More Fun with Extruders
September 13, 2014
Inspirational Art
So after a week of extruder contemplation, have you gone into the studio to try out some new ideas yourself? Well, if not, but you’re anxious to try something out, here are a few ideas for you.
A shaped cane with no background fill? Is that possible? According to Lilu of Russia, you can do this with an extruder. How is that possible? Even our brave artist here can’t say how this works, but can show us successful results. The caveat is that you lose about half your clay to scraps as the ends come out mangled. But, with so many scrap cane techniques to put those towards, that might not be the worse thing to happen.
For those of you who want something more straightforward and less experimental, try these extruded snake surface designs with graduated colors created by Lucy Struncova. No real mysteries here … just extrude small snakes in graduated colors (if you’ve not done that before, go here for the classic tutorial on creating rainbow snakes with an extruder), lay them side by side, use the edge of a credit card, or long thin needle tool to impress the lines perpendicular to the snakes and cut out shapes as desired. A quick easy way to get a surface design with a range of colors and complex looking texture.
Or, you can do both! Roll your scrap ends from the background-less extruded cane through the pasta machine, punch a stack of discs to put back into the extruder, extrude snakes to your heart’s content and make Lucy’s snake and line textured sheets. Then accent them with cane slices. Don’t you love how versatile polymer can be? Even using the same stack of clay through several techniques.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Extruded Fun
September 8, 2014
Inspirational Art
There is just too much fun being had out there with extruded clay methods lately, so let’s take a look at a handful of what is being done and see if we can’t entice you into a bit of extruded play this week!
This first piece by Spain’s Maribel Benito looks to be using the very popular cane blocks build from extruded canes. It’s not that the canes or application here are so unusual, but the fun combination of various sized circles, those delicious candy colors, the gradation of the canes and the well-tended finish make for a really beautiful piece that is both playful and sophisticated. It’s just well done.
I thought I’d go for short chatter today after my long Saturday expose. Let’s just enjoy this beauty today while I go dig up more extruded fun. The best place to find more of Maribel’s work would be on her Facebook page and on her blog.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Rainbow Turned into Flowers
August 23, 2014
Inspirational Art
Hopefully you’ve been having a fun week, but now for a fun weekend, right? How about something colorful and versatile to try in the studio?
These flower cup beads are created by starting with a rectangular, extruded cane then form a cup over a large ball stylus tool. I just like the stepping away from using circular extruded shapes for extruded canes. There is absolutely no reason not to make extruded canes with any shape you have available for your extruder. This long rectangular shape is particularly fun because of the striations you can make. You will see this in the bead on the first page of the tutorial that I am giving you. And why not reform the cane into long teardrops or flatten them out a little more and roll then into a rainbow jelly roll? Extrude a few and see what you can come up with!
On Poly Cat’s pages , you’ll find the Rectangular Rainbow Extruded Cane being used to create a bead, then there’s the flower cup bead steps you use the cane slices with as well. Pop the URLs for any of these links into Google translate if you want to read them in English, and your browser doesn’t automatically translate them for you. If I understand the translation correctly, the techniques she uses are inspired by others, and she has links and references to those sources so you have even more to check out if you like.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
So after a week of extruder contemplation, have you gone into the studio to try out some new ideas yourself? Well, if not, but you’re anxious to try something out, here are a few ideas for you.
A shaped cane with no background fill? Is that possible? According to Lilu of Russia, you can do this with an extruder. How is that possible? Even our brave artist here can’t say how this works, but can show us successful results. The caveat is that you lose about half your clay to scraps as the ends come out mangled. But, with so many scrap cane techniques to put those towards, that might not be the worse thing to happen.
For those of you who want something more straightforward and less experimental, try these extruded snake surface designs with graduated colors created by Lucy Struncova. No real mysteries here … just extrude small snakes in graduated colors (if you’ve not done that before, go here for the classic tutorial on creating rainbow snakes with an extruder), lay them side by side, use the edge of a credit card, or long thin needle tool to impress the lines perpendicular to the snakes and cut out shapes as desired. A quick easy way to get a surface design with a range of colors and complex looking texture.
Or, you can do both! Roll your scrap ends from the background-less extruded cane through the pasta machine, punch a stack of discs to put back into the extruder, extrude snakes to your heart’s content and make Lucy’s snake and line textured sheets. Then accent them with cane slices. Don’t you love how versatile polymer can be? Even using the same stack of clay through several techniques.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Read More
There is just too much fun being had out there with extruded clay methods lately, so let’s take a look at a handful of what is being done and see if we can’t entice you into a bit of extruded play this week!
This first piece by Spain’s Maribel Benito looks to be using the very popular cane blocks build from extruded canes. It’s not that the canes or application here are so unusual, but the fun combination of various sized circles, those delicious candy colors, the gradation of the canes and the well-tended finish make for a really beautiful piece that is both playful and sophisticated. It’s just well done.
I thought I’d go for short chatter today after my long Saturday expose. Let’s just enjoy this beauty today while I go dig up more extruded fun. The best place to find more of Maribel’s work would be on her Facebook page and on her blog.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Hopefully you’ve been having a fun week, but now for a fun weekend, right? How about something colorful and versatile to try in the studio?
These flower cup beads are created by starting with a rectangular, extruded cane then form a cup over a large ball stylus tool. I just like the stepping away from using circular extruded shapes for extruded canes. There is absolutely no reason not to make extruded canes with any shape you have available for your extruder. This long rectangular shape is particularly fun because of the striations you can make. You will see this in the bead on the first page of the tutorial that I am giving you. And why not reform the cane into long teardrops or flatten them out a little more and roll then into a rainbow jelly roll? Extrude a few and see what you can come up with!
On Poly Cat’s pages , you’ll find the Rectangular Rainbow Extruded Cane being used to create a bead, then there’s the flower cup bead steps you use the cane slices with as well. Pop the URLs for any of these links into Google translate if you want to read them in English, and your browser doesn’t automatically translate them for you. If I understand the translation correctly, the techniques she uses are inspired by others, and she has links and references to those sources so you have even more to check out if you like.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
