An Abundance of Dimensional, Tentacled Dots

August 24, 2013

I wanted to do a post focused on dimensional dots and their variety; but in my search, I found this bit of beautiful insanity and just had to share it. It’s one kind of dimensional dot, but there are so many!

I have a bit of a soft spot for polymer artists who work what we call the “con” circuit–known to muggles as those weird Sci-Fi/Fantasy conventions. That is the arena in which my polymer art sales actually got started. These shows can be wonderfully weird, it’s true,  but they also gather some of the most vibrant and active artistic imaginations on the planet. Even after my art went in another direction, I still participated in a few of these shows each year just to be surrounded by the tremendous talent and intellect as well as discuss the state of art in general; as with polymer, the Science Fiction, Fantasy and Horror art genres are other areas that struggle to be appreciated as true, fine art. Not that the genre arts aren’t appreciated–DragonCon, which occurs every Labor Day weekend in Atlanta, had about 65,000 attendees last year, and Comic Con had to cap their show at 130,000 last year. And these people buy a lot of art! I would sell out or come awfully close at the shows I attended. It’s a fantastic market if you create genre art. But that is a conversation for another day or another magazine article.

Back to this crazy use of dimensional dots … this set of tentacled wonders by Kaity O’Shea was sold at the most recent Comic Con. Talk about a lot of dimensional dotting! I’m amazed at the patience it must have taken to create this, not to mention I’ve been wondering how she held up the forms so nicely while baking!

turquoise_tentacle_set_by_ktoctopus-d68em5v

 

I’m pretty sure she created the tentacles in three sections, with the center swirl latching onto the twining tentacle masses on either side. Can you imagine trying to give someone a hug with this on? You do have to admire the engineering here, even if tentacles are not your thing.

You can see more of Kaity’s cephalopod inspired dimensional dotting on her Deviant Art page and in her Etsy shop.

 

blog Banner Ad 230x125

Revealing Polymer

June 24, 2013

Polymer is a very different craft material for a number of reasons. Of course, the biggest advantage to polymer is undoubtedly its versatility. I mean, it has versatility within its versatile possibilities. What other material allows you to create forms embedded with interior imagery? Of course you will assume that I am talking about caning, which I am — sort of. Caning is just one way of working with polymer that can’t be done as easily or with such versatility with other craft materials. It’s our ability to layer and build with polymer from the inside of a form out, to reshape and manipulate it not just on the surface but within the interior of the forms we work with that gives us so many possibilities.

This layering and building allows for hidden imagery and visual texture that we can fully control. How cool is that? I though this week, we’d look at the various ways polymer can be used to bury and then reveal our visions planted within them.

This bracelet by Silvia Ortiz de la Torre is what got me thinking about this particular aspect of polymer.

4304328319_259ff27ed3

This piece is caning of a sort … at least in the initial build with the polymer. But instead of caning used to create a surface design, the cane is formed into cones with an outside layer developed to be a primary element and the cane cross-section showing as a revealed interior. This use of a cane celebrates its three-dimensionality. It’s not that we don’t realize that the images we make from canes come from a roll that the image follows all the way through its length; but the end product of a cane is usually as a two-dimensional surface design. The depth of the imagery is not a consideration when used this way.

Seeing the design in a cross section makes one consider how deep the design must go. It made me think just how much actual depth polymer often has and how really cool it is that we can use this to create visual textures and patterns, both planned and unexpected, for the work we make. So this week, we’ll just have fun checking out the different ways our fellow clayers reveal this particularly versatile aspect of polymer art.

 

blog Banner Ad 230x125  PA Blog2d--2013-03Mar

An Abundance of Dimensional, Tentacled Dots

August 24, 2013
Posted in

I wanted to do a post focused on dimensional dots and their variety; but in my search, I found this bit of beautiful insanity and just had to share it. It’s one kind of dimensional dot, but there are so many!

I have a bit of a soft spot for polymer artists who work what we call the “con” circuit–known to muggles as those weird Sci-Fi/Fantasy conventions. That is the arena in which my polymer art sales actually got started. These shows can be wonderfully weird, it’s true,  but they also gather some of the most vibrant and active artistic imaginations on the planet. Even after my art went in another direction, I still participated in a few of these shows each year just to be surrounded by the tremendous talent and intellect as well as discuss the state of art in general; as with polymer, the Science Fiction, Fantasy and Horror art genres are other areas that struggle to be appreciated as true, fine art. Not that the genre arts aren’t appreciated–DragonCon, which occurs every Labor Day weekend in Atlanta, had about 65,000 attendees last year, and Comic Con had to cap their show at 130,000 last year. And these people buy a lot of art! I would sell out or come awfully close at the shows I attended. It’s a fantastic market if you create genre art. But that is a conversation for another day or another magazine article.

Back to this crazy use of dimensional dots … this set of tentacled wonders by Kaity O’Shea was sold at the most recent Comic Con. Talk about a lot of dimensional dotting! I’m amazed at the patience it must have taken to create this, not to mention I’ve been wondering how she held up the forms so nicely while baking!

turquoise_tentacle_set_by_ktoctopus-d68em5v

 

I’m pretty sure she created the tentacles in three sections, with the center swirl latching onto the twining tentacle masses on either side. Can you imagine trying to give someone a hug with this on? You do have to admire the engineering here, even if tentacles are not your thing.

You can see more of Kaity’s cephalopod inspired dimensional dotting on her Deviant Art page and in her Etsy shop.

 

blog Banner Ad 230x125

Read More

Revealing Polymer

June 24, 2013
Posted in

Polymer is a very different craft material for a number of reasons. Of course, the biggest advantage to polymer is undoubtedly its versatility. I mean, it has versatility within its versatile possibilities. What other material allows you to create forms embedded with interior imagery? Of course you will assume that I am talking about caning, which I am — sort of. Caning is just one way of working with polymer that can’t be done as easily or with such versatility with other craft materials. It’s our ability to layer and build with polymer from the inside of a form out, to reshape and manipulate it not just on the surface but within the interior of the forms we work with that gives us so many possibilities.

This layering and building allows for hidden imagery and visual texture that we can fully control. How cool is that? I though this week, we’d look at the various ways polymer can be used to bury and then reveal our visions planted within them.

This bracelet by Silvia Ortiz de la Torre is what got me thinking about this particular aspect of polymer.

4304328319_259ff27ed3

This piece is caning of a sort … at least in the initial build with the polymer. But instead of caning used to create a surface design, the cane is formed into cones with an outside layer developed to be a primary element and the cane cross-section showing as a revealed interior. This use of a cane celebrates its three-dimensionality. It’s not that we don’t realize that the images we make from canes come from a roll that the image follows all the way through its length; but the end product of a cane is usually as a two-dimensional surface design. The depth of the imagery is not a consideration when used this way.

Seeing the design in a cross section makes one consider how deep the design must go. It made me think just how much actual depth polymer often has and how really cool it is that we can use this to create visual textures and patterns, both planned and unexpected, for the work we make. So this week, we’ll just have fun checking out the different ways our fellow clayers reveal this particularly versatile aspect of polymer art.

 

blog Banner Ad 230x125  PA Blog2d--2013-03Mar

Read More
If you love these posts ...