The Allure of the Box & Important News

December 1, 2019

Do you, like many people, find boxes really intriguing? Why do we like boxes? I mean, sure, they are convenient for storing things, hiding things, shipping stuff, and wrapping up gifts. But some of us (myself very much included) can become rather infatuated with them. I know I have a hard time passing a box and not opening it up. Boxes have this mysterious unknown interior that could be holding just about anything that will fit. The possibilities poke at our curiosity.

The things with in a box become automatically precious or necessary. Why put something in a box if it is not valuable or you do not think it will become useful in the future? So, boxes hold valuables of a sort, normally. So why wouldn’t you want to peek in and see what kind of fabulous things are inside?

I bring up boxes because I have a bit of news that has to do with boxes. Say uncle scrolling down to the end of the post to see what my news is, here it is. Then we’ll look at a few polymer boxes to further contemplate

 

The Good, the Bad, and the Exciting

Note: If you are an existing subscriber to The Polymer Studio, you should already have received an email with this information. (If you believe you are an existing subscriber and did not get a subscription status email, check your junk mail folder. You can also check your subscription status on your account page here.)

So, after 4 months of working on my health and arm injury, I have gotten to the point where I have been able to determine, more or less, what I can and can’t do going forward, and since it is apparent that I will continue to be restricted for the foreseeable future, I have made plans accordingly:

The Good:
As of January, I will be resuming work on publications for 2020 and am working on new projects now.

The Bad:
I am shutting down The Polymer Studio magazine for good. I have, however, set-up exciting options for fulfilling subscriptions for existing subscribers, primarily the new Box project you’ll read about below. (More details for subscribers are in the email sent out earlier today.)

The Exciting:
I have 3 exciting projects that Tenth Muse Arts will be offering this coming year–

  • I will be scheduling 2 book publications for 2020, including the second Polymer Arts Projects book (the theme will be Shimmer and Shine) and a book on expanding your creativity yet to be titled.
  • I will be expanding our shop to include hard to get and self-published polymer and mixed media related books to connect the community with more great artists and authors.
  • And… instead of a regularly published magazine we will be offering a monthly Virtual Art Box for polymer and mixed media creatives.

I know, I know … there are a lot of questions those announcements bring up like what is a Virtual Art Box and why am I not publishing the magazine any longer? And I have answers so, read on!

 

What is the Virtual Tenth Muse Art Box?

The Virtual Art Box is a digital package of invaluable articles, lessons, specials, and printable tools all geared to advance your creative self and give you more “a-ha” moments. Like a magazine, we will be providing serendipitous educational and inspirational content but with additional tools and perks that just couldn’t be produced in the pages of a publication.

Each Virtual Art Box will include:

  • Design immersion lessons (weekly)
  • Creativity Cultivation seminars & worksheets (every month)
  • Customizable challenges (every month)
  • Art Nudges (weekly)

… as well a variety of these possible items:

  • Project and technique tutorials
  • Demonstrations
  • Interviews
  • Printable gadgets and aids
  • Retail partner discounts and specials
  • Sneak peaks and Box subscriber only discounts for Tenth Muse Arts publications
  • And whatever other great goodies we think up or you suggest along the way.

The Virtual Art Box will be multimedia to include video and downloadable PDFs and will be sent out monthly. They will be available as a automatically billed monthly and quarterly subscriptions that can be canceled at any time. The first box will be sent off February of 2020. Subscriptions aren’t available quite yet, but we’ll let you know when we have all that technical stuff done so you can! (Existing subscribers will be automatically signed up for the Virtual Art Box or they will have the option to request store credit – details for subscribers will be sent out this coming week.)

 

Why No Magazine?

As many of you know, I halted magazine production in August because of health issues. Although I am not through the full six months recommended for recovery time, it has already become apparent that there is some permanent damage in my arm and there is still a long road ahead for the other health issues I am dealing with. So, something had to be changed.

Being the primary editor and layout designer for the magazine, and facing the reality that I can no longer carry my usual workload, my only option for keeping the magazine going would be to hire more third-party contractors which would result in one or, most likely, all of three things – significantly raising the price of the magazine, jeopardizing the quality of the production and content, and/or not paying the contributing writers and artists. I am not happy with the idea of any of these outcomes and instead I have chosen to discontinue the magazine and work in formats that put less repetitive strain on my arm and should be better able to financially support additional contracted staff as needed.

I am more than a little sad about closing down the magazine. I’ve been publishing periodicals for the polymer community for over eight years and have worked in magazines since high school. However, I’m hoping, with these new ventures, I can continue to inspire, educate, and increase your joy and fulfillment in your creative endeavors through these other exciting avenues.

How Does This Affect This Blog?

So, as you might have noticed, one of the items in the Virtual Art Box is a weekly design lesson. Well, that’s basically what I’ve been doing on the blog this year but, without a magazine to promote on a regular basis, it’s been hard to justify the time that goes into these article length posts beyond the fact that I love doing them. But the mantra for this next year is to work smart.

So, what will happen is that the full-length posts plus other notes and nudges based on the content of the virtual box will be sent to the Virtual Art Box subscribers each weekend. Here, on this publicly accessible blog, I will do an abbreviated version of the subscriber’s weekly design immersion content so I can keep nudging folks to look closer at the design of their creations.

Starting this month, I will be creating those abbreviated posts so I can focus on wrapping up the details of this new project, hire a new assistant, and get a production schedule up for next year for the books. All that with the holidays in the midst of it. Sounds like I’m getting crazy again but I promise to do as the doctor orders. I am really looking forward to being productive again!

 

Now What about Those Boxes?

With polymer, you can make boxes in two ways – you can cover an existing box form or you can create your own box. Let’s put it at a few examples of both.

Covering a RD existing box is, obviously, the easiest way to create a polymer box. It may seem like a shortcut but if you spend a lot of time creating beautiful veneers or sculptural elements for the outside the box, there’s no need to spend a lot of time creating the box from polymer. Remember, it’s better to use the material that makes the most sense for what you are creating rather than limit yourself to one material.

Aniko Kolesnikova, famous for her journal covers, also covers boxes. Using her bas-relief style sculptural approach, she created this commissioned box based on the card game, Magic: The Gathering. The box top worked as a canvas but the dimensional aspect allowed her to flow each of the elements over its edge, taking up the dynamic energy and knowledge. Click on the image to get her blog post about how she made this including sketches and close-ups.

 

Fiona Abel-Smith looks to have created her actual box forms out of polymer and then covers it with a technique she learned, and eventually perfected, from Sue Heaser. The process is based on the classic mosaic-like technique of pietra dura. Laying a clay colored base for the shapes in the images, Fiona then adds bits, cut from extruded snakes of clay, to the image for texture. The intense technique creates beautiful, lively illustrations. Fiona’s also created a post about her boxes, showing her variations and their many sides along with photos of her process. Click the image to see the post.

If you are making your own polymer boxes, you have the option of leaving the square behind in making her boxes in any shape whatsoever. The opening image and the image below are boxes by Helen Wyland-Malchow. The opening image, Box 22, was her winning entry into Polymer Journeys 2019. This one, Landscape Box, below has always been one of my personal favorites though. That is really pushing the idea of a box in such a wonderful and dynamic way. Squares are bit static, which allows the imagery on the box to stand out but curves are fabulously high-energy and fun.

So, how about you? Have you created covered boxes or constructed your own from polymer? That could be a fun challenge this month if you haven’t worked with boxes yet. They make fantastic gifts for pretty much anyone. Who couldn’t use a box? If you’d like to create your own polymer boxes, there is a great tutorial (if I do say so myself) by me on constructing a 100% polymer box in the Winter 2015 issue of The Polymer Arts (also available in digital for immediate download here.)

 

Putting the Lid on It

Well, that’s enough blathering at you for this weekend. I haven’t had time to take pictures of the kitchen backsplash I was working on, which is basically done except for the grout, but I’ll share that with you next weekend, hopefully in its final form.

And last but not least, I want to thank each and every one of you who have been cheering me on the last 8 years, for sending your appreciative and supportive messages, particularly in these the last 4 months. I look forward to you coming along with me on these new and continued artistic ventures as we explore this fantastic medium, growing our creative selves and our community.

 

A Gateway Tutorial to the World of Polymer Boxes

April 25, 2015

polymer_clay_tutorial_-_matchbox_amulets_part_2_-_inner_sanctum_8b1de758I figured there were a number of you who might have been intrigued by the containment form of adornment this week but thought it would be too much work to get into it. However, I have found a ‘gateway’ tutorial that might just get you addicted to the idea of making container necklaces. Then, you might find yourself moving onto purses or who know what else. In any case, if you like the form, you really should give it a try.

These matchbox amulets, as Tina Holden calls them, address both the inside and outside of this form. They have a slider similar to inros, but a construction that may be a bit more accessible to the novice box maker. She sells a two-part tutorial on her ArtFire page for those of you who want to jump in with pretty much guaranteed success. If you have already played around or you create container adornments, this could be inspiration for a new form.

You can find the two-part tutorial on this link here, or, if you don’t want to dive in wholly at this point, you can get Part 1 here, and then go for Part 2 later when you see just how addictive it is! She has a lot of other tutorials to offer, so if you aren’t up for boxes right now, still stop by her shop to see if something else piques your interest.

*Update: If you want to try your hand at another polymer matchbox design, Randee Ketzel sent this link to an older tutorial where it is opened by moving the outside of the box up the cord rather than pulling the inside up. This would not be ideal to hold loose objects (if the outside gets jostled up, items could fall out) but looks to work great as an amulet with hidden items secured inside. It is free so you can give it a try before you buy something more detailed like Tina’s tutorial: http://www.pcpolyzine.com/2000december/matchbook.html  Thanks for that Randee!

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

The Allure of the Box & Important News

December 1, 2019
Posted in

Do you, like many people, find boxes really intriguing? Why do we like boxes? I mean, sure, they are convenient for storing things, hiding things, shipping stuff, and wrapping up gifts. But some of us (myself very much included) can become rather infatuated with them. I know I have a hard time passing a box and not opening it up. Boxes have this mysterious unknown interior that could be holding just about anything that will fit. The possibilities poke at our curiosity.

The things with in a box become automatically precious or necessary. Why put something in a box if it is not valuable or you do not think it will become useful in the future? So, boxes hold valuables of a sort, normally. So why wouldn’t you want to peek in and see what kind of fabulous things are inside?

I bring up boxes because I have a bit of news that has to do with boxes. Say uncle scrolling down to the end of the post to see what my news is, here it is. Then we’ll look at a few polymer boxes to further contemplate

 

The Good, the Bad, and the Exciting

Note: If you are an existing subscriber to The Polymer Studio, you should already have received an email with this information. (If you believe you are an existing subscriber and did not get a subscription status email, check your junk mail folder. You can also check your subscription status on your account page here.)

So, after 4 months of working on my health and arm injury, I have gotten to the point where I have been able to determine, more or less, what I can and can’t do going forward, and since it is apparent that I will continue to be restricted for the foreseeable future, I have made plans accordingly:

The Good:
As of January, I will be resuming work on publications for 2020 and am working on new projects now.

The Bad:
I am shutting down The Polymer Studio magazine for good. I have, however, set-up exciting options for fulfilling subscriptions for existing subscribers, primarily the new Box project you’ll read about below. (More details for subscribers are in the email sent out earlier today.)

The Exciting:
I have 3 exciting projects that Tenth Muse Arts will be offering this coming year–

  • I will be scheduling 2 book publications for 2020, including the second Polymer Arts Projects book (the theme will be Shimmer and Shine) and a book on expanding your creativity yet to be titled.
  • I will be expanding our shop to include hard to get and self-published polymer and mixed media related books to connect the community with more great artists and authors.
  • And… instead of a regularly published magazine we will be offering a monthly Virtual Art Box for polymer and mixed media creatives.

I know, I know … there are a lot of questions those announcements bring up like what is a Virtual Art Box and why am I not publishing the magazine any longer? And I have answers so, read on!

 

What is the Virtual Tenth Muse Art Box?

The Virtual Art Box is a digital package of invaluable articles, lessons, specials, and printable tools all geared to advance your creative self and give you more “a-ha” moments. Like a magazine, we will be providing serendipitous educational and inspirational content but with additional tools and perks that just couldn’t be produced in the pages of a publication.

Each Virtual Art Box will include:

  • Design immersion lessons (weekly)
  • Creativity Cultivation seminars & worksheets (every month)
  • Customizable challenges (every month)
  • Art Nudges (weekly)

… as well a variety of these possible items:

  • Project and technique tutorials
  • Demonstrations
  • Interviews
  • Printable gadgets and aids
  • Retail partner discounts and specials
  • Sneak peaks and Box subscriber only discounts for Tenth Muse Arts publications
  • And whatever other great goodies we think up or you suggest along the way.

The Virtual Art Box will be multimedia to include video and downloadable PDFs and will be sent out monthly. They will be available as a automatically billed monthly and quarterly subscriptions that can be canceled at any time. The first box will be sent off February of 2020. Subscriptions aren’t available quite yet, but we’ll let you know when we have all that technical stuff done so you can! (Existing subscribers will be automatically signed up for the Virtual Art Box or they will have the option to request store credit – details for subscribers will be sent out this coming week.)

 

Why No Magazine?

As many of you know, I halted magazine production in August because of health issues. Although I am not through the full six months recommended for recovery time, it has already become apparent that there is some permanent damage in my arm and there is still a long road ahead for the other health issues I am dealing with. So, something had to be changed.

Being the primary editor and layout designer for the magazine, and facing the reality that I can no longer carry my usual workload, my only option for keeping the magazine going would be to hire more third-party contractors which would result in one or, most likely, all of three things – significantly raising the price of the magazine, jeopardizing the quality of the production and content, and/or not paying the contributing writers and artists. I am not happy with the idea of any of these outcomes and instead I have chosen to discontinue the magazine and work in formats that put less repetitive strain on my arm and should be better able to financially support additional contracted staff as needed.

I am more than a little sad about closing down the magazine. I’ve been publishing periodicals for the polymer community for over eight years and have worked in magazines since high school. However, I’m hoping, with these new ventures, I can continue to inspire, educate, and increase your joy and fulfillment in your creative endeavors through these other exciting avenues.

How Does This Affect This Blog?

So, as you might have noticed, one of the items in the Virtual Art Box is a weekly design lesson. Well, that’s basically what I’ve been doing on the blog this year but, without a magazine to promote on a regular basis, it’s been hard to justify the time that goes into these article length posts beyond the fact that I love doing them. But the mantra for this next year is to work smart.

So, what will happen is that the full-length posts plus other notes and nudges based on the content of the virtual box will be sent to the Virtual Art Box subscribers each weekend. Here, on this publicly accessible blog, I will do an abbreviated version of the subscriber’s weekly design immersion content so I can keep nudging folks to look closer at the design of their creations.

Starting this month, I will be creating those abbreviated posts so I can focus on wrapping up the details of this new project, hire a new assistant, and get a production schedule up for next year for the books. All that with the holidays in the midst of it. Sounds like I’m getting crazy again but I promise to do as the doctor orders. I am really looking forward to being productive again!

 

Now What about Those Boxes?

With polymer, you can make boxes in two ways – you can cover an existing box form or you can create your own box. Let’s put it at a few examples of both.

Covering a RD existing box is, obviously, the easiest way to create a polymer box. It may seem like a shortcut but if you spend a lot of time creating beautiful veneers or sculptural elements for the outside the box, there’s no need to spend a lot of time creating the box from polymer. Remember, it’s better to use the material that makes the most sense for what you are creating rather than limit yourself to one material.

Aniko Kolesnikova, famous for her journal covers, also covers boxes. Using her bas-relief style sculptural approach, she created this commissioned box based on the card game, Magic: The Gathering. The box top worked as a canvas but the dimensional aspect allowed her to flow each of the elements over its edge, taking up the dynamic energy and knowledge. Click on the image to get her blog post about how she made this including sketches and close-ups.

 

Fiona Abel-Smith looks to have created her actual box forms out of polymer and then covers it with a technique she learned, and eventually perfected, from Sue Heaser. The process is based on the classic mosaic-like technique of pietra dura. Laying a clay colored base for the shapes in the images, Fiona then adds bits, cut from extruded snakes of clay, to the image for texture. The intense technique creates beautiful, lively illustrations. Fiona’s also created a post about her boxes, showing her variations and their many sides along with photos of her process. Click the image to see the post.

If you are making your own polymer boxes, you have the option of leaving the square behind in making her boxes in any shape whatsoever. The opening image and the image below are boxes by Helen Wyland-Malchow. The opening image, Box 22, was her winning entry into Polymer Journeys 2019. This one, Landscape Box, below has always been one of my personal favorites though. That is really pushing the idea of a box in such a wonderful and dynamic way. Squares are bit static, which allows the imagery on the box to stand out but curves are fabulously high-energy and fun.

So, how about you? Have you created covered boxes or constructed your own from polymer? That could be a fun challenge this month if you haven’t worked with boxes yet. They make fantastic gifts for pretty much anyone. Who couldn’t use a box? If you’d like to create your own polymer boxes, there is a great tutorial (if I do say so myself) by me on constructing a 100% polymer box in the Winter 2015 issue of The Polymer Arts (also available in digital for immediate download here.)

 

Putting the Lid on It

Well, that’s enough blathering at you for this weekend. I haven’t had time to take pictures of the kitchen backsplash I was working on, which is basically done except for the grout, but I’ll share that with you next weekend, hopefully in its final form.

And last but not least, I want to thank each and every one of you who have been cheering me on the last 8 years, for sending your appreciative and supportive messages, particularly in these the last 4 months. I look forward to you coming along with me on these new and continued artistic ventures as we explore this fantastic medium, growing our creative selves and our community.

 

Read More

A Gateway Tutorial to the World of Polymer Boxes

April 25, 2015
Posted in

polymer_clay_tutorial_-_matchbox_amulets_part_2_-_inner_sanctum_8b1de758I figured there were a number of you who might have been intrigued by the containment form of adornment this week but thought it would be too much work to get into it. However, I have found a ‘gateway’ tutorial that might just get you addicted to the idea of making container necklaces. Then, you might find yourself moving onto purses or who know what else. In any case, if you like the form, you really should give it a try.

These matchbox amulets, as Tina Holden calls them, address both the inside and outside of this form. They have a slider similar to inros, but a construction that may be a bit more accessible to the novice box maker. She sells a two-part tutorial on her ArtFire page for those of you who want to jump in with pretty much guaranteed success. If you have already played around or you create container adornments, this could be inspiration for a new form.

You can find the two-part tutorial on this link here, or, if you don’t want to dive in wholly at this point, you can get Part 1 here, and then go for Part 2 later when you see just how addictive it is! She has a lot of other tutorials to offer, so if you aren’t up for boxes right now, still stop by her shop to see if something else piques your interest.

*Update: If you want to try your hand at another polymer matchbox design, Randee Ketzel sent this link to an older tutorial where it is opened by moving the outside of the box up the cord rather than pulling the inside up. This would not be ideal to hold loose objects (if the outside gets jostled up, items could fall out) but looks to work great as an amulet with hidden items secured inside. It is free so you can give it a try before you buy something more detailed like Tina’s tutorial: http://www.pcpolyzine.com/2000december/matchbook.html  Thanks for that Randee!

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Read More
If you love these posts ...