Combining Filigree, Embroidery and Applique

June 19, 2015

U55a0Zvy6Ko

Take a close look at this jewelry set. How many variations of impressing, winding, twisting, layering and embedding little bits of clay do you see here? I’ve gotten a different count each time; I’m giving up on trying to give it a number and have spent my time admiring and determining the variation. And the patience. The lining up of these little bits to create lines or to create dense areas of texture is very precise. The variety enlivens the limited palette, which would otherwise be relying primarily on the contrast of lights and darks for impact.

This particular image was found on Pinterest attached to a number of boards all leading to the same image link, which will not lead me to any websites where I can find more information about the artist. That is a little maddening because the name is listed right there. It even looks familiar, but I can’t search farther for the simple reason that I can’t type in those letters. So, I’m sitting at a dead-end without any more information for you. I’m hoping one of you wonderful readers can read the text and then can send me a link. I believe this was pulled off vk.com (for the English only folks on here … it’s like Facebook for Eastern Europe and happens to be the #1 most visited site in that part of the world, as well as falling into the top 50 most visited sites worldwide), so I’m hoping someone can find it for us. You know how I don’t like to avoid bringing you art simply because I can’t find its origin, and I do like correcting that.

And as a little reminder in that vein … always add the artist’s name or website to your pins, even if you are just pinning it for yourself. Anything that is pinned on a non-private board (the default for Pinning) can and usually is picked up by others, but when it’s picked up off a home page that changes (like blogs) or a page that is temporary or the link gets broken or removed, the artist is no longer linked. If you like it enough to pin it, do what you can to ensure people who pull your pins can find the person who kindly shared their work with us and inspired us in the first place.

*Update* Many thanks go out to our reader Janna who found our the website of our artist, Olesyah Kalenova: http://vk.com/olesyakalenovahandmade.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

More Fun with Extruders

September 13, 2014

So after a week of extruder contemplation, have you gone into the studio to try out some new ideas yourself? Well, if not, but you’re anxious to try something out, here are a few ideas for you.

lilu-12287_320

 

A shaped cane with no background fill? Is that possible? According to Lilu of Russia, you can do this with an extruder. How is that possible? Even our brave artist here can’t say how this works, but can show us successful results. The caveat is that you lose about half your clay to scraps as the ends come out mangled. But, with so many scrap cane techniques to put those towards, that might not be the worse thing to happen.

42d9d8c2a73114b8a7a1d0d4cec3f154

 

 

For those of you who want something more straightforward and less experimental, try these extruded snake surface designs with graduated colors created by Lucy Struncova. No real mysteries here … just extrude small snakes in graduated colors (if you’ve not done that before, go here for the classic tutorial on creating rainbow snakes with an extruder), lay them side by side, use the edge of a credit card, or long thin needle tool to impress the lines perpendicular to the snakes and cut out shapes as desired. A quick easy way to get a surface design with a range of colors and complex looking texture.

Or, you can do both! Roll your scrap ends from the background-less extruded cane through the pasta machine, punch a stack of discs to put back into the extruder, extrude snakes to your heart’s content and make Lucy’s snake and line textured sheets. Then accent them with cane slices. Don’t you love how versatile polymer can be? Even using the same stack of clay through several techniques.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

 

 

Outside Inspiration: Lines of Paper

September 12, 2014

yulia-1Reader Corine Lindhorst was kind enough to write and share the work of this highly talented paper artist whose work you see here. Although it’s not extruded, the use of long strips of paper is not unlike using long snakes of extruded clay to form patterns and images. The images in the case of these paper illustrations by Yulia Brodskaya are incredibly fluid and capture nuances that some pencil and paint artists with their limitless color and texture options can’t always accomplish.

yulia-1 (1)

Yulia started working as a graphic designer and illustrator until realizing her passion was in paper. Now, she says she “draws with paper instead of on it.” And very, very successfully I might add. In just the 8 years since she started experimenting in paper illustration, she has amassed a large list of huge clients from Starbucks to Godiva, Target, Sephora and The New York Times Magazine. This is one of her more colorful and fun pieces, but may not be the most amazing of them. Her portraiture has some amazingly emotional eyes and facial expressions, especially considering the limitations of the medium. Or are they limitations?

Okay, you clay extruder illustrators … get to it. There is a market for you and one with deep pockets if you’re up for the challenge!

Take a closer look at Yulila’s work on her website but for a quick and powerful overview, take a look at this post on the “This is Colossal” blog.

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Extruded Moonlight

September 11, 2014

Extruded Light by Claire FairweatherClaire Fairweather, herself, sent this along when she saw we were doing an extruded themed week. In her words: “‘Extruded Light’ is a candle bowl, approximately 6-inches in diameter. I made it by winding extruded, translucent Premo polymer clay around a spherical glass bowl. It looks great with a color changing LED candle in it, but is difficult to photograph. The white candle light, in this photograph, shows the extruded strings the best.”

I know how you all love translucent clay applications, so it would have been hard not to share this. The idea is pretty simple, but the wrapped strings add a calm horizontal texture. My editorial assistant, Paula Gilbert, is here with me for the opening of The Great Create at which I am doing demos (tonight  in Denver!) and teaching a class on Saturday. Paula saw this bowl and said that looks like a glowing moon. And, so it does. I wish I had time to ask Claire how she got the craters in it or if they were incidental. Happy, unintended element if so.

Claire creates award-winning polymer work and writes her blog from New Zealand.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Mandala Yarns

September 10, 2014

9414438194_a2df9fd7de_bToday, I pulled up this fun piece for you.

This is not, obviously, all about extrusion, but I couldn’t pass it up. This elephant is only one in a series of decorated elephant forms created by Latvian artist Kni Kni. She did one for each month of the year. This mandala elephant was created for August. She uses extruded ‘yarns’ as she calls them, to wrap around the center form, which was pressed from a handmade stamp. Her ‘yarns’ were also used to decorate the elephant’s features.

In other work, we see quite a bit of the extruded ropes wrapped in swirls and even indented to make the striated lines you see here, but it is usually used on fully covered forms. The open space on the elephant helps keep the finely and skillfully decorated piece from getting overwhelmingly busy.

You can read about how and why Kni created this particular elephant on her blog. These are actually even more amazing when you see the whole series. Go take a look at them all on her Flickr photostream.

 

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Working Well with One Concept

January 2, 2013

As an artist, do you spend your time learning a variety of techniques so you have many options to express yourself, or do you find one approach you like and work with it continuously until you have it done perfectly?

I suspect most polymer artists are drawn to this medium because of the variety of effects and applications possible. But some people can become completely enamored of a single application and I’m rather glad for that on most occasions. Take Cathy Braunlin’s work. She has really gotten covering objects in extruded rope filigree down to, well, an art. Her technique is straight forward–swirls and zig-zags fitted onto the surface of an object, then painted with mica powders usually in a rainbow of colors. The effect is quite dramatic and is the epitome of eye candy.

42A004-Second-(Braunlin)

 

Cathy covers vases, lamps, pens, and other household items as well as using this technique on a variety of jewelry forms, all in this neat but varied texture. Is she a well accomplished polymer artist? It would depend on how you define “accomplished”. It’s also a question of whether labeling one in such a manner is important on any level. I enjoy her work and I bet many of you will also. She has taken this approach and done quite well with it. And all I can say is that I’m glad for it.

 

 

Combining Filigree, Embroidery and Applique

June 19, 2015
Posted in

U55a0Zvy6Ko

Take a close look at this jewelry set. How many variations of impressing, winding, twisting, layering and embedding little bits of clay do you see here? I’ve gotten a different count each time; I’m giving up on trying to give it a number and have spent my time admiring and determining the variation. And the patience. The lining up of these little bits to create lines or to create dense areas of texture is very precise. The variety enlivens the limited palette, which would otherwise be relying primarily on the contrast of lights and darks for impact.

This particular image was found on Pinterest attached to a number of boards all leading to the same image link, which will not lead me to any websites where I can find more information about the artist. That is a little maddening because the name is listed right there. It even looks familiar, but I can’t search farther for the simple reason that I can’t type in those letters. So, I’m sitting at a dead-end without any more information for you. I’m hoping one of you wonderful readers can read the text and then can send me a link. I believe this was pulled off vk.com (for the English only folks on here … it’s like Facebook for Eastern Europe and happens to be the #1 most visited site in that part of the world, as well as falling into the top 50 most visited sites worldwide), so I’m hoping someone can find it for us. You know how I don’t like to avoid bringing you art simply because I can’t find its origin, and I do like correcting that.

And as a little reminder in that vein … always add the artist’s name or website to your pins, even if you are just pinning it for yourself. Anything that is pinned on a non-private board (the default for Pinning) can and usually is picked up by others, but when it’s picked up off a home page that changes (like blogs) or a page that is temporary or the link gets broken or removed, the artist is no longer linked. If you like it enough to pin it, do what you can to ensure people who pull your pins can find the person who kindly shared their work with us and inspired us in the first place.

*Update* Many thanks go out to our reader Janna who found our the website of our artist, Olesyah Kalenova: http://vk.com/olesyakalenovahandmade.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Read More

More Fun with Extruders

September 13, 2014
Posted in

So after a week of extruder contemplation, have you gone into the studio to try out some new ideas yourself? Well, if not, but you’re anxious to try something out, here are a few ideas for you.

lilu-12287_320

 

A shaped cane with no background fill? Is that possible? According to Lilu of Russia, you can do this with an extruder. How is that possible? Even our brave artist here can’t say how this works, but can show us successful results. The caveat is that you lose about half your clay to scraps as the ends come out mangled. But, with so many scrap cane techniques to put those towards, that might not be the worse thing to happen.

42d9d8c2a73114b8a7a1d0d4cec3f154

 

 

For those of you who want something more straightforward and less experimental, try these extruded snake surface designs with graduated colors created by Lucy Struncova. No real mysteries here … just extrude small snakes in graduated colors (if you’ve not done that before, go here for the classic tutorial on creating rainbow snakes with an extruder), lay them side by side, use the edge of a credit card, or long thin needle tool to impress the lines perpendicular to the snakes and cut out shapes as desired. A quick easy way to get a surface design with a range of colors and complex looking texture.

Or, you can do both! Roll your scrap ends from the background-less extruded cane through the pasta machine, punch a stack of discs to put back into the extruder, extrude snakes to your heart’s content and make Lucy’s snake and line textured sheets. Then accent them with cane slices. Don’t you love how versatile polymer can be? Even using the same stack of clay through several techniques.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

 

 

Read More

Outside Inspiration: Lines of Paper

September 12, 2014
Posted in

yulia-1Reader Corine Lindhorst was kind enough to write and share the work of this highly talented paper artist whose work you see here. Although it’s not extruded, the use of long strips of paper is not unlike using long snakes of extruded clay to form patterns and images. The images in the case of these paper illustrations by Yulia Brodskaya are incredibly fluid and capture nuances that some pencil and paint artists with their limitless color and texture options can’t always accomplish.

yulia-1 (1)

Yulia started working as a graphic designer and illustrator until realizing her passion was in paper. Now, she says she “draws with paper instead of on it.” And very, very successfully I might add. In just the 8 years since she started experimenting in paper illustration, she has amassed a large list of huge clients from Starbucks to Godiva, Target, Sephora and The New York Times Magazine. This is one of her more colorful and fun pieces, but may not be the most amazing of them. Her portraiture has some amazingly emotional eyes and facial expressions, especially considering the limitations of the medium. Or are they limitations?

Okay, you clay extruder illustrators … get to it. There is a market for you and one with deep pockets if you’re up for the challenge!

Take a closer look at Yulila’s work on her website but for a quick and powerful overview, take a look at this post on the “This is Colossal” blog.

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Read More

Extruded Moonlight

September 11, 2014
Posted in

Extruded Light by Claire FairweatherClaire Fairweather, herself, sent this along when she saw we were doing an extruded themed week. In her words: “‘Extruded Light’ is a candle bowl, approximately 6-inches in diameter. I made it by winding extruded, translucent Premo polymer clay around a spherical glass bowl. It looks great with a color changing LED candle in it, but is difficult to photograph. The white candle light, in this photograph, shows the extruded strings the best.”

I know how you all love translucent clay applications, so it would have been hard not to share this. The idea is pretty simple, but the wrapped strings add a calm horizontal texture. My editorial assistant, Paula Gilbert, is here with me for the opening of The Great Create at which I am doing demos (tonight  in Denver!) and teaching a class on Saturday. Paula saw this bowl and said that looks like a glowing moon. And, so it does. I wish I had time to ask Claire how she got the craters in it or if they were incidental. Happy, unintended element if so.

Claire creates award-winning polymer work and writes her blog from New Zealand.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Read More

Mandala Yarns

September 10, 2014
Posted in

9414438194_a2df9fd7de_bToday, I pulled up this fun piece for you.

This is not, obviously, all about extrusion, but I couldn’t pass it up. This elephant is only one in a series of decorated elephant forms created by Latvian artist Kni Kni. She did one for each month of the year. This mandala elephant was created for August. She uses extruded ‘yarns’ as she calls them, to wrap around the center form, which was pressed from a handmade stamp. Her ‘yarns’ were also used to decorate the elephant’s features.

In other work, we see quite a bit of the extruded ropes wrapped in swirls and even indented to make the striated lines you see here, but it is usually used on fully covered forms. The open space on the elephant helps keep the finely and skillfully decorated piece from getting overwhelmingly busy.

You can read about how and why Kni created this particular elephant on her blog. These are actually even more amazing when you see the whole series. Go take a look at them all on her Flickr photostream.

 

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14-P3 Fall-Play cover Full sm   Blog2 -2014-02Feb-2   3d star ad  Polymania Advert 125  tpa-125x125-blog

Read More

Working Well with One Concept

January 2, 2013
Posted in

As an artist, do you spend your time learning a variety of techniques so you have many options to express yourself, or do you find one approach you like and work with it continuously until you have it done perfectly?

I suspect most polymer artists are drawn to this medium because of the variety of effects and applications possible. But some people can become completely enamored of a single application and I’m rather glad for that on most occasions. Take Cathy Braunlin’s work. She has really gotten covering objects in extruded rope filigree down to, well, an art. Her technique is straight forward–swirls and zig-zags fitted onto the surface of an object, then painted with mica powders usually in a rainbow of colors. The effect is quite dramatic and is the epitome of eye candy.

42A004-Second-(Braunlin)

 

Cathy covers vases, lamps, pens, and other household items as well as using this technique on a variety of jewelry forms, all in this neat but varied texture. Is she a well accomplished polymer artist? It would depend on how you define “accomplished”. It’s also a question of whether labeling one in such a manner is important on any level. I enjoy her work and I bet many of you will also. She has taken this approach and done quite well with it. And all I can say is that I’m glad for it.

 

 

Read More
If you love these posts ...