Flower Powered Polymer
May 5, 2019 Inspirational Art
Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers
So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.
Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.
Flower Power
first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.
What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.
It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.
Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.
Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.
Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.
Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.
But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.
Moving on From Flowers
To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!
The Polymer Studio, Issue #2 … click the image to see a sampler edition
Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.
Looking for your already purchased copy?
If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.
Print editions of the new issue went to the post office Wednesday directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.
I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!
All It’s Cracked Up To Be
March 17, 2019 Inspirational Art
What is it about weathered and worn surfaces that so many people find attractive these days? Mind you, I am very much one of them. I have a whole line of work called “Beautiful Decay” that explores the beauty I find in the deterioration of durable materials. But the one related effect that seems to be everywhere these days is crackling. Who doesn’t love a good crackle! From shabby chic furniture to crazed ceramics to crackle glass decor, the look of a deteriorating surface seems to have wide-ranging appeal.
Knowing that, it’s not really a surprise that crackle is so popular as a polymer technique. A great many of us are already texture fiends and, if you love texture then you are going to try crackle- so there’s one of the reasons for its popularity in polymer. But we also know that there is a market for work with crackled surfaces since it pops up in so many areas related to decoration and adornment, making it a safe bet if you sell your work.
There is no one right or best way to create a crackled surface in polymer. You may not have realized it, but there are literally dozens of ways to create crackle. It can be created with a crackle paint medium, partially cured layers of polymer (like I show you in my Controlled Crackle technique which you can find in your Fall 2011 edition of The Polymer Arts), dried paint (or glaze or gilders’ paste or floor wax) on raw clay, metal leaf on raw clay, leaching, alcohol treatments, or by creating a faux texture with impressed materials. And I know I am still missing a few in that list!
So, let’s enjoy some crackle work today and wrap up with a few tutorials on different crackle techniques that you can try out.
Let’s Get Cracking
One of my personal favorite “cracklers” is Staci Louise Smith. She uses a number of different techniques to achieve a wide range of cracked texture. In the necklace below, her crackle is not subtle. It is not evenly spread across her beads either but rather, it is rough and tumble and scattered in energetic horizontal lines. Her soft coloring calms the chaos of the crackle which is also balanced out by the many other purposeful accents and lines from the wire.
Staci can also do subtle as evidenced by the opening piece, a Balance Bowl from her tutorial in the Polymer Art Projects – Organic book. (You can get the book on our website if you want to make one of these stunning bowls.)
Check out this blog post where she shares how she makes the necklace here along with sketches and her thoughts on the process.
A subtle crackle can often take a bit more patience but what a lovely effect it can have. It may not even be obvious at first that the beads on this necklace below by Ursa Polak have a crackle surface, but the weathered feel comes across immediately. Take a close look to see all the fine-lined cracks that add to the depth and variation of the surface.
Kroma Crackle is a lovely gel medium that itself dries and cracks without having to stretch the clay and yet remains flexible so that you can manipulate the clay without the cracked material popping off. Once you worked with it for a bit you can control the size of the crackle pretty well. You can add small amounts of acrylic paint or mica powders to give yourself a wide variety of color options. You can also apply paints, inks, dyes and other colorants on it after its dry.
These earrings are by Els van Haasen uses Kroma Crackle on polymer. You can see how regular a crackle you can get with this medium. But it can definitely be quite varied once you come to understand how to use it.
You almost forget that the technique that was most commonly used by the highly esteemed Elise Winters, who we lost just this year, was also a crackle technique. Her work was very controlled, as was crackle but that was probably the most recognizable part about her signature style. I can only imagine the work she put into gaining such control over her crackle, but it just shows what can be done when we invest a bit of patience into our work. (I erroneously put in that this was metal leaf when I first posted but, no, it’s paint, which also takes such skilled control, having to ensure that the paint is evenly applied to get such fine crackle.)
This is actually a piece of mine from some years back. It includes alcohol treated raw clay, controlled cracking of partially cured clay, and metal leaf colored with alcohol ink. The alcohol treatment is a way of drying out the surface of raw clay to get a very fine crazing. It’s a bit of a tricky technique but it sure worked here. That helped create the uneven surface of the partially cured polymer under the metal leaf, giving it a burning ember look.
Let’s Crack You Up
Ready to try some various cracking techniques? Here are a few freebies to get you going:
If you want to try the straightforward Paint Crackle Techniques:
- Grab a craft acrylic (the cheap acrylics work better than artist tube acrylics which tend to stretch rather than crack) or tempera paint and a well-conditioned sheet of polymer rolled on the thickest setting of your pasta machine.
- Brush a moderate (not heavy) layer of the paint onto the polymer. Wait for it to completely dry.
- Then roll it through the pasta machine set at two settings down from the thickness you created the sheet on. You can stop here or, for wider, more varied crackle, turn the sheet 90°, adjust the pasta machine down another one or two settings and run it through again.
- You should have a nice crackle now but if your paint is stretching rather than cracking, rolling another sheet of polymer and lay the crackle sheet on top and then start rolling it through the pasta machine again. Eventually, the paint will crack but sometimes you need a really thick layer of polymer to start in order to stretch it far enough. Tempera paint won’t stretch and cracks very nicely if you have that on hand or fancy a run to your local craft store. You could also get some crackle medium while you’re out and follow the instructions to crackle paint directly on your raw polymer clay.
You can find some examples of the use of different paints on this post by Jan Geisen.
For more tutorials online:
- One of the things I didn’t show you in the samples above was how to use impression material to create a faux crackle effect. I use crumpled aluminum foil for this and then use the antiquing approach of rubbing acrylic paint into the cracks after its cured and wiping it off. But Katie Oskin has an interesting material to share in this online tutorial, as well as showing the effect of painting it before she impresses it.
- In this video tutorial, Sandy Huntress shows you how to crackle very thin sheets of partially cured polymer clay.
- Crackling can be done on round surfaces too! Here’s an online tutorial using metal leaf on bicone beads to create crackle. Keep in mind you could do the same thing by painting the beads and then rolling them around to get it crack.
Do you know of other great crackle tutorials or want to point out another crackling technique I didn’t mention? Drop a comment below (if you’re on this post’s page online) or click on the title of this post to go to the post’s page and share the info with us all. It would be much appreciated!
Bits of News
- The IPCA announced the winners of the IPCA awards on Wednesday. Here is a video presentation of it. Or you can find the list here.
- Registration is now open for Dan Cormier and Tracy Holmes new online course, Matrix Canes.
- What are you doing with your tax refund this year? How about getting that NeverKnead machine you’ve been wanting for forever? Get 10% off your new machine now on the website. Use promo code 10PERCENT.
Okay… Off with me. Working on the next issue of The Polymer Studio. Get your subscription or catch up if you didn’t get the first issue by just jumping over to the website now.
Know that your purchases and subscriptions help me pay the bills so I can justify the time I put into sharing all the good stuff on this blog. Help me help you as we collectively feed our addiction to polymer!
Have a wonderful and creative week! –Sage
Plethora of Patterned Plates
June 15, 2016 Uncategorized
We have some incredibly beautiful work in the gallery sections this issue. We are very fortunate that we got Bonnie Bishoff and J.M. Syron to showcase their new work (and grace the cover) and are thrilled to have the latest work from Staci Smith to share with you, as well.
The surprise gem of our collection in the Summer issue of The Polymer Arts galleries, I think, is the beautifully patterned plates by Arieta Stavridou of Nicosia, Cyprus. We had an incidental conversation on Facebook about the Polymer Journeys book and in clicking through I found this photo of them. Not that applying canes to plates is new, but her pattern and color choices are just gorgeous. Placement, orientation, and pattern combinations are very intentional, intention being so important in art, especially in something like this. I loaded a large image of this plate collection so you can click on it and see the detail better.
I talk a bit more about intention in art in my editor’s letter in this issue, as well. And, of course, we have many more of Arieta’s plates to admire along with her fun teapots in the Summer issue’s gallery pages. You can also see more of her work on her Facebook pages.
Inspirational Challenge of the Day: Create or design a piece with very intentional repeated but varied patterns. This can be several different canes, hand tooled marks, or repeated motifs. You could even do a combination of these. Combine the elements used for the pattern based on some specific concept. Any concept will do as long as it has a very intentional connection, such as analogous colors, the flowers in your garden, symbols of ancient Greece, or images that remind you of your beach vacation.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Sophisticated Form
April 29, 2016 Inspirational Art
Last, but certainly not least, in this two week tour of our “best of” chosen artists for the Polymer Journeys 2016 book, we have Melanie Muir who is our sole representative of Scotland in the book. I think the draw Melanie’s work has is in its clean sophistication. She is so precise and has honed her particular set of techniques to absolute perfection.
Her mokume, although organic and flowing, has a feel of precision as well. The clean lines in her mokume come from a stamp or texture impression technique like the one you’ll find in the tutorial by Angela Barenholtz in our Winter 2015 issue of The Polymer Arts magazine.
Her large necklaces are lovely, of course, but I am partial to her pendants where the focus is on the mokume design, framed and centered so that the intricacies of the pattern grab your attention all by themselves. I love the color choices in this one, a bit autumnal using white to set up the saturation of the color. I found this little beauty while wandering around Melanie’s Facebook page.
Her precise shapes also generally come from a set of tools–her own shape templates. Because, like so many of our amazing polymer artists, Melanie applies her talents in more than one area, in this case, the creation of textures and templates. If you haven’t seen her offerings, you can find them on her site here and you can also purchase them on Etsy.
Inspirational Challenge of the Day: Focus on perfection. Create a small piece using a technique you’ve worked with before but maybe have not been doing for very long, and try to create the most perfect version of it. This may take a little forethought and patience to figure out how best to handle the material so it is not marred or defaced with finger prints to finish it well. You might want to take such additional steps as multiple curings or refrigerating to let the work rest between manipulations. See what you learn from examining and changing up the way you work. Can you develop more careful steps in your process or do you even want to?
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Patterned Perfection
April 27, 2016 Inspirational Art
I saw a piece of Jon Stuart Anderson’s, before I even knew what polymer clay was, in a gift shop in the Denver airport. It was a frog so beautifully patterned in a material I didn’t know and since it was nothing I could afford that was as far as my admiration was able to go. It wasn’t until several years later when I was starting the magazine that I found Jon’s work again. We were compiling our resource list of artists and my assistant found his work and couldn’t stop gushing over it. Then he saw Jon’s work in that same gift shop and called me quite excited about seeing it in person and it clicked into place that I had seen this work in person myself.
I got to interview Jon, the first person he ever agreed to do that for, a year later. In a phone call from Bali, I got to know Jon a bit and was even more impressed by his kindness and joyful nature not to mention his complete immersion and dedication to his craft. He is certainly one of brightest gems and it’s no surprise that the board found him to have some of the best work of the last couple years.
Although Jon creates a lot more than animals, those are his best known pieces. I was going to pull out one of his sculptures or laminated guitars for you but these fish heads were too beautiful and fun and I don’t think they’ve really gotten around the web like his other creatures. The canes on top along with the varied texture of their underbellies show his wide range of fine caning skills and his brilliant use of color.
Images are really not enough to convey the vibrant colors and the flawless finish of Jon’s work. His work is in galleries and gift shops all over the world so keep your eye out for his work or see if you can nab some gorgeous piece from his retailer directly. In the meantime, you can discover more of his pieces on his website and for your tea or coffee break, I suggest sitting down to watch his videos on how he makes his canes. It’s a treat to watch a master at work!
Inspirational Challenge of the Day: Make the theme of your next piece ‘pattern’. Create small patterns, textural or visual, that are repeated over and over lining up to emphasize form or create the feel of movement. You could create with canes but you can also use handmade stamps, hand-tooled marks, or tiny tiles or shapes punched out of textured sheets of clay.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers
So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.
Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.
Flower Power
first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.
What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.
It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.
Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.
Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.
Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.
Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.
But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.
Moving on From Flowers
To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!
The Polymer Studio, Issue #2 … click the image to see a sampler edition
Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.
Looking for your already purchased copy?
If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.
Print editions of the new issue went to the post office Wednesday directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.
I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!
Read More
What is it about weathered and worn surfaces that so many people find attractive these days? Mind you, I am very much one of them. I have a whole line of work called “Beautiful Decay” that explores the beauty I find in the deterioration of durable materials. But the one related effect that seems to be everywhere these days is crackling. Who doesn’t love a good crackle! From shabby chic furniture to crazed ceramics to crackle glass decor, the look of a deteriorating surface seems to have wide-ranging appeal.
Knowing that, it’s not really a surprise that crackle is so popular as a polymer technique. A great many of us are already texture fiends and, if you love texture then you are going to try crackle- so there’s one of the reasons for its popularity in polymer. But we also know that there is a market for work with crackled surfaces since it pops up in so many areas related to decoration and adornment, making it a safe bet if you sell your work.
There is no one right or best way to create a crackled surface in polymer. You may not have realized it, but there are literally dozens of ways to create crackle. It can be created with a crackle paint medium, partially cured layers of polymer (like I show you in my Controlled Crackle technique which you can find in your Fall 2011 edition of The Polymer Arts), dried paint (or glaze or gilders’ paste or floor wax) on raw clay, metal leaf on raw clay, leaching, alcohol treatments, or by creating a faux texture with impressed materials. And I know I am still missing a few in that list!
So, let’s enjoy some crackle work today and wrap up with a few tutorials on different crackle techniques that you can try out.
Let’s Get Cracking
One of my personal favorite “cracklers” is Staci Louise Smith. She uses a number of different techniques to achieve a wide range of cracked texture. In the necklace below, her crackle is not subtle. It is not evenly spread across her beads either but rather, it is rough and tumble and scattered in energetic horizontal lines. Her soft coloring calms the chaos of the crackle which is also balanced out by the many other purposeful accents and lines from the wire.
Staci can also do subtle as evidenced by the opening piece, a Balance Bowl from her tutorial in the Polymer Art Projects – Organic book. (You can get the book on our website if you want to make one of these stunning bowls.)
Check out this blog post where she shares how she makes the necklace here along with sketches and her thoughts on the process.
A subtle crackle can often take a bit more patience but what a lovely effect it can have. It may not even be obvious at first that the beads on this necklace below by Ursa Polak have a crackle surface, but the weathered feel comes across immediately. Take a close look to see all the fine-lined cracks that add to the depth and variation of the surface.
Kroma Crackle is a lovely gel medium that itself dries and cracks without having to stretch the clay and yet remains flexible so that you can manipulate the clay without the cracked material popping off. Once you worked with it for a bit you can control the size of the crackle pretty well. You can add small amounts of acrylic paint or mica powders to give yourself a wide variety of color options. You can also apply paints, inks, dyes and other colorants on it after its dry.
These earrings are by Els van Haasen uses Kroma Crackle on polymer. You can see how regular a crackle you can get with this medium. But it can definitely be quite varied once you come to understand how to use it.
You almost forget that the technique that was most commonly used by the highly esteemed Elise Winters, who we lost just this year, was also a crackle technique. Her work was very controlled, as was crackle but that was probably the most recognizable part about her signature style. I can only imagine the work she put into gaining such control over her crackle, but it just shows what can be done when we invest a bit of patience into our work. (I erroneously put in that this was metal leaf when I first posted but, no, it’s paint, which also takes such skilled control, having to ensure that the paint is evenly applied to get such fine crackle.)
This is actually a piece of mine from some years back. It includes alcohol treated raw clay, controlled cracking of partially cured clay, and metal leaf colored with alcohol ink. The alcohol treatment is a way of drying out the surface of raw clay to get a very fine crazing. It’s a bit of a tricky technique but it sure worked here. That helped create the uneven surface of the partially cured polymer under the metal leaf, giving it a burning ember look.
Let’s Crack You Up
Ready to try some various cracking techniques? Here are a few freebies to get you going:
If you want to try the straightforward Paint Crackle Techniques:
- Grab a craft acrylic (the cheap acrylics work better than artist tube acrylics which tend to stretch rather than crack) or tempera paint and a well-conditioned sheet of polymer rolled on the thickest setting of your pasta machine.
- Brush a moderate (not heavy) layer of the paint onto the polymer. Wait for it to completely dry.
- Then roll it through the pasta machine set at two settings down from the thickness you created the sheet on. You can stop here or, for wider, more varied crackle, turn the sheet 90°, adjust the pasta machine down another one or two settings and run it through again.
- You should have a nice crackle now but if your paint is stretching rather than cracking, rolling another sheet of polymer and lay the crackle sheet on top and then start rolling it through the pasta machine again. Eventually, the paint will crack but sometimes you need a really thick layer of polymer to start in order to stretch it far enough. Tempera paint won’t stretch and cracks very nicely if you have that on hand or fancy a run to your local craft store. You could also get some crackle medium while you’re out and follow the instructions to crackle paint directly on your raw polymer clay.
You can find some examples of the use of different paints on this post by Jan Geisen.
For more tutorials online:
- One of the things I didn’t show you in the samples above was how to use impression material to create a faux crackle effect. I use crumpled aluminum foil for this and then use the antiquing approach of rubbing acrylic paint into the cracks after its cured and wiping it off. But Katie Oskin has an interesting material to share in this online tutorial, as well as showing the effect of painting it before she impresses it.
- In this video tutorial, Sandy Huntress shows you how to crackle very thin sheets of partially cured polymer clay.
- Crackling can be done on round surfaces too! Here’s an online tutorial using metal leaf on bicone beads to create crackle. Keep in mind you could do the same thing by painting the beads and then rolling them around to get it crack.
Do you know of other great crackle tutorials or want to point out another crackling technique I didn’t mention? Drop a comment below (if you’re on this post’s page online) or click on the title of this post to go to the post’s page and share the info with us all. It would be much appreciated!
Bits of News
- The IPCA announced the winners of the IPCA awards on Wednesday. Here is a video presentation of it. Or you can find the list here.
- Registration is now open for Dan Cormier and Tracy Holmes new online course, Matrix Canes.
- What are you doing with your tax refund this year? How about getting that NeverKnead machine you’ve been wanting for forever? Get 10% off your new machine now on the website. Use promo code 10PERCENT.
Okay… Off with me. Working on the next issue of The Polymer Studio. Get your subscription or catch up if you didn’t get the first issue by just jumping over to the website now.
Know that your purchases and subscriptions help me pay the bills so I can justify the time I put into sharing all the good stuff on this blog. Help me help you as we collectively feed our addiction to polymer!
Have a wonderful and creative week! –Sage
Read More
We have some incredibly beautiful work in the gallery sections this issue. We are very fortunate that we got Bonnie Bishoff and J.M. Syron to showcase their new work (and grace the cover) and are thrilled to have the latest work from Staci Smith to share with you, as well.
The surprise gem of our collection in the Summer issue of The Polymer Arts galleries, I think, is the beautifully patterned plates by Arieta Stavridou of Nicosia, Cyprus. We had an incidental conversation on Facebook about the Polymer Journeys book and in clicking through I found this photo of them. Not that applying canes to plates is new, but her pattern and color choices are just gorgeous. Placement, orientation, and pattern combinations are very intentional, intention being so important in art, especially in something like this. I loaded a large image of this plate collection so you can click on it and see the detail better.
I talk a bit more about intention in art in my editor’s letter in this issue, as well. And, of course, we have many more of Arieta’s plates to admire along with her fun teapots in the Summer issue’s gallery pages. You can also see more of her work on her Facebook pages.
Inspirational Challenge of the Day: Create or design a piece with very intentional repeated but varied patterns. This can be several different canes, hand tooled marks, or repeated motifs. You could even do a combination of these. Combine the elements used for the pattern based on some specific concept. Any concept will do as long as it has a very intentional connection, such as analogous colors, the flowers in your garden, symbols of ancient Greece, or images that remind you of your beach vacation.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Read MoreLast, but certainly not least, in this two week tour of our “best of” chosen artists for the Polymer Journeys 2016 book, we have Melanie Muir who is our sole representative of Scotland in the book. I think the draw Melanie’s work has is in its clean sophistication. She is so precise and has honed her particular set of techniques to absolute perfection.
Her mokume, although organic and flowing, has a feel of precision as well. The clean lines in her mokume come from a stamp or texture impression technique like the one you’ll find in the tutorial by Angela Barenholtz in our Winter 2015 issue of The Polymer Arts magazine.
Her large necklaces are lovely, of course, but I am partial to her pendants where the focus is on the mokume design, framed and centered so that the intricacies of the pattern grab your attention all by themselves. I love the color choices in this one, a bit autumnal using white to set up the saturation of the color. I found this little beauty while wandering around Melanie’s Facebook page.
Her precise shapes also generally come from a set of tools–her own shape templates. Because, like so many of our amazing polymer artists, Melanie applies her talents in more than one area, in this case, the creation of textures and templates. If you haven’t seen her offerings, you can find them on her site here and you can also purchase them on Etsy.
Inspirational Challenge of the Day: Focus on perfection. Create a small piece using a technique you’ve worked with before but maybe have not been doing for very long, and try to create the most perfect version of it. This may take a little forethought and patience to figure out how best to handle the material so it is not marred or defaced with finger prints to finish it well. You might want to take such additional steps as multiple curings or refrigerating to let the work rest between manipulations. See what you learn from examining and changing up the way you work. Can you develop more careful steps in your process or do you even want to?
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Read MoreI saw a piece of Jon Stuart Anderson’s, before I even knew what polymer clay was, in a gift shop in the Denver airport. It was a frog so beautifully patterned in a material I didn’t know and since it was nothing I could afford that was as far as my admiration was able to go. It wasn’t until several years later when I was starting the magazine that I found Jon’s work again. We were compiling our resource list of artists and my assistant found his work and couldn’t stop gushing over it. Then he saw Jon’s work in that same gift shop and called me quite excited about seeing it in person and it clicked into place that I had seen this work in person myself.
I got to interview Jon, the first person he ever agreed to do that for, a year later. In a phone call from Bali, I got to know Jon a bit and was even more impressed by his kindness and joyful nature not to mention his complete immersion and dedication to his craft. He is certainly one of brightest gems and it’s no surprise that the board found him to have some of the best work of the last couple years.
Although Jon creates a lot more than animals, those are his best known pieces. I was going to pull out one of his sculptures or laminated guitars for you but these fish heads were too beautiful and fun and I don’t think they’ve really gotten around the web like his other creatures. The canes on top along with the varied texture of their underbellies show his wide range of fine caning skills and his brilliant use of color.
Images are really not enough to convey the vibrant colors and the flawless finish of Jon’s work. His work is in galleries and gift shops all over the world so keep your eye out for his work or see if you can nab some gorgeous piece from his retailer directly. In the meantime, you can discover more of his pieces on his website and for your tea or coffee break, I suggest sitting down to watch his videos on how he makes his canes. It’s a treat to watch a master at work!
Inspirational Challenge of the Day: Make the theme of your next piece ‘pattern’. Create small patterns, textural or visual, that are repeated over and over lining up to emphasize form or create the feel of movement. You could create with canes but you can also use handmade stamps, hand-tooled marks, or tiny tiles or shapes punched out of textured sheets of clay.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Read More