” Thank you to both Annas!

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.

  tpa-blog-125x125-2015 LP-PA-FoilsDf0215   ice cream ad  TPA_McGuire_blog ad;

Read More

Salted Old Beads

January 24, 2015
Posted in ,

karenia

 

Has this week’s selection of faux ancient and old art got you thinking about ways to create more of that look in your own work? The techniques used to create these looks can be applied to a variety of forms and even be reinvented using brighter colors and not-so-old-looking contrasting textures and finishes. Searching for something fun and easy to get you started on that track, if you haven’t already, I found this delightfully easy and highly textural tutorial for you.

The blog post with this tutorial is originally in Russian, but I’ll send you to the the translated to English version here. It’s really pretty well laid out in the photos, and the steps are simple but with a beautiful and sophisticated result, as can be seen in the necklace Russia’s Katerina Sidorova designed from her technique. The layering of the clay is an ingenious way of adding that additional color for the aged look since it will show on the ends and wherever the salt digs through the very thin top layer to the colors underneath. So no additional painting or other color is needed. Pretty neat.

Katerina is the shop owner at Russia’s online polymer and jewelry supply shop, KalinkaPolinka, and for what I think must be wholesale or at least bulk-buying, Kalinka-Pro. If you are on that side of the globe, it is a shop well worth checking out. But for everyone everywhere, she has a great page on her website of articles, free tutorials and links to other tutorials that would be a great starting point for other new avenues to explore.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.

businesscard-3.5inx2in-h-front    PolymerArts Kaleidoscope     sfxpaad

Read More

For Love of Landscape

December 27, 2014
Posted in ,

Joelle tuto-copie-1

To end my week of favorite things, I’d like to share a nice little tutorial on a landscape surface treatment. I am rather partial to landscapes as they can represent so much. They can be calming, dreamy and make us feel small in the enormity of open land before us. But mostly, for me, landscapes feel like the beginning of a story. Maybe I’ve just watched too many movies that have opened on a wide open landscape, but I do like to think about seeing all the possibilities in that openness.

This French artist, who goes only by the name Joelle, is a crafter of many materials but seems strongly drawn to textures and organic color palettes, both of which you can see in this tutorial of hers. I enjoy the mix of additional mediums to get her textures and create little focal points. Switch up the colors to your own preferred palettes, and create a landscape that could hold your own story.

You’ll find the step-by-step tutorial on Joelle’s blog, along with the many other creative projects she gets herself into.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.

businesscard-3.5inx2in-h-front      TPA Blog Newsletter Ad  ShadesofClay 1014 v2  lpedit  

Read More

Clean Mokume

November 29, 2014
Posted in

SONY DSCOn Polyform’s website, there are numerous free lessons. If you have admired Melanie Muir’s clean mokume technique, you can get the basics and create your own from this great little tutorial on Polyform’s website. It’s nice to see the tutorial emphasize the importance of color contrast–light and dark, but there is also bright and dull, warm and cool and picking from opposite ends of the color spectrum.  All of these will give your color palette some level of drama. However, there is nothing at all wrong with choosing analogous colors, colors with similar saturation or value or anything else. It will create a different feel, and the less contrast, the less visual pop and drama you will see. But, we’re not always after that, are we?

So, why not choose a color palette that fits your mood, an outfit or reminds you of a great time or place and try Melanie’s approach? There are some great little tips in this lesson, which makes it worth at least a quick read for anyone into polymer surface treatments. And the resulting sheets or pendants could really get you ahead on creating for your gift giving list!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

businesscard-3.5inx2in-h-front      TPA Blog Newsletter Ad  ShadesofClay 1014 v2  lpedit  

Read More

Of Triangles and Fans

July 12, 2014
Posted in , ,

Maybe you’ve already saw this in our newsletter a couple weeks ago, but many of you probably did not. And it certainly fits the current theme,  for what are fans, but dimensional triangles? I know, I’ve been pushing the theme a bit hard this week, but it was fun, wasn’t it? Now it’s time for you to have more fun with the ideas we talked about this weekend. If you need a push, I would highly suggest grabbing a copy of Helen Breil’s new digital book, Fan Fold Designs. Just look at the cool designs you can learn to create just on the cover alone.

062314 helen fold book

 

As Helen explains, “This design-based book is the result of my exploration of the design possibilities of folding clay.  I was inspired by the paper folding and origami arts as well as the fabric arts of silk Shibori scarves and ribbons. The strong design element of the fold lines seem to naturally invoke a bold and dramatic look.” Agreed. I already have my copy, and as busy as I am, I just couldn’t help but stop in the middle of my day when I got it in order to try out a few things. These techniques are easy and fun and have so many possibilities.

And speaking of our newsletter, if you don’t already get it, you can get by signing up on our website on the left hand side of our main page. It comes out just twice a month, but includes news on classes, products, events, and conversations as well as reporting on what’s happening here for The Polymer Arts magazine. Every issue also includes useful tips and lists the most popular blog items seen the last couple weeks with additional insights and words from our readers. Just another way to get your polymer fix!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P2 CoverFnl-blog   Blog2 -2014-02Feb-5   Damask Ad

Read More

Easy Knitted Polymer

April 20, 2014
Posted in ,

This Canadian artist, Shireen Nadir, is passionate about arts and crafts and admits that she is just learning about polymer.  Because she likes working in textiles, especially knitting and weaving, she decided to try a knitting technique with the polymer bangle bracelet shown here. She gives a complete tutorial on her blog “The Blue Brick” for making this bracelet, as well as tutorials on other projects.

3v8a3604

Shireen works as a photographer, and if you would like to know more about her, check out her website. Hope you had a lovely Easter or Spring Holiday with your family and friends.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   Millefiori eggs   14P1 cover Fnl

Read More

Build a Basic Ring

April 13, 2014
Posted in ,

Now that we’ve been looking at rings all week, are you not excited to try your hand at this form or expand on what you’ve done in the past with rings? There are a number of online sources including classes at Craft Art Edu or the expansive article on creating rings in the Winter 2012 issue of The Polymer Arts as well as a number of online tutorials. The article in our 2012 issue has easy instructions by Donna Greenberg on how to make a polymer band for a ring base but if you’d prefer a metal wire band, check out this straight forward tutorial by Elena Samsonova, a Russian born artist living in Connecticut in the US.

3703014844_9806c744fd_o

To get the first half of this tutorial showing you how to build the wire wrapped ring base, go to Elena’s Flickr page and then peruse other lovely work and ideas of hers while there.  For more of her tutorials as well as more of her work, visit Elena’s website as well.

 

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   Millefiori eggs   14P1 cover Fnl      

Read More
If you love these posts ...