Around the World, One Square at a Time
March 16, 2016
Inspirational Art
Have you been keeping track of the Fimo 50 World Project? Its been so cool to watch the tiles come in, posted to the Facebook group, and circulate around the web. We’ve seen some fabulous ones the last week or so. I picked a handful of them to brighten your Monday morning. We have, top left and going clockwise, tile contributions created by Cornelia Brockstedt, Page McNall, Julie Eakes, and Martina Buriánová. How incredibly different can you get? These all started out with the same simple instructions, but the results show very individual inspirations and styles. How wonderful.
If you aren’t too familiar with this project, it is Fimo’s 50th anniversary, and to celebrate they are gathering 10cm x 10cm (4″ x 4″) polymer tiles from polymer artists around the world. Anyone can participate. The submissions will be assembled into a globe that will represent polymer around the world, in a literal and symbolic fashion. Later, the tiles will be taken off and auctioned to raise funds for two of the community’s favorite charity projects, Dr. Ron Lehocky’s Kids Center for Pediatric Therapies and the Samunnat community in Nepal.
For all the specifics, go to the FIMO 50 World Project Facebook page or to the Staedtler website. If you are in the US, Cynthia Tinapple is helping out by allowing US artists to send their tiles to her instead of to Germany, then she will pack those up and send them to Staedtler at the end of April when all tiles are due for the project. US artists can send entries to: Cynthia Tinapple, 1 Hartford Court, Worthington, OH 43085. But remember to register your entry on the website first.
Inspirational Challenge of the Day: Make a 4×4 tile for the Fimo 50World project or just for yourself. The canvas of a simple, open, basically two-dimensional space without the engineering of jewelry or structure needed for sculpture can be a very freeing form to work on. Just give it a try assuming it will be not be shared so you really let go.
___________________________________________
___________________________________________
Pushing Faux Organics
September 2, 2014
Inspirational Art
Another article in the fall issue that could have had a lot more examples in it if we had the room was about playing with faux techniques. The ideas outlined in the article are about emulating something that you find in nature, but adjusting characteristics to create something that doesn’t exist. A number of fantastic artists contributed their versions of this with examples.
Page McNall contributed an example of faux wood. A small faux log to be exact, but that is hardly the end of her beyond-natural faux examples. She is definitely one of those exploratory artists I often talk about, never really settling into one form or style, but does gorgeous work in her variety of approaches. One of her newer explorations that I just love and would have liked to have included are these this faux semi-translucent organics. This is really pushing the idea of natural faux polymer. The pieces look like they could be something in nature, but I’m pretty sure there is nothing quite like the majority of these.
To get a better view of the individual pieces here, as well as her rather fascinating work, visit her Flickr page. And for more ideas on how to play with and push faux techniques, well, see the latest issue of The Polymer Arts!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Air-filled beads
December 5, 2012
Tips and Tricks
I’ve made a few donut beads in my day. I have molds and use up scrap clay to fill the form. But I really like this air-filled technique as posted by Page McNall of Palo Alto, California. A little patience and a light touch seem to be the main ingredients needed to create the nice pillowy curves using this technique.
Page actually shows several approaches to making these on her Flickr page. Here is her technique summary, though:
Leave the large air-filled bead inside the metal cutter and select the location you want to cut the small circle. Slowly depress the cutter until you have sliced through all the layers of clay and remove the small cutter. Clean up the edges using an X-acto knife and a rounded smooth tool like a large knitting needle to smooth any rough edges. Carefully remove the air-filled bead and doctor up and outside edges. Now you are ready to bake your masterpiece. Again, thanks to Cate van Alphen for your ideas to improve on this technique.
Have you been keeping track of the Fimo 50 World Project? Its been so cool to watch the tiles come in, posted to the Facebook group, and circulate around the web. We’ve seen some fabulous ones the last week or so. I picked a handful of them to brighten your Monday morning. We have, top left and going clockwise, tile contributions created by Cornelia Brockstedt, Page McNall, Julie Eakes, and Martina Buriánová. How incredibly different can you get? These all started out with the same simple instructions, but the results show very individual inspirations and styles. How wonderful.
If you aren’t too familiar with this project, it is Fimo’s 50th anniversary, and to celebrate they are gathering 10cm x 10cm (4″ x 4″) polymer tiles from polymer artists around the world. Anyone can participate. The submissions will be assembled into a globe that will represent polymer around the world, in a literal and symbolic fashion. Later, the tiles will be taken off and auctioned to raise funds for two of the community’s favorite charity projects, Dr. Ron Lehocky’s Kids Center for Pediatric Therapies and the Samunnat community in Nepal.
For all the specifics, go to the FIMO 50 World Project Facebook page or to the Staedtler website. If you are in the US, Cynthia Tinapple is helping out by allowing US artists to send their tiles to her instead of to Germany, then she will pack those up and send them to Staedtler at the end of April when all tiles are due for the project. US artists can send entries to: Cynthia Tinapple, 1 Hartford Court, Worthington, OH 43085. But remember to register your entry on the website first.
Inspirational Challenge of the Day: Make a 4×4 tile for the Fimo 50World project or just for yourself. The canvas of a simple, open, basically two-dimensional space without the engineering of jewelry or structure needed for sculpture can be a very freeing form to work on. Just give it a try assuming it will be not be shared so you really let go.
___________________________________________
___________________________________________
Read MoreAnother article in the fall issue that could have had a lot more examples in it if we had the room was about playing with faux techniques. The ideas outlined in the article are about emulating something that you find in nature, but adjusting characteristics to create something that doesn’t exist. A number of fantastic artists contributed their versions of this with examples.
Page McNall contributed an example of faux wood. A small faux log to be exact, but that is hardly the end of her beyond-natural faux examples. She is definitely one of those exploratory artists I often talk about, never really settling into one form or style, but does gorgeous work in her variety of approaches. One of her newer explorations that I just love and would have liked to have included are these this faux semi-translucent organics. This is really pushing the idea of natural faux polymer. The pieces look like they could be something in nature, but I’m pretty sure there is nothing quite like the majority of these.
To get a better view of the individual pieces here, as well as her rather fascinating work, visit her Flickr page. And for more ideas on how to play with and push faux techniques, well, see the latest issue of The Polymer Arts!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
I’ve made a few donut beads in my day. I have molds and use up scrap clay to fill the form. But I really like this air-filled technique as posted by Page McNall of Palo Alto, California. A little patience and a light touch seem to be the main ingredients needed to create the nice pillowy curves using this technique.
Page actually shows several approaches to making these on her Flickr page. Here is her technique summary, though:
Leave the large air-filled bead inside the metal cutter and select the location you want to cut the small circle. Slowly depress the cutter until you have sliced through all the layers of clay and remove the small cutter. Clean up the edges using an X-acto knife and a rounded smooth tool like a large knitting needle to smooth any rough edges. Carefully remove the air-filled bead and doctor up and outside edges. Now you are ready to bake your masterpiece. Again, thanks to Cate van Alphen for your ideas to improve on this technique.
Read More
