A Magnetic Connection
June 12, 2015
Inspirational Art, Technique tutorials
One of the tougher decisions I had to make when putting together the Summer 2015 issue was to cut part of what Helen Breil sent for her wonderful “Magnetic Design” technique tutorial. The article primarily focuses on the creation of pieces with interchangeable magnetic focal points using rare earth magnets, but she also generously added a few additional instructions, including how to create magnetic brooch clasps that work double-duty as a pendant bail, as well as being the basis for multi-pin pieces that can be set on clothing in different configurations. She had also included an easy option for creating a magnetic front closure, but she had sent so much great information that we simply couldn’t fit it all in. So here is a concise collage of the magnetic front clasp she created for us, and the photos that let you see how it is put together.
The quick run down is that you use cylindrical rare earth magnets, drill holes on each half of the clasp, ensuring the magnet positions will line up your two halves exactly where you want them to come together. Create holes just large enough to snugly fit the magnets and deep enough for them to sit flush with the edge of the clasp. (You can insert the magnet into the hole to see if fits and use another magnet to pull it out of the hole when it does go in flush as needed.) Apply cyanoacrylate gel glue to the magnets and place them back into the hole. Ensure the magnets are set in the ‘right’ direction–since magnets are directional, you don’t want them glued in leaving only ends that oppose each other, so snap the magnets together as they should be and apply the cyanoacrylate gel glue to one end, pressing it into its hole, and then grasp that side of the pendant, add glue to the still exposed magnet end and push it into the open hole. Release the magnets by sliding them apart and let the glue set. That’s it!
Helen is a wealth of information and fabulous ideas, not to mention a creator of many wonderful clay-centric products. Be sure to check out her website for her tutorials, books, silkscreens, and texture sheets, as well as take a peek or two at her Flickr photostream for more great ideas. And get your copy of the summer issue of The Polymer Arts for Helen’s entire brilliant article.
If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.
Barely Met
July 22, 2014
Inspirational Art
Let’s look at the simple idea that necklaces don’t have to be a complete, fully attached, encircling item nor does the closure for it have to be at the back of the neck. If the point at which the necklace opens can be integrated into the design, it can be placed anywhere on the piece. And if you have a firm, but pliable structure, it doesn’t even have to connect.
Olimpia Corvino used this approach with a number of her designs. This necklace breaks the usual standards of using wire as structure. This breakaway from the norm allows for a front entrance and two large pieces of polymer to just barely meet in the middle. That “barely there” touch is fantastic as it causes tension and a point of focus. I really enjoy that she has used wire work to break the swathes of polymer at a point that would have normally been the center had the necklace used a standard wire structure in order to join it. It’s another subtler point of tension, but these near connections do a lot to enliven the design.
For now, Olimpia’s designs seem to exist only on Facebook, but as it is a business page, you can actually access it whether or not you have a Facebook account. Take a look at her wide range of pieces, which are sometimes nontraditional, sometimes standard, but always bold in color, texture or approach.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
One of the tougher decisions I had to make when putting together the Summer 2015 issue was to cut part of what Helen Breil sent for her wonderful “Magnetic Design” technique tutorial. The article primarily focuses on the creation of pieces with interchangeable magnetic focal points using rare earth magnets, but she also generously added a few additional instructions, including how to create magnetic brooch clasps that work double-duty as a pendant bail, as well as being the basis for multi-pin pieces that can be set on clothing in different configurations. She had also included an easy option for creating a magnetic front closure, but she had sent so much great information that we simply couldn’t fit it all in. So here is a concise collage of the magnetic front clasp she created for us, and the photos that let you see how it is put together.
The quick run down is that you use cylindrical rare earth magnets, drill holes on each half of the clasp, ensuring the magnet positions will line up your two halves exactly where you want them to come together. Create holes just large enough to snugly fit the magnets and deep enough for them to sit flush with the edge of the clasp. (You can insert the magnet into the hole to see if fits and use another magnet to pull it out of the hole when it does go in flush as needed.) Apply cyanoacrylate gel glue to the magnets and place them back into the hole. Ensure the magnets are set in the ‘right’ direction–since magnets are directional, you don’t want them glued in leaving only ends that oppose each other, so snap the magnets together as they should be and apply the cyanoacrylate gel glue to one end, pressing it into its hole, and then grasp that side of the pendant, add glue to the still exposed magnet end and push it into the open hole. Release the magnets by sliding them apart and let the glue set. That’s it!
Helen is a wealth of information and fabulous ideas, not to mention a creator of many wonderful clay-centric products. Be sure to check out her website for her tutorials, books, silkscreens, and texture sheets, as well as take a peek or two at her Flickr photostream for more great ideas. And get your copy of the summer issue of The Polymer Arts for Helen’s entire brilliant article.
If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.
Let’s look at the simple idea that necklaces don’t have to be a complete, fully attached, encircling item nor does the closure for it have to be at the back of the neck. If the point at which the necklace opens can be integrated into the design, it can be placed anywhere on the piece. And if you have a firm, but pliable structure, it doesn’t even have to connect.
Olimpia Corvino used this approach with a number of her designs. This necklace breaks the usual standards of using wire as structure. This breakaway from the norm allows for a front entrance and two large pieces of polymer to just barely meet in the middle. That “barely there” touch is fantastic as it causes tension and a point of focus. I really enjoy that she has used wire work to break the swathes of polymer at a point that would have normally been the center had the necklace used a standard wire structure in order to join it. It’s another subtler point of tension, but these near connections do a lot to enliven the design.
For now, Olimpia’s designs seem to exist only on Facebook, but as it is a business page, you can actually access it whether or not you have a Facebook account. Take a look at her wide range of pieces, which are sometimes nontraditional, sometimes standard, but always bold in color, texture or approach.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
