Radiating Variety

August 11, 2019

Would you say you creatively lean toward symmetry or asymmetry? Although humans are innately attracted to symmetry, we all lean towards one or the other when it comes to our aesthetic preferences. However, symmetry, which represents order, is generally found to be more pleasing to the brain than asymmetry but, interestingly enough, symmetry alone cannot make something beautiful. That’s because that orderliness can get rather boring.

This is not to say that symmetry is automatically boring, because it certainly is not. It’s all a matter of how much energy the other characteristics of that symmetrical design add to it. However, there is a kind of artistic prejudice against symmetry out there sometimes. It’s this kind of default line of thought that symmetry is not only boring but a kind of cop-out in design, that it is something primarily employed by the inexperienced and unskilled aspiring artist. That always struck me as really ridiculous. Did they think that Mother Nature should rearrange the flowers, the growth of crystals, and the patterns of butterfly wings? Because they are all symmetrical and yet, these are some of the most beautiful natural things in our world.

So, make note that it’s not symmetry that makes a design boring, it’s a lack of energy in the design. Making exciting, energized, and intriguing symmetrical work can actually be challenging so when someone does it well, it can be quite impressive. Asymmetry has an innate sense of energy simply because it is off-balance and our brain, the way it is, always thinks things are moving towards balance and thus sees asymmetrical design as something in flux. So really, asymmetry might be considered a kind of a shortcut to an energized design although, in truth, both symmetry and asymmetry have plenty of challenges to contend with when designing.

There is one type of symmetrical design, however, that does have both balance and energy almost automatically included. This is the beautiful radial symmetry seen in nature in everything from starfish to flowers to snowflakes. Its energy comes from lines or a progression of shapes moving out from a central axis. The movement in this kind of symmetry is strong and directional but it can still verge on the boring if the radiating lines do not have variation.

Let’s look at some examples of beautifully done radial symmetry.

 

Going Around the Axis

We see radial symmetry in polymer all the time, particularly in kaleidoscope canes. The process of slicing and reassembling the canes with the same point in the pattern arranged at the center creates radial symmetry. There aren’t necessarily radiating lines in these canes, but the mirrored shapes tend to create points or a kind of visual growth outward.

Here’s a beautiful five-sided kaleidoscope cane – yes, symmetry can have an and odd number of sides because the design is still consistent around a central axis – whose parts have a sense of growth moving outward. This is by the very adept cane artist Lana Fominicheva of LaFom on Etsy.

 

A more direct production of radial symmetry can be created by building with a collection of elements such as in this quilled cane design by Meg Newberg of Polymer Clay Workshop.

Cool canes, right? You can get Meg’s Quilled Cane Tutorial in her Esty shop and get to making your own as soon as you download it!

 

Radial symmetry that is neither straight nor separate lines or progressive shapes can still create energy and interest while still staying symmetrical and beautifully balanced as seen here in this locket by Ola of PinkLaLou on Etsy. The crossing over of the lines in the central image are highly energetic and flow out more than burst out from the central axis but flowing lines are still energized only in a calmer, perhaps more elegant, way.

This is a locket created with filigree and cold enamel, not polymer. At first, I thought maybe the design in the middle was cold enamel, but I think it may be an image under resin. Cold enamel is a pigmented semi-translucent resin created to look like traditional glass enamel. If you love the look of enamel but have neither the equipment nor the patience to learn that amazing craft, cold enamel might fill the bill for you. But in the meantime, you could start a radial symmetry design with the right graphic using a liquid polymer image transfer.

 

Okay, so now that you’ve seen a few examples, would you say this next piece below is radial symmetry? Scroll down before reading on and just take a quick peek. Its looks like it is, right?

Well, technically no, it isn’t, but it has all the initial markers with a central axis from which elements radiate outward in a similar pattern. However, nothing is actually symmetrical from one side to the other. Our brain perceives balance because the progression from the center feels consistent, going from radiating lines of inlaid polymer to an even boundary of solid silver to a filigree of swirls and set gems that fill the outside perimeter. But all the elements have an irregular placement, especially in the stones and swirls outside of the focal center but also in the thickness, pattern, and coloring of the inlaid polymer. So, this pendant echoes radial symmetry without being symmetrical thus giving it a tremendous amount of energy without feeling chaotic. Pretty cool!

This necklace, of course, is a Liz Hall creation. Liz has been one of my polymer heroes since nearly the beginning of my exploration into the material. She combines precious metal clay with polymer inlays, adding in stones, glass, and other shiny bits here and there as well. Her openness to other materials allows for this broad range of exploration in design and yet she has a very distinctive style. If you look closely at her work, you’ll see every regular pattern and design is just a touch off, including the pendant that opens this blog post. That’s part of her signature style. Simple but effective.

 

Of course, the most quintessential of radial symmetry design is the mandala. Much of the radial symmetry we see could be considered mandalas of sorts, if we are just speaking of the geometry of it. Mandalas are, however, traditionally a reference to a kind of spiritual map, one that was originally meant to be a model for the organizational structure of life, in both the physical and metaphysical sense, and consisted of a square with a circle and four T-shaped gates, one facing each side of the square. But, as you might have noticed, that definition and the base design has been broadly extended. As long as the design has a regular structure organized around a unifying center, it seems to be generally accepted that it can be called a mandala.

We see these mandala structures in polymer pieces created with cane slices a lot but it is also readily achieved with layered polymer elements like these layered ornaments Kay Miller used to make. She’s off focused on dimensional greeting cards now but we can still enjoy the images of her perfectly designed and finished ornaments.

 

Mandalas are certainly not relegated to polymer when it comes to artwork. And it’s not just about those dot painted rocks that are all the rage now either. Take a gander at this gorgeous mandala brooch created by Jima and Carlie Abbott of Mixed Metal Jewels.

So… do you use radial symmetry in your work? If you don’t or haven’t done much of it or simply haven’t thought much about it, maybe it’s time to try it out. It can be very meditative. See for yourself!

 

Best Laid Plans

Well, this week I was going to start casually working on plans for future publications and new projects between physical therapy and catching up on sleep, but chaos reigned here at the house. Again. There was light at the end of the tunnel when we suddenly went from being a couple of days from finishing the house renovations to a couple of weeks.

The appliances were in and the final painting had commenced but then we discovered that the floor had a problem along with more damage than was anticipated so instead of simply repairing our flooring around the construction areas, we had to tear out nearly half the flooring in our house! Talk about frustrating! And depressing. And nerve-racking. Blah.

But, long story short, we worked it and persisted until we found something we could afford and miraculously ended up with this gorgeous acacia wood flooring and a crew that rushed in and got it all taken care of pretty much in one day! It was nuts. There were so many guys here, it was like ants in the house. But it was by far the best work done on this whole project. Here is my husband Brett, just super excited about his new floors, in our nearly done kitchen.

 

I’m pretty sure his expression will change when we sit down to pay the bill though. But at least we can drown our sorrows over a glass of wine in a gorgeous new kitchen.

Or a glass of seltzer in my case. My metabolic issues are dampening my potential to celebrate or drown my sorrows in my family’s traditional Irish way. No sugars including alcohol for me for a while, not until my metabolic issues are under control and it’ll be minimal even then. It’s sad but it’s really nothing compared to what some of my other friends are going through right now. All you wonderful people … take good care of yourselves! I don’t want any more troubling health news. Ok?

On the positive side, my arm is much better even after this one week with minimal computer time. It is starting to hurt now though, but only because I keep forgetting to not type! Three decades of writing for a living and it’s hard not to use the keyboard when pain is not there to readily remind me not to. I’ll learn!

So, the word now is that we should have our house back in a week. Then I can start cooking properly and really button-down on the new diet regimen I have. So, keep your fingers and toes crossed for us as I will keep good, positive energy and prayers flowing out to all of you with challenges going on right now.

Have a beautiful, creative, and inspiring week!

Crosswise Crafts

Heather Campbell – “Keep Circling”

If you read this blog because polymer is your primary art material, do you consider yourself a polymer artist or a mixed-media artist? This question has arisen in a few conversations recently – how to identify oneself as an artist – and also in regard to the content of these blogs posts because a lot of people that are writing me of late have turned out not to be primarily polymer artists, or at least identify themselves as mixed-media rather than polymer artists. I think that’s really cool and I don’t find it terribly surprising that people who work in other art materials are interested in polymer because polymer has so much crossover and such a wide range of possible applications.

I mean, is polymer clay the only material in your art studio? Aside from maybe dedicated caners, I think the majority of us who identify as polymer artists also have drawers and bins and boxes of other things like beads, fabric, paints, paper, resin, and so much more. So, is your polymer art really a type of mixed-media art? And what is mixed-media art really anyways?

And most of all… do the labels really matter?

Labels are important for the purpose of organizing all the information we are inundated with daily, but unfortunately, it also puts people and concepts in restrictive boxes and that can become problematic. When someone is labeled (or calls themselves) a polymer artist, it doesn’t mean that they work only with polymer or even primarily with polymer. They may simply have an affinity for the material more than any other single material.

Not only do we use a lot of other materials in polymer work, but we can also so readily draw inspiration from looking at artwork in materials. I, myself, find fiber art to be an immense resource for ideas in my polymer work, especially modern quilting, so I thought I’d bring you along to explore some of the ways today’s quilt art and polymer creatively crossover.

Crosswise Crafts

Quilt art is a form of fiber art which pushes beyond functional bedcovers and quilted clothing of the past. Fiber Art itself is a relatively recent term, first used shortly after World War II to categorize fine art using natural or synthetic fiber as the material. This speaks to how relatively new the focus has been on fiber as an art form. Luckily, the term quickly worked its way out of the relatively elite world of curators and art historians into a more generalized use encompassing all fiber-based artistic applications, from weaving and quilting to intensely detailed embroidery and monumental outdoor installations.

There has been a tremendous amount of experimentation going on in fiber arts since the latter decades of the twentieth century, something as polymer artists we understand and applaud but, unlike polymer the many forms of fiber art draw from some of mankind’s oldest crafts so experimentation tends to rally not around techniques but around form, nontraditional materials, unusual use and placement of materials, and conceptual approaches, especially those involving cultural issues and activism. This makes it a rich source of inspiration that can really light the way for new possibilities in polymer.

As I’m sure you know, not only do we emulate fiber in polymer, we also have methods of construction and layout with veneers and inlays which use basically the same approach as quilting, less the sewing. Both art forms also technically work in three-dimensions but are commonly composed in two-dimensions which is why I think it’s such a great arena to look to for a creative shot in the arm.

Here is a very direct example of the crossover between quilting and polymer. Lindly Haunani draws the patterns for her polymer quilts directly from classic quilt patterns, like this one based on a half square quilt design.

She uses these wall pieces to examine and teach color. She also applies the concepts to brooches like these lovely pieces.

By the way, Lindly has a series of workshops teaching color through the creation of veneers and polymer quilts coming up in late August/early September at Creative Journey Studios. You can check those out here.

 

Although classic quilt patterns pop up in polymer quite often, contemporary quilts are nothing like these. Here is an example of traditional quilting techniques but without the traditional patterns by Lisa Jenni. Do the colors or composition poke at your creative brain but with polymer on the mind? It could be an arrangement with alcohol ink dyed polymer, striped canes, and stamped clay medallions, right?

 

That quilt reminds me a little bit of Gera Scott Chandler’s work. The colors and the emphasis on oblong circles are probably the connections but you see how one could possibly inspire the other, yes?

 

And how have we not seen something like this piece below done in polymer? This is embroidered quilting by Susan Lenz It’s less than 3’ x 2’ so such a piece in polymer would not be a monumental task. This has given me an idea … I think I know what I’m going to do with all the inchies collected over the years. Let’s all make wall pieces from our collections!

Be sure to look at Susan’s Lancet window series too. They have a similarly open layout but in kind of stained-glass patterns.

 

Contemporary quilts, like polymer, are not restricted to a two-dimensional canvas or flat layers. There are a lot of things being added into and onto quilts today. Just look at this riot of wonder by Molly Jean Hobbit.

Does this piece bring to mind any polymer artists who also use lots of pieces and materials in their work? Maybe Laurie Mika, Heather Campbell (as seen in the opening image), or even Christi Friesen with her mixed-media mosaics? If you have always liked what these ladies are doing, just imagine the fresh batch of ideas you could get from contemporary quilts.

Want to really delve into the quilt world now? You go down a rabbit hole by simply putting “quilt art” into Pinterest, or you could start on the Contemporary Quilt Art associations gallery pages. Click on each image to get a whole slew of additional quilts by various artists. It’s quite the fabulous (and possibly time gobbling) rabbit hole to go down.

Want to do a little polymer quilting of your own today? Well, you could sit down to this video by Jan Montarsi, demonstrating how to make striped polymer quilt squares. Mind you, he uses his new Create Template, but you could do it without the template if you want to get right to it. If you have the latest edition of The Polymer Studio, Issue #3, go to Jan’s article on multicolor blends first to make some really bright and saturated blended sheets to work with. If you didn’t subscribe or purchase your copy yet, you can get an immediate digital download or order a print edition on the website here. And you can get Jan’s templates here.

 

Where Two Crafts Collide – working with the Craft Industry Alliance

So, my curiosity about this mixed media labeling question pushed me to do some research early last month and, in the process, I found the Craft Industry Alliance. This is a fairly new organization – it was created in 2015 – but it is growing quite quickly as an information and supportive advocacy trade association for all working craft artists – this includes you!

I really liked that this organization recognizes craft art as a broader community that is not segregated by material or form. Since the founders are primarily fiber artist, however, it started out heavy in that arena, but they are actively growing into other communities. I know this because the president of CIA (gosh, their acronym sounds so covert!) contacted me after I joined their organization online with an earnest request to get to know the polymer community better. After a lovely chat and a few emails, we are now working on polymer based content for the Alliance. How cool is that?

So, what is this organization and what might it do for you? Well, here is the skinny, straight from President, Abby Glassenberg:

Craft Industry Alliance is a community of craft professionals. Strengthen your creative business, stay up to date on industry news, and build connections within a supportive trade association. Artists who are interested in becoming teachers of their craft, writing books, and showing their work in galleries need to think about setting up a solid business foundation from which to grow. Marketing and branding, legal, accounting and tax issues, social media and blogging … these are all issues creative business owners need to think through. Don’t do it alone! Come together with 1,300+ fellow members in a supportive community where you can find solid answers to your questions, make connections with the right people, and find the resources you need. Check it out at https://www.craftindustryalliance.org  

As you can see, the organization is focused on active artists who show and sell their work or promote themselves as teachers or writers. It doesn’t really matter how small or how big your creative operation is, you’ll always benefit from a little help and I think it’s a fantastic idea to have a community of people from all areas of craft supporting each other. I’ve always been a little worried that the polymer community has remained a bit insular since we have issues that few other material arenas have, being such a very young material, working with a plastic in an environmentally sensitive world, and battling the “kids art material” image. But growth in this community will come from the outside, not from within so the more we reach out and network with other craft artists and the larger craft community, the more energized and innovative we will be as a whole and that will keep the community growing and vital.

The Sage Sabbatical

So, as most of you probably know by now, August starts my little sabbatical from production work on print publications so I can attend to some health issues. I have to admit, it’s made me a little depressed. It’s just rather sudden and I’m such a workaholic and so used to having a deadline hanging over me all the time so it’s a little unnerving. Luckily, it actually started out busy since we wrapped up the release of The Polymer Studio Issue #3. It turned out just beautiful and we’ve already received so many great comments on it with particular excitement around articles like the fascinating story of Brazil’s polymer master, Beatriz Cominatto, Debbie Crothers’ acrylic and polymer exploration, and Jan’s multi-color skinner blend techniques.

If you’re waiting on your copy, the digital edition went out on the 31st – check spam/junk mail folders if you’re due one and didn’t see it in your inbox. Print editions went to the post office this past Wednesday, so they are on the way too. I have my batch of stock here if you need to order it. Just go to the website.

We also added a Special 3 issue Package of all three of The Polymer Studio issues if you need to do some catching up.

If you’re unfamiliar with my silly little situation that forced me into taking time off, you can find the more-or-less full story in our most recent newsletter here.

If you don’t get our twice a month newsletter, signing up for the newsletter is one of the best ways to stay informed on our publications and new projects, of which there will be something before the year ends even if I can’t do print! But yes, I promise I will not overextend myself and do with the doctor orders!

Speaking of which … I should go now. I hope you are excited by the peek at quilts and the connection to polymer. Have a wonderful rest of your weekend and an inspired week!

Rousing Repetition

Neon Paper beads necklace by Devi Chand.

First of all, thank you to all you amazing, wonderful, caring folks who sent me notes and words of encouragement and offers of help and even a book in one case, all due to my little tendinitis issue. You are the most amazing people. What a fantastic community we have! I expect most of you are dealing with something frustratingly disruptive in your life and things a lot worse than my little annoyance in many cases so know that my heart goes out to you too. Life is challenging. So, let’s go out and wrestle it and show the universe what we’re made of!

I do have more news but I’m going to save the update on my situation until the end so you can enjoy some artwork first.

Okay, on to the contemplation of art!

Rousing Repetition

This week I want to talk about repetition. Do you like heavy repetition in artwork, where a single form, mark, or motif is repeated over and over? Saying it like that makes it sound boring and unimaginative. But I think repetition has gotten a bad rap. I mean, sure, in some circumstances, like when someone says the same thing over and over again in a conversation, it is going to get on your nerves. But when it comes to design, repetition can be mesmerizing, energetic, and downright stunning. The trick is to put some rhythm and variation into that repetition. Or at least, if it’s very static, it’s best if it is obvious that a lack of variation is intentional to convey stillness, poise, or something of that sort.

I thought we’d pull up some really beautiful examples of repetition to prove the point. You’ll note in all these pieces that although form, shape, motif, or other characteristics are repeated, variation in other aspects of the design choices brings in the energy and rhythm that draws us in. The repeating element also serves to create cohesiveness and unity amongst all the other elements

So, as we go through these this week, identify the repeating design elements in each piece and then the variation that makes the repetition so interesting for you. I’ll show the piece first before I talk about it so you have a chance to consider and see what you come up with. Mind you, you will often come up with things that I won’t and that doesn’t mean that I’m right and you’re not. When art is viewed, it has to be fundamentally about personal interpretation so there is a ton of room for your unique point of view. Asking yourself these questions that I periodically challenge you with just gets you to actively think about the work, homes your eye, and, hopefully, gives you the understanding to verbalize those things so you can translate them into aspects of your own work.

So, let’s get to it!

 

Music in the Monotony

I am going heavy this week on non-polymer artists and I may do a bit more of this going forward too. There is just so much great design amongst craftspeople of other mediums that we could really learn from. I find it refreshing and immensely inspiring to consider how to get the aspects that I enjoy in the artwork of other mediums into my polymer designs. I hope you agree and will stick this out with me! But we’ll start with polymer work.

Here we have some really obvious repetition with a couple of bracelets from Maria Belkomor. A lot of things are being repeated here. How many do you count?

Depending on how you count, there are either two repeated elements– the black carved beads and the disk elements – or maybe four if you count the stacks of beads and the colors. Or maybe you counted more. Everything in these are repeated except for the clasps so pretty much every element can be counted as a repeating one. Variation and, especially, the contrast in the colors and the contrast in the shape between the round beads and the flat disks is what keeps the repetition from being boring. It’s very regular but the bracelets are still fun and visually engaging pieces.

 

Keep in mind, repetition doesn’t mean it needs to all be lined up to engage repetition. Take a look at the pieces below. Parallel lines are used over and over again but aren’t always the same types of parallel lines nor are they seated in the same orientation.

Anna Nel has a lot of fun with her bouncy graphic look by repeating parallel lines over and over but varying them from solid line sets to lines of blended clay, adding pops of color and focal points with the irregularly placed round cane slices. Her variation in color, going from black-and-white to very saturated hues doesn’t hurt the impact of these pieces either.

 

Looking outside of polymer, it is not hard to find gorgeous examples of repetition in construction jewelry like beadwork.

Obviously, the repetition here is primarily in the square beads, all lined up with the same orientation, as well as the repeated dangles. The designer, Beth Graham of Semper Fi designs on Etsy, switches up the color in the squares and the length of the dangles for a simple but very effective variation within the design. There are much more intricate bead designs out there, but I like this example because it highlights the concept in an easy to identify way and works to great effect.

 

I wonder if, in polymer, we might use repetition more often if it was not so easy for us to vary up our elements. I do think there is such a discipline in trying to create dynamic and intriguing pieces without using a wide range of variety to carry it. Just look at this necklace below. It could be polymer but is gorgeously carved, colored, and polished wood.

Liv Blavap’s works are amazing. She works with repetition in a way that it somehow becomes the focal point of her pieces. I think it’s because there’s an almost seamless transition in the variation between one element and the next, making a smooth undulation in the form and, collectively, feeling like one continuous piece even though it is dozens, maybe a couple hundred, individual elements. This approach and her workmanship make you hyper-aware that basic forms are being repeated, if changing along the way.  If you’re unfamiliar with Liv’s work, jump over to this site for a quick peek at more of these stunning necklaces of hers.

 

Okay, one more piece that is not polymer but so readily could be and I think will be quite inspiring for those of you who like to work with sheets of thin polymer or, looking at the pattern only, cool geometric cane work. Paper does really lend itself to repetition as seen by this and the paper necklace of the opening image.

This is paper jewelry by Dutch artists Nel Linssen. Paper quite readily, and beautifully, lends itself to dynamic repetition. The energy here comes with the variation within each element that has been repeated. It doesn’t hurt that they’re basically arrow shapes all pointing inwards making it feel like all the movement is strongly and persistently moving towards the center. Yes, there is strength in repetition as well!

 

Meanwhile, back at the ranch (as they used to say) …

Okay, so, a little bit of an update on the situation over here at Tenth Muse Arts headquarters:

The not so great news is that the conclusion about my tendinitis progressed into something called tendinosis which takes a lot longer to heal and is why I am still dealing with it. On top of that, I have some possible physiological issues which may be the cause of my slow healing (on top of working too much, of course!) The good news is it is all fixable. However, I am going to have to disrupt my usual schedule to deal with this and, with the tendinosis, I am being told that I should stay off my keyboard as much as possible for the next 3-6 months. Ack! That means I can’t do layout, photo adjustments, or anything else that takes just a ton of mouse clicking and keyboard shortcuts. I can still write thanks to speech to text software but not much of anything else.

Translation… I have had to make the decision to halt production on The Polymer Studio magazine for the time being. I’ve also decided subscription purchases will not be available during this time because I just can’t take money for something that isn’t actively in process. That just feels wrong. And yes, I considered bringing on people to help but it would take a while to get anyone up to speed on graphics and editing work and if I’m going to work on myself, I can’t add to my schedule. My crazy long workdays are why I’m having the physiological issues, so I really have to take a pretty full break.

So, I’m making plans to play around with creating some other stuff that would be doable with written, spoken, or videotaped content because I am just not good at not being productive. But without deadlines, I can take my time. And, yes, I do plan to continue to post the blog. I like chatting with you all too much to stop if I don’t really have to!

So, some weeks I might have to go a little bit light, but I do plan to be here to join you on Sunday mornings for low contemplative art. Do please join me next Sunday – I’m putting together a survey to see what you all would like me to talk about on the blog and my other possible projects. I’m working on gathering goodies for a giveaway to go with the survey so don’t miss that!

Have a wonderful, creative, healthy, and inspiring week!

Questioning Focus

July 7, 2019

“Fabiclay” brooch by Klio Tsaliki

Are you one of those people who finds an interesting path and goes down its until you find the end or do you like to wander about? I know that’s kind of a vague question, but you could apply it as a metaphor to goals in your life, the path of your career, or the way you create your artwork. I recently read some excerpts by Thomas Edison on the importance of keeping focused. He said, “The one prudence in life is concentration, the one evil is dissipation.” I don’t know if I wholly agree with that or, at least, I think it’s not so readily summed up in one tidy sentence.

I bet you can come up with at least a couple of artists off the top of your head who have come up with a treatment in polymer clay that they create with almost exclusively and have become quite masterful at it. But I think you come up with quite a few artists who consistently try different things, exploring, growing, and changing their style and focus on the artwork. Would you say that the person who focuses is probably doing better work than the person who is constantly exploring?

Perhaps it’s because we are talking about art that I can so readily dismiss Edison’s comment. I have always thought that, for most artists, art is about the exploration. I think if you find one technique and worked very hard to perfect it, you might get overly comfortable because you will more likely succeed with each successive piece as you hone your skill. And yes, I am presenting that as a possible problem. I am a strong believer in the value of messing up and creating pieces that “fail” on some level. It’s those experiences that really teach us and allow us to grow as artists. However, I do think that masterful artists who stick with one approach do, especially in their mind, make a lot of mistakes and have numerous pieces that failed or fell short of the artist’s expectations for every piece of work we would deem a masterpiece.

The bottom line is, I think whatever journey your imagination and curiosity leads you on is the right path to follow with your creative work. Don’t fight it if you like to stick with one technique and refine it over and over or if you get easily bored once you feel you’ve mastered something enough to understand it and want to move on to the next challenge. The journey of our creative process is as individual and unique as our own artwork.

Let’s look at a few examples of people on both sides of this coin – those dedicated to a primary technique and those that constantly change their focus. Then you can decide for yourself if Edison had a point or not.

Single Minded Tangents

There are so many artists that come to mind that focus on a single technique or process and have mastered it to a mind-blowing extent. Elise Winters is one of the first that comes to mind when it comes to technique. This surface treatment was her signature and her legacy and no one, that I’ve seen, has yet matched her skill with it.

 

When it comes to form, I don’t think anyone else in the polymer community has made more of the same form than Ron Lehocky with his hearts. But here’s an example of staying focused on one thing while exploring just about everything else you can. He’s made tens of thousands of hearts and no two are the same. Here are examples of the variations he came up with from a single Skinner blend.

 

One of the most masterful and single-minded people of process would have to be Jon Stuart Anderson with his cane covered animals and functional objects. Although caning is his focus as far as technique, he is constantly exploring pattern and how it affects the form. It’s a subtle exploration but if you look back through his work you’ll see how the application of pattern has changed over the years and how he is constantly exploring new forms to apply them to, working on how the new forms will show off the canes or how the canes will accentuate the forms.

I love this bowl below. It shows more “quiet space” with those swaths of black to red canes, than I think I’ve ever seen in his work before. The relatively unpatterned area so dramatically contrasts the complex canes designs but you can take in the individual cane and pattern placement more readily because the eye has a place to rest, giving you a moment to rest and to process more of what you’re seeing

 

This whole subject matter recalls to me a conversation Rosanna Faillace and I had with Melanie Muir in Rome last year. We were talking about people who stick with one technique and don’t branch out and Melanie, seeming to think it might be a negative thing, said “That’s me. I’m a one trick pony.” But of course, she’s not. She loves her inlaid mokume gane veneers, but she is constantly exploring construction and different forms on which to present these, resulting in pieces like this beautiful bracelet.

Frenetically Fabulous

I myself am of the exploratory variety of artists. I do wish I had a little more focus and could spend more time on any single technique, form, or process, but the thing is, my curiosity about what else I could do is a stronger driving force, so I go with that. There are a LOT of us artistic explorers in polymer art as polymer just cries out to be explored.

When it comes to an exploratory approach in polymer, Debbie Crothers is the first person who comes to mind. You can see her gorgeous acrylic on polymer beads on the front of the upcoming issue of The Polymer Studio. Her penchant for exploration is why she is writing the “Mix it Up” articles in the magazine. She always has something she’s playing around with and she does love to share. She does occasionally show the results of both her good and not so successful explorations, which I love because it demonstrates her willingness to try, to make mistakes, and to do the work over and over again until she has mastered it. It is highly unlikely that Debbie would have gotten the results she got in these beads below if she didn’t go through a lot of trial and error first. The final results are well worth the exploration!

 

Another person I’ve been following for years is Klio Tsaliki. She’ll try almost anything and, in the process, comes up with some great techniques and approaches. Some attempts come out better than others, but I love that she shares it all, or at least enough for us to see that she is not afraid to try anything that interests her. I find that very inspiring. A couple of years ago she was playing with metallic silkscreen and the possible fabric-like quality of polymer, as you can see in the opening photo of this post. More recently, she’s played with translucent clay and LED lights, as seen below.

Klio’s newest work has been in the up and coming new clay from Fimo, “Leather Effect”. Once cured, this clay is supposed to be very much like leather. You can see here on the Fimo website that it is very pliable and can be cut and even stitched. I don’t know about you, but I have never been so excited about a new line of polymer clay! It’s not available in the US yet, and I don’t know how widely distributed it is in Europe, but there is supposed to be news about that soon and, trust me, when it is available, I’m going to be playing with it quite a bit as leather was one of my first materials I made jewelry from. You can go to Klio’s Flickr photostream to see what she’s been doing with it.

Another name for exploration is pioneering. Pioneers need to explore their subject extensively to find those new and intriguing aspects that lead the rest of us to their fresh finds. In general, you’ll find that most of the folks we identify as polymer pioneers were and are highly exploratory. Just look at what Kathleen Dustin has done throughout her career. From ornate purses to translucent layered brooches to reinterpretations of textile patterns such as with these new brooches below, you never really know what Kathleen will be working on next and yet, all her work is masterfully constructed and impeccably finished. I think her exploration keeps her work fresh for us and, most especially, for her and her passion for her work.

 

Focus on Yourself

So, as you see, there are many approaches to the creative process, all of which have value and result in beautiful, emotive, and inspiring work. So, no, I don’t think focus and concentration on one technique, form, or even material, is necessary but I do think keeping a sharp focus on the overriding creative goal – to make fulfilling artwork, financially supportive artwork, satiating your curiosity, or whatever the important creative motivation is for you – is something to keep a watchful eye on.

Speaking of focus … The construction on my house is in the finishing stages now. That hasn’t helped me with my focus on getting the next issue out, neither has my tendinitis and back issue which was such a huge problem last year. The thing is, in the last year, I have not really had enough time off to completely heal and am having issues again. I’m pretty sure I can get this issue to the printer in time to have it out by the end of the month but I’m probably going to have a heart-to-heart with my doctor on what I really need to do to get this healed and am working out a bit of time off later this month. This is one area where keeping focus would be very helpful!

I will keep you apprised of any shakeups in production if you are a subscriber to The Polymer Studio so just stay tuned here. And next week maybe I can get you pictures of the house for those of you who are curious. Everything’s under plastic wrap right now as they finish plastering and painting. But it’s horribly exciting seeing it come together!

So, I will leave you with these thoughts on focus and exploration. I hope it brings you some interesting insights for your own process and work. Have a fabulous week!

 

Flower Powered Polymer

May 5, 2019

Kathy McCurry, Bearded Sadie

Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers

So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.

Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.

Flower Power

first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.

What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.

It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.

 

Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.

Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.

 

Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.

 

Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.

 

But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.

 

Moving on From Flowers

To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!

The Polymer Studio, Issue #2 … click the image to see a sampler edition

Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.

 Looking for your already purchased copy?

If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.

Print editions of the new issue went to the post office Wednesday  directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.

 

 

I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!

 

Splitting the Difference

April 21, 2019

Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night  … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)

So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.

I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!

So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?

 

Splitting the Canvas

Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.

For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.

 

Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)

Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.

This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.

 

And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.

 

Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.

 

You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.

 

 

Splitting up is Not Hard to Do

If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!

Here is a simple series of steps you can try right now … A Cane Split Canvas:

  1. Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
  2. Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
  3. Burnish the canes into the clay sheet so the surface is smooth.
  4. Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
  5. Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
  6. Once you find the section you like, cover it with plastic wrap and cut with your cutter.
  7. Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.

Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.

You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.

Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!

 

Now for the Great Tile Adventure

Story time! For those entertained by the little dramas of my little life.

So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!

Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.

So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!

Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!

I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!

So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.

The Contrast Conundrum

What would you say is the area of your craft that you most need to work on? Is it a skill that you want to acquire or improve? Is it simply getting yourself to do more work more often? (I know that’s one of mine!) Or is it some particular approach to the work that regularly seems to baffle you?

For me, I have always struggled with contrast. It’s not that I don’t like contrast, I just tend to like it done subtly. But if I am too subtle, the work lacks energy. On the other hand, if I consciously push it too far, it doesn’t feel like a genuine expression of mine. So, the idea of contrast is often on my mind when I am working.

First, let me correct a misconception that some people have. You do not have to have a high contrast in your work to create a good design. There can be little to no contrast in a piece and it can still have a beautiful design. Contrast is about the degree to which elements such as color, texture, pattern, shape, size, etc. are dissimilar or alike. Like anything else in design, good use of contrast comes down to making an intentional decision about how you will use it in your work.

For instance, high contrast tends to be high-energy and bold while moderate contrast comes across often as refined or restrained, and little to no contrast tends to be quiet and reserved. These descriptors are not always true because the level of contrast plays differently depending on what design element is being contrasted and how it works with (or against) other characteristics in the work.

Okay, enough jabbering on about these abstract concepts. Let’s look at some examples and get those little gears in your head turning as you ponder how you use contrast now, or how you would like to be using it.

Compare and Contrast

One of the most common ways to develop high contrast, especially in polymer, is with color. From canes to mokume to silkscreened veneers, high color contrast is the only way to have the effect of some techniques even show. But at the same time, minimal color contrast with little value change can result in lovely but subtle marbling, it helps support the dreamy feel of blended alcohol ink techniques, or allows us to showcase texture or form while color is relegated to a supporting role.

One of the most foolproof ways to use color for contrast is to go black and white. But if you go that extreme, you will probably need to heavily play up other design elements such as form, pattern, line, or texture. Or, you can put other colors into play.

That’s basically what Lynn Yuhr did with this earring and pendant set. The primary high contrast is a black border surrounding a white background. That’s simple enough, but then she throws a variety of colors in there, both warm and cool ones from across most of the color wheel. Then she goes for contrasting shapes by including both the softness of circles and the sharp angularity of triangles. Not only that, (this is really a piece all about high contrast!) she includes both solid shapes and thin lines. Some shapes are floating and unattached while others are overlapping, and some lines are solid while others are dashed. Often, this much variation can become chaotic and ungrounded but everything here has clean, defined and very graphic edges and she only chooses 2-3 variations of each design element. But the most grounding aspects are the black frame holding it all in and the swath of white being the common “floor” that this is all scattered on. It is energetic and yet contained, fun but still sophisticated. You can see, in the opening image, that she uses a similar approach but goes for full washes of color as the background, for slightly less dramatic contrast.

 

Have you ever been told to not wear plaid with polka dots at the same time? Well, you can if you play it right, pushing the contrast by adding even more pattern to your outfit so that is an obvious intentional choice. You’ll often find this approach in the work of Louise Fisher Cozzi. This necklace below has many different patterns. Some are very regular, while others are more organic. Most are rather busy but then there are those strings of solid pieces with nearly no pattern but for a slightly uneven glaze of color. Regardless of all these contrasting patterns, they have a connecting commonality in their circle form as well as being in a limited range of color saturation (pureness of color), giving what would otherwise be a cacophony of visual texture, a necessary cohesiveness. The result is a sophisticated kind of fun, sure to draw a bold, gregarious, and fun-loving buyer to this work.

 

Tactile texture can also be used as a contrasting mechanism in your design. An easy way to achieve contrast with texture is to have a smooth surface and a rough surface. It could be as simple as part of the work being highly polished and part of it sporting a matte finish. You can create textural contrast without going for the smooth versus rough by having two types of rough surfaces. That still contrasts if a bit more subtle.

The gorgeous Jenny Reeves earrings below, a metal, rather than polymer example (although there are plenty of folks who do similar texturing in polymer) has plenty of contrast although it does not jump out at you. The matte silver on the sides of each circle contrasts with the rough reticulated metal but not jarringly so. The matte finished silver moves to rough silver moves to rough gold so that there is only one level of change between each of those three treated sections of the circles. This somewhat gradual change diminishes the impact of the contrast resulting in a softer feel. Imagine how this would have looked if it went from matte silver to rough gold without the transitional section? It would have a very different feel.

As I mentioned, going for low contrast has its place and advantages. Dorota Kaszczyszyn doesn’t generally go for high contrast, but that is probably because she focuses primarily on her imagery and creating the forms and textures to bring her fantastical adornment to life, as is evident in her Water Dragon necklace here.

It’s not that contrast doesn’t exist in this piece – there is certainly contrast in texture, especially on the wings, going from a dimpled cap to a feathery brush below. However, all the surfaces have some kind of hand tooled texture, minimizing the contrast in that regard. The colors also have a minimal contrast, going from silver to a similarly shimmery brush of color using an interference green/purple powder, a color scheme echoed even in the focal shell on the dragon’s back. This low contrast gives the necklace, and her creature, a quiet grandeur, but it is not bereft of energy, instilled with a light but rippling liveliness through the texture and the flow of the shapes.

 

A Contrasting Evaluation

If, after seeing the ways you can work with contrast, you feel inclined to play with the way you use this design element, you can do so with some simple exercises.

Color is pretty easy to start with. Starting with a color combination you commonly use or tend towards, replace each color with the same hue but choose colors that are much darker, brighter, lighter, or subdued than the other colors. You will want the colors to have at least one characteristic in common (like they could all be very saturated or all be very light or they could all have a bit of black added to them) to keep the combination cohesive. You could also simply take out a bunch of blocks of clay and create several color pallets by shuffling them around – one high contrast, one meeting contrast in one low contrast. See which one you like the best.

If you want to better understand your options in color, grab Maggie Maggio and Lindly Haunani’s Color Inspiration book, or for a more condensed overview, grab your copy or get the Summer 2017 issue of The Polymer Arts which is all about Color! (We still have that 33% off 3 or more magazines sale going on and you don’t need a promo code for it now.)

You also can do a self-evaluation by grabbing a few of your favorite pieces, as well as a few pieces that weren’t successful, and looking at the difference in contrasts in the following areas:

  • Color
  • Texture
  • Shape/form
  • Size of forms or motifs
  • Pattern

See if you can identify where contrast worked well in the successful pieces and maybe where it could have been improved in the less successful ones by simply imagining increasing or decreasing contrast in each of the design elements listed above.

If you’re one of those who likes to make lists, copy these five design items out onto a piece of paper (or into an Excel sheet if you like those) and for each piece you have, identify whether the contrast is low, medium, or high for each design element. Then if you look at your evaluation list, you may find that you always have low contrasting color or high contrast in pattern, or vice versa or that, in general, you don’t work in high contrast or you never try low contrast. Whatever you’re not seeing a lot of, try to consciously create designs that push you out of your comfort zone.

Now, as I mentioned at the beginning, I don’t like to push high contrast in my work so it may seem funny for me to ask you to do something that goes against your norm, but I was only able to determine my preference because I did exercises like this. Push yourself like this can really help you discover a lot about yourself as an artist.

But if you’re more of the low-key, intuitive type, just keep contrast in mind next time you’re at the studio table. Like any design consideration, your work can be improved simply by being aware of whether you are making conscious decisions about design. If you are now more aware of contrast, you may find you’re able to more easily identify why a piece may not be working by checking the contrast and asking yourself whether low or high contrast or something in the middle would best serve what you’re trying to express or the type piece you are trying to create.

From Behind the Scenes

On that note, I am going to go work on the contrast that exists in my life between having a normal living situation and figuring out how to work and live in the beginnings of a halfway gutted house. But I always like a challenge!

I almost have my makeshift outdoor kitchen ready! Grill cleaned and ready for action. Check. Camp stove hooked up to grill size propane tank. Check. Camp table/sink with an actual running faucet via my garden hose set up. Check. Yep … no crazy construction is going to keep me from my creative cooking!

Now I just need to make covers/cozies for my instant pot and my non-polymer countertop oven so they can sit outside more or less protected from the elements. Then … I need to clear space in the studio for the refrigerator. I have always said that one’s studio or office should be as far away from the refrigerator as possible to discourage unintentional grazing so I’m seriously breaking my own rules here! Didn’t I just say I like a challenge? Maybe I should have clarified how much of a challenge I like. *sigh*

I’ll be juggling all this while I am in the midst of polishing up the next issue of The Polymer Studio but have thus far been able to stay more or less on schedule. Just don’t miss out on this next issue!

Issue number two of The Polymer Studio has a wonderful collection of projects for you as well as a tour of Christine Dumont’s studio (so exciting!), an interview with the uniquely creative Cynthia Tinapple, stencil explorations with Debbie Crothers and much more! We would love for you to join us in The Polymer Studio… Just subscribe to get your plethora of polymer fun and inspiration. Your subscription also supports this blog and all the polymer obsessed artists that have helped to create the beautiful content of our publications.

Thank you for your continued support! Enjoy the rest of your Sunday and have a creative and inspiring week!

 

 

 

Mixing and Mingling, New Cover, & 33% off Back issues

We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.

We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.

All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.

(Be sure to scroll down to the last section for the 33% off sale stuff.)

A Fine Mix-up

So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.

One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.

Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!

So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.

Mixed Directions

Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.

This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.

 

Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.

 

With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.

The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.

 

Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.

 

Putting Together Your Own Mixer

This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.

You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.

In fact, let’s have a sale!

Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.

And … I’m Off!

I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up.  But talk about mixing it up!

So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!

Hole-y Design

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Radiating Variety

August 11, 2019
Posted in

Would you say you creatively lean toward symmetry or asymmetry? Although humans are innately attracted to symmetry, we all lean towards one or the other when it comes to our aesthetic preferences. However, symmetry, which represents order, is generally found to be more pleasing to the brain than asymmetry but, interestingly enough, symmetry alone cannot make something beautiful. That’s because that orderliness can get rather boring.

This is not to say that symmetry is automatically boring, because it certainly is not. It’s all a matter of how much energy the other characteristics of that symmetrical design add to it. However, there is a kind of artistic prejudice against symmetry out there sometimes. It’s this kind of default line of thought that symmetry is not only boring but a kind of cop-out in design, that it is something primarily employed by the inexperienced and unskilled aspiring artist. That always struck me as really ridiculous. Did they think that Mother Nature should rearrange the flowers, the growth of crystals, and the patterns of butterfly wings? Because they are all symmetrical and yet, these are some of the most beautiful natural things in our world.

So, make note that it’s not symmetry that makes a design boring, it’s a lack of energy in the design. Making exciting, energized, and intriguing symmetrical work can actually be challenging so when someone does it well, it can be quite impressive. Asymmetry has an innate sense of energy simply because it is off-balance and our brain, the way it is, always thinks things are moving towards balance and thus sees asymmetrical design as something in flux. So really, asymmetry might be considered a kind of a shortcut to an energized design although, in truth, both symmetry and asymmetry have plenty of challenges to contend with when designing.

There is one type of symmetrical design, however, that does have both balance and energy almost automatically included. This is the beautiful radial symmetry seen in nature in everything from starfish to flowers to snowflakes. Its energy comes from lines or a progression of shapes moving out from a central axis. The movement in this kind of symmetry is strong and directional but it can still verge on the boring if the radiating lines do not have variation.

Let’s look at some examples of beautifully done radial symmetry.

 

Going Around the Axis

We see radial symmetry in polymer all the time, particularly in kaleidoscope canes. The process of slicing and reassembling the canes with the same point in the pattern arranged at the center creates radial symmetry. There aren’t necessarily radiating lines in these canes, but the mirrored shapes tend to create points or a kind of visual growth outward.

Here’s a beautiful five-sided kaleidoscope cane – yes, symmetry can have an and odd number of sides because the design is still consistent around a central axis – whose parts have a sense of growth moving outward. This is by the very adept cane artist Lana Fominicheva of LaFom on Etsy.

 

A more direct production of radial symmetry can be created by building with a collection of elements such as in this quilled cane design by Meg Newberg of Polymer Clay Workshop.

Cool canes, right? You can get Meg’s Quilled Cane Tutorial in her Esty shop and get to making your own as soon as you download it!

 

Radial symmetry that is neither straight nor separate lines or progressive shapes can still create energy and interest while still staying symmetrical and beautifully balanced as seen here in this locket by Ola of PinkLaLou on Etsy. The crossing over of the lines in the central image are highly energetic and flow out more than burst out from the central axis but flowing lines are still energized only in a calmer, perhaps more elegant, way.

This is a locket created with filigree and cold enamel, not polymer. At first, I thought maybe the design in the middle was cold enamel, but I think it may be an image under resin. Cold enamel is a pigmented semi-translucent resin created to look like traditional glass enamel. If you love the look of enamel but have neither the equipment nor the patience to learn that amazing craft, cold enamel might fill the bill for you. But in the meantime, you could start a radial symmetry design with the right graphic using a liquid polymer image transfer.

 

Okay, so now that you’ve seen a few examples, would you say this next piece below is radial symmetry? Scroll down before reading on and just take a quick peek. Its looks like it is, right?

Well, technically no, it isn’t, but it has all the initial markers with a central axis from which elements radiate outward in a similar pattern. However, nothing is actually symmetrical from one side to the other. Our brain perceives balance because the progression from the center feels consistent, going from radiating lines of inlaid polymer to an even boundary of solid silver to a filigree of swirls and set gems that fill the outside perimeter. But all the elements have an irregular placement, especially in the stones and swirls outside of the focal center but also in the thickness, pattern, and coloring of the inlaid polymer. So, this pendant echoes radial symmetry without being symmetrical thus giving it a tremendous amount of energy without feeling chaotic. Pretty cool!

This necklace, of course, is a Liz Hall creation. Liz has been one of my polymer heroes since nearly the beginning of my exploration into the material. She combines precious metal clay with polymer inlays, adding in stones, glass, and other shiny bits here and there as well. Her openness to other materials allows for this broad range of exploration in design and yet she has a very distinctive style. If you look closely at her work, you’ll see every regular pattern and design is just a touch off, including the pendant that opens this blog post. That’s part of her signature style. Simple but effective.

 

Of course, the most quintessential of radial symmetry design is the mandala. Much of the radial symmetry we see could be considered mandalas of sorts, if we are just speaking of the geometry of it. Mandalas are, however, traditionally a reference to a kind of spiritual map, one that was originally meant to be a model for the organizational structure of life, in both the physical and metaphysical sense, and consisted of a square with a circle and four T-shaped gates, one facing each side of the square. But, as you might have noticed, that definition and the base design has been broadly extended. As long as the design has a regular structure organized around a unifying center, it seems to be generally accepted that it can be called a mandala.

We see these mandala structures in polymer pieces created with cane slices a lot but it is also readily achieved with layered polymer elements like these layered ornaments Kay Miller used to make. She’s off focused on dimensional greeting cards now but we can still enjoy the images of her perfectly designed and finished ornaments.

 

Mandalas are certainly not relegated to polymer when it comes to artwork. And it’s not just about those dot painted rocks that are all the rage now either. Take a gander at this gorgeous mandala brooch created by Jima and Carlie Abbott of Mixed Metal Jewels.

So… do you use radial symmetry in your work? If you don’t or haven’t done much of it or simply haven’t thought much about it, maybe it’s time to try it out. It can be very meditative. See for yourself!

 

Best Laid Plans

Well, this week I was going to start casually working on plans for future publications and new projects between physical therapy and catching up on sleep, but chaos reigned here at the house. Again. There was light at the end of the tunnel when we suddenly went from being a couple of days from finishing the house renovations to a couple of weeks.

The appliances were in and the final painting had commenced but then we discovered that the floor had a problem along with more damage than was anticipated so instead of simply repairing our flooring around the construction areas, we had to tear out nearly half the flooring in our house! Talk about frustrating! And depressing. And nerve-racking. Blah.

But, long story short, we worked it and persisted until we found something we could afford and miraculously ended up with this gorgeous acacia wood flooring and a crew that rushed in and got it all taken care of pretty much in one day! It was nuts. There were so many guys here, it was like ants in the house. But it was by far the best work done on this whole project. Here is my husband Brett, just super excited about his new floors, in our nearly done kitchen.

 

I’m pretty sure his expression will change when we sit down to pay the bill though. But at least we can drown our sorrows over a glass of wine in a gorgeous new kitchen.

Or a glass of seltzer in my case. My metabolic issues are dampening my potential to celebrate or drown my sorrows in my family’s traditional Irish way. No sugars including alcohol for me for a while, not until my metabolic issues are under control and it’ll be minimal even then. It’s sad but it’s really nothing compared to what some of my other friends are going through right now. All you wonderful people … take good care of yourselves! I don’t want any more troubling health news. Ok?

On the positive side, my arm is much better even after this one week with minimal computer time. It is starting to hurt now though, but only because I keep forgetting to not type! Three decades of writing for a living and it’s hard not to use the keyboard when pain is not there to readily remind me not to. I’ll learn!

So, the word now is that we should have our house back in a week. Then I can start cooking properly and really button-down on the new diet regimen I have. So, keep your fingers and toes crossed for us as I will keep good, positive energy and prayers flowing out to all of you with challenges going on right now.

Have a beautiful, creative, and inspiring week!

Read More

Crosswise Crafts

August 4, 2019
Posted in ,

Heather Campbell – “Keep Circling”

If you read this blog because polymer is your primary art material, do you consider yourself a polymer artist or a mixed-media artist? This question has arisen in a few conversations recently – how to identify oneself as an artist – and also in regard to the content of these blogs posts because a lot of people that are writing me of late have turned out not to be primarily polymer artists, or at least identify themselves as mixed-media rather than polymer artists. I think that’s really cool and I don’t find it terribly surprising that people who work in other art materials are interested in polymer because polymer has so much crossover and such a wide range of possible applications.

I mean, is polymer clay the only material in your art studio? Aside from maybe dedicated caners, I think the majority of us who identify as polymer artists also have drawers and bins and boxes of other things like beads, fabric, paints, paper, resin, and so much more. So, is your polymer art really a type of mixed-media art? And what is mixed-media art really anyways?

And most of all… do the labels really matter?

Labels are important for the purpose of organizing all the information we are inundated with daily, but unfortunately, it also puts people and concepts in restrictive boxes and that can become problematic. When someone is labeled (or calls themselves) a polymer artist, it doesn’t mean that they work only with polymer or even primarily with polymer. They may simply have an affinity for the material more than any other single material.

Not only do we use a lot of other materials in polymer work, but we can also so readily draw inspiration from looking at artwork in materials. I, myself, find fiber art to be an immense resource for ideas in my polymer work, especially modern quilting, so I thought I’d bring you along to explore some of the ways today’s quilt art and polymer creatively crossover.

Crosswise Crafts

Quilt art is a form of fiber art which pushes beyond functional bedcovers and quilted clothing of the past. Fiber Art itself is a relatively recent term, first used shortly after World War II to categorize fine art using natural or synthetic fiber as the material. This speaks to how relatively new the focus has been on fiber as an art form. Luckily, the term quickly worked its way out of the relatively elite world of curators and art historians into a more generalized use encompassing all fiber-based artistic applications, from weaving and quilting to intensely detailed embroidery and monumental outdoor installations.

There has been a tremendous amount of experimentation going on in fiber arts since the latter decades of the twentieth century, something as polymer artists we understand and applaud but, unlike polymer the many forms of fiber art draw from some of mankind’s oldest crafts so experimentation tends to rally not around techniques but around form, nontraditional materials, unusual use and placement of materials, and conceptual approaches, especially those involving cultural issues and activism. This makes it a rich source of inspiration that can really light the way for new possibilities in polymer.

As I’m sure you know, not only do we emulate fiber in polymer, we also have methods of construction and layout with veneers and inlays which use basically the same approach as quilting, less the sewing. Both art forms also technically work in three-dimensions but are commonly composed in two-dimensions which is why I think it’s such a great arena to look to for a creative shot in the arm.

Here is a very direct example of the crossover between quilting and polymer. Lindly Haunani draws the patterns for her polymer quilts directly from classic quilt patterns, like this one based on a half square quilt design.

She uses these wall pieces to examine and teach color. She also applies the concepts to brooches like these lovely pieces.

By the way, Lindly has a series of workshops teaching color through the creation of veneers and polymer quilts coming up in late August/early September at Creative Journey Studios. You can check those out here.

 

Although classic quilt patterns pop up in polymer quite often, contemporary quilts are nothing like these. Here is an example of traditional quilting techniques but without the traditional patterns by Lisa Jenni. Do the colors or composition poke at your creative brain but with polymer on the mind? It could be an arrangement with alcohol ink dyed polymer, striped canes, and stamped clay medallions, right?

 

That quilt reminds me a little bit of Gera Scott Chandler’s work. The colors and the emphasis on oblong circles are probably the connections but you see how one could possibly inspire the other, yes?

 

And how have we not seen something like this piece below done in polymer? This is embroidered quilting by Susan Lenz It’s less than 3’ x 2’ so such a piece in polymer would not be a monumental task. This has given me an idea … I think I know what I’m going to do with all the inchies collected over the years. Let’s all make wall pieces from our collections!

Be sure to look at Susan’s Lancet window series too. They have a similarly open layout but in kind of stained-glass patterns.

 

Contemporary quilts, like polymer, are not restricted to a two-dimensional canvas or flat layers. There are a lot of things being added into and onto quilts today. Just look at this riot of wonder by Molly Jean Hobbit.

Does this piece bring to mind any polymer artists who also use lots of pieces and materials in their work? Maybe Laurie Mika, Heather Campbell (as seen in the opening image), or even Christi Friesen with her mixed-media mosaics? If you have always liked what these ladies are doing, just imagine the fresh batch of ideas you could get from contemporary quilts.

Want to really delve into the quilt world now? You go down a rabbit hole by simply putting “quilt art” into Pinterest, or you could start on the Contemporary Quilt Art associations gallery pages. Click on each image to get a whole slew of additional quilts by various artists. It’s quite the fabulous (and possibly time gobbling) rabbit hole to go down.

Want to do a little polymer quilting of your own today? Well, you could sit down to this video by Jan Montarsi, demonstrating how to make striped polymer quilt squares. Mind you, he uses his new Create Template, but you could do it without the template if you want to get right to it. If you have the latest edition of The Polymer Studio, Issue #3, go to Jan’s article on multicolor blends first to make some really bright and saturated blended sheets to work with. If you didn’t subscribe or purchase your copy yet, you can get an immediate digital download or order a print edition on the website here. And you can get Jan’s templates here.

 

Where Two Crafts Collide – working with the Craft Industry Alliance

So, my curiosity about this mixed media labeling question pushed me to do some research early last month and, in the process, I found the Craft Industry Alliance. This is a fairly new organization – it was created in 2015 – but it is growing quite quickly as an information and supportive advocacy trade association for all working craft artists – this includes you!

I really liked that this organization recognizes craft art as a broader community that is not segregated by material or form. Since the founders are primarily fiber artist, however, it started out heavy in that arena, but they are actively growing into other communities. I know this because the president of CIA (gosh, their acronym sounds so covert!) contacted me after I joined their organization online with an earnest request to get to know the polymer community better. After a lovely chat and a few emails, we are now working on polymer based content for the Alliance. How cool is that?

So, what is this organization and what might it do for you? Well, here is the skinny, straight from President, Abby Glassenberg:

Craft Industry Alliance is a community of craft professionals. Strengthen your creative business, stay up to date on industry news, and build connections within a supportive trade association. Artists who are interested in becoming teachers of their craft, writing books, and showing their work in galleries need to think about setting up a solid business foundation from which to grow. Marketing and branding, legal, accounting and tax issues, social media and blogging … these are all issues creative business owners need to think through. Don’t do it alone! Come together with 1,300+ fellow members in a supportive community where you can find solid answers to your questions, make connections with the right people, and find the resources you need. Check it out at https://www.craftindustryalliance.org  

As you can see, the organization is focused on active artists who show and sell their work or promote themselves as teachers or writers. It doesn’t really matter how small or how big your creative operation is, you’ll always benefit from a little help and I think it’s a fantastic idea to have a community of people from all areas of craft supporting each other. I’ve always been a little worried that the polymer community has remained a bit insular since we have issues that few other material arenas have, being such a very young material, working with a plastic in an environmentally sensitive world, and battling the “kids art material” image. But growth in this community will come from the outside, not from within so the more we reach out and network with other craft artists and the larger craft community, the more energized and innovative we will be as a whole and that will keep the community growing and vital.

The Sage Sabbatical

So, as most of you probably know by now, August starts my little sabbatical from production work on print publications so I can attend to some health issues. I have to admit, it’s made me a little depressed. It’s just rather sudden and I’m such a workaholic and so used to having a deadline hanging over me all the time so it’s a little unnerving. Luckily, it actually started out busy since we wrapped up the release of The Polymer Studio Issue #3. It turned out just beautiful and we’ve already received so many great comments on it with particular excitement around articles like the fascinating story of Brazil’s polymer master, Beatriz Cominatto, Debbie Crothers’ acrylic and polymer exploration, and Jan’s multi-color skinner blend techniques.

If you’re waiting on your copy, the digital edition went out on the 31st – check spam/junk mail folders if you’re due one and didn’t see it in your inbox. Print editions went to the post office this past Wednesday, so they are on the way too. I have my batch of stock here if you need to order it. Just go to the website.

We also added a Special 3 issue Package of all three of The Polymer Studio issues if you need to do some catching up.

If you’re unfamiliar with my silly little situation that forced me into taking time off, you can find the more-or-less full story in our most recent newsletter here.

If you don’t get our twice a month newsletter, signing up for the newsletter is one of the best ways to stay informed on our publications and new projects, of which there will be something before the year ends even if I can’t do print! But yes, I promise I will not overextend myself and do with the doctor orders!

Speaking of which … I should go now. I hope you are excited by the peek at quilts and the connection to polymer. Have a wonderful rest of your weekend and an inspired week!

Read More

Rousing Repetition

July 28, 2019
Posted in , ,

Neon Paper beads necklace by Devi Chand.

First of all, thank you to all you amazing, wonderful, caring folks who sent me notes and words of encouragement and offers of help and even a book in one case, all due to my little tendinitis issue. You are the most amazing people. What a fantastic community we have! I expect most of you are dealing with something frustratingly disruptive in your life and things a lot worse than my little annoyance in many cases so know that my heart goes out to you too. Life is challenging. So, let’s go out and wrestle it and show the universe what we’re made of!

I do have more news but I’m going to save the update on my situation until the end so you can enjoy some artwork first.

Okay, on to the contemplation of art!

Rousing Repetition

This week I want to talk about repetition. Do you like heavy repetition in artwork, where a single form, mark, or motif is repeated over and over? Saying it like that makes it sound boring and unimaginative. But I think repetition has gotten a bad rap. I mean, sure, in some circumstances, like when someone says the same thing over and over again in a conversation, it is going to get on your nerves. But when it comes to design, repetition can be mesmerizing, energetic, and downright stunning. The trick is to put some rhythm and variation into that repetition. Or at least, if it’s very static, it’s best if it is obvious that a lack of variation is intentional to convey stillness, poise, or something of that sort.

I thought we’d pull up some really beautiful examples of repetition to prove the point. You’ll note in all these pieces that although form, shape, motif, or other characteristics are repeated, variation in other aspects of the design choices brings in the energy and rhythm that draws us in. The repeating element also serves to create cohesiveness and unity amongst all the other elements

So, as we go through these this week, identify the repeating design elements in each piece and then the variation that makes the repetition so interesting for you. I’ll show the piece first before I talk about it so you have a chance to consider and see what you come up with. Mind you, you will often come up with things that I won’t and that doesn’t mean that I’m right and you’re not. When art is viewed, it has to be fundamentally about personal interpretation so there is a ton of room for your unique point of view. Asking yourself these questions that I periodically challenge you with just gets you to actively think about the work, homes your eye, and, hopefully, gives you the understanding to verbalize those things so you can translate them into aspects of your own work.

So, let’s get to it!

 

Music in the Monotony

I am going heavy this week on non-polymer artists and I may do a bit more of this going forward too. There is just so much great design amongst craftspeople of other mediums that we could really learn from. I find it refreshing and immensely inspiring to consider how to get the aspects that I enjoy in the artwork of other mediums into my polymer designs. I hope you agree and will stick this out with me! But we’ll start with polymer work.

Here we have some really obvious repetition with a couple of bracelets from Maria Belkomor. A lot of things are being repeated here. How many do you count?

Depending on how you count, there are either two repeated elements– the black carved beads and the disk elements – or maybe four if you count the stacks of beads and the colors. Or maybe you counted more. Everything in these are repeated except for the clasps so pretty much every element can be counted as a repeating one. Variation and, especially, the contrast in the colors and the contrast in the shape between the round beads and the flat disks is what keeps the repetition from being boring. It’s very regular but the bracelets are still fun and visually engaging pieces.

 

Keep in mind, repetition doesn’t mean it needs to all be lined up to engage repetition. Take a look at the pieces below. Parallel lines are used over and over again but aren’t always the same types of parallel lines nor are they seated in the same orientation.

Anna Nel has a lot of fun with her bouncy graphic look by repeating parallel lines over and over but varying them from solid line sets to lines of blended clay, adding pops of color and focal points with the irregularly placed round cane slices. Her variation in color, going from black-and-white to very saturated hues doesn’t hurt the impact of these pieces either.

 

Looking outside of polymer, it is not hard to find gorgeous examples of repetition in construction jewelry like beadwork.

Obviously, the repetition here is primarily in the square beads, all lined up with the same orientation, as well as the repeated dangles. The designer, Beth Graham of Semper Fi designs on Etsy, switches up the color in the squares and the length of the dangles for a simple but very effective variation within the design. There are much more intricate bead designs out there, but I like this example because it highlights the concept in an easy to identify way and works to great effect.

 

I wonder if, in polymer, we might use repetition more often if it was not so easy for us to vary up our elements. I do think there is such a discipline in trying to create dynamic and intriguing pieces without using a wide range of variety to carry it. Just look at this necklace below. It could be polymer but is gorgeously carved, colored, and polished wood.

Liv Blavap’s works are amazing. She works with repetition in a way that it somehow becomes the focal point of her pieces. I think it’s because there’s an almost seamless transition in the variation between one element and the next, making a smooth undulation in the form and, collectively, feeling like one continuous piece even though it is dozens, maybe a couple hundred, individual elements. This approach and her workmanship make you hyper-aware that basic forms are being repeated, if changing along the way.  If you’re unfamiliar with Liv’s work, jump over to this site for a quick peek at more of these stunning necklaces of hers.

 

Okay, one more piece that is not polymer but so readily could be and I think will be quite inspiring for those of you who like to work with sheets of thin polymer or, looking at the pattern only, cool geometric cane work. Paper does really lend itself to repetition as seen by this and the paper necklace of the opening image.

This is paper jewelry by Dutch artists Nel Linssen. Paper quite readily, and beautifully, lends itself to dynamic repetition. The energy here comes with the variation within each element that has been repeated. It doesn’t hurt that they’re basically arrow shapes all pointing inwards making it feel like all the movement is strongly and persistently moving towards the center. Yes, there is strength in repetition as well!

 

Meanwhile, back at the ranch (as they used to say) …

Okay, so, a little bit of an update on the situation over here at Tenth Muse Arts headquarters:

The not so great news is that the conclusion about my tendinitis progressed into something called tendinosis which takes a lot longer to heal and is why I am still dealing with it. On top of that, I have some possible physiological issues which may be the cause of my slow healing (on top of working too much, of course!) The good news is it is all fixable. However, I am going to have to disrupt my usual schedule to deal with this and, with the tendinosis, I am being told that I should stay off my keyboard as much as possible for the next 3-6 months. Ack! That means I can’t do layout, photo adjustments, or anything else that takes just a ton of mouse clicking and keyboard shortcuts. I can still write thanks to speech to text software but not much of anything else.

Translation… I have had to make the decision to halt production on The Polymer Studio magazine for the time being. I’ve also decided subscription purchases will not be available during this time because I just can’t take money for something that isn’t actively in process. That just feels wrong. And yes, I considered bringing on people to help but it would take a while to get anyone up to speed on graphics and editing work and if I’m going to work on myself, I can’t add to my schedule. My crazy long workdays are why I’m having the physiological issues, so I really have to take a pretty full break.

So, I’m making plans to play around with creating some other stuff that would be doable with written, spoken, or videotaped content because I am just not good at not being productive. But without deadlines, I can take my time. And, yes, I do plan to continue to post the blog. I like chatting with you all too much to stop if I don’t really have to!

So, some weeks I might have to go a little bit light, but I do plan to be here to join you on Sunday mornings for low contemplative art. Do please join me next Sunday – I’m putting together a survey to see what you all would like me to talk about on the blog and my other possible projects. I’m working on gathering goodies for a giveaway to go with the survey so don’t miss that!

Have a wonderful, creative, healthy, and inspiring week!

Read More

Questioning Focus

July 7, 2019
Posted in

“Fabiclay” brooch by Klio Tsaliki

Are you one of those people who finds an interesting path and goes down its until you find the end or do you like to wander about? I know that’s kind of a vague question, but you could apply it as a metaphor to goals in your life, the path of your career, or the way you create your artwork. I recently read some excerpts by Thomas Edison on the importance of keeping focused. He said, “The one prudence in life is concentration, the one evil is dissipation.” I don’t know if I wholly agree with that or, at least, I think it’s not so readily summed up in one tidy sentence.

I bet you can come up with at least a couple of artists off the top of your head who have come up with a treatment in polymer clay that they create with almost exclusively and have become quite masterful at it. But I think you come up with quite a few artists who consistently try different things, exploring, growing, and changing their style and focus on the artwork. Would you say that the person who focuses is probably doing better work than the person who is constantly exploring?

Perhaps it’s because we are talking about art that I can so readily dismiss Edison’s comment. I have always thought that, for most artists, art is about the exploration. I think if you find one technique and worked very hard to perfect it, you might get overly comfortable because you will more likely succeed with each successive piece as you hone your skill. And yes, I am presenting that as a possible problem. I am a strong believer in the value of messing up and creating pieces that “fail” on some level. It’s those experiences that really teach us and allow us to grow as artists. However, I do think that masterful artists who stick with one approach do, especially in their mind, make a lot of mistakes and have numerous pieces that failed or fell short of the artist’s expectations for every piece of work we would deem a masterpiece.

The bottom line is, I think whatever journey your imagination and curiosity leads you on is the right path to follow with your creative work. Don’t fight it if you like to stick with one technique and refine it over and over or if you get easily bored once you feel you’ve mastered something enough to understand it and want to move on to the next challenge. The journey of our creative process is as individual and unique as our own artwork.

Let’s look at a few examples of people on both sides of this coin – those dedicated to a primary technique and those that constantly change their focus. Then you can decide for yourself if Edison had a point or not.

Single Minded Tangents

There are so many artists that come to mind that focus on a single technique or process and have mastered it to a mind-blowing extent. Elise Winters is one of the first that comes to mind when it comes to technique. This surface treatment was her signature and her legacy and no one, that I’ve seen, has yet matched her skill with it.

 

When it comes to form, I don’t think anyone else in the polymer community has made more of the same form than Ron Lehocky with his hearts. But here’s an example of staying focused on one thing while exploring just about everything else you can. He’s made tens of thousands of hearts and no two are the same. Here are examples of the variations he came up with from a single Skinner blend.

 

One of the most masterful and single-minded people of process would have to be Jon Stuart Anderson with his cane covered animals and functional objects. Although caning is his focus as far as technique, he is constantly exploring pattern and how it affects the form. It’s a subtle exploration but if you look back through his work you’ll see how the application of pattern has changed over the years and how he is constantly exploring new forms to apply them to, working on how the new forms will show off the canes or how the canes will accentuate the forms.

I love this bowl below. It shows more “quiet space” with those swaths of black to red canes, than I think I’ve ever seen in his work before. The relatively unpatterned area so dramatically contrasts the complex canes designs but you can take in the individual cane and pattern placement more readily because the eye has a place to rest, giving you a moment to rest and to process more of what you’re seeing

 

This whole subject matter recalls to me a conversation Rosanna Faillace and I had with Melanie Muir in Rome last year. We were talking about people who stick with one technique and don’t branch out and Melanie, seeming to think it might be a negative thing, said “That’s me. I’m a one trick pony.” But of course, she’s not. She loves her inlaid mokume gane veneers, but she is constantly exploring construction and different forms on which to present these, resulting in pieces like this beautiful bracelet.

Frenetically Fabulous

I myself am of the exploratory variety of artists. I do wish I had a little more focus and could spend more time on any single technique, form, or process, but the thing is, my curiosity about what else I could do is a stronger driving force, so I go with that. There are a LOT of us artistic explorers in polymer art as polymer just cries out to be explored.

When it comes to an exploratory approach in polymer, Debbie Crothers is the first person who comes to mind. You can see her gorgeous acrylic on polymer beads on the front of the upcoming issue of The Polymer Studio. Her penchant for exploration is why she is writing the “Mix it Up” articles in the magazine. She always has something she’s playing around with and she does love to share. She does occasionally show the results of both her good and not so successful explorations, which I love because it demonstrates her willingness to try, to make mistakes, and to do the work over and over again until she has mastered it. It is highly unlikely that Debbie would have gotten the results she got in these beads below if she didn’t go through a lot of trial and error first. The final results are well worth the exploration!

 

Another person I’ve been following for years is Klio Tsaliki. She’ll try almost anything and, in the process, comes up with some great techniques and approaches. Some attempts come out better than others, but I love that she shares it all, or at least enough for us to see that she is not afraid to try anything that interests her. I find that very inspiring. A couple of years ago she was playing with metallic silkscreen and the possible fabric-like quality of polymer, as you can see in the opening photo of this post. More recently, she’s played with translucent clay and LED lights, as seen below.

Klio’s newest work has been in the up and coming new clay from Fimo, “Leather Effect”. Once cured, this clay is supposed to be very much like leather. You can see here on the Fimo website that it is very pliable and can be cut and even stitched. I don’t know about you, but I have never been so excited about a new line of polymer clay! It’s not available in the US yet, and I don’t know how widely distributed it is in Europe, but there is supposed to be news about that soon and, trust me, when it is available, I’m going to be playing with it quite a bit as leather was one of my first materials I made jewelry from. You can go to Klio’s Flickr photostream to see what she’s been doing with it.

Another name for exploration is pioneering. Pioneers need to explore their subject extensively to find those new and intriguing aspects that lead the rest of us to their fresh finds. In general, you’ll find that most of the folks we identify as polymer pioneers were and are highly exploratory. Just look at what Kathleen Dustin has done throughout her career. From ornate purses to translucent layered brooches to reinterpretations of textile patterns such as with these new brooches below, you never really know what Kathleen will be working on next and yet, all her work is masterfully constructed and impeccably finished. I think her exploration keeps her work fresh for us and, most especially, for her and her passion for her work.

 

Focus on Yourself

So, as you see, there are many approaches to the creative process, all of which have value and result in beautiful, emotive, and inspiring work. So, no, I don’t think focus and concentration on one technique, form, or even material, is necessary but I do think keeping a sharp focus on the overriding creative goal – to make fulfilling artwork, financially supportive artwork, satiating your curiosity, or whatever the important creative motivation is for you – is something to keep a watchful eye on.

Speaking of focus … The construction on my house is in the finishing stages now. That hasn’t helped me with my focus on getting the next issue out, neither has my tendinitis and back issue which was such a huge problem last year. The thing is, in the last year, I have not really had enough time off to completely heal and am having issues again. I’m pretty sure I can get this issue to the printer in time to have it out by the end of the month but I’m probably going to have a heart-to-heart with my doctor on what I really need to do to get this healed and am working out a bit of time off later this month. This is one area where keeping focus would be very helpful!

I will keep you apprised of any shakeups in production if you are a subscriber to The Polymer Studio so just stay tuned here. And next week maybe I can get you pictures of the house for those of you who are curious. Everything’s under plastic wrap right now as they finish plastering and painting. But it’s horribly exciting seeing it come together!

So, I will leave you with these thoughts on focus and exploration. I hope it brings you some interesting insights for your own process and work. Have a fabulous week!

 

Read More

Flower Powered Polymer

May 5, 2019
Posted in

Kathy McCurry, Bearded Sadie

Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers

So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.

Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.

Flower Power

first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.

What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.

It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.

 

Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.

Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.

 

Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.

 

Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.

 

But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.

 

Moving on From Flowers

To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!

The Polymer Studio, Issue #2 … click the image to see a sampler edition

Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.

 Looking for your already purchased copy?

If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.

Print editions of the new issue went to the post office Wednesday  directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.

 

 

I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!

 

Read More

Splitting the Difference

April 21, 2019
Posted in

Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night  … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)

So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.

I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!

So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?

 

Splitting the Canvas

Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.

For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.

 

Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)

Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.

This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.

 

And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.

 

Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.

 

You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.

 

 

Splitting up is Not Hard to Do

If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!

Here is a simple series of steps you can try right now … A Cane Split Canvas:

  1. Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
  2. Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
  3. Burnish the canes into the clay sheet so the surface is smooth.
  4. Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
  5. Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
  6. Once you find the section you like, cover it with plastic wrap and cut with your cutter.
  7. Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.

Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.

You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.

Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!

 

Now for the Great Tile Adventure

Story time! For those entertained by the little dramas of my little life.

So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!

Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.

So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!

Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!

I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!

So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.

Read More

The Contrast Conundrum

March 31, 2019
Posted in ,

What would you say is the area of your craft that you most need to work on? Is it a skill that you want to acquire or improve? Is it simply getting yourself to do more work more often? (I know that’s one of mine!) Or is it some particular approach to the work that regularly seems to baffle you?

For me, I have always struggled with contrast. It’s not that I don’t like contrast, I just tend to like it done subtly. But if I am too subtle, the work lacks energy. On the other hand, if I consciously push it too far, it doesn’t feel like a genuine expression of mine. So, the idea of contrast is often on my mind when I am working.

First, let me correct a misconception that some people have. You do not have to have a high contrast in your work to create a good design. There can be little to no contrast in a piece and it can still have a beautiful design. Contrast is about the degree to which elements such as color, texture, pattern, shape, size, etc. are dissimilar or alike. Like anything else in design, good use of contrast comes down to making an intentional decision about how you will use it in your work.

For instance, high contrast tends to be high-energy and bold while moderate contrast comes across often as refined or restrained, and little to no contrast tends to be quiet and reserved. These descriptors are not always true because the level of contrast plays differently depending on what design element is being contrasted and how it works with (or against) other characteristics in the work.

Okay, enough jabbering on about these abstract concepts. Let’s look at some examples and get those little gears in your head turning as you ponder how you use contrast now, or how you would like to be using it.

Compare and Contrast

One of the most common ways to develop high contrast, especially in polymer, is with color. From canes to mokume to silkscreened veneers, high color contrast is the only way to have the effect of some techniques even show. But at the same time, minimal color contrast with little value change can result in lovely but subtle marbling, it helps support the dreamy feel of blended alcohol ink techniques, or allows us to showcase texture or form while color is relegated to a supporting role.

One of the most foolproof ways to use color for contrast is to go black and white. But if you go that extreme, you will probably need to heavily play up other design elements such as form, pattern, line, or texture. Or, you can put other colors into play.

That’s basically what Lynn Yuhr did with this earring and pendant set. The primary high contrast is a black border surrounding a white background. That’s simple enough, but then she throws a variety of colors in there, both warm and cool ones from across most of the color wheel. Then she goes for contrasting shapes by including both the softness of circles and the sharp angularity of triangles. Not only that, (this is really a piece all about high contrast!) she includes both solid shapes and thin lines. Some shapes are floating and unattached while others are overlapping, and some lines are solid while others are dashed. Often, this much variation can become chaotic and ungrounded but everything here has clean, defined and very graphic edges and she only chooses 2-3 variations of each design element. But the most grounding aspects are the black frame holding it all in and the swath of white being the common “floor” that this is all scattered on. It is energetic and yet contained, fun but still sophisticated. You can see, in the opening image, that she uses a similar approach but goes for full washes of color as the background, for slightly less dramatic contrast.

 

Have you ever been told to not wear plaid with polka dots at the same time? Well, you can if you play it right, pushing the contrast by adding even more pattern to your outfit so that is an obvious intentional choice. You’ll often find this approach in the work of Louise Fisher Cozzi. This necklace below has many different patterns. Some are very regular, while others are more organic. Most are rather busy but then there are those strings of solid pieces with nearly no pattern but for a slightly uneven glaze of color. Regardless of all these contrasting patterns, they have a connecting commonality in their circle form as well as being in a limited range of color saturation (pureness of color), giving what would otherwise be a cacophony of visual texture, a necessary cohesiveness. The result is a sophisticated kind of fun, sure to draw a bold, gregarious, and fun-loving buyer to this work.

 

Tactile texture can also be used as a contrasting mechanism in your design. An easy way to achieve contrast with texture is to have a smooth surface and a rough surface. It could be as simple as part of the work being highly polished and part of it sporting a matte finish. You can create textural contrast without going for the smooth versus rough by having two types of rough surfaces. That still contrasts if a bit more subtle.

The gorgeous Jenny Reeves earrings below, a metal, rather than polymer example (although there are plenty of folks who do similar texturing in polymer) has plenty of contrast although it does not jump out at you. The matte silver on the sides of each circle contrasts with the rough reticulated metal but not jarringly so. The matte finished silver moves to rough silver moves to rough gold so that there is only one level of change between each of those three treated sections of the circles. This somewhat gradual change diminishes the impact of the contrast resulting in a softer feel. Imagine how this would have looked if it went from matte silver to rough gold without the transitional section? It would have a very different feel.

As I mentioned, going for low contrast has its place and advantages. Dorota Kaszczyszyn doesn’t generally go for high contrast, but that is probably because she focuses primarily on her imagery and creating the forms and textures to bring her fantastical adornment to life, as is evident in her Water Dragon necklace here.

It’s not that contrast doesn’t exist in this piece – there is certainly contrast in texture, especially on the wings, going from a dimpled cap to a feathery brush below. However, all the surfaces have some kind of hand tooled texture, minimizing the contrast in that regard. The colors also have a minimal contrast, going from silver to a similarly shimmery brush of color using an interference green/purple powder, a color scheme echoed even in the focal shell on the dragon’s back. This low contrast gives the necklace, and her creature, a quiet grandeur, but it is not bereft of energy, instilled with a light but rippling liveliness through the texture and the flow of the shapes.

 

A Contrasting Evaluation

If, after seeing the ways you can work with contrast, you feel inclined to play with the way you use this design element, you can do so with some simple exercises.

Color is pretty easy to start with. Starting with a color combination you commonly use or tend towards, replace each color with the same hue but choose colors that are much darker, brighter, lighter, or subdued than the other colors. You will want the colors to have at least one characteristic in common (like they could all be very saturated or all be very light or they could all have a bit of black added to them) to keep the combination cohesive. You could also simply take out a bunch of blocks of clay and create several color pallets by shuffling them around – one high contrast, one meeting contrast in one low contrast. See which one you like the best.

If you want to better understand your options in color, grab Maggie Maggio and Lindly Haunani’s Color Inspiration book, or for a more condensed overview, grab your copy or get the Summer 2017 issue of The Polymer Arts which is all about Color! (We still have that 33% off 3 or more magazines sale going on and you don’t need a promo code for it now.)

You also can do a self-evaluation by grabbing a few of your favorite pieces, as well as a few pieces that weren’t successful, and looking at the difference in contrasts in the following areas:

  • Color
  • Texture
  • Shape/form
  • Size of forms or motifs
  • Pattern

See if you can identify where contrast worked well in the successful pieces and maybe where it could have been improved in the less successful ones by simply imagining increasing or decreasing contrast in each of the design elements listed above.

If you’re one of those who likes to make lists, copy these five design items out onto a piece of paper (or into an Excel sheet if you like those) and for each piece you have, identify whether the contrast is low, medium, or high for each design element. Then if you look at your evaluation list, you may find that you always have low contrasting color or high contrast in pattern, or vice versa or that, in general, you don’t work in high contrast or you never try low contrast. Whatever you’re not seeing a lot of, try to consciously create designs that push you out of your comfort zone.

Now, as I mentioned at the beginning, I don’t like to push high contrast in my work so it may seem funny for me to ask you to do something that goes against your norm, but I was only able to determine my preference because I did exercises like this. Push yourself like this can really help you discover a lot about yourself as an artist.

But if you’re more of the low-key, intuitive type, just keep contrast in mind next time you’re at the studio table. Like any design consideration, your work can be improved simply by being aware of whether you are making conscious decisions about design. If you are now more aware of contrast, you may find you’re able to more easily identify why a piece may not be working by checking the contrast and asking yourself whether low or high contrast or something in the middle would best serve what you’re trying to express or the type piece you are trying to create.

From Behind the Scenes

On that note, I am going to go work on the contrast that exists in my life between having a normal living situation and figuring out how to work and live in the beginnings of a halfway gutted house. But I always like a challenge!

I almost have my makeshift outdoor kitchen ready! Grill cleaned and ready for action. Check. Camp stove hooked up to grill size propane tank. Check. Camp table/sink with an actual running faucet via my garden hose set up. Check. Yep … no crazy construction is going to keep me from my creative cooking!

Now I just need to make covers/cozies for my instant pot and my non-polymer countertop oven so they can sit outside more or less protected from the elements. Then … I need to clear space in the studio for the refrigerator. I have always said that one’s studio or office should be as far away from the refrigerator as possible to discourage unintentional grazing so I’m seriously breaking my own rules here! Didn’t I just say I like a challenge? Maybe I should have clarified how much of a challenge I like. *sigh*

I’ll be juggling all this while I am in the midst of polishing up the next issue of The Polymer Studio but have thus far been able to stay more or less on schedule. Just don’t miss out on this next issue!

Issue number two of The Polymer Studio has a wonderful collection of projects for you as well as a tour of Christine Dumont’s studio (so exciting!), an interview with the uniquely creative Cynthia Tinapple, stencil explorations with Debbie Crothers and much more! We would love for you to join us in The Polymer Studio… Just subscribe to get your plethora of polymer fun and inspiration. Your subscription also supports this blog and all the polymer obsessed artists that have helped to create the beautiful content of our publications.

Thank you for your continued support! Enjoy the rest of your Sunday and have a creative and inspiring week!

 

 

 

Read More

Mixing and Mingling, New Cover, & 33% off Back issues

March 24, 2019
Posted in , ,

We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.

We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.

All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.

(Be sure to scroll down to the last section for the 33% off sale stuff.)

A Fine Mix-up

So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.

One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.

Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!

So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.

Mixed Directions

Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.

This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.

 

Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.

 

With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.

The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.

 

Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.

 

Putting Together Your Own Mixer

This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.

You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.

In fact, let’s have a sale!

Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.

And … I’m Off!

I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up.  But talk about mixing it up!

So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!

Read More

Hole-y Design

March 10, 2019
Posted in , ,

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Read More
If you love these posts ...

Click a tag …

art blog artist artistic influence artistic inspiration artist inspiration art magazine beads bracelet caning clay clay blog clay magazine color composition craft blog craft magazine creativity design earrings inspiration inspirational challenge of the day jewelry mixed media movement natural nature necklace organic pendant polymer polymer art polymer arts polymer blog polymer clay polymer jewelry polymer magazine sculpture technique texture The Daily Polymer Arts Blog the polymer arts The Polymer Arts blog The Polymer Arts magazine tutorial tutorials

Archives