A Little Faux Lampwork
May 15, 2013
Inspirational Art
Wow … thank you all for chiming in with your comments and emails on what to do with the rest of the week. It’s really very cool to hear from you all. Perhaps we’ll pose options (and giveaways!) for upcoming weeks on a regular basis. You can tell me what is of the most interest … I get very energized writing because of your feedback rather than the ideas that pop into my head, out of the ether. And who doesn’t like a chance to get free stuff! Sounds like a win-win to me!
So, faux came in heavy right off but a call to see more about variation started coming up from behind as the evening went on. The end result is … we are going to start with faux this week then look at how to work out variations next week.
Since Iris and Hilla brought to our attention another art form emulated in polymer, why don’t we stick with other craft arts that we can create in polymer? Try to keep in mind as we look at these techniques that the objective is not to find other arts to emualte but to see new directions that polymer can be pushed in your studio. For instance, I thought we’d start with an artist who’s faux lampwork has fascinated me since I stumbled on it a few years back. I love experimenting with liquid polymer and I was fascinated by how high Sharon Solly makes her glass like dots and how well controlled they are.
Sharon may have an bit of an advantage over the rest of us as she actually does lampwork. I am really curious as to how similar the work is. I know I experimented for a while trying to get the dot not to spread. My solution was to either add just a smidge at a time, hitting it with a heat gun between dabs or preheating the base clay so the dot of liquid polymer would start to solidify immediately. The pre-heat worked well on flat items as I could lay the base clay on a hot plate/mug warmer and work on that but the round beads … I just couldn’t get the same effect that Sharon is getting. But if you can work on building up liquid polymer like this, you could add a bit of the faux lampwork look to many things you couldn’t add glass to in the first place. There are tremendous possibilities for decorative dotting!
If you are in the least bit interested, do look through Sharon’s Flicker pages. This one image is a bare tip of the iceberg … she has a broad body of work showing her on-going experimentation with this process. Actually, Sharon looks to be a major faux experimentator with a large variety of stones and dichroic-like pieces done in polymer.
So go explore some faux! Tomorrow we’ll announce the winner of the Cosmic Ceramic giveway as well. See you then!
Let The Light Shine Through
April 25, 2013
Inspirational Art
Although many of us may be mesmerized by the jewelry possibilities of translucent clays, we should not forget just how wonderful they can be on decor, especially pieces for which light is integral such as lamps, candle holders and night lights.
Below we have a beautifully detailed example of just what translucents offer when covering lighted decor. This is a lamp by Diane Dunville … created in 1998. (Yeah … we didn’t need no Pardo back then!)
The thing about lighted decor is that it needs to be designed for two different types of existence–lit and unlit. Obviously it’s gorgeous when lit from within but since it won’t always be on (one would think) it should be a beautiful object when unlit as well. Which is done here. Diane’s bold colors and a considerable consideration for the layout of the patterning should make this nearly as impressive a piece of decor in its unlit state as it is when illuminated from inside.
This is not just a covered object either. Here is the description of Diane’s work from the Polymer Art Archive post (written by Rachel Carren) in which I found this lovely piece:
“Fascinated by glass art, Dunville created a series of lamps during the late 1990’s. After building a foundation of mesh, Dunville added layers of translucent polymer which were then textured and carved. The results are a graphic and playful blend of color and pattern which make for bold, decorative surfaces when unlit and cast a colorful glow when lit.”
Agreed!
Wow … thank you all for chiming in with your comments and emails on what to do with the rest of the week. It’s really very cool to hear from you all. Perhaps we’ll pose options (and giveaways!) for upcoming weeks on a regular basis. You can tell me what is of the most interest … I get very energized writing because of your feedback rather than the ideas that pop into my head, out of the ether. And who doesn’t like a chance to get free stuff! Sounds like a win-win to me!
So, faux came in heavy right off but a call to see more about variation started coming up from behind as the evening went on. The end result is … we are going to start with faux this week then look at how to work out variations next week.
Since Iris and Hilla brought to our attention another art form emulated in polymer, why don’t we stick with other craft arts that we can create in polymer? Try to keep in mind as we look at these techniques that the objective is not to find other arts to emualte but to see new directions that polymer can be pushed in your studio. For instance, I thought we’d start with an artist who’s faux lampwork has fascinated me since I stumbled on it a few years back. I love experimenting with liquid polymer and I was fascinated by how high Sharon Solly makes her glass like dots and how well controlled they are.
Sharon may have an bit of an advantage over the rest of us as she actually does lampwork. I am really curious as to how similar the work is. I know I experimented for a while trying to get the dot not to spread. My solution was to either add just a smidge at a time, hitting it with a heat gun between dabs or preheating the base clay so the dot of liquid polymer would start to solidify immediately. The pre-heat worked well on flat items as I could lay the base clay on a hot plate/mug warmer and work on that but the round beads … I just couldn’t get the same effect that Sharon is getting. But if you can work on building up liquid polymer like this, you could add a bit of the faux lampwork look to many things you couldn’t add glass to in the first place. There are tremendous possibilities for decorative dotting!
If you are in the least bit interested, do look through Sharon’s Flicker pages. This one image is a bare tip of the iceberg … she has a broad body of work showing her on-going experimentation with this process. Actually, Sharon looks to be a major faux experimentator with a large variety of stones and dichroic-like pieces done in polymer.
So go explore some faux! Tomorrow we’ll announce the winner of the Cosmic Ceramic giveway as well. See you then!
Read MoreAlthough many of us may be mesmerized by the jewelry possibilities of translucent clays, we should not forget just how wonderful they can be on decor, especially pieces for which light is integral such as lamps, candle holders and night lights.
Below we have a beautifully detailed example of just what translucents offer when covering lighted decor. This is a lamp by Diane Dunville … created in 1998. (Yeah … we didn’t need no Pardo back then!)
The thing about lighted decor is that it needs to be designed for two different types of existence–lit and unlit. Obviously it’s gorgeous when lit from within but since it won’t always be on (one would think) it should be a beautiful object when unlit as well. Which is done here. Diane’s bold colors and a considerable consideration for the layout of the patterning should make this nearly as impressive a piece of decor in its unlit state as it is when illuminated from inside.
This is not just a covered object either. Here is the description of Diane’s work from the Polymer Art Archive post (written by Rachel Carren) in which I found this lovely piece:
“Fascinated by glass art, Dunville created a series of lamps during the late 1990’s. After building a foundation of mesh, Dunville added layers of translucent polymer which were then textured and carved. The results are a graphic and playful blend of color and pattern which make for bold, decorative surfaces when unlit and cast a colorful glow when lit.”
Agreed!
Read More
