Of Polymer and Paint

August 25, 2019

Have you ever used paint on polymer? If so, why did you chose to paint it rather than use the inherent color? This question is at the heart of a kind of prejudice against paint that used to be rather prevalent in the polymer community. I think painting on polymer has found its place in our repertoire of techniques but statistically (and I’m just looking at the stats I have available from the blog and the general response to articles) I don’t think it gets quite the regard that other techniques do and it makes me wonder if people still steer away from it, even when it might be the best choice.

Ages ago, I unintentionally incited a heated conversation about painting on polymer through a blog post where all the color and the focal point of the piece was painted. There were many comments about how painting on polymer was not “working in polymer” and therefore I should not be writing about it on a polymer blog. This sentiment was rooted in the thought that since polymer is already colored, painting would be superfluous if not downright heretical. This was also a time when polymer was fighting for its place in the art world and competitions for polymer were being won by pieces that were not wholly polymer which heavily irritated those who strove to create only with polymer clay. With a strong love for the material, those crafters were simply strong proponents of letting the material shine through.

Well, a material can be gorgeous on its own, but what the artist wants out of that material may be other qualities beyond its inherent visual ones. For instance, I prefer woodwork that has been treated with nothing but oil and wax to let the natural beauty shine through but wood that is stained or painted can result in beautiful work as well. It’s not wrong to change or obscure the wood’s natural look. It’s just different. Polymer has other qualities beyond it’s color, primarily its sculptural characteristics including the ability to hold very fine detail. So, if its sculptural qualities are primarily what the artist needs from the material, then why not use whatever kind of treatment gives the surface the color and feel the artist finds most appealing or fitting for the work?

The fact is, the color in polymer clay only pieces tends to be fairly uniform since we are working with a material which is colored throughout making it fairly difficult to achieve an organic variation and imperfect diffusion of color. On the other hand, paint which is applied in layers can so readily be everything from dense and uniform to translucent and feathery to gritty and splattered. The facts are that it is easy to get smooth, uniform color using polymer clay but can be tricky with paint and it is easy to get variation in a field of color with paint but takes more work than it is often worth to get a similar effect in clay. In other words, each material has its strengths and so why not employ them based on those strengths?

As an artist, one should use the material that suits the end result desired if the material and the skills to use them are available to them. We’re not talking just paint here either—this applies to any material. Sometimes real metal, with its strength and shine, will work better than faux polymer metal or real stones will glimmer and give a piece the needed weight that faux polymer stones cannot. I am not saying that the real thing should always be used though. Faux materials in polymer do have distinct advantages such as faux metal being lighter and more flexible than the real thing and faux stones are usually cheaper to produce and can be formed in ways that real stones cannot.

Ideally, you start designing a piece with the idea of what you want to make, then figure out what materials would be best suited to the look, construction, durability, and cost of the work as well as your skillset and interests. With this approach, you can make the best work possible rather than limiting yourself because you feel some sense of loyalty to a single medium or the tribe of artists that identify themselves by that medium. That loyalty, like not painting color onto polymer, can be unnecessarily limiting and you could be missing out on wonderful new ways to express yourself and create.

The fact is you and your work do not need to be defined by your primary medium. You are an artist or a crafter or an artisan. You can choose to tack a medium on to one of these basic labels in order to be identified by a related community or as a way to explain very succinctly what you do, but if one day you get up and decide you want to try working with something else, are you going to feel locked into that label? Because if you do, you may be less inclined to explore and that would be sad. As I see it, every true artist is an explorer and one that should not be limited by any one material if their path of exploration leads them elsewhere. That’s just my humble opinion!

So, if you think paint would look good on your polymer, I think you should go for it. Let’s look at a handful of artists who combine paint and polymer in ways that polymer alone would not readily be able to create.

 

Color on Color

If you are a fan of Doreen Kassel’s work, you’re probably in love with either her whimsy or her exuberant color. But did you know, she only works with white clay? Or at least this is what she told me a few years back. Polymer is a sculptural medium for her. Its potential color possibilities do not come into play. Instead, she paints her polymer work primarily with oil paints. The wash and translucency of the oil paint layers gives a unique depth and glow to the colors that you just wouldn’t get with polymer alone. Her use of white as the base, like oil on canvas, does much to brighten the colors as well.

 

 

Miniature polymer creation is another area where paint seems to be indispensable. Now, I am no expert in this area but after working with and publishing articles and projects with Stephanie Kilgast, I have learned just how important paint can be for creating lifelike miniature objects. The clay does provide a large amount of the color in Stephanie’s work but painting is what punches up the realism and her amazing sculptures. Highlighting and antiquing play a major role in the realistic look of pieces like this fungi and coral inspired piece.

By the way, if you’re wondering why Stephanie sculpted this on a tin can, it is because she is very active in promoting environmental awareness and uses discarded objects to celebrate “the beauty of nature in a dialogue with humanity, questioning the lost balance between human activities and nature”. If you like what she’s doing you should consider supporting her on Patreon, a platform for supporting artists you admire with a monthly donation of just a couple dollars. You are then given access to privileged information and insight on the artist and his or her work as well as, sometimes, demonstrations and tutorials. Check Stephanie’s page on Patreon here then check out the service in general. There are some really cool artists sharing some really exclusive stuff on this platform.

 

Lorraine Vogel applies paint to the surface of textured polymer clay using stencils. Polymer clay allows her to create textures that gives the paint variation and dimension, an approach that softens the sharp edge and graphic effect that stencil painting often has.

By the way, you can learn the technique in the above pendant from Lorraine’s tutorial in The Polymer Arts’ Winter 2016 issue, available in digital or print on our website of course. Or you can go to her Etsy shop and purchase one of her comprehensive digital tutorials.

 

And I would be remiss if I didn’t point out that in the last issue of The Polymer Studio, Debbie Crothers shows the possibilities of acrylic paint and polymer in a very comprehensive, exploratory article with numerous short tutorials to get you exploring as well. Acrylic pours on polymer is the technique on the beads that grace the cover. The resulting mix of color and its visual texture is just flat out yummy.

 

Although I am talking paint here, the idea that other materials can and should be used on polymer where they can add or express your ideas best extends to all colorants including alcohol inks, pastels, mica powders, iron oxides, or glazes. Most of these other colorants have been better accepted in polymer work, probably because they change the clay color but don’t obscure it the way paint can. But even in traditional paintings, the type of substrate the artist uses to paint on greatly effects the feel and look of the work. Polymer can be a wonderful substrate, especially since its sculptural properties allow for such a great interaction with the paint and such creative potential for the form of the piece.

So, if you’ve been curious about the various effects you can get with paint on polymer or have wondered if you can combine some other material interest such as fiber, metal, paper or whatever, try it! Mess around and explore. Search online to see what others might be doing with these combinations and let their ideas motivate you to try stretch your skills and creative interests.

So, what new material will you be trying out this week or in the very near future?

The Sage Chronicles

My so-called break has yet to feel like a break, I have to admit. There have been some family matters and siblings who need my support and getting the house back together (and getting rid of all this dust!) is slow going as I try to take it easy with the one gimpy arm. So, I still have a full schedule between that, the family stuff, my physical therapy, and my efforts to come up with a plan for returning to production without getting in this state again. You know, some day, I just want to know what it’s like to be bored. Yeah … that’s not likely to happen any time soon.

For those following the saga of the broken drain turned into a major renovation, here’s a photo of the kitchen after I laid in the first line of slate on the backsplash last week so we could at least make the kitchen fully functional and I could get to cooking properly again! I can’t wait until I actually get to start putting in the design on the backsplash. I’ve never done a mosaic project this big but I am excited and so glad I am giving myself the break just now so I can enjoy the process and not rush it. Or not take 6 months or more to complete it!

So, I’m off to rest up now. I hope you have had a great, creative, and inspiring weekend. Here’s to a creative and inspiring week as well!

 

 

Radiating Variety

August 11, 2019

Would you say you creatively lean toward symmetry or asymmetry? Although humans are innately attracted to symmetry, we all lean towards one or the other when it comes to our aesthetic preferences. However, symmetry, which represents order, is generally found to be more pleasing to the brain than asymmetry but, interestingly enough, symmetry alone cannot make something beautiful. That’s because that orderliness can get rather boring.

This is not to say that symmetry is automatically boring, because it certainly is not. It’s all a matter of how much energy the other characteristics of that symmetrical design add to it. However, there is a kind of artistic prejudice against symmetry out there sometimes. It’s this kind of default line of thought that symmetry is not only boring but a kind of cop-out in design, that it is something primarily employed by the inexperienced and unskilled aspiring artist. That always struck me as really ridiculous. Did they think that Mother Nature should rearrange the flowers, the growth of crystals, and the patterns of butterfly wings? Because they are all symmetrical and yet, these are some of the most beautiful natural things in our world.

So, make note that it’s not symmetry that makes a design boring, it’s a lack of energy in the design. Making exciting, energized, and intriguing symmetrical work can actually be challenging so when someone does it well, it can be quite impressive. Asymmetry has an innate sense of energy simply because it is off-balance and our brain, the way it is, always thinks things are moving towards balance and thus sees asymmetrical design as something in flux. So really, asymmetry might be considered a kind of a shortcut to an energized design although, in truth, both symmetry and asymmetry have plenty of challenges to contend with when designing.

There is one type of symmetrical design, however, that does have both balance and energy almost automatically included. This is the beautiful radial symmetry seen in nature in everything from starfish to flowers to snowflakes. Its energy comes from lines or a progression of shapes moving out from a central axis. The movement in this kind of symmetry is strong and directional but it can still verge on the boring if the radiating lines do not have variation.

Let’s look at some examples of beautifully done radial symmetry.

 

Going Around the Axis

We see radial symmetry in polymer all the time, particularly in kaleidoscope canes. The process of slicing and reassembling the canes with the same point in the pattern arranged at the center creates radial symmetry. There aren’t necessarily radiating lines in these canes, but the mirrored shapes tend to create points or a kind of visual growth outward.

Here’s a beautiful five-sided kaleidoscope cane – yes, symmetry can have an and odd number of sides because the design is still consistent around a central axis – whose parts have a sense of growth moving outward. This is by the very adept cane artist Lana Fominicheva of LaFom on Etsy.

 

A more direct production of radial symmetry can be created by building with a collection of elements such as in this quilled cane design by Meg Newberg of Polymer Clay Workshop.

Cool canes, right? You can get Meg’s Quilled Cane Tutorial in her Esty shop and get to making your own as soon as you download it!

 

Radial symmetry that is neither straight nor separate lines or progressive shapes can still create energy and interest while still staying symmetrical and beautifully balanced as seen here in this locket by Ola of PinkLaLou on Etsy. The crossing over of the lines in the central image are highly energetic and flow out more than burst out from the central axis but flowing lines are still energized only in a calmer, perhaps more elegant, way.

This is a locket created with filigree and cold enamel, not polymer. At first, I thought maybe the design in the middle was cold enamel, but I think it may be an image under resin. Cold enamel is a pigmented semi-translucent resin created to look like traditional glass enamel. If you love the look of enamel but have neither the equipment nor the patience to learn that amazing craft, cold enamel might fill the bill for you. But in the meantime, you could start a radial symmetry design with the right graphic using a liquid polymer image transfer.

 

Okay, so now that you’ve seen a few examples, would you say this next piece below is radial symmetry? Scroll down before reading on and just take a quick peek. Its looks like it is, right?

Well, technically no, it isn’t, but it has all the initial markers with a central axis from which elements radiate outward in a similar pattern. However, nothing is actually symmetrical from one side to the other. Our brain perceives balance because the progression from the center feels consistent, going from radiating lines of inlaid polymer to an even boundary of solid silver to a filigree of swirls and set gems that fill the outside perimeter. But all the elements have an irregular placement, especially in the stones and swirls outside of the focal center but also in the thickness, pattern, and coloring of the inlaid polymer. So, this pendant echoes radial symmetry without being symmetrical thus giving it a tremendous amount of energy without feeling chaotic. Pretty cool!

This necklace, of course, is a Liz Hall creation. Liz has been one of my polymer heroes since nearly the beginning of my exploration into the material. She combines precious metal clay with polymer inlays, adding in stones, glass, and other shiny bits here and there as well. Her openness to other materials allows for this broad range of exploration in design and yet she has a very distinctive style. If you look closely at her work, you’ll see every regular pattern and design is just a touch off, including the pendant that opens this blog post. That’s part of her signature style. Simple but effective.

 

Of course, the most quintessential of radial symmetry design is the mandala. Much of the radial symmetry we see could be considered mandalas of sorts, if we are just speaking of the geometry of it. Mandalas are, however, traditionally a reference to a kind of spiritual map, one that was originally meant to be a model for the organizational structure of life, in both the physical and metaphysical sense, and consisted of a square with a circle and four T-shaped gates, one facing each side of the square. But, as you might have noticed, that definition and the base design has been broadly extended. As long as the design has a regular structure organized around a unifying center, it seems to be generally accepted that it can be called a mandala.

We see these mandala structures in polymer pieces created with cane slices a lot but it is also readily achieved with layered polymer elements like these layered ornaments Kay Miller used to make. She’s off focused on dimensional greeting cards now but we can still enjoy the images of her perfectly designed and finished ornaments.

 

Mandalas are certainly not relegated to polymer when it comes to artwork. And it’s not just about those dot painted rocks that are all the rage now either. Take a gander at this gorgeous mandala brooch created by Jima and Carlie Abbott of Mixed Metal Jewels.

So… do you use radial symmetry in your work? If you don’t or haven’t done much of it or simply haven’t thought much about it, maybe it’s time to try it out. It can be very meditative. See for yourself!

 

Best Laid Plans

Well, this week I was going to start casually working on plans for future publications and new projects between physical therapy and catching up on sleep, but chaos reigned here at the house. Again. There was light at the end of the tunnel when we suddenly went from being a couple of days from finishing the house renovations to a couple of weeks.

The appliances were in and the final painting had commenced but then we discovered that the floor had a problem along with more damage than was anticipated so instead of simply repairing our flooring around the construction areas, we had to tear out nearly half the flooring in our house! Talk about frustrating! And depressing. And nerve-racking. Blah.

But, long story short, we worked it and persisted until we found something we could afford and miraculously ended up with this gorgeous acacia wood flooring and a crew that rushed in and got it all taken care of pretty much in one day! It was nuts. There were so many guys here, it was like ants in the house. But it was by far the best work done on this whole project. Here is my husband Brett, just super excited about his new floors, in our nearly done kitchen.

 

I’m pretty sure his expression will change when we sit down to pay the bill though. But at least we can drown our sorrows over a glass of wine in a gorgeous new kitchen.

Or a glass of seltzer in my case. My metabolic issues are dampening my potential to celebrate or drown my sorrows in my family’s traditional Irish way. No sugars including alcohol for me for a while, not until my metabolic issues are under control and it’ll be minimal even then. It’s sad but it’s really nothing compared to what some of my other friends are going through right now. All you wonderful people … take good care of yourselves! I don’t want any more troubling health news. Ok?

On the positive side, my arm is much better even after this one week with minimal computer time. It is starting to hurt now though, but only because I keep forgetting to not type! Three decades of writing for a living and it’s hard not to use the keyboard when pain is not there to readily remind me not to. I’ll learn!

So, the word now is that we should have our house back in a week. Then I can start cooking properly and really button-down on the new diet regimen I have. So, keep your fingers and toes crossed for us as I will keep good, positive energy and prayers flowing out to all of you with challenges going on right now.

Have a beautiful, creative, and inspiring week!

Crosswise Crafts

Heather Campbell – “Keep Circling”

If you read this blog because polymer is your primary art material, do you consider yourself a polymer artist or a mixed-media artist? This question has arisen in a few conversations recently – how to identify oneself as an artist – and also in regard to the content of these blogs posts because a lot of people that are writing me of late have turned out not to be primarily polymer artists, or at least identify themselves as mixed-media rather than polymer artists. I think that’s really cool and I don’t find it terribly surprising that people who work in other art materials are interested in polymer because polymer has so much crossover and such a wide range of possible applications.

I mean, is polymer clay the only material in your art studio? Aside from maybe dedicated caners, I think the majority of us who identify as polymer artists also have drawers and bins and boxes of other things like beads, fabric, paints, paper, resin, and so much more. So, is your polymer art really a type of mixed-media art? And what is mixed-media art really anyways?

And most of all… do the labels really matter?

Labels are important for the purpose of organizing all the information we are inundated with daily, but unfortunately, it also puts people and concepts in restrictive boxes and that can become problematic. When someone is labeled (or calls themselves) a polymer artist, it doesn’t mean that they work only with polymer or even primarily with polymer. They may simply have an affinity for the material more than any other single material.

Not only do we use a lot of other materials in polymer work, but we can also so readily draw inspiration from looking at artwork in materials. I, myself, find fiber art to be an immense resource for ideas in my polymer work, especially modern quilting, so I thought I’d bring you along to explore some of the ways today’s quilt art and polymer creatively crossover.

Crosswise Crafts

Quilt art is a form of fiber art which pushes beyond functional bedcovers and quilted clothing of the past. Fiber Art itself is a relatively recent term, first used shortly after World War II to categorize fine art using natural or synthetic fiber as the material. This speaks to how relatively new the focus has been on fiber as an art form. Luckily, the term quickly worked its way out of the relatively elite world of curators and art historians into a more generalized use encompassing all fiber-based artistic applications, from weaving and quilting to intensely detailed embroidery and monumental outdoor installations.

There has been a tremendous amount of experimentation going on in fiber arts since the latter decades of the twentieth century, something as polymer artists we understand and applaud but, unlike polymer the many forms of fiber art draw from some of mankind’s oldest crafts so experimentation tends to rally not around techniques but around form, nontraditional materials, unusual use and placement of materials, and conceptual approaches, especially those involving cultural issues and activism. This makes it a rich source of inspiration that can really light the way for new possibilities in polymer.

As I’m sure you know, not only do we emulate fiber in polymer, we also have methods of construction and layout with veneers and inlays which use basically the same approach as quilting, less the sewing. Both art forms also technically work in three-dimensions but are commonly composed in two-dimensions which is why I think it’s such a great arena to look to for a creative shot in the arm.

Here is a very direct example of the crossover between quilting and polymer. Lindly Haunani draws the patterns for her polymer quilts directly from classic quilt patterns, like this one based on a half square quilt design.

She uses these wall pieces to examine and teach color. She also applies the concepts to brooches like these lovely pieces.

By the way, Lindly has a series of workshops teaching color through the creation of veneers and polymer quilts coming up in late August/early September at Creative Journey Studios. You can check those out here.

 

Although classic quilt patterns pop up in polymer quite often, contemporary quilts are nothing like these. Here is an example of traditional quilting techniques but without the traditional patterns by Lisa Jenni. Do the colors or composition poke at your creative brain but with polymer on the mind? It could be an arrangement with alcohol ink dyed polymer, striped canes, and stamped clay medallions, right?

 

That quilt reminds me a little bit of Gera Scott Chandler’s work. The colors and the emphasis on oblong circles are probably the connections but you see how one could possibly inspire the other, yes?

 

And how have we not seen something like this piece below done in polymer? This is embroidered quilting by Susan Lenz It’s less than 3’ x 2’ so such a piece in polymer would not be a monumental task. This has given me an idea … I think I know what I’m going to do with all the inchies collected over the years. Let’s all make wall pieces from our collections!

Be sure to look at Susan’s Lancet window series too. They have a similarly open layout but in kind of stained-glass patterns.

 

Contemporary quilts, like polymer, are not restricted to a two-dimensional canvas or flat layers. There are a lot of things being added into and onto quilts today. Just look at this riot of wonder by Molly Jean Hobbit.

Does this piece bring to mind any polymer artists who also use lots of pieces and materials in their work? Maybe Laurie Mika, Heather Campbell (as seen in the opening image), or even Christi Friesen with her mixed-media mosaics? If you have always liked what these ladies are doing, just imagine the fresh batch of ideas you could get from contemporary quilts.

Want to really delve into the quilt world now? You go down a rabbit hole by simply putting “quilt art” into Pinterest, or you could start on the Contemporary Quilt Art associations gallery pages. Click on each image to get a whole slew of additional quilts by various artists. It’s quite the fabulous (and possibly time gobbling) rabbit hole to go down.

Want to do a little polymer quilting of your own today? Well, you could sit down to this video by Jan Montarsi, demonstrating how to make striped polymer quilt squares. Mind you, he uses his new Create Template, but you could do it without the template if you want to get right to it. If you have the latest edition of The Polymer Studio, Issue #3, go to Jan’s article on multicolor blends first to make some really bright and saturated blended sheets to work with. If you didn’t subscribe or purchase your copy yet, you can get an immediate digital download or order a print edition on the website here. And you can get Jan’s templates here.

 

Where Two Crafts Collide – working with the Craft Industry Alliance

So, my curiosity about this mixed media labeling question pushed me to do some research early last month and, in the process, I found the Craft Industry Alliance. This is a fairly new organization – it was created in 2015 – but it is growing quite quickly as an information and supportive advocacy trade association for all working craft artists – this includes you!

I really liked that this organization recognizes craft art as a broader community that is not segregated by material or form. Since the founders are primarily fiber artist, however, it started out heavy in that arena, but they are actively growing into other communities. I know this because the president of CIA (gosh, their acronym sounds so covert!) contacted me after I joined their organization online with an earnest request to get to know the polymer community better. After a lovely chat and a few emails, we are now working on polymer based content for the Alliance. How cool is that?

So, what is this organization and what might it do for you? Well, here is the skinny, straight from President, Abby Glassenberg:

Craft Industry Alliance is a community of craft professionals. Strengthen your creative business, stay up to date on industry news, and build connections within a supportive trade association. Artists who are interested in becoming teachers of their craft, writing books, and showing their work in galleries need to think about setting up a solid business foundation from which to grow. Marketing and branding, legal, accounting and tax issues, social media and blogging … these are all issues creative business owners need to think through. Don’t do it alone! Come together with 1,300+ fellow members in a supportive community where you can find solid answers to your questions, make connections with the right people, and find the resources you need. Check it out at https://www.craftindustryalliance.org  

As you can see, the organization is focused on active artists who show and sell their work or promote themselves as teachers or writers. It doesn’t really matter how small or how big your creative operation is, you’ll always benefit from a little help and I think it’s a fantastic idea to have a community of people from all areas of craft supporting each other. I’ve always been a little worried that the polymer community has remained a bit insular since we have issues that few other material arenas have, being such a very young material, working with a plastic in an environmentally sensitive world, and battling the “kids art material” image. But growth in this community will come from the outside, not from within so the more we reach out and network with other craft artists and the larger craft community, the more energized and innovative we will be as a whole and that will keep the community growing and vital.

The Sage Sabbatical

So, as most of you probably know by now, August starts my little sabbatical from production work on print publications so I can attend to some health issues. I have to admit, it’s made me a little depressed. It’s just rather sudden and I’m such a workaholic and so used to having a deadline hanging over me all the time so it’s a little unnerving. Luckily, it actually started out busy since we wrapped up the release of The Polymer Studio Issue #3. It turned out just beautiful and we’ve already received so many great comments on it with particular excitement around articles like the fascinating story of Brazil’s polymer master, Beatriz Cominatto, Debbie Crothers’ acrylic and polymer exploration, and Jan’s multi-color skinner blend techniques.

If you’re waiting on your copy, the digital edition went out on the 31st – check spam/junk mail folders if you’re due one and didn’t see it in your inbox. Print editions went to the post office this past Wednesday, so they are on the way too. I have my batch of stock here if you need to order it. Just go to the website.

We also added a Special 3 issue Package of all three of The Polymer Studio issues if you need to do some catching up.

If you’re unfamiliar with my silly little situation that forced me into taking time off, you can find the more-or-less full story in our most recent newsletter here.

If you don’t get our twice a month newsletter, signing up for the newsletter is one of the best ways to stay informed on our publications and new projects, of which there will be something before the year ends even if I can’t do print! But yes, I promise I will not overextend myself and do with the doctor orders!

Speaking of which … I should go now. I hope you are excited by the peek at quilts and the connection to polymer. Have a wonderful rest of your weekend and an inspired week!

Asymmetrical Matchmaking

May 26, 2019

What earring camp of design are you in? Do you always make earrings that match, or do you occasionally create a mismatched pair? Or are you one of those rare birds that abhors the symmetry of a matched pair and avoids it completely? I have lately come to the conclusions that I am a bit tired of matching earring. I couldn’t say why but I’ve started grabbing just one of two different pairs and wearing those as a set. My decisions, however, are not random. I have a lot of earrings with similar designs or techniques and I choose the new pairing with an eye to there being some kind of recognizable connection between the newly partnered set because recognizable connection is what makes a pair of earrings a match.

Design is all about making connections for the viewer of the work. It’s about developing a relationship physically, visually, or conceptually between the elements of an item (or set) so that people see the work as cohesive and intentional. That doesn’t mean that everything needs to literally match or mirror, as it is often done with earrings. People seem to think earrings in a pair need to match unless you’re going for some funky or edgy aesthetic.

However, I’d like to show you that earrings can be created unmatched or asymmetrical and still look contemporary, sophisticated, or otherwise just fabulous. There is a whole range of things you can do to throw off the symmetry between a pair of earrings. It can be subtle like a color change or rearrangement of the same elements, or it can be extreme like a size or visual weight difference. Regardless of the chosen differences, the earrings in a well-designed unmatched set will feel related in some fashion, often having several matching elements but not symmetry between them but it could also be that they are complete opposites or are unrelated visually but are grouped in our mind through common concepts. Let’s go on and I’ll explain.

 

Creative Match Making

Let’s start with subtle mismatching in our matchmaking of earrings. This can be done by changing just one aspect. Color is easy to change up, but it can also get complicated as there are characteristics of color itself that need to be matched to make two different colors work together such as saturation and value. If you have a great grasp of color, then try that out. Otherwise, you might start with something a little more straightforward like size, shape, or texture.

Here is a brilliant example by Bettina Welker. These earrings are sophisticated but relatively simple in design. They get a boost of energy by the simple but discordant change of texture in the pair.

 

Placement is also an easy way to throw they symmetry off while keeping the same visual weight and size, aspects that can help ensure the earrings look like they belong together. This pair from Jagna Birecka does just that in a very simple way. She just turned the first order of strung elements upside down for the second earring. The fact that both end elements are round makes the changeup not quite as jarring or wonky as it could be while still being immediately noticeable.

 

When the color palette and primary shapes are the same, it really doesn’t matter where the elements land on an earring. If the color palette feels the same and some other big design elements such as shape and size are equivalent, you can change up the placement of the pattern and the balance of color between the pair and they will look quite matched and sophisticated. This set by Nikolina Ortzan is a great example of that. She uses the same set of colors in each earring (and the pendant) and has nothing but circular shapes so you might not even notice that they are not the same but you certainly feel the energy the disparity exudes.

If you like this kind of mismatch, peruse through Nikolina’s Flickr photostream. She employs this approach quite a lot and very successfully.

 

Concepts, not just visual elements, can create the connected relationship between the pair in an earring set. It was hard to find really great sets in polymer (it’s not like people are hash tagging #ConceptuallyMishmatchedPolymerEarrings on Instagram) so let me demonstrate conceptual relationships with a couple of other materials.

For instance, the classic Moon and Sun icons are easily recognized as related and are often used in jewelry. In this enamel and gem set pair by Diego Percossi Papi, the designer also ensured a recognizable relationship by using the same style and types details. The curved and very pointed ends of the moon echo the wavy and very pointed ends of the sun. The colors and materials used also remain consistent between the two. There is also a consideration of balance. Even though they are visually quite different forms, they feel equal. As Diego puts it. “The moon is longer to compensate for the sun that weighs more in color and size. The sun would be much more invasive, with its large areas of enamel, which is a form of balance and respect for the moon.”

 

The great thing about conceptual relationships is that you can really stretch the differences visually and have few, if any, commonalities between the two earrings if the concept is strong. Take this xylophone and its hammer. We know they belong together, that they come as a set so the instrument can be played and so they “match” conceptually. These cute fabricated earrings by Candyflaps and Sprinkles are made from vintage xylophone parts, and can still be played!

 

Combine conceptual images and strong design elements and it might take a second for people to realize that they are unmatched. Luann Udell’s Shaman Mask earrings are the same size and shape and are both faux ivory and well as being face masks, However, the faces have different expressions and shading. They are similar enough in how they are rendered and in what they are to give them a strong relationship on top of the already strong connection in shape.

You can also develop a relationship between two different earrings when they are two halves of one thing, such as this scene that spans the pair of polymer earrings created by Tishaia. Each earring is well composed on its own but creates a little scene when side by side. She has more obvious halves too which you can find on her Instagram page. I just thought this one was gorgeously done. 

 

Mix and Match

Okay … ready to mismatch some earring sets? Isn’t it just great to give yourself permission to go unmatched?

Understanding that earrings in a set should have some commonality, you can easily create new sets, maybe even from elements you already have. Pull out your box or bin or drawer of unused elements and start mixing and matching. Lay out beads and other pieces in sets when you find elements that have at least a couple of matching or related color palettes, shapes, sizes, or other design elements and see how you like them as earring pairs. I bet you’ll find at least a few. You can strengthen their connection by using the same spacer beads, dangles and/or findings in the final construction of the earrings. Lay these options out and see what you come up with.

You can even take the beads that are alike and change up the spacers and findings to give them some of that asymmetrical energy. Dangles are particularly effective. You can even add dangles to just one side, like Valeria of Jewellry for World on Etsy does here.

 

If you want to change up your findings, learning to make your own unique ear wires is a great place to start mixing it up. Here is an easy tutorial from Janet Liu of Crystals and Clay, with 5 designs to get you jumpstarted on creating your own ear wires or it might be a good refresher if you haven’t done it in a while.

 

For Love of Hot Water

Who is tired of hearing about my house drama? I think I am! This week we lost the use of our one working shower when something got sucked into the hot water line and killed the old show faucet. The glamping quickly turned into a more standard camping experience as running water and showers were absent most of the week. Luckily, we have family nearby so there were trips made just for showers!

On a positive note, we are also now in the “putting things back together” stage. This past week was all running pipes and gas lines and new electrical in the walls and attic. Nothing photo worthy. But, whew! Nice to be past the destruction phase. We get to start drywalling next week. Very exciting!

Yesterday was the first truly nice day since this all started. High of 73F and sunny! Much time was spent out in the yard. But today we have a high of 58F and its spitting rain. The wildly varying temperature range reminds me of Colorado (where we’d say “Don’t like the weather? Wait 15 minutes.”) who just got walloped by a winter storm this past week. Weather is just being funky this year. Is it out of whack where you are too?

 

Well, I hope that, regardless of the weather, you have time to hit the studio to mismatch and have fun trying out earring combinations. Or just getting time to play. For my US readers, enjoy your family and friends on this Memorial Day and take a little time out to remember the folks who gave their lives defending and fighting for us and for others around the globe. Have a great coming week!

 

 

 

 

Simply Stunning

Tanya Mayorova

Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.

I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.

With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.

Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.

A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.

 

Beads Beyond the Basic

Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.

Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.

Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.

 

Tanya doesn’t have a tutorial posted for this, but I can help you with that:

  1. Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
  2. Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
  3. Carefully blend the seam where the ends meet.
  4. If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
  5. Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
  6. You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.

Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.

 

The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.

I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.

Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.

 

Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.

These are created by Rebekah Payne who generously posted a tutorial here on how to make them.

 

A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..

 

You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.

 

The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!

Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.

 

Beads Away!

The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.

There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.

  • My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
  • Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
  • If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
  • Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
  • For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.

 

Holes

Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!

For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.

There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!

However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts

 

Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!

Tile Talk

May 12, 2019

Do you ever stop to ask yourself if what you create makes you happy? It seems like a silly question since creating is usually passion driven so being able to feed that passion should make you happy, right? But have you ever found yourself creating something because you believe it is the kind of thing other people would like but later realize that you don’t enjoying making it?

I found that happened a lot when I was a selling artist. You get wrapped up in what you think the market would want, what you think will sell best at the next show, and you’d be just making things for the money and not because it’s what you want to make. Other times we think that in a particular material, like polymer clay, it is best used for certain forms such as jewelry and home decor. But as we all know, polymer can do almost anything and yet 85% of it being created and shared online is jewelry. Jewelry is pretty fun stuff to make, sure, but if you enjoy polymer, just keep in mind you don’t have to make jewelry.

I myself have been moving away from jewelry. A pendant or pair of earrings are oftentimes still the best items to create to show off a polymer technique for a magazine article or tutorial but more and more, I create objects without an end goal in mind and am really enjoying just making little objects and samples of techniques. Last year, I started to see patterns and connections between them and eventually started putting them in shadow boxes. You can see an example of one of my “specimen” boxes in the latest Polymer Journeys book, if you’re curious. I’m also trying to devise a class for doing it. It’s so much fun!

But when I have to create jewelry because I am vetting an article for the magazine or want to make a gift, I have lately found that I don’t look forward to the engineering of it – figuring out how it is going to hang, what stringing material will work best, what findings I need, as well as worrying about comfort and durability. I find I don’t want to think about those things when I create and it’s not out of some kind of laziness, it’s just not what I want to spend my mental and creative energy on, and I’m good with that. I just really want to follow creative paths that make me happy right now.

To that end (and because I’ve spent so much time in tile stores lately), I’ve decided I might just focus on tiles for a while. They are a very freeing form. A tile is just a canvas for 3D materials. You can do whatever you want on them. You can make them any size, any shape, and can attach whatever you want or attack it however you want. I think we really should all give ourselves the freedom to play with this form, to let ourselves be free to create from the heart with a material we love. At the end of a session of tile making, you may find you are really looking forward to creating necklaces or making beads or covering vases. But I am going to suggest you give a tile a try here and there to just let yourself create freely. Doing this can help with your designs in other forms.

To that end, of course, I’m going to share some tiles this weekend. I am going to share a lot of non-polymer ones because I think, if you’ve spent any time online, you’ve probably seen your share of polymer tiles these last few years, especially with the Fimo 50 year challenge a couple of years back and with the common inches exchanges (inches are just tiny tiles). So, I’ve got a quite a mix for you but it is all art that can translate to polymer even if it is in another material.

 

Laying it All Out

The opening image of this post is a photo from a class conducted by Laurie Mika. She is well-known for her colorful and intricate collage/mosaic pieces which, by the way, she teaches at various events. This collection of student work was from a polymer clay tapestry class she taught at the SAMA (Society of American Mosaic Artists) conference in Nashville just a few of weeks ago. They are all just lovely. There is no high-end technical skill needed to put these types of things together which makes them ideal for exploring color and texture and just letting yourself go. (You can check Laurie’s workshop schedule on her website.)

Jael Thorp caught my eye some years back with her “clay doodles”, including the one below. I thought they looked like zentangles for clayers. Can you imagine the flow state she must’ve been in to create this? You can just get so completely lost in this kind of work and that is a big part of why people find tiles such a wonderful creative outlet.

Check out this post with her various doodles from some years back. She went on to refine her technique, making beautiful beads and home decor with the same type of application. You can find them on her Flickr photostream.

 

Let’s move from polymer to ceramics now. It is a rare thing in ceramics that can’t be replicated in some fashion in polymer so I find ceramic art quite inspiring. Here is one of my favorite tile makers in ceramics, Chris Gryder, who has gone a bit more three-dimensional of late but his tile compositions are timeless.

In this composition, each tile is its own separate piece but he’s connected them all with these lines that he creates through the grid of tiles. So, really, you can make a whole bunch of tiles without worrying about what they’re going to end up as, and then, if you want to put them together as a composition because they have a similar or complementary set of color palettes, textures, or motifs, you can use lines that flow throughout to visually connect them for a larger composite composition. This approach would allow you to just make tiles as the muse directs and then you can later make them into a larger wall piece.

If you like this piece, go browse through his website or his Instagram page for more fantastic inspiring wall compositions in tile.

 

Keep in mind, just because tiles start out flat, they are not two-dimensional and you can create extremely three-dimensional pieces on them. Here’s one example with some very organic forms and textures created by Lauren Blakey, another ceramic artist.

 

And here’s another three-dimensional example in glass by Shayna Leib.

As you can see, tile work is open to all types of materials so keep that in mind as you sit down to tile. Mix in anything that your heart and muse desires. Mix and match mediums, embed oddball trinkets you’ve kept for, as yet, unknown reasons, and just keep an open mind.

After pulling these examples for you, I realized that all the examples are squares here. You don’t have to create square tiles to play with but that is the more common form. However, if you’re not feeling square, try a free form shape or an oblong one or maybe, because today is Mother’s Day, create a big heart for all the mothers out there. Happy Mother’s Day to all you amazing women!

Here’s a heart from Tina Ruppert of Wisecrackin’ Mosaics on Etsy. Pick a favorite shape and a bunch of canes or other scraps of clay and you can do something along these lines as well.

 

Getting Squared Away

I’m going to leave you with these thoughts and hopefully some curiosity about playing around with a tile or two, in whatever form and techniques interest you. If you need some jumpstart tutorials, here are a few places you can go:

Sara Evans has a video about her tile making process here – https://www.youtube.com/watch?v=9FAxYwgJfLo

If you want to do something tile like but still want it to be something functional when done, maybe you would like this polymer clay tile box tutorial –

https://mermaidsden.com/blog/2015/02/12/polymer-clay-tile-box

Or have fun with one of our true masters of polymer clay tiles, Chris Kapono, with her very detailed and yet tremendously fun tile project in the Polymer Arts Projects book which you can purchase and download digitally if you need it immediately or order the print edition from our website.

I opened with a discussion about doing what makes you happy and hope it gives you some food for thought. If you want to hear a couple of transformative stories in that vein, please be sure to get your copy of The Polymer Studio Issue #2, recently released, which starts and ends with stories about finding one’s happy place with one about Christine Dumont’s studio complete with a visual tour, and the other about Donna Greenberg’s focus moving from jewelry to large wall art. Check out the Issue #2 Sampler if you haven’t seen the new issues yet.

 

We’re daily trying to find are happy place over here as our house has continued to be demolished more and more, beyond what we (or our contractor) expected even. Old plumbing can be a tricky thing! If it would just warm up here, it wouldn’t be so bad. A cold Southern California in May is just weird.

I’d share progress shots of the house but it’s pretty much just down to studs and busted up concrete floors. Oh… And a large trench across the whole of the front yard for a new drain line. I’m thinking about making it into a moat. Like a habitrail (if you remember those hamster houses) for our pond fish. They could just swim circles around the house! Okay, probably not but gotta have fun with all this bedlam, even if it’s just dreaming up nonsense like that!

I hope you all have a wonderful Sunday and Mother’s Day! I’m off to have mimosas with the family’s fabulous females myself! Enjoy the day and your coming week!

Splitting the Difference

April 21, 2019

Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night  … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)

So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.

I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!

So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?

 

Splitting the Canvas

Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.

For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.

 

Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)

Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.

This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.

 

And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.

 

Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.

 

You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.

 

 

Splitting up is Not Hard to Do

If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!

Here is a simple series of steps you can try right now … A Cane Split Canvas:

  1. Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
  2. Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
  3. Burnish the canes into the clay sheet so the surface is smooth.
  4. Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
  5. Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
  6. Once you find the section you like, cover it with plastic wrap and cut with your cutter.
  7. Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.

Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.

You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.

Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!

 

Now for the Great Tile Adventure

Story time! For those entertained by the little dramas of my little life.

So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!

Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.

So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!

Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!

I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!

So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.

All It’s Cracked Up To Be

March 17, 2019

What is it about weathered and worn surfaces that so many people find attractive these days? Mind you, I am very much one of them. I have a whole line of work called “Beautiful Decay” that explores the beauty I find in the deterioration of durable materials. But the one related effect that seems to be everywhere these days is crackling. Who doesn’t love a good crackle! From shabby chic furniture to crazed ceramics to crackle glass decor, the look of a deteriorating surface seems to have wide-ranging appeal.

Knowing that, it’s not really a surprise that crackle is so popular as a polymer technique. A great many of us are already texture fiends and, if you love texture then you are going to try crackle- so there’s one of the reasons for its popularity in polymer. But we also know that there is a market for work with crackled surfaces since it pops up in so many areas related to decoration and adornment, making it a safe bet if you sell your work.

There is no one right or best way to create a crackled surface in polymer. You may not have realized it, but there are literally dozens of ways to create crackle. It can be created with a crackle paint medium, partially cured layers of polymer (like I show you in my Controlled Crackle technique which you can find in your Fall 2011 edition of The Polymer Arts), dried paint (or glaze or gilders’ paste or floor wax) on raw clay, metal leaf on raw clay, leaching, alcohol treatments, or by creating a faux texture with impressed materials. And I know I am still missing a few in that list!

So, let’s enjoy some crackle work today and wrap up with a few tutorials on different crackle techniques that you can try out.

 

Let’s Get Cracking

One of my personal favorite “cracklers” is Staci Louise Smith. She uses a number of different techniques to achieve a wide range of cracked texture. In the necklace below, her crackle is not subtle. It is not evenly spread across her beads either but rather, it is rough and tumble and scattered in energetic horizontal lines. Her soft coloring calms the chaos of the crackle which is also balanced out by the many other purposeful accents and lines from the wire.

Staci can also do subtle as evidenced by the opening piece, a Balance Bowl from her tutorial in the Polymer Art Projects – Organic book. (You can get the book on our website if you want to make one of these stunning bowls.)

Check out this blog post where she shares how she makes the necklace here along with sketches and her thoughts on the process.

 

A subtle crackle can often take a bit more patience but what a lovely effect it can have. It may not even be obvious at first that the beads on this necklace below by Ursa Polak have a crackle surface, but the weathered feel comes across immediately. Take a close look to see all the fine-lined cracks that add to the depth and variation of the surface.

 

Kroma Crackle is a lovely gel medium that itself dries and cracks without having to stretch the clay and yet remains flexible so that you can manipulate the clay without the cracked material popping off. Once you worked with it for a bit you can control the size of the crackle pretty well. You can add small amounts of acrylic paint or mica powders to give yourself a wide variety of color options. You can also apply paints, inks, dyes and other colorants on it after its dry.

These earrings are by Els van Haasen uses Kroma Crackle on polymer. You can see how regular a crackle you can get with this medium. But it can definitely be quite varied once you come to understand how to use it.

 

You almost forget that the technique that was most commonly used by the highly esteemed Elise Winters, who we lost just this year, was also a crackle technique. Her work was very controlled, as was crackle but that was probably the most recognizable part about her signature style. I can only imagine the work she put into gaining such control over her crackle, but it just shows what can be done when we invest a bit of patience into our work. (I erroneously put in that this was metal leaf when I first posted but, no, it’s paint, which also takes such skilled control, having to ensure that the paint is evenly applied to get such fine crackle.)

 

This is actually a piece of mine from some years back. It includes alcohol treated raw clay, controlled cracking of partially cured clay, and metal leaf colored with alcohol ink. The alcohol treatment is a way of drying out the surface of raw clay to get a very fine crazing. It’s a bit of a tricky technique but it sure worked here. That helped create the uneven surface of the partially cured polymer under the metal leaf, giving it a burning ember look.

 

Let’s Crack You Up

Ready to try some various cracking techniques? Here are a few freebies to get you going:

If you want to try the straightforward Paint Crackle Techniques:

  • Grab a craft acrylic (the cheap acrylics work better than artist tube acrylics which tend to stretch rather than crack) or tempera paint and a well-conditioned sheet of polymer rolled on the thickest setting of your pasta machine.
  • Brush a moderate (not heavy) layer of the paint onto the polymer. Wait for it to completely dry.
  • Then roll it through the pasta machine set at two settings down from the thickness you created the sheet on. You can stop here or, for wider, more varied crackle, turn the sheet 90°, adjust the pasta machine down another one or two settings and run it through again.
  • You should have a nice crackle now but if your paint is stretching rather than cracking, rolling another sheet of polymer and lay the crackle sheet on top and then start rolling it through the pasta machine again. Eventually, the paint will crack but sometimes you need a really thick layer of polymer to start in order to stretch it far enough. Tempera paint won’t stretch and cracks very nicely if you have that on hand or fancy a run to your local craft store. You could also get some crackle medium while you’re out and follow the instructions to crackle paint directly on your raw polymer clay.

You can find some examples of the use of different paints on this post by Jan Geisen.

For more tutorials online:

  • One of the things I didn’t show you in the samples above was how to use impression material to create a faux crackle effect. I use crumpled aluminum foil for this and then use the antiquing approach of rubbing acrylic paint into the cracks after its cured and wiping it off. But Katie Oskin has an interesting material to share in this online tutorial, as well as showing the effect of painting it before she impresses it.
  • In this video tutorial, Sandy Huntress shows you how to crackle very thin sheets of partially cured polymer clay.
  • Crackling can be done on round surfaces too! Here’s an online tutorial using metal leaf on bicone beads to create crackle. Keep in mind you could do the same thing by painting the beads and then rolling them around to get it crack.

Do you know of other great crackle tutorials or want to point out another crackling technique I didn’t mention? Drop a comment below (if you’re on this post’s page online) or click on the title of this post to go to the post’s page and share the info with us all. It would be much appreciated!

 

Bits of News

 

Okay… Off with me. Working on the next issue of The Polymer Studio. Get your subscription or catch up if you didn’t get the first issue by just jumping over to the website now.

Know that your purchases and subscriptions help me pay the bills so I can justify the time I put into sharing all the good stuff on this blog. Help me help you as we collectively feed our addiction to polymer!

Have a wonderful and creative week! –Sage

 

Hole-y Design

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Of Polymer and Paint

August 25, 2019
Posted in

Have you ever used paint on polymer? If so, why did you chose to paint it rather than use the inherent color? This question is at the heart of a kind of prejudice against paint that used to be rather prevalent in the polymer community. I think painting on polymer has found its place in our repertoire of techniques but statistically (and I’m just looking at the stats I have available from the blog and the general response to articles) I don’t think it gets quite the regard that other techniques do and it makes me wonder if people still steer away from it, even when it might be the best choice.

Ages ago, I unintentionally incited a heated conversation about painting on polymer through a blog post where all the color and the focal point of the piece was painted. There were many comments about how painting on polymer was not “working in polymer” and therefore I should not be writing about it on a polymer blog. This sentiment was rooted in the thought that since polymer is already colored, painting would be superfluous if not downright heretical. This was also a time when polymer was fighting for its place in the art world and competitions for polymer were being won by pieces that were not wholly polymer which heavily irritated those who strove to create only with polymer clay. With a strong love for the material, those crafters were simply strong proponents of letting the material shine through.

Well, a material can be gorgeous on its own, but what the artist wants out of that material may be other qualities beyond its inherent visual ones. For instance, I prefer woodwork that has been treated with nothing but oil and wax to let the natural beauty shine through but wood that is stained or painted can result in beautiful work as well. It’s not wrong to change or obscure the wood’s natural look. It’s just different. Polymer has other qualities beyond it’s color, primarily its sculptural characteristics including the ability to hold very fine detail. So, if its sculptural qualities are primarily what the artist needs from the material, then why not use whatever kind of treatment gives the surface the color and feel the artist finds most appealing or fitting for the work?

The fact is, the color in polymer clay only pieces tends to be fairly uniform since we are working with a material which is colored throughout making it fairly difficult to achieve an organic variation and imperfect diffusion of color. On the other hand, paint which is applied in layers can so readily be everything from dense and uniform to translucent and feathery to gritty and splattered. The facts are that it is easy to get smooth, uniform color using polymer clay but can be tricky with paint and it is easy to get variation in a field of color with paint but takes more work than it is often worth to get a similar effect in clay. In other words, each material has its strengths and so why not employ them based on those strengths?

As an artist, one should use the material that suits the end result desired if the material and the skills to use them are available to them. We’re not talking just paint here either—this applies to any material. Sometimes real metal, with its strength and shine, will work better than faux polymer metal or real stones will glimmer and give a piece the needed weight that faux polymer stones cannot. I am not saying that the real thing should always be used though. Faux materials in polymer do have distinct advantages such as faux metal being lighter and more flexible than the real thing and faux stones are usually cheaper to produce and can be formed in ways that real stones cannot.

Ideally, you start designing a piece with the idea of what you want to make, then figure out what materials would be best suited to the look, construction, durability, and cost of the work as well as your skillset and interests. With this approach, you can make the best work possible rather than limiting yourself because you feel some sense of loyalty to a single medium or the tribe of artists that identify themselves by that medium. That loyalty, like not painting color onto polymer, can be unnecessarily limiting and you could be missing out on wonderful new ways to express yourself and create.

The fact is you and your work do not need to be defined by your primary medium. You are an artist or a crafter or an artisan. You can choose to tack a medium on to one of these basic labels in order to be identified by a related community or as a way to explain very succinctly what you do, but if one day you get up and decide you want to try working with something else, are you going to feel locked into that label? Because if you do, you may be less inclined to explore and that would be sad. As I see it, every true artist is an explorer and one that should not be limited by any one material if their path of exploration leads them elsewhere. That’s just my humble opinion!

So, if you think paint would look good on your polymer, I think you should go for it. Let’s look at a handful of artists who combine paint and polymer in ways that polymer alone would not readily be able to create.

 

Color on Color

If you are a fan of Doreen Kassel’s work, you’re probably in love with either her whimsy or her exuberant color. But did you know, she only works with white clay? Or at least this is what she told me a few years back. Polymer is a sculptural medium for her. Its potential color possibilities do not come into play. Instead, she paints her polymer work primarily with oil paints. The wash and translucency of the oil paint layers gives a unique depth and glow to the colors that you just wouldn’t get with polymer alone. Her use of white as the base, like oil on canvas, does much to brighten the colors as well.

 

 

Miniature polymer creation is another area where paint seems to be indispensable. Now, I am no expert in this area but after working with and publishing articles and projects with Stephanie Kilgast, I have learned just how important paint can be for creating lifelike miniature objects. The clay does provide a large amount of the color in Stephanie’s work but painting is what punches up the realism and her amazing sculptures. Highlighting and antiquing play a major role in the realistic look of pieces like this fungi and coral inspired piece.

By the way, if you’re wondering why Stephanie sculpted this on a tin can, it is because she is very active in promoting environmental awareness and uses discarded objects to celebrate “the beauty of nature in a dialogue with humanity, questioning the lost balance between human activities and nature”. If you like what she’s doing you should consider supporting her on Patreon, a platform for supporting artists you admire with a monthly donation of just a couple dollars. You are then given access to privileged information and insight on the artist and his or her work as well as, sometimes, demonstrations and tutorials. Check Stephanie’s page on Patreon here then check out the service in general. There are some really cool artists sharing some really exclusive stuff on this platform.

 

Lorraine Vogel applies paint to the surface of textured polymer clay using stencils. Polymer clay allows her to create textures that gives the paint variation and dimension, an approach that softens the sharp edge and graphic effect that stencil painting often has.

By the way, you can learn the technique in the above pendant from Lorraine’s tutorial in The Polymer Arts’ Winter 2016 issue, available in digital or print on our website of course. Or you can go to her Etsy shop and purchase one of her comprehensive digital tutorials.

 

And I would be remiss if I didn’t point out that in the last issue of The Polymer Studio, Debbie Crothers shows the possibilities of acrylic paint and polymer in a very comprehensive, exploratory article with numerous short tutorials to get you exploring as well. Acrylic pours on polymer is the technique on the beads that grace the cover. The resulting mix of color and its visual texture is just flat out yummy.

 

Although I am talking paint here, the idea that other materials can and should be used on polymer where they can add or express your ideas best extends to all colorants including alcohol inks, pastels, mica powders, iron oxides, or glazes. Most of these other colorants have been better accepted in polymer work, probably because they change the clay color but don’t obscure it the way paint can. But even in traditional paintings, the type of substrate the artist uses to paint on greatly effects the feel and look of the work. Polymer can be a wonderful substrate, especially since its sculptural properties allow for such a great interaction with the paint and such creative potential for the form of the piece.

So, if you’ve been curious about the various effects you can get with paint on polymer or have wondered if you can combine some other material interest such as fiber, metal, paper or whatever, try it! Mess around and explore. Search online to see what others might be doing with these combinations and let their ideas motivate you to try stretch your skills and creative interests.

So, what new material will you be trying out this week or in the very near future?

The Sage Chronicles

My so-called break has yet to feel like a break, I have to admit. There have been some family matters and siblings who need my support and getting the house back together (and getting rid of all this dust!) is slow going as I try to take it easy with the one gimpy arm. So, I still have a full schedule between that, the family stuff, my physical therapy, and my efforts to come up with a plan for returning to production without getting in this state again. You know, some day, I just want to know what it’s like to be bored. Yeah … that’s not likely to happen any time soon.

For those following the saga of the broken drain turned into a major renovation, here’s a photo of the kitchen after I laid in the first line of slate on the backsplash last week so we could at least make the kitchen fully functional and I could get to cooking properly again! I can’t wait until I actually get to start putting in the design on the backsplash. I’ve never done a mosaic project this big but I am excited and so glad I am giving myself the break just now so I can enjoy the process and not rush it. Or not take 6 months or more to complete it!

So, I’m off to rest up now. I hope you have had a great, creative, and inspiring weekend. Here’s to a creative and inspiring week as well!

 

 

Read More

Radiating Variety

August 11, 2019
Posted in

Would you say you creatively lean toward symmetry or asymmetry? Although humans are innately attracted to symmetry, we all lean towards one or the other when it comes to our aesthetic preferences. However, symmetry, which represents order, is generally found to be more pleasing to the brain than asymmetry but, interestingly enough, symmetry alone cannot make something beautiful. That’s because that orderliness can get rather boring.

This is not to say that symmetry is automatically boring, because it certainly is not. It’s all a matter of how much energy the other characteristics of that symmetrical design add to it. However, there is a kind of artistic prejudice against symmetry out there sometimes. It’s this kind of default line of thought that symmetry is not only boring but a kind of cop-out in design, that it is something primarily employed by the inexperienced and unskilled aspiring artist. That always struck me as really ridiculous. Did they think that Mother Nature should rearrange the flowers, the growth of crystals, and the patterns of butterfly wings? Because they are all symmetrical and yet, these are some of the most beautiful natural things in our world.

So, make note that it’s not symmetry that makes a design boring, it’s a lack of energy in the design. Making exciting, energized, and intriguing symmetrical work can actually be challenging so when someone does it well, it can be quite impressive. Asymmetry has an innate sense of energy simply because it is off-balance and our brain, the way it is, always thinks things are moving towards balance and thus sees asymmetrical design as something in flux. So really, asymmetry might be considered a kind of a shortcut to an energized design although, in truth, both symmetry and asymmetry have plenty of challenges to contend with when designing.

There is one type of symmetrical design, however, that does have both balance and energy almost automatically included. This is the beautiful radial symmetry seen in nature in everything from starfish to flowers to snowflakes. Its energy comes from lines or a progression of shapes moving out from a central axis. The movement in this kind of symmetry is strong and directional but it can still verge on the boring if the radiating lines do not have variation.

Let’s look at some examples of beautifully done radial symmetry.

 

Going Around the Axis

We see radial symmetry in polymer all the time, particularly in kaleidoscope canes. The process of slicing and reassembling the canes with the same point in the pattern arranged at the center creates radial symmetry. There aren’t necessarily radiating lines in these canes, but the mirrored shapes tend to create points or a kind of visual growth outward.

Here’s a beautiful five-sided kaleidoscope cane – yes, symmetry can have an and odd number of sides because the design is still consistent around a central axis – whose parts have a sense of growth moving outward. This is by the very adept cane artist Lana Fominicheva of LaFom on Etsy.

 

A more direct production of radial symmetry can be created by building with a collection of elements such as in this quilled cane design by Meg Newberg of Polymer Clay Workshop.

Cool canes, right? You can get Meg’s Quilled Cane Tutorial in her Esty shop and get to making your own as soon as you download it!

 

Radial symmetry that is neither straight nor separate lines or progressive shapes can still create energy and interest while still staying symmetrical and beautifully balanced as seen here in this locket by Ola of PinkLaLou on Etsy. The crossing over of the lines in the central image are highly energetic and flow out more than burst out from the central axis but flowing lines are still energized only in a calmer, perhaps more elegant, way.

This is a locket created with filigree and cold enamel, not polymer. At first, I thought maybe the design in the middle was cold enamel, but I think it may be an image under resin. Cold enamel is a pigmented semi-translucent resin created to look like traditional glass enamel. If you love the look of enamel but have neither the equipment nor the patience to learn that amazing craft, cold enamel might fill the bill for you. But in the meantime, you could start a radial symmetry design with the right graphic using a liquid polymer image transfer.

 

Okay, so now that you’ve seen a few examples, would you say this next piece below is radial symmetry? Scroll down before reading on and just take a quick peek. Its looks like it is, right?

Well, technically no, it isn’t, but it has all the initial markers with a central axis from which elements radiate outward in a similar pattern. However, nothing is actually symmetrical from one side to the other. Our brain perceives balance because the progression from the center feels consistent, going from radiating lines of inlaid polymer to an even boundary of solid silver to a filigree of swirls and set gems that fill the outside perimeter. But all the elements have an irregular placement, especially in the stones and swirls outside of the focal center but also in the thickness, pattern, and coloring of the inlaid polymer. So, this pendant echoes radial symmetry without being symmetrical thus giving it a tremendous amount of energy without feeling chaotic. Pretty cool!

This necklace, of course, is a Liz Hall creation. Liz has been one of my polymer heroes since nearly the beginning of my exploration into the material. She combines precious metal clay with polymer inlays, adding in stones, glass, and other shiny bits here and there as well. Her openness to other materials allows for this broad range of exploration in design and yet she has a very distinctive style. If you look closely at her work, you’ll see every regular pattern and design is just a touch off, including the pendant that opens this blog post. That’s part of her signature style. Simple but effective.

 

Of course, the most quintessential of radial symmetry design is the mandala. Much of the radial symmetry we see could be considered mandalas of sorts, if we are just speaking of the geometry of it. Mandalas are, however, traditionally a reference to a kind of spiritual map, one that was originally meant to be a model for the organizational structure of life, in both the physical and metaphysical sense, and consisted of a square with a circle and four T-shaped gates, one facing each side of the square. But, as you might have noticed, that definition and the base design has been broadly extended. As long as the design has a regular structure organized around a unifying center, it seems to be generally accepted that it can be called a mandala.

We see these mandala structures in polymer pieces created with cane slices a lot but it is also readily achieved with layered polymer elements like these layered ornaments Kay Miller used to make. She’s off focused on dimensional greeting cards now but we can still enjoy the images of her perfectly designed and finished ornaments.

 

Mandalas are certainly not relegated to polymer when it comes to artwork. And it’s not just about those dot painted rocks that are all the rage now either. Take a gander at this gorgeous mandala brooch created by Jima and Carlie Abbott of Mixed Metal Jewels.

So… do you use radial symmetry in your work? If you don’t or haven’t done much of it or simply haven’t thought much about it, maybe it’s time to try it out. It can be very meditative. See for yourself!

 

Best Laid Plans

Well, this week I was going to start casually working on plans for future publications and new projects between physical therapy and catching up on sleep, but chaos reigned here at the house. Again. There was light at the end of the tunnel when we suddenly went from being a couple of days from finishing the house renovations to a couple of weeks.

The appliances were in and the final painting had commenced but then we discovered that the floor had a problem along with more damage than was anticipated so instead of simply repairing our flooring around the construction areas, we had to tear out nearly half the flooring in our house! Talk about frustrating! And depressing. And nerve-racking. Blah.

But, long story short, we worked it and persisted until we found something we could afford and miraculously ended up with this gorgeous acacia wood flooring and a crew that rushed in and got it all taken care of pretty much in one day! It was nuts. There were so many guys here, it was like ants in the house. But it was by far the best work done on this whole project. Here is my husband Brett, just super excited about his new floors, in our nearly done kitchen.

 

I’m pretty sure his expression will change when we sit down to pay the bill though. But at least we can drown our sorrows over a glass of wine in a gorgeous new kitchen.

Or a glass of seltzer in my case. My metabolic issues are dampening my potential to celebrate or drown my sorrows in my family’s traditional Irish way. No sugars including alcohol for me for a while, not until my metabolic issues are under control and it’ll be minimal even then. It’s sad but it’s really nothing compared to what some of my other friends are going through right now. All you wonderful people … take good care of yourselves! I don’t want any more troubling health news. Ok?

On the positive side, my arm is much better even after this one week with minimal computer time. It is starting to hurt now though, but only because I keep forgetting to not type! Three decades of writing for a living and it’s hard not to use the keyboard when pain is not there to readily remind me not to. I’ll learn!

So, the word now is that we should have our house back in a week. Then I can start cooking properly and really button-down on the new diet regimen I have. So, keep your fingers and toes crossed for us as I will keep good, positive energy and prayers flowing out to all of you with challenges going on right now.

Have a beautiful, creative, and inspiring week!

Read More

Crosswise Crafts

August 4, 2019
Posted in ,

Heather Campbell – “Keep Circling”

If you read this blog because polymer is your primary art material, do you consider yourself a polymer artist or a mixed-media artist? This question has arisen in a few conversations recently – how to identify oneself as an artist – and also in regard to the content of these blogs posts because a lot of people that are writing me of late have turned out not to be primarily polymer artists, or at least identify themselves as mixed-media rather than polymer artists. I think that’s really cool and I don’t find it terribly surprising that people who work in other art materials are interested in polymer because polymer has so much crossover and such a wide range of possible applications.

I mean, is polymer clay the only material in your art studio? Aside from maybe dedicated caners, I think the majority of us who identify as polymer artists also have drawers and bins and boxes of other things like beads, fabric, paints, paper, resin, and so much more. So, is your polymer art really a type of mixed-media art? And what is mixed-media art really anyways?

And most of all… do the labels really matter?

Labels are important for the purpose of organizing all the information we are inundated with daily, but unfortunately, it also puts people and concepts in restrictive boxes and that can become problematic. When someone is labeled (or calls themselves) a polymer artist, it doesn’t mean that they work only with polymer or even primarily with polymer. They may simply have an affinity for the material more than any other single material.

Not only do we use a lot of other materials in polymer work, but we can also so readily draw inspiration from looking at artwork in materials. I, myself, find fiber art to be an immense resource for ideas in my polymer work, especially modern quilting, so I thought I’d bring you along to explore some of the ways today’s quilt art and polymer creatively crossover.

Crosswise Crafts

Quilt art is a form of fiber art which pushes beyond functional bedcovers and quilted clothing of the past. Fiber Art itself is a relatively recent term, first used shortly after World War II to categorize fine art using natural or synthetic fiber as the material. This speaks to how relatively new the focus has been on fiber as an art form. Luckily, the term quickly worked its way out of the relatively elite world of curators and art historians into a more generalized use encompassing all fiber-based artistic applications, from weaving and quilting to intensely detailed embroidery and monumental outdoor installations.

There has been a tremendous amount of experimentation going on in fiber arts since the latter decades of the twentieth century, something as polymer artists we understand and applaud but, unlike polymer the many forms of fiber art draw from some of mankind’s oldest crafts so experimentation tends to rally not around techniques but around form, nontraditional materials, unusual use and placement of materials, and conceptual approaches, especially those involving cultural issues and activism. This makes it a rich source of inspiration that can really light the way for new possibilities in polymer.

As I’m sure you know, not only do we emulate fiber in polymer, we also have methods of construction and layout with veneers and inlays which use basically the same approach as quilting, less the sewing. Both art forms also technically work in three-dimensions but are commonly composed in two-dimensions which is why I think it’s such a great arena to look to for a creative shot in the arm.

Here is a very direct example of the crossover between quilting and polymer. Lindly Haunani draws the patterns for her polymer quilts directly from classic quilt patterns, like this one based on a half square quilt design.

She uses these wall pieces to examine and teach color. She also applies the concepts to brooches like these lovely pieces.

By the way, Lindly has a series of workshops teaching color through the creation of veneers and polymer quilts coming up in late August/early September at Creative Journey Studios. You can check those out here.

 

Although classic quilt patterns pop up in polymer quite often, contemporary quilts are nothing like these. Here is an example of traditional quilting techniques but without the traditional patterns by Lisa Jenni. Do the colors or composition poke at your creative brain but with polymer on the mind? It could be an arrangement with alcohol ink dyed polymer, striped canes, and stamped clay medallions, right?

 

That quilt reminds me a little bit of Gera Scott Chandler’s work. The colors and the emphasis on oblong circles are probably the connections but you see how one could possibly inspire the other, yes?

 

And how have we not seen something like this piece below done in polymer? This is embroidered quilting by Susan Lenz It’s less than 3’ x 2’ so such a piece in polymer would not be a monumental task. This has given me an idea … I think I know what I’m going to do with all the inchies collected over the years. Let’s all make wall pieces from our collections!

Be sure to look at Susan’s Lancet window series too. They have a similarly open layout but in kind of stained-glass patterns.

 

Contemporary quilts, like polymer, are not restricted to a two-dimensional canvas or flat layers. There are a lot of things being added into and onto quilts today. Just look at this riot of wonder by Molly Jean Hobbit.

Does this piece bring to mind any polymer artists who also use lots of pieces and materials in their work? Maybe Laurie Mika, Heather Campbell (as seen in the opening image), or even Christi Friesen with her mixed-media mosaics? If you have always liked what these ladies are doing, just imagine the fresh batch of ideas you could get from contemporary quilts.

Want to really delve into the quilt world now? You go down a rabbit hole by simply putting “quilt art” into Pinterest, or you could start on the Contemporary Quilt Art associations gallery pages. Click on each image to get a whole slew of additional quilts by various artists. It’s quite the fabulous (and possibly time gobbling) rabbit hole to go down.

Want to do a little polymer quilting of your own today? Well, you could sit down to this video by Jan Montarsi, demonstrating how to make striped polymer quilt squares. Mind you, he uses his new Create Template, but you could do it without the template if you want to get right to it. If you have the latest edition of The Polymer Studio, Issue #3, go to Jan’s article on multicolor blends first to make some really bright and saturated blended sheets to work with. If you didn’t subscribe or purchase your copy yet, you can get an immediate digital download or order a print edition on the website here. And you can get Jan’s templates here.

 

Where Two Crafts Collide – working with the Craft Industry Alliance

So, my curiosity about this mixed media labeling question pushed me to do some research early last month and, in the process, I found the Craft Industry Alliance. This is a fairly new organization – it was created in 2015 – but it is growing quite quickly as an information and supportive advocacy trade association for all working craft artists – this includes you!

I really liked that this organization recognizes craft art as a broader community that is not segregated by material or form. Since the founders are primarily fiber artist, however, it started out heavy in that arena, but they are actively growing into other communities. I know this because the president of CIA (gosh, their acronym sounds so covert!) contacted me after I joined their organization online with an earnest request to get to know the polymer community better. After a lovely chat and a few emails, we are now working on polymer based content for the Alliance. How cool is that?

So, what is this organization and what might it do for you? Well, here is the skinny, straight from President, Abby Glassenberg:

Craft Industry Alliance is a community of craft professionals. Strengthen your creative business, stay up to date on industry news, and build connections within a supportive trade association. Artists who are interested in becoming teachers of their craft, writing books, and showing their work in galleries need to think about setting up a solid business foundation from which to grow. Marketing and branding, legal, accounting and tax issues, social media and blogging … these are all issues creative business owners need to think through. Don’t do it alone! Come together with 1,300+ fellow members in a supportive community where you can find solid answers to your questions, make connections with the right people, and find the resources you need. Check it out at https://www.craftindustryalliance.org  

As you can see, the organization is focused on active artists who show and sell their work or promote themselves as teachers or writers. It doesn’t really matter how small or how big your creative operation is, you’ll always benefit from a little help and I think it’s a fantastic idea to have a community of people from all areas of craft supporting each other. I’ve always been a little worried that the polymer community has remained a bit insular since we have issues that few other material arenas have, being such a very young material, working with a plastic in an environmentally sensitive world, and battling the “kids art material” image. But growth in this community will come from the outside, not from within so the more we reach out and network with other craft artists and the larger craft community, the more energized and innovative we will be as a whole and that will keep the community growing and vital.

The Sage Sabbatical

So, as most of you probably know by now, August starts my little sabbatical from production work on print publications so I can attend to some health issues. I have to admit, it’s made me a little depressed. It’s just rather sudden and I’m such a workaholic and so used to having a deadline hanging over me all the time so it’s a little unnerving. Luckily, it actually started out busy since we wrapped up the release of The Polymer Studio Issue #3. It turned out just beautiful and we’ve already received so many great comments on it with particular excitement around articles like the fascinating story of Brazil’s polymer master, Beatriz Cominatto, Debbie Crothers’ acrylic and polymer exploration, and Jan’s multi-color skinner blend techniques.

If you’re waiting on your copy, the digital edition went out on the 31st – check spam/junk mail folders if you’re due one and didn’t see it in your inbox. Print editions went to the post office this past Wednesday, so they are on the way too. I have my batch of stock here if you need to order it. Just go to the website.

We also added a Special 3 issue Package of all three of The Polymer Studio issues if you need to do some catching up.

If you’re unfamiliar with my silly little situation that forced me into taking time off, you can find the more-or-less full story in our most recent newsletter here.

If you don’t get our twice a month newsletter, signing up for the newsletter is one of the best ways to stay informed on our publications and new projects, of which there will be something before the year ends even if I can’t do print! But yes, I promise I will not overextend myself and do with the doctor orders!

Speaking of which … I should go now. I hope you are excited by the peek at quilts and the connection to polymer. Have a wonderful rest of your weekend and an inspired week!

Read More

Asymmetrical Matchmaking

May 26, 2019
Posted in

What earring camp of design are you in? Do you always make earrings that match, or do you occasionally create a mismatched pair? Or are you one of those rare birds that abhors the symmetry of a matched pair and avoids it completely? I have lately come to the conclusions that I am a bit tired of matching earring. I couldn’t say why but I’ve started grabbing just one of two different pairs and wearing those as a set. My decisions, however, are not random. I have a lot of earrings with similar designs or techniques and I choose the new pairing with an eye to there being some kind of recognizable connection between the newly partnered set because recognizable connection is what makes a pair of earrings a match.

Design is all about making connections for the viewer of the work. It’s about developing a relationship physically, visually, or conceptually between the elements of an item (or set) so that people see the work as cohesive and intentional. That doesn’t mean that everything needs to literally match or mirror, as it is often done with earrings. People seem to think earrings in a pair need to match unless you’re going for some funky or edgy aesthetic.

However, I’d like to show you that earrings can be created unmatched or asymmetrical and still look contemporary, sophisticated, or otherwise just fabulous. There is a whole range of things you can do to throw off the symmetry between a pair of earrings. It can be subtle like a color change or rearrangement of the same elements, or it can be extreme like a size or visual weight difference. Regardless of the chosen differences, the earrings in a well-designed unmatched set will feel related in some fashion, often having several matching elements but not symmetry between them but it could also be that they are complete opposites or are unrelated visually but are grouped in our mind through common concepts. Let’s go on and I’ll explain.

 

Creative Match Making

Let’s start with subtle mismatching in our matchmaking of earrings. This can be done by changing just one aspect. Color is easy to change up, but it can also get complicated as there are characteristics of color itself that need to be matched to make two different colors work together such as saturation and value. If you have a great grasp of color, then try that out. Otherwise, you might start with something a little more straightforward like size, shape, or texture.

Here is a brilliant example by Bettina Welker. These earrings are sophisticated but relatively simple in design. They get a boost of energy by the simple but discordant change of texture in the pair.

 

Placement is also an easy way to throw they symmetry off while keeping the same visual weight and size, aspects that can help ensure the earrings look like they belong together. This pair from Jagna Birecka does just that in a very simple way. She just turned the first order of strung elements upside down for the second earring. The fact that both end elements are round makes the changeup not quite as jarring or wonky as it could be while still being immediately noticeable.

 

When the color palette and primary shapes are the same, it really doesn’t matter where the elements land on an earring. If the color palette feels the same and some other big design elements such as shape and size are equivalent, you can change up the placement of the pattern and the balance of color between the pair and they will look quite matched and sophisticated. This set by Nikolina Ortzan is a great example of that. She uses the same set of colors in each earring (and the pendant) and has nothing but circular shapes so you might not even notice that they are not the same but you certainly feel the energy the disparity exudes.

If you like this kind of mismatch, peruse through Nikolina’s Flickr photostream. She employs this approach quite a lot and very successfully.

 

Concepts, not just visual elements, can create the connected relationship between the pair in an earring set. It was hard to find really great sets in polymer (it’s not like people are hash tagging #ConceptuallyMishmatchedPolymerEarrings on Instagram) so let me demonstrate conceptual relationships with a couple of other materials.

For instance, the classic Moon and Sun icons are easily recognized as related and are often used in jewelry. In this enamel and gem set pair by Diego Percossi Papi, the designer also ensured a recognizable relationship by using the same style and types details. The curved and very pointed ends of the moon echo the wavy and very pointed ends of the sun. The colors and materials used also remain consistent between the two. There is also a consideration of balance. Even though they are visually quite different forms, they feel equal. As Diego puts it. “The moon is longer to compensate for the sun that weighs more in color and size. The sun would be much more invasive, with its large areas of enamel, which is a form of balance and respect for the moon.”

 

The great thing about conceptual relationships is that you can really stretch the differences visually and have few, if any, commonalities between the two earrings if the concept is strong. Take this xylophone and its hammer. We know they belong together, that they come as a set so the instrument can be played and so they “match” conceptually. These cute fabricated earrings by Candyflaps and Sprinkles are made from vintage xylophone parts, and can still be played!

 

Combine conceptual images and strong design elements and it might take a second for people to realize that they are unmatched. Luann Udell’s Shaman Mask earrings are the same size and shape and are both faux ivory and well as being face masks, However, the faces have different expressions and shading. They are similar enough in how they are rendered and in what they are to give them a strong relationship on top of the already strong connection in shape.

You can also develop a relationship between two different earrings when they are two halves of one thing, such as this scene that spans the pair of polymer earrings created by Tishaia. Each earring is well composed on its own but creates a little scene when side by side. She has more obvious halves too which you can find on her Instagram page. I just thought this one was gorgeously done. 

 

Mix and Match

Okay … ready to mismatch some earring sets? Isn’t it just great to give yourself permission to go unmatched?

Understanding that earrings in a set should have some commonality, you can easily create new sets, maybe even from elements you already have. Pull out your box or bin or drawer of unused elements and start mixing and matching. Lay out beads and other pieces in sets when you find elements that have at least a couple of matching or related color palettes, shapes, sizes, or other design elements and see how you like them as earring pairs. I bet you’ll find at least a few. You can strengthen their connection by using the same spacer beads, dangles and/or findings in the final construction of the earrings. Lay these options out and see what you come up with.

You can even take the beads that are alike and change up the spacers and findings to give them some of that asymmetrical energy. Dangles are particularly effective. You can even add dangles to just one side, like Valeria of Jewellry for World on Etsy does here.

 

If you want to change up your findings, learning to make your own unique ear wires is a great place to start mixing it up. Here is an easy tutorial from Janet Liu of Crystals and Clay, with 5 designs to get you jumpstarted on creating your own ear wires or it might be a good refresher if you haven’t done it in a while.

 

For Love of Hot Water

Who is tired of hearing about my house drama? I think I am! This week we lost the use of our one working shower when something got sucked into the hot water line and killed the old show faucet. The glamping quickly turned into a more standard camping experience as running water and showers were absent most of the week. Luckily, we have family nearby so there were trips made just for showers!

On a positive note, we are also now in the “putting things back together” stage. This past week was all running pipes and gas lines and new electrical in the walls and attic. Nothing photo worthy. But, whew! Nice to be past the destruction phase. We get to start drywalling next week. Very exciting!

Yesterday was the first truly nice day since this all started. High of 73F and sunny! Much time was spent out in the yard. But today we have a high of 58F and its spitting rain. The wildly varying temperature range reminds me of Colorado (where we’d say “Don’t like the weather? Wait 15 minutes.”) who just got walloped by a winter storm this past week. Weather is just being funky this year. Is it out of whack where you are too?

 

Well, I hope that, regardless of the weather, you have time to hit the studio to mismatch and have fun trying out earring combinations. Or just getting time to play. For my US readers, enjoy your family and friends on this Memorial Day and take a little time out to remember the folks who gave their lives defending and fighting for us and for others around the globe. Have a great coming week!

 

 

 

 

Read More

Simply Stunning

May 19, 2019
Posted in , ,

Tanya Mayorova

Given the choice, would you create a necklace that was easy and quick to make and was still stunning, or would you explore an unknown technique with an unknown outcome that might take hours or days? For some of you, the answer may be complicated because you like to explore and you don’t even question how long it will take or whether you will be successful because you just want to see what material can do. I get that. That’s pretty much how I approach what I do. Not that I wouldn’t mind some of my explorations being quick and easy and more often successful than not. Being challenged and failing, though, are absolutely necessary parts of creating art but that doesn’t mean that everything we make should be frustrating and difficult.

I think, by default, we all gravitate toward the easy option when given a clear-cut choice. Easy means less frustration, less room for error, and less time involved but it can also be considered a bad choice. And I’m not just talking about the creative process. For instance, you might grab a paper plate instead of one that you have to wash, or you toss your groceries in a plastic bag provided by the store rather than bringing in your own reusable one. Those examples highlight the reason for our environmental issues right now, our desire for ease and convenience being at the root of our environmental tragedies. So, yes, taking the easy route can sometimes have a negative effect that that’s not always true. There is nothing wrong with choosing the easiest route to drive home or having yoga pants and a T-shirt as your default attire when not at work. And some very easy things are actually better. Fruit and a boiled egg for breakfast is a lot easier than making pancakes and bacon and is better for you too. And when creating your polymer components, simple techniques and forms are often not only an efficient way to create and express yourself but they allow you to concentrate on composition, contrast, form, and other design elements rather than getting you wrapped up in technique.

With social media and our online access to so much artwork, I think our minds are saturated with certain ideas about what we should be creating and, because of that, we may have a hard time finding our own voice or we may have an unconscious sense of how pieces should look or be put together rather than finding a look of our own. Or we are romanced by gorgeous, complex pieces so we try to make our work more complex as well without knowing if simple elements may be very thing we need to do or say what we want.

Part of the problem comes from the idea that simple and easy means boring. But it certainly doesn’t have to be. To illustrate this, I’d like to look at beads today. In polymer jewelry, the bead is the most basic element you work with. The idea of a bead encompasses all types of forms though, from the simple round bead to complex sculpted and layered mixed-media elements. But let’s explore the more classic idea of a bead, as a single element that is repeated in some fashion in a piece of adornment and let’s see how you might create easy beads that are anything but basic and boring.

A little note … Some of you long time polymer enthusiasts out there may recognize a few of these pieces as several were widely circulated back when but, even if you’ve seen these before, look at them with new eyes and see if some familiar techniques but unused techniques aren’t worth a revisit now. You’ll approach them differently than you did 5 or 10 years ago, and you never know what serendipitous discovery might be unearthed.

 

Beads Beyond the Basic

Round beads are, of course, the most common bead form and are a classic that are always great for showing off canes, color, and surface design. Still, round beads can get pretty complicated, one, because it can be difficult to make them perfectly round, and secondly, because to keep them from being boring often leads us to add complexity in the color scheme or how the surface is treated. But what if you took your round bead and just worked on the form? Go ahead … grab some clay, make a rough round bead, and then start messing with the form. Pinch it, press it, pull it, or roll it into a variation on a round bead or cure and carve it.

Genevieve Williamson started out with a round bead to create these side textured chunky disks. Just look at the variation here plus I bet you can think up a few other ways to quickly and easily change them up with different clays, inclusions, or texturing of the sides.

Tube beads can be a tad tricky, primarily when it comes to creating the hole for stringing them. An extruder with a core adapter makes the job much easier but you can also create easy, attractive, and unique tube beads from any surface treated clay sheet simply by wrapping a strip around a tube of your choosing. Here’s a whole selection by Tonya Mayorova who went really wide with her bead openings. As you can see, all kind of surface treatments adapt well to these wide tube beads, from mosaics like you see on the bottom of the stack, to carved, impressed, mokume gane, and seed bead wrapped. The beads here are all similar in width but she uses the same approach with skinnier varieties such as in the necklace that opens this post.

 

Tanya doesn’t have a tutorial posted for this, but I can help you with that:

  1. Pick a favorite surface treatment to create a sheet of clay with and then wrap the sheet around anything that can go in the oven. I keep a few pieces of aluminum and copper tubing for just such projects. Make sure the pieces are straight and have unobstructed lengths so beads can slide off after curing.
  2. Wrap the clay around the tube until the clay sheet overlaps then cut down through the length of the overlapping clay and then remove the excess clay.
  3. Carefully blend the seam where the ends meet.
  4. If the clay sheet has a smooth and even surface, you can lay it on the worksurface and, using a tissue blade, let it roll crosswise under the blade ‘s edge to cut each individual bead cut. Then just cure the stack as is.
  5. Alternately, you can cure just after you blend the seam then cut the beads off it with a craft knife or slide it off the rod and use a jeweler’s saw to cut your beads.
  6. You can string your tubes on multiple strands of stringing materials such as cording or leather thongs, a selection of various colored embroidery thread, colored Tigers tail, ribbon, etc.

Tanya has even more variations of this idea ready for your perusal on her Flickr photostream here. She also recently agreed to create a feature tutorial for Issue #3 of The Polymer Studio so be sure to subscribe or keep up your subscription to the magazine to get that beautiful project.

 

The beads below also require just a sheet of treated clay. These are similar to a popular paper bead technique you may have seen as well. They start with a sheet cut into narrow, long triangles that are then rolled up, starting with the wide end so that each overlap leaves part of the surface of the lower layer visible. It works with any sheet of polymer, treated or untreated, textured or not.

I love how Margit Bohmer keeps the triangles, created from a mokume gane sheet, really narrow so that the beads are nearly as big in diameter as they are wide. There is still plenty of surface showing but they blend into each other because the narrow bead doesn’t angle away as much at the point where they touch. As you likely already know, the longer the bead, the more space you’ll see between the bottom edges of the bead ends. These rolled up beads are also angled on their ends which can make them sit askew but the shallower the angle (like on these narrower beads) the more neatly they line up.

Margit has created the longer beads as well so you can compare them here or just look through her Flickr photostream to see what you like better. And if you want a full polymer tutorial on these types of beads, check out Emma Ralph’s classic tutorial here.

 

Another, maybe even easier, way to use sheeted clay for beads is to just roll up flat sections of clay without overlapping, in a loose, freeform way. This works really nicely with an organic treatment or texture. Just look at how lovely these wrapped textured beads are. They are simply flat sections of polymer impressed on a handmade texture plate and curled up on an angle.

These are created by Rebekah Payne who generously posted a tutorial here on how to make them.

 

A similar concept can be employed with snakes of clay. Just roll out or extrude lengths of solid, marbled, mica shift (see this post from earlier this month) or striped polymer and then wrap the strands up on a skewer, long thin knitting needle, or other thin rod and cure. You’ll end up with coiled beads like these created by Emma Todd, below..

 

You can also roll the beads, after wrapping them up, back and forth under an acrylic block or other small tile to level the strands, creating a smooth bead surface. Don’t use the rod to roll the bead as it will act like a rolling pin on the inside of it and widen the stringing hole. Unless you want that. You can also take them off the rod and gently press their length between thumb and forefinger to compress the coils a bit more and make flat ended cylindrical beads.

 

The interior of clay beads have a lot of hidden potential too, and they can so easily and quickly be revealed by just cutting them open. Here is my all-time favorite example of creating stunning beads by cutting the form. These fabulous beads are by Desiree McCrorey. Click the image to see her tutorial for this. Be sure to check out the beads she makes from the cut scraps at the end too!

Not only can you create simple yet complex looking beads by cutting stacks, you can use this technique with old canes as well. See Desiree’s tutorial for the same beads using canes here. And look around the site for other great tutorials. These are all older tutorials, but timeless techniques.

 

Beads Away!

The examples above are all easy to make, don’t take much time, and allow for your own take on composition, contrast, texturing, etc. So, I would like to suggest that you pick a couple you like and see if you can sneak in sometime today or this coming week to try them out to see which, if any, simple but expressive beads suit you.

There are also some publications you might want to check out if you are on a bead making bender or feel you will be after all this.

  • My favorite polymer bead book is Carol Blackburn’s Making Polymer Clay Beads. There are beads for all levels of clayers and lots of jumping off points for those who like to explore.
  • Although these get a bit more complex, the beads in Grant Diffendaffer’s book, Polymer Clay Beads are just stunning and there are so many tips in this book.
  • If you really just want to try some new surface treatments or get other ideas for changing up your own bead ideas, Marie Segal’s, The Polymer Clay Artist’s Guide, is such a thorough exploration of techniques. It’s my go to book for creative brainstorming on polymer treatments.
  • Of course, there are tons of ideas in The Polymer Studio and, especially for the more exploratory folks, in the back issues of The Polymer Arts. Grab a few of these in print or digital and let serendipity lead you into new creative territory. By the way, about 65% of The Polymer Arts issues are still available in print but quite a few are about to sell out completely so if you like your material in print, snatch them up while I still have them.
  • For further inspiration in the form of eye-candy, pick up your copy of Polymer Journeys 2016 and/or 2019. Both are just brimming with ideas of all kinds. If you need a copy, get them on the website here.

 

Holes

Our foreman, standing guard at the pit to our main drain line in our front yard … there’s another guy down there!

For those of you mildly entertained by the situation here at Tenth Muse central, all I have to report is, well, holes. I counted 8 points of egress big enough for the entry of adventurous birds or, in 2 cases, an adventurous racoon, thanks to the workers punching through our walls for new plumbing and a new electrical panel. Its kind of unnerving to stand in the middle of one’s house and see so many wide-open entries into the space.

There are also some deep holes! The nearly 3 foot deep hole in the master bath is big enough for a couple suitcases of cash (like I have enough cash even in single dollar bills to fill a couple suitcases, not after all this work!) but the 7 foot deep one in the front yard is ready for hiding bodies. Or maybe just my entire stash of failed art projects. That craziness has us now investigating xeriscaping and ground cover plants because between the trench and the well at the end of it (and all the dug up soil covering the area around it), that grass ain’t coming back. It didn’t grow well there anyways. So now we are plant shopping. I never much liked shopping before (unless if was for art materials!) but, man, am I getting burned out on that particular activity. The shopping part, not the plants. I’ve been enjoying my plants, with all the spring flowers in bloom. The garden has been my escape from all the chaos and noise!

However, in all this, I have managed to clear up the studio table and started working on new stuff! It’s amazing what can happen when you don’t have distracting chores like housecleaning (although I miss having a house to clean!) Keep an eye on my personal Instagram page for new pieces and, hopefully, new poetry to accompany it. Find me @thesagearts

 

Now off to enjoy a rare cool and rainy Sunday. I hope you have a beautiful Sunday to relax in and a great week ahead!

Read More

Tile Talk

May 12, 2019
Posted in

Do you ever stop to ask yourself if what you create makes you happy? It seems like a silly question since creating is usually passion driven so being able to feed that passion should make you happy, right? But have you ever found yourself creating something because you believe it is the kind of thing other people would like but later realize that you don’t enjoying making it?

I found that happened a lot when I was a selling artist. You get wrapped up in what you think the market would want, what you think will sell best at the next show, and you’d be just making things for the money and not because it’s what you want to make. Other times we think that in a particular material, like polymer clay, it is best used for certain forms such as jewelry and home decor. But as we all know, polymer can do almost anything and yet 85% of it being created and shared online is jewelry. Jewelry is pretty fun stuff to make, sure, but if you enjoy polymer, just keep in mind you don’t have to make jewelry.

I myself have been moving away from jewelry. A pendant or pair of earrings are oftentimes still the best items to create to show off a polymer technique for a magazine article or tutorial but more and more, I create objects without an end goal in mind and am really enjoying just making little objects and samples of techniques. Last year, I started to see patterns and connections between them and eventually started putting them in shadow boxes. You can see an example of one of my “specimen” boxes in the latest Polymer Journeys book, if you’re curious. I’m also trying to devise a class for doing it. It’s so much fun!

But when I have to create jewelry because I am vetting an article for the magazine or want to make a gift, I have lately found that I don’t look forward to the engineering of it – figuring out how it is going to hang, what stringing material will work best, what findings I need, as well as worrying about comfort and durability. I find I don’t want to think about those things when I create and it’s not out of some kind of laziness, it’s just not what I want to spend my mental and creative energy on, and I’m good with that. I just really want to follow creative paths that make me happy right now.

To that end (and because I’ve spent so much time in tile stores lately), I’ve decided I might just focus on tiles for a while. They are a very freeing form. A tile is just a canvas for 3D materials. You can do whatever you want on them. You can make them any size, any shape, and can attach whatever you want or attack it however you want. I think we really should all give ourselves the freedom to play with this form, to let ourselves be free to create from the heart with a material we love. At the end of a session of tile making, you may find you are really looking forward to creating necklaces or making beads or covering vases. But I am going to suggest you give a tile a try here and there to just let yourself create freely. Doing this can help with your designs in other forms.

To that end, of course, I’m going to share some tiles this weekend. I am going to share a lot of non-polymer ones because I think, if you’ve spent any time online, you’ve probably seen your share of polymer tiles these last few years, especially with the Fimo 50 year challenge a couple of years back and with the common inches exchanges (inches are just tiny tiles). So, I’ve got a quite a mix for you but it is all art that can translate to polymer even if it is in another material.

 

Laying it All Out

The opening image of this post is a photo from a class conducted by Laurie Mika. She is well-known for her colorful and intricate collage/mosaic pieces which, by the way, she teaches at various events. This collection of student work was from a polymer clay tapestry class she taught at the SAMA (Society of American Mosaic Artists) conference in Nashville just a few of weeks ago. They are all just lovely. There is no high-end technical skill needed to put these types of things together which makes them ideal for exploring color and texture and just letting yourself go. (You can check Laurie’s workshop schedule on her website.)

Jael Thorp caught my eye some years back with her “clay doodles”, including the one below. I thought they looked like zentangles for clayers. Can you imagine the flow state she must’ve been in to create this? You can just get so completely lost in this kind of work and that is a big part of why people find tiles such a wonderful creative outlet.

Check out this post with her various doodles from some years back. She went on to refine her technique, making beautiful beads and home decor with the same type of application. You can find them on her Flickr photostream.

 

Let’s move from polymer to ceramics now. It is a rare thing in ceramics that can’t be replicated in some fashion in polymer so I find ceramic art quite inspiring. Here is one of my favorite tile makers in ceramics, Chris Gryder, who has gone a bit more three-dimensional of late but his tile compositions are timeless.

In this composition, each tile is its own separate piece but he’s connected them all with these lines that he creates through the grid of tiles. So, really, you can make a whole bunch of tiles without worrying about what they’re going to end up as, and then, if you want to put them together as a composition because they have a similar or complementary set of color palettes, textures, or motifs, you can use lines that flow throughout to visually connect them for a larger composite composition. This approach would allow you to just make tiles as the muse directs and then you can later make them into a larger wall piece.

If you like this piece, go browse through his website or his Instagram page for more fantastic inspiring wall compositions in tile.

 

Keep in mind, just because tiles start out flat, they are not two-dimensional and you can create extremely three-dimensional pieces on them. Here’s one example with some very organic forms and textures created by Lauren Blakey, another ceramic artist.

 

And here’s another three-dimensional example in glass by Shayna Leib.

As you can see, tile work is open to all types of materials so keep that in mind as you sit down to tile. Mix in anything that your heart and muse desires. Mix and match mediums, embed oddball trinkets you’ve kept for, as yet, unknown reasons, and just keep an open mind.

After pulling these examples for you, I realized that all the examples are squares here. You don’t have to create square tiles to play with but that is the more common form. However, if you’re not feeling square, try a free form shape or an oblong one or maybe, because today is Mother’s Day, create a big heart for all the mothers out there. Happy Mother’s Day to all you amazing women!

Here’s a heart from Tina Ruppert of Wisecrackin’ Mosaics on Etsy. Pick a favorite shape and a bunch of canes or other scraps of clay and you can do something along these lines as well.

 

Getting Squared Away

I’m going to leave you with these thoughts and hopefully some curiosity about playing around with a tile or two, in whatever form and techniques interest you. If you need some jumpstart tutorials, here are a few places you can go:

Sara Evans has a video about her tile making process here – https://www.youtube.com/watch?v=9FAxYwgJfLo

If you want to do something tile like but still want it to be something functional when done, maybe you would like this polymer clay tile box tutorial –

https://mermaidsden.com/blog/2015/02/12/polymer-clay-tile-box

Or have fun with one of our true masters of polymer clay tiles, Chris Kapono, with her very detailed and yet tremendously fun tile project in the Polymer Arts Projects book which you can purchase and download digitally if you need it immediately or order the print edition from our website.

I opened with a discussion about doing what makes you happy and hope it gives you some food for thought. If you want to hear a couple of transformative stories in that vein, please be sure to get your copy of The Polymer Studio Issue #2, recently released, which starts and ends with stories about finding one’s happy place with one about Christine Dumont’s studio complete with a visual tour, and the other about Donna Greenberg’s focus moving from jewelry to large wall art. Check out the Issue #2 Sampler if you haven’t seen the new issues yet.

 

We’re daily trying to find are happy place over here as our house has continued to be demolished more and more, beyond what we (or our contractor) expected even. Old plumbing can be a tricky thing! If it would just warm up here, it wouldn’t be so bad. A cold Southern California in May is just weird.

I’d share progress shots of the house but it’s pretty much just down to studs and busted up concrete floors. Oh… And a large trench across the whole of the front yard for a new drain line. I’m thinking about making it into a moat. Like a habitrail (if you remember those hamster houses) for our pond fish. They could just swim circles around the house! Okay, probably not but gotta have fun with all this bedlam, even if it’s just dreaming up nonsense like that!

I hope you all have a wonderful Sunday and Mother’s Day! I’m off to have mimosas with the family’s fabulous females myself! Enjoy the day and your coming week!

Read More

Splitting the Difference

April 21, 2019
Posted in

Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night  … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)

So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.

I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!

So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?

 

Splitting the Canvas

Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.

For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.

 

Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)

Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.

This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.

 

And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.

 

Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.

 

You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.

 

 

Splitting up is Not Hard to Do

If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!

Here is a simple series of steps you can try right now … A Cane Split Canvas:

  1. Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
  2. Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
  3. Burnish the canes into the clay sheet so the surface is smooth.
  4. Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
  5. Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
  6. Once you find the section you like, cover it with plastic wrap and cut with your cutter.
  7. Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.

Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.

You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.

Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!

 

Now for the Great Tile Adventure

Story time! For those entertained by the little dramas of my little life.

So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!

Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.

So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!

Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!

I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!

So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.

Read More

All It’s Cracked Up To Be

March 17, 2019
Posted in

What is it about weathered and worn surfaces that so many people find attractive these days? Mind you, I am very much one of them. I have a whole line of work called “Beautiful Decay” that explores the beauty I find in the deterioration of durable materials. But the one related effect that seems to be everywhere these days is crackling. Who doesn’t love a good crackle! From shabby chic furniture to crazed ceramics to crackle glass decor, the look of a deteriorating surface seems to have wide-ranging appeal.

Knowing that, it’s not really a surprise that crackle is so popular as a polymer technique. A great many of us are already texture fiends and, if you love texture then you are going to try crackle- so there’s one of the reasons for its popularity in polymer. But we also know that there is a market for work with crackled surfaces since it pops up in so many areas related to decoration and adornment, making it a safe bet if you sell your work.

There is no one right or best way to create a crackled surface in polymer. You may not have realized it, but there are literally dozens of ways to create crackle. It can be created with a crackle paint medium, partially cured layers of polymer (like I show you in my Controlled Crackle technique which you can find in your Fall 2011 edition of The Polymer Arts), dried paint (or glaze or gilders’ paste or floor wax) on raw clay, metal leaf on raw clay, leaching, alcohol treatments, or by creating a faux texture with impressed materials. And I know I am still missing a few in that list!

So, let’s enjoy some crackle work today and wrap up with a few tutorials on different crackle techniques that you can try out.

 

Let’s Get Cracking

One of my personal favorite “cracklers” is Staci Louise Smith. She uses a number of different techniques to achieve a wide range of cracked texture. In the necklace below, her crackle is not subtle. It is not evenly spread across her beads either but rather, it is rough and tumble and scattered in energetic horizontal lines. Her soft coloring calms the chaos of the crackle which is also balanced out by the many other purposeful accents and lines from the wire.

Staci can also do subtle as evidenced by the opening piece, a Balance Bowl from her tutorial in the Polymer Art Projects – Organic book. (You can get the book on our website if you want to make one of these stunning bowls.)

Check out this blog post where she shares how she makes the necklace here along with sketches and her thoughts on the process.

 

A subtle crackle can often take a bit more patience but what a lovely effect it can have. It may not even be obvious at first that the beads on this necklace below by Ursa Polak have a crackle surface, but the weathered feel comes across immediately. Take a close look to see all the fine-lined cracks that add to the depth and variation of the surface.

 

Kroma Crackle is a lovely gel medium that itself dries and cracks without having to stretch the clay and yet remains flexible so that you can manipulate the clay without the cracked material popping off. Once you worked with it for a bit you can control the size of the crackle pretty well. You can add small amounts of acrylic paint or mica powders to give yourself a wide variety of color options. You can also apply paints, inks, dyes and other colorants on it after its dry.

These earrings are by Els van Haasen uses Kroma Crackle on polymer. You can see how regular a crackle you can get with this medium. But it can definitely be quite varied once you come to understand how to use it.

 

You almost forget that the technique that was most commonly used by the highly esteemed Elise Winters, who we lost just this year, was also a crackle technique. Her work was very controlled, as was crackle but that was probably the most recognizable part about her signature style. I can only imagine the work she put into gaining such control over her crackle, but it just shows what can be done when we invest a bit of patience into our work. (I erroneously put in that this was metal leaf when I first posted but, no, it’s paint, which also takes such skilled control, having to ensure that the paint is evenly applied to get such fine crackle.)

 

This is actually a piece of mine from some years back. It includes alcohol treated raw clay, controlled cracking of partially cured clay, and metal leaf colored with alcohol ink. The alcohol treatment is a way of drying out the surface of raw clay to get a very fine crazing. It’s a bit of a tricky technique but it sure worked here. That helped create the uneven surface of the partially cured polymer under the metal leaf, giving it a burning ember look.

 

Let’s Crack You Up

Ready to try some various cracking techniques? Here are a few freebies to get you going:

If you want to try the straightforward Paint Crackle Techniques:

  • Grab a craft acrylic (the cheap acrylics work better than artist tube acrylics which tend to stretch rather than crack) or tempera paint and a well-conditioned sheet of polymer rolled on the thickest setting of your pasta machine.
  • Brush a moderate (not heavy) layer of the paint onto the polymer. Wait for it to completely dry.
  • Then roll it through the pasta machine set at two settings down from the thickness you created the sheet on. You can stop here or, for wider, more varied crackle, turn the sheet 90°, adjust the pasta machine down another one or two settings and run it through again.
  • You should have a nice crackle now but if your paint is stretching rather than cracking, rolling another sheet of polymer and lay the crackle sheet on top and then start rolling it through the pasta machine again. Eventually, the paint will crack but sometimes you need a really thick layer of polymer to start in order to stretch it far enough. Tempera paint won’t stretch and cracks very nicely if you have that on hand or fancy a run to your local craft store. You could also get some crackle medium while you’re out and follow the instructions to crackle paint directly on your raw polymer clay.

You can find some examples of the use of different paints on this post by Jan Geisen.

For more tutorials online:

  • One of the things I didn’t show you in the samples above was how to use impression material to create a faux crackle effect. I use crumpled aluminum foil for this and then use the antiquing approach of rubbing acrylic paint into the cracks after its cured and wiping it off. But Katie Oskin has an interesting material to share in this online tutorial, as well as showing the effect of painting it before she impresses it.
  • In this video tutorial, Sandy Huntress shows you how to crackle very thin sheets of partially cured polymer clay.
  • Crackling can be done on round surfaces too! Here’s an online tutorial using metal leaf on bicone beads to create crackle. Keep in mind you could do the same thing by painting the beads and then rolling them around to get it crack.

Do you know of other great crackle tutorials or want to point out another crackling technique I didn’t mention? Drop a comment below (if you’re on this post’s page online) or click on the title of this post to go to the post’s page and share the info with us all. It would be much appreciated!

 

Bits of News

 

Okay… Off with me. Working on the next issue of The Polymer Studio. Get your subscription or catch up if you didn’t get the first issue by just jumping over to the website now.

Know that your purchases and subscriptions help me pay the bills so I can justify the time I put into sharing all the good stuff on this blog. Help me help you as we collectively feed our addiction to polymer!

Have a wonderful and creative week! –Sage

 

Read More

Hole-y Design

March 10, 2019
Posted in , ,

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Read More
If you love these posts ...

Click a tag …

art blog artist artistic influence artistic inspiration artist inspiration art magazine beads bracelet caning clay clay blog clay magazine color composition craft blog craft magazine creativity design earrings inspiration inspirational challenge of the day jewelry mixed media movement natural nature necklace organic pendant polymer polymer art polymer arts polymer blog polymer clay polymer jewelry polymer magazine sculpture technique texture The Daily Polymer Arts Blog the polymer arts The Polymer Arts blog The Polymer Arts magazine tutorial tutorials

Archives