Out of the Fire

January 7, 2015

3.3We’re going to head to the orange and yellow side of the warm spectrum today, with a beautiful sculpture by Canadian artist Ellen Jewett. The warmth in this piece feels more like the warmth of sunlight with the white and yellows and coppery oranges. We see that sense of glow here as well, from the gradation of the colors, although most of the color change seems to be between the laid out elements and not in the clay. Mica clays also help to radiate a sense of bright light. This is to show that the visual illusion doesn’t come just from the soft change in color, as in a Skinner blend, but in the way we visualize the play of light. Light changes quality as it hits different surfaces, which, in this case, are the feathers of this dragon-like phoenix. The variety of the surface gives it a liveliness not unlike a dancing fire.

Ellen creates all kinds of very fantastical creatures with very dynamic forms and proportions. I suspect either her educational pursuits in biological anthropology and anthrozoology contribute to these amazing pieces or the same artistic drive to create pushed her to pursue her unusual combination of studies. It is quite worth taking a break to spend some time in her Etsy shop and her website.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.

businesscard-3.5inx2in-h-front    PolymerArts Kaleidoscope     lpedit

Controlled Ripples

September 24, 2014

connybrocksteadt ripple pinWe’ve looked at a few rather free-form versions of rippling, but ripples can also be well controlled and stylized while maintaining that similarly energized feel of movement.

The pins that emerged in The Broken Internet Project had a lot of controlled, but high-energy lines in the designs, most likely due to their inspiration being a pin by the meticulous Dan Cormier, a pin that had a zigzag line (a cousin to the ripple, you could say) through the center of it. I loved Cornelia Brockstedt’s interpretation with both a controlled rippling Skinner blend and a silhouette of a ripple inserted next to it. Calm, but energized. It’s almost the definition of that.

If you never had the chance to see the whole Broken Internet Project results, be sure to jump over to The Cutting Edge’s Facebook page to see them all together. And, for more by the fabulous Cornelia Brockstedt, take a look at her website or her Flickr pages for her latest pieces.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Monochromatic Intricacy

May 21, 2014

Today, let’s dial it down to something more attainable for us mere mortals. We don’t all have quite the level of patience to accomplish what we saw the last couple days but perhaps we could approach that with techniques where intricate work can be accomplished on a smaller scale.

If you’ve been following this blog for long, then you have probably noticed my admiration for filigree style work. Even when monochromatic, the lines and textures of dense polymer filigree can be so mesmerizing. Luana Sgammeglia uses this coiled filigree technique to decorate necklaces, bracelets, earrings, and even handbags. Even though this technique looks intricate, it can be made relatively quickly once you get into the rhythm of it. You just need to be patient and steady. Doing this kind of work can be quite zen like actually!

12361207253_1798b7daa4_o

Have you ever tried incorporating coils into the surface design of your clay? You can either roll the ropes by hand or use a handy-dandy extruder. If you have never worked with coil filigree, there are some good video tutorials on YouTube and a number of free image tutorials floating around the web as well. You can enjoy more of Luana’s work on her Flickr photostream or on her Pinterest site.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   polymer clay overlapping cane   14P1 cover Fnl

Out of the Fire

January 7, 2015
Posted in

3.3We’re going to head to the orange and yellow side of the warm spectrum today, with a beautiful sculpture by Canadian artist Ellen Jewett. The warmth in this piece feels more like the warmth of sunlight with the white and yellows and coppery oranges. We see that sense of glow here as well, from the gradation of the colors, although most of the color change seems to be between the laid out elements and not in the clay. Mica clays also help to radiate a sense of bright light. This is to show that the visual illusion doesn’t come just from the soft change in color, as in a Skinner blend, but in the way we visualize the play of light. Light changes quality as it hits different surfaces, which, in this case, are the feathers of this dragon-like phoenix. The variety of the surface gives it a liveliness not unlike a dancing fire.

Ellen creates all kinds of very fantastical creatures with very dynamic forms and proportions. I suspect either her educational pursuits in biological anthropology and anthrozoology contribute to these amazing pieces or the same artistic drive to create pushed her to pursue her unusual combination of studies. It is quite worth taking a break to spend some time in her Etsy shop and her website.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine as well as supporting our advertising partners.

businesscard-3.5inx2in-h-front    PolymerArts Kaleidoscope     lpedit

Read More

Controlled Ripples

September 24, 2014
Posted in

connybrocksteadt ripple pinWe’ve looked at a few rather free-form versions of rippling, but ripples can also be well controlled and stylized while maintaining that similarly energized feel of movement.

The pins that emerged in The Broken Internet Project had a lot of controlled, but high-energy lines in the designs, most likely due to their inspiration being a pin by the meticulous Dan Cormier, a pin that had a zigzag line (a cousin to the ripple, you could say) through the center of it. I loved Cornelia Brockstedt’s interpretation with both a controlled rippling Skinner blend and a silhouette of a ripple inserted next to it. Calm, but energized. It’s almost the definition of that.

If you never had the chance to see the whole Broken Internet Project results, be sure to jump over to The Cutting Edge’s Facebook page to see them all together. And, for more by the fabulous Cornelia Brockstedt, take a look at her website or her Flickr pages for her latest pieces.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Read More

Monochromatic Intricacy

May 21, 2014
Posted in

Today, let’s dial it down to something more attainable for us mere mortals. We don’t all have quite the level of patience to accomplish what we saw the last couple days but perhaps we could approach that with techniques where intricate work can be accomplished on a smaller scale.

If you’ve been following this blog for long, then you have probably noticed my admiration for filigree style work. Even when monochromatic, the lines and textures of dense polymer filigree can be so mesmerizing. Luana Sgammeglia uses this coiled filigree technique to decorate necklaces, bracelets, earrings, and even handbags. Even though this technique looks intricate, it can be made relatively quickly once you get into the rhythm of it. You just need to be patient and steady. Doing this kind of work can be quite zen like actually!

12361207253_1798b7daa4_o

Have you ever tried incorporating coils into the surface design of your clay? You can either roll the ropes by hand or use a handy-dandy extruder. If you have never worked with coil filigree, there are some good video tutorials on YouTube and a number of free image tutorials floating around the web as well. You can enjoy more of Luana’s work on her Flickr photostream or on her Pinterest site.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   polymer clay overlapping cane   14P1 cover Fnl

Read More
If you love these posts ...