Questioning Focus
July 7, 2019
Inspirational Art
“Fabiclay” brooch by Klio Tsaliki
Are you one of those people who finds an interesting path and goes down its until you find the end or do you like to wander about? I know that’s kind of a vague question, but you could apply it as a metaphor to goals in your life, the path of your career, or the way you create your artwork. I recently read some excerpts by Thomas Edison on the importance of keeping focused. He said, “The one prudence in life is concentration, the one evil is dissipation.” I don’t know if I wholly agree with that or, at least, I think it’s not so readily summed up in one tidy sentence.
I bet you can come up with at least a couple of artists off the top of your head who have come up with a treatment in polymer clay that they create with almost exclusively and have become quite masterful at it. But I think you come up with quite a few artists who consistently try different things, exploring, growing, and changing their style and focus on the artwork. Would you say that the person who focuses is probably doing better work than the person who is constantly exploring?
Perhaps it’s because we are talking about art that I can so readily dismiss Edison’s comment. I have always thought that, for most artists, art is about the exploration. I think if you find one technique and worked very hard to perfect it, you might get overly comfortable because you will more likely succeed with each successive piece as you hone your skill. And yes, I am presenting that as a possible problem. I am a strong believer in the value of messing up and creating pieces that “fail” on some level. It’s those experiences that really teach us and allow us to grow as artists. However, I do think that masterful artists who stick with one approach do, especially in their mind, make a lot of mistakes and have numerous pieces that failed or fell short of the artist’s expectations for every piece of work we would deem a masterpiece.
The bottom line is, I think whatever journey your imagination and curiosity leads you on is the right path to follow with your creative work. Don’t fight it if you like to stick with one technique and refine it over and over or if you get easily bored once you feel you’ve mastered something enough to understand it and want to move on to the next challenge. The journey of our creative process is as individual and unique as our own artwork.
Let’s look at a few examples of people on both sides of this coin – those dedicated to a primary technique and those that constantly change their focus. Then you can decide for yourself if Edison had a point or not.
Single Minded Tangents
There are so many artists that come to mind that focus on a single technique or process and have mastered it to a mind-blowing extent. Elise Winters is one of the first that comes to mind when it comes to technique. This surface treatment was her signature and her legacy and no one, that I’ve seen, has yet matched her skill with it.
When it comes to form, I don’t think anyone else in the polymer community has made more of the same form than Ron Lehocky with his hearts. But here’s an example of staying focused on one thing while exploring just about everything else you can. He’s made tens of thousands of hearts and no two are the same. Here are examples of the variations he came up with from a single Skinner blend.
One of the most masterful and single-minded people of process would have to be Jon Stuart Anderson with his cane covered animals and functional objects. Although caning is his focus as far as technique, he is constantly exploring pattern and how it affects the form. It’s a subtle exploration but if you look back through his work you’ll see how the application of pattern has changed over the years and how he is constantly exploring new forms to apply them to, working on how the new forms will show off the canes or how the canes will accentuate the forms.
I love this bowl below. It shows more “quiet space” with those swaths of black to red canes, than I think I’ve ever seen in his work before. The relatively unpatterned area so dramatically contrasts the complex canes designs but you can take in the individual cane and pattern placement more readily because the eye has a place to rest, giving you a moment to rest and to process more of what you’re seeing
This whole subject matter recalls to me a conversation Rosanna Faillace and I had with Melanie Muir in Rome last year. We were talking about people who stick with one technique and don’t branch out and Melanie, seeming to think it might be a negative thing, said “That’s me. I’m a one trick pony.” But of course, she’s not. She loves her inlaid mokume gane veneers, but she is constantly exploring construction and different forms on which to present these, resulting in pieces like this beautiful bracelet.
Frenetically Fabulous
I myself am of the exploratory variety of artists. I do wish I had a little more focus and could spend more time on any single technique, form, or process, but the thing is, my curiosity about what else I could do is a stronger driving force, so I go with that. There are a LOT of us artistic explorers in polymer art as polymer just cries out to be explored.
When it comes to an exploratory approach in polymer, Debbie Crothers is the first person who comes to mind. You can see her gorgeous acrylic on polymer beads on the front of the upcoming issue of The Polymer Studio. Her penchant for exploration is why she is writing the “Mix it Up” articles in the magazine. She always has something she’s playing around with and she does love to share. She does occasionally show the results of both her good and not so successful explorations, which I love because it demonstrates her willingness to try, to make mistakes, and to do the work over and over again until she has mastered it. It is highly unlikely that Debbie would have gotten the results she got in these beads below if she didn’t go through a lot of trial and error first. The final results are well worth the exploration!
Another person I’ve been following for years is Klio Tsaliki. She’ll try almost anything and, in the process, comes up with some great techniques and approaches. Some attempts come out better than others, but I love that she shares it all, or at least enough for us to see that she is not afraid to try anything that interests her. I find that very inspiring. A couple of years ago she was playing with metallic silkscreen and the possible fabric-like quality of polymer, as you can see in the opening photo of this post. More recently, she’s played with translucent clay and LED lights, as seen below.
Klio’s newest work has been in the up and coming new clay from Fimo, “Leather Effect”. Once cured, this clay is supposed to be very much like leather. You can see here on the Fimo website that it is very pliable and can be cut and even stitched. I don’t know about you, but I have never been so excited about a new line of polymer clay! It’s not available in the US yet, and I don’t know how widely distributed it is in Europe, but there is supposed to be news about that soon and, trust me, when it is available, I’m going to be playing with it quite a bit as leather was one of my first materials I made jewelry from. You can go to Klio’s Flickr photostream to see what she’s been doing with it.
Another name for exploration is pioneering. Pioneers need to explore their subject extensively to find those new and intriguing aspects that lead the rest of us to their fresh finds. In general, you’ll find that most of the folks we identify as polymer pioneers were and are highly exploratory. Just look at what Kathleen Dustin has done throughout her career. From ornate purses to translucent layered brooches to reinterpretations of textile patterns such as with these new brooches below, you never really know what Kathleen will be working on next and yet, all her work is masterfully constructed and impeccably finished. I think her exploration keeps her work fresh for us and, most especially, for her and her passion for her work.
Focus on Yourself
So, as you see, there are many approaches to the creative process, all of which have value and result in beautiful, emotive, and inspiring work. So, no, I don’t think focus and concentration on one technique, form, or even material, is necessary but I do think keeping a sharp focus on the overriding creative goal – to make fulfilling artwork, financially supportive artwork, satiating your curiosity, or whatever the important creative motivation is for you – is something to keep a watchful eye on.
Speaking of focus … The construction on my house is in the finishing stages now. That hasn’t helped me with my focus on getting the next issue out, neither has my tendinitis and back issue which was such a huge problem last year. The thing is, in the last year, I have not really had enough time off to completely heal and am having issues again. I’m pretty sure I can get this issue to the printer in time to have it out by the end of the month but I’m probably going to have a heart-to-heart with my doctor on what I really need to do to get this healed and am working out a bit of time off later this month. This is one area where keeping focus would be very helpful!
I will keep you apprised of any shakeups in production if you are a subscriber to The Polymer Studio so just stay tuned here. And next week maybe I can get you pictures of the house for those of you who are curious. Everything’s under plastic wrap right now as they finish plastering and painting. But it’s horribly exciting seeing it come together!
So, I will leave you with these thoughts on focus and exploration. I hope it brings you some interesting insights for your own process and work. Have a fabulous week!
Simply Stunning
May 19, 2019
Inspirational Art, Technique tutorials, The Polymer Arts magazine news
Tanya Mayorova
Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.
I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.
With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.
Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.
A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.
Beads Beyond the Basic
Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.
Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.
Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.
Tanya doesn’t have a tutorial posted for this, but I can help you with that:
- Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
- Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
- Carefully blend the seam where the ends meet.
- If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
- Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
- You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.
Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.
The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.
I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.
Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.
Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.
These are created by Rebekah Payne who generously posted a tutorial here on how to make them.
A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..
You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.
The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!
Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.
Beads Away!
The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.
There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.
- My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
- Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
- If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
- Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
- For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.
Holes
Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!
For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.
There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!
However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts
Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!
Splitting the Difference
April 21, 2019
Inspirational Art
Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)
So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.
I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!
So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?
Splitting the Canvas
Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.
For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.
Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)
Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.
This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.
And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.
Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.
You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.
Splitting up is Not Hard to Do
If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!
Here is a simple series of steps you can try right now … A Cane Split Canvas:
- Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
- Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
- Burnish the canes into the clay sheet so the surface is smooth.
- Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
- Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
- Once you find the section you like, cover it with plastic wrap and cut with your cutter.
- Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.
Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.
You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.
Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!
Now for the Great Tile Adventure
Story time! For those entertained by the little dramas of my little life.
So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!
Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.
So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!
Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!
I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!
So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.
Mixing and Mingling, New Cover, & 33% off Back issues
March 24, 2019
Inspirational Art, Polymer community news, Tips and Tricks
We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.
We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.
All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.
(Be sure to scroll down to the last section for the 33% off sale stuff.)
A Fine Mix-up
So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.
One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.
Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!
So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.
Mixed Directions
Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.
This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.
Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.
With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.
The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.
Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.
Putting Together Your Own Mixer
This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.
You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.
In fact, let’s have a sale!
Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.
And … I’m Off!
I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up. But talk about mixing it up!
So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!
The Weekly Polymer Arts … ?
January 20, 2019
Inspirational Art, Polymer community news
Well hello there! Surprised to see me on a Sunday? Well, I am here because I am trying something different. To start with, you may have noticed that blog posts were missing this past week. My apologies for that. Suffice it to say that my system, and life in general, made me take a break and so it was not until this weekend that I was able to put something together for you.
The funny thing is, I had already been looking at changing the frequency of the blog. We only have so many minutes in the day for all the fun stuff that comes our way and its more likely that we’ll set aside the stuff seen regularly than the rarer offerings. I’ve decided that I’d like this blog to be one of the rarer offerings, making a tiny contribution to the de-cluttering of your email inbox or RSS feed and giving me a chance to put together some juicier posts for you.
So, how does once a week sound? On a weekly post, I can share a couple of pieces of fabulous art along with polymer relevant news and fun takeaways like tips, tutorials links, sales, and discounts from polymer retailers. And how does this Sunday arrival feel? Cynthia already provides us a jumpstart to creativity on Saturday with Studio Mojo, and the weekdays seem a bit overburdened with news and emails and so I propose being a part of your Sunday, giving you a bit of eye candy, inspiring ideas and useful news to start the day or wrap up the weekend. And if the blog comes to you as an email at work, well, it will be there waiting to brighten up your Monday morning.
So let’s get rolling.
Some news first, since it relates to the beautiful mokume you see here … The first issue of The Polymer Studio was released yesterday, Saturday the 19th, and already the response is a glorious hurrah! Whew! The first of anything is always a bit nerve-wracking to put out but feedback has been nothing but glowing so far. If you were expecting to get a digital edition, it went out at the crack of dawn East coast time so check your inbox (and if it’s not there, check your spam folder or write us). Print editions went out in the mail Friday so they are on their way as well.
If you haven’t subscribed or ordered a copy yet, do it soon so you’re not missing out on some really wonderful tutorial projects including this “Kitchen Sink” mokume technique from Julie Picarello. You get the step-by-step on how to make the brooch/pendant you see here as well as how to create the “dropout” pieces you see surrounding it, from the same mokume blocks. Working with the translucent layers to get this intricate mokume is easier than you might think and it’s just too much fun seeing what comes out in your slices.
So, if you haven’t gotten your copy ordered or started your subscription already, you can do so on our website at www.tenthmusearts.com.
I have also been sent a special offer from Helen Breil. She just released a new techniques video class, Six Exceptional Textures, and you can get it now for 15% off! If you have not yet had the pleasure of creating alongside Helen in one of her tutorial books or videos, you do need to treat yourself. She divulges a wealth of tips and ideas in crystal clear and highly detailed instruction. This video class includes step-by-steps, ideas and inspiration for making your own unique handcrafted one-of-a-kind texture sheets in 9 packed videos. Click here to get it. The discount is good through January 31st.
Okay, that is enough news and fun opportunities for this surprise Sunday post. I do have exciting plans for this once a week format so be sure to open it up next week and see what the regular postings will be like going forward. If you want to be sure you get all our news and publication announcements, sign up for our twice monthly newsletter as well. In the meantime, enjoy all the creative things you’ll be trying out when you get your new issue of The Polymer Studio!
Memories for a Lifetime
August 25, 2017
Inspirational Art, Polymer community news
I know I showed you a bit of the sample “Into the Forest” installation last week, but I didn’t get in this mosaic created by Julie Eakes for the exhibition that will be installed in November. I think Julie gets the prize for the most intense and biggest piece to go into the installation. I uploaded a fairly large image of this so if you click on the photo, it should open up in a browser window and you can zoom in to see all the individual canes that make up the idyllic scene.
I wish you could zoom in on the screens you see here in the main assembly room as Ellen Prophater presented her talk on mokume gane. Oh, the secrets and the great tips and tricks she gave away during this talk! This kind of thing was happening all over and made the price of this event well worth it on that basis alone. The friendships and conversations, however, they make it priceless.
If you didn’t get to make Synergy and haven’t been to any major events lately or ever, keep them in mind. Save up your pennies and plan to get that time off from work for the next big event you can possibly work into your schedule. They are each an experience you’ll keep with you all life long.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Lines that Lead to Contrast
April 13, 2016
Inspirational Art
Lines are largely directional elements. We see a line and our eyes run along its path to see where it will go or where it has been. Combining lines that go in various directions will have us glancing over and back, jumping from one to the other as we try to follow them all. Our busy eyes are what make us feel that the lines are energetic. Energy can be good if that is what you are after, but unless you want to leave the viewer feeling ungrounded, you might want to have a place the eye can rest.
In this set of earrings by Lela Todua, you get that moment of rest in the strip of textured clay down the center. You also get this kind of mirror image of the criss-cross lines on one side being mimicked by the lines of changing color in the mokume gane surface on the other. Although not really the same kind of lines, the type of patterning and direction of lines are close enough that our minds see a likeness. It helps ground the two otherwise contrasting halves in a subtle relationship alongside their physical kinship being the same mirrored shapes connected to the same long central bar. The result is that our eye jumps from side to side, with a quiet moment we can take in between on that dividing bar. The dividing bar is actually a line as well, but she adds these simple dots at the end that keep our eye from sliding off and so our glance returns to trying to take in the broader surfaces. It gives us a sense of a full and complex composition in a small amount of space.
Lines and contrast seem to be the staple of Lela’s work as you can see by what she has to offer in her well stocked Etsy shop.
Inspirational Challenge of the Day: Find various styles of lines in everyday or natural items and find two that you see any kind of relationship between. Use these as inspiration for creating contrasting textures for a new piece. Alternately, create multiple textures with lines in a preferred set of materials and techniques, ones that develop random patterns (mokume, marbling, scratches, splashes of paint or ink, etc.), then find patches of texture that work together because of a suggested relationship your eye finds. Create a piece from them.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Hidden Patterns in the Newly Released Winter 2015 Issue – Hidden
November 23, 2015
Inspirational Art
The Winter issue of The Polymer Arts was released yesterday, to much fanfare and much relief from myself and the crew. Thank you so much for the many kind comments and compliments you’ve already sent in. It’s always great to know we’ve done well for you. Digital access was sent to everyone who subscribed or pre-ordered prior to yesterday and all the print issues are in the mail or will be as of this afternoon.
If you don’t see the digital issue you expected in your inbox, check your spam folder, and if it’s not there, write Kat at connect@thepolymerarts.com and she will look into it. If you don’t have your copy ordered or an active subscription you can do so on our website here.
I was so thrilled to have the genius of Ellen Prophater in this issue. She doesn’t post her work online, which I keep forgetting, but I’ve had the fortune of getting to see a lot of her work, both finished and in progress, at Creative Journey Studios and at events we’ve both attended, so it feels familiar to me. I thought I’d share a little Ellen that I own today while we wrap up things over here.
This is Ellen’s mokume, but it’s a Ron Lehocky heart pin (like you couldn’t guess that!) and the only reason it’s available is because it happens to be in my collection, a kindly gift from Ron. This is an example of my favorite of Ellen’s mokume methods where she uses embossing powder to create a beautiful granite-like look. She has so, so many methods and combinations for mokume, though. And we are such lucky kids that she shared nearly two dozen of her ideas in the Variations in Mokume article in the new issue. It’s not a step-by-step, but after the three sections that precede it – important secrets to great mokume, a very detailed tutorial by Angela Barenholtz on creating contour line mokume (sometimes referred to as impression mokume), and the new wild and twisted mokume Anke Humpert created a tutorial for – you’ll pretty much be ready to venture out on your own and try Ellen’s methods by recipe.
If you aren’t familiar with Ellen’s biggest creation, Creative Journey Studios, which she runs with the very kindly Sue Sutherland, do go over and take a look at all they do and have for you. They are a polymer supplier, but they also have one of the largest retail collections of filigree findings, and they are an absolute must as a place to visit on any polymer person’s bucket list as the studios house the most extensive retrospective collection of polymer art in the world. It’s amazing. If you are ever anywhere near Buford, Georgia (just north of Atlanta), you have to go there. It will knock your socks off. Or, you can make it a destination … they also do workshops all year long with some of the biggest names in the community, so take a look at their schedule and start planning!
___________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
___________________________________________
Polymer Color Recipes in an App? Why, Yes!
October 9, 2015
Inspirational Art, Polymer community news
So I spent my day at Sandy Camp in San Diego with a wonderfully enthusiastic group. I taught a mokume gane workshop with my little clayers coming up with some gorgeous results. However, I was too busy chatting and answering questions to direct my in-room photographer (thanks Mrs. Friesen!) to get some close up shots of the really wonderful color combinations and patterns that filled the tables. But what I did get, as did the rest of the lucky attendees, was a first look at a great new app created by our community’s own Nancy Ulrich. It may not seem like digital apps would have a place in hands-on craft, but this one was created just for clayers like you and me. Especially if you like color.
Well, that’s a silly thing to say. Who here doesn’t like color? But who here dreads trying to work up a color palette then figure out the color recipe for each color? If you raised a virtual hand in response to both those questions, then the ColorMixr app is going to be your new best friend! This is a purely polymer-clay-centric, color-picking, and palette-creating app. It was just released last night–it had just gone live in the Google Store hours before the demo I saw and the first Apple downloads happened by people in the room as Nancy presented it.
Here’s how it works: You take a photo, upload an image, or pick something you find online and feed it into the app . The app has little circles that will automatically pick out 5 colors to create a palette but you can also move over the image until each circle is over a color you want (see the screen shot upper left). You can also choose colors in a color wheel to adjust the color choices (screen shot upper right). Once you have your palette saved inot your palette library (screen shot lower left), tap on the palette to get a list of the color recipes for each color in it (screen shot lower right) … based off your specified brand of polymer! That’s pretty darn nifty! And know that Nancy has personally mixed and checked all 2000+ colors recipes available in this app–she even brought all the boxes of samples she made to prove it. Phew! She has been one busy lady!
We’ll be working on a review and a how-to-use-it article for the next issue, but in the meantime, download it for yourself and go play! It’s free to use for the next 30 days. If you like it, you can have this handy tool literally at your fingertips to capture any color sets you see out and about or online for a monthly membership ($3.99 with big discounts for pre-paid 6 & 12 month memberships) with regular color updates and/or new colors every week. Just search for “ColorMixr” (no ‘e’ in mixer) in the Google App store or Apple store.
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
Another classic color palette that works really well with mokume is the limited color palette. Limiting the colors to just two or three (and keeping them either analogous or give one a real contrast from the rest) will force you to work with value (how light or dark a color is) and composition. Too much color can be distracting in your composition and overpower your other other design elements.
In this extruded polymer mokume, Jan Montarsi uses a pink and peach color with white. There is very little contrast in the couple of colors. The colors are analogous, and the most value contrast is with the white, which is not a color at all. This minimal color set forces Jan to work with other elements like the intriguing layering and shapes within his pendant here.
The extruded mokume technique offers a lot of opportunity for the exploratory clayer. If you haven’t worked with it, it’s great fun, it can use up scrap clay if you like and creates a more definite and more controllable pattern. For a tutorial on the extruded mokume method, take a look at Kristie Foss’ nice tutorial here. And for more great mokume and beautiful finishes, have fun roaming Jan’s Flickr pages.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
I know we’ve looked at mokume before, but I have quite a few pieces that I’ve been storing up and want to share. Since the question of color palettes came up almost every day last week, let’s look at mokume and the chosen colors palettes as a jumping off point for this week’s discussion.
This set of mokume pieces was created by Carrie Harvey using a tutorial by Albina called “Hidden Flowers” (find it on Clay Lessons here.) I don’t usually post student renditions of other people’s techniques, but I think this was well done, and the color palette and shapes were a decent departure from that in the tutorial (as least as far as I can tell), which is as it should be. And the technique is really a take on mokume polymer, so it’s not particularly exclusive. It does, however, offer us an opportunity to talk about color choices.
This palette is pretty straight-forward, but can you recognize right off why it works? You have a sky blue, a coppery brown and a rust red. The blue and copper (basically orange for the sake of this conversation) are color opposites while the rust red is analogous to the orange (next to each other on the color wheel), which makes it a close contrast to the blue. In other words, all the colors have a relationship to each other, either contrasting or close enough to give the color palette cohesiveness. Although, this is a rather scientific look at these color choices, the instinctive connection comes from nature. The copper and rust red are fall leaf colors you might commonly see against a clear blue autumn sky. Nature knows how to use colors well herself, so if you are every stumped, take a look outside!
And drum roll please … The winner of our active critique week is Debbie Goodrow. Congrats Debbie. You should have an email in your inbox to let you know how to claim your giveaway. Thank you all so much for commenting. I think you all win in this little contest–the comments were incredibly insightful, and the varied point of you certainly demonstrates how much of art is really in the eye of the beholder. I hope you all found that it helped inform your view of the work and that you will keep it up, if not posting comments (and I would love to see more comments just any time), at least in your own viewing of the posts and art work. I give my opinion and my view, but as you saw last week, there are many, many ways to see a work of art.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
So, yesterday I very briefly started talking about how balance is at the center of well produced asymmetry. Here is a piece that works more toward a feeling of tension rather than being well-balanced.
In this piece, Margaret Polcawich has mixed wood and polymer clay. The strength of both materials is highlighted in the design as well as the asymmetry. The metal arm leans out to one side while the stacked shapes struggle to lean inward and in the opposite direction. There is a kind of balance in the juxtaposition of the components’ visual movement, even though that movement seems more of a struggle than an harmonious existence. But the piece is named “Temporary” and so the feeling that the balance achieved is only momentary fulfills that idea.
This Maryland artist is not only a sculptor but also a furniture designer. She calls furniture our most accessible sculpture. She explains, “While studying sculpture in college, I began utilizing the chair as a metaphor for the human figure, and have been drawn to functional art ever since.” You can see her furniture, mixed media jewelry and polymer clay accessories, along with some great Mokume
Gane tutorials, on her website.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
These days, the idea of something being modern but tribal, encircles a loose set of characteristics that can be applied to all kinds of materials, forms and techniques. The more prevalent characteristics would be earthy or naturally derived color palettes, repeated motifs with a hand drawn look, and rough, uneven edges or shapes. As we’ll see this week, that may not always be true, but if you wanted to create something more tribal or primitive looking, adding these types of elements would lean your piece in that direction.
I don’t know that I would have easily come up with a way to make mokume look tribal but even this technique, drawn from ancient Japanese metal work that demanded precision and fine skill, can be converted to reflect the idea of tribal by simply adding a few of the generalized characteristics just mentioned. Julie Picarello, known around the community for her extensive work with mokume style techniques she calls imprinting, did just this a few years ago with a line of tribal pendants as seen here.
This set of tribal pendants actually hits all the basic characteristics, but Julie’s line of tribal pendants include all kinds of color, texture and motifs, repeated and not. The uneven shapes, however, keep harkening back to the modern tribal aesthetic. Go ahead and take a look at what she’s done in this area on her website and Flickr pages, and don’t forget her book, Patterns in Polymer.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
The sense of open space we get from landscapes or any kind of broad outdoor scene can be relayed in abstract as well as literal interpretations. The draw of landscapes is in the flow of change, and maybe even the idea that a story lies in those changes as we see them shift across the length or width of a piece. And if not an actual story, there is at least the possible background to one. Or so that is always how I’ve looked at landscapes of any kind.
We’ll look at one more set of landscaped beads, but this time of a purely abstract nature, where the change in color makes up the variations across the necklace. Nathalie (who prefers to be called Nat and is under Pluie de Perles on both Flicker and CanalBlog) created this simple but effective design to showcase her lovely color scheme and purely abstract ‘scape.
Nat actually created this some 6 years ago, about the time I did my piece I shared on Monday. She did quite a few of these kinds of landscape necklaces with hanging mokume tiles that year. You can see more on her Flickr pages. Scroll down her Photostream page to get to those prior years.
Read MoreBarbara Fajardo spent some time back in 2008 playing with the pod shape. She placed canes or mokume slices over scrap clay and hand formed these lovely beads. She played with how they hung, both dangling downwards and being strung lengthwise, and with how the canes were laid. I thought these gave a nice sampling of her color work inspired by the New Mexico desert, a place of many odd pods, let me tell you.
It was hard picking an image from her collection of work on Flickr, so please do pop over to the page and get a glimpse of the necklaces she also makes, playing off the mirror effect of the folded layer look along with some other lovely cane covered pods.
As I looked around for more wild lines today, it occurred to me that the predominant squiggle source in polymer is actually found in mokume gane. Although the lines in mokume can be controlled and consistent if you want them to be, I think the real joy in the technique comes from the mystery of an unknown outcome and the wandering lines the hidden layers reveal.
This bracelet by Melanie Muir is quite the mokume gone wild. High contrast colors and variation from bead to bead make this bit of clay “doodling” quite intriguing.
Melanie is also quite the master at finishing her work. The careful edges and high polish are definitely something to aspire to. Take a look at some of her latest pieces on her website here. If you are still in the mood for more wild lines, I would suggest diving into her archive gallery, where the modest squiggle can be found quite readily.
Read MoreWhen I think about how polymer revealing works, the mokume gane approach is what first comes to mind. I remember layering clay and metal leaf for the first time, punching and squishing and hoping whatever was going on in the middle of my beat up block of clay would result in something useful. Then there was that first slice. That disappointing one when you realize it might take a few slice to see what is really going on. Then I hit it … that first really gorgeous slice with rings and waves of translucent clay revealing the dull shine of buried silver foil. It was like finding a hidden treasure. Oh, who are we kidding … it was a hidden treasure! It was like doing magic or mining or gold panning. It was so cool to see those patterns emerge out of this ugly mushed-up block of clay. I was hooked.
Since then I’ve experimented with the layer and slice approach to working with polymer in dozen of ways. It never gets old. The reveal is always so very exciting because the process is partly done blind, so you can’t be certain just what will pop up when you start slicing–which is why this piece on the right here was so eye-catching. The organically occurring composition of a mokume gane slice is layered over a very controlled stripe pattern in such a way as to suggest the mokume layer is revealing the striped layer … chaos giving way to order, chance revealing the control beneath. What a great metaphoric composition.
If you didn’t immediately recognize the artist, these pendants are the work of Julie Picarello, who is rather a master of mokume and other ‘revealing’ polymer techniques. Her book, Patterns in Polymer, includes quite a few of her approaches to revealing the depth that polymer clay can go. She also has a very rich gallery of work on Flickr you may want to meander through for further revelations.
How about today, while I wind up the release of the latest issue of The Polymer Arts, we turn to the thoughts and detailed process of Carol Simmons as she worked through some experimentation with mokume a couple years ago.
This beautiful metallic mokume is the result of Carol’s experimentation with arranging mokume strips in patterns as well as additional layers built from punched out shapes from the mokume sheet.
It’s a nice reminder that even something as intricate as mokume can be pushed just a little farther for new and interesting effects. Read about her process on Carol’s blog here.
Read More- « Previous
- 1
- 2
- 3
- 4
- Next »
