Taking You Sideways

February 23, 2020

How often do you sit down at the studio table to create something and think, what am I going to do with the edges of my design? It’s unlikely to be the first thing you think of but does it come into play at all? This is something we have been exploring in the Virtual Art Box this month. We started with work on texturing edges for variation but this week, I thought we talk about the sides of edges!

As you know, we work in a 3-dimensional material and, therefore, even a flat pendant has not just a front and back, but sides and a top and bottom. Do you consider and treat those with anything like the consideration given to the front? Well, if you haven’t done that often to date, let’s make it a thing from now on!

Whether it’s a flat pendant, a bangle bracelet, the lip of a vase, or the base of a sculpture, those edges on your three-dimensional objects should be planned out just like every other surface. If it’s going to be seen, it should be well considered.

Side Effects

So, here’s an artist who obviously considers the side view (and the back and the top and the bottom) in every piece she creates. Sarah Shriver, known for her canes, doesn’t hesitate to add pattern and additional embellishments to all surfaces of her beads. The thick cut of the patterned layers on the back and snakes that work like frames in the front, bring the patterns into the side view, making the sides an integral part of her beads rather than an afterthought.

Sarah even treats rounded edges, such as lentil beads, with additional embellishment. See the twisted snake that encompasses her lentil beads in this post’s opening image? It not only adds pattern and energy to the piece, making them key components of the design, but they seal off the two halves of the lentil with no finishing of a seam to contend with.

Donna Kato is doing something similar to layering in these bangles below. There are several layers and patterns just on the side edge, but with the dome of the bangle surface curving into the side, it all becomes a unified design. Even if you don’t make bangles this thick and domed, you can certainly treat the edge with layers and patterns of this kind.

And what about thick slabs of mokume or canes? These would create a pattern for the back as well as the sides and can be used either as a base upon which to build the front view or it could be covered by a thin, solid sheet of clay and just be the pattern for the back and sides. I couldn’t find any photos of someone doing this in polymer although I’ve seen it. However, looking at examples in other materials can show you how good such an option can look.

This is mokume in metal, the original material for mokume gane, designed by an Australian company, Soklich & Co. Just look at how beautifully the layered pattern decorates the side. It would not be hard to imagine getting a similarly patterned side from thick slices of mokume off a stack whose layers were not rolled overly thin.

Of course, solid, straight cut, rounded, wrapped, or otherwise well finished edges may do just fine. It all depends on what the piece is about, what your intention is for it. Just consider that you have so very many options beyond solid colors for your edge’s sides.

If you want to dive in deeper with my wonderful group of Art Boxers, there is still time to get this month’s bundle and get a subscription for next month. Get it all right here!

 

Taking Off

I’m taking the weekend off to spend it with one of my amazing and beautiful children who is out visiting me. Our intention this weekend – to just relax and live in the moment. A coastal drive, tidepools, rock shops, gluten free bakeries, and yoga with baby goats in pajamas (the baby goats are PJs, not us … oh the cuteness!) are on the list to fill our few short days. So, if you reach out this weekend and I don’t answer, I’ll get you on Monday! I hope you have a beautiful week!

Dynamic Visual Movement (And Survey!)

Forest Rogers, Badb Catha

Conjure up in your mind, as best you can, some of the most dynamic and energetic pieces of art you’ve ever seen? They are probably something that really moved you (pun not originally intended) or to which you were drawn and just couldn’t look away. Dynamic movement in art is just what it sounds like—it’s lively, energetic, impactful and, well, moving. More specifically, it refers to something in the composition that inexorably moves the eye from one thing to the next.

Just look at some classic examples such as Vincent van Gogh’s The Starry Night, Jackson Pollock’s No. 5, 1948, and Duchamp’s Nude Descending a Staircase, No. 2. In each case, it is hard to just plant your eyes at one point and gaze there. The lines quite insistently draw your eye along from one point to another. But why? Doesn’t all visual art, 2D or 3D, have lines of some sort? What makes these lines so dynamic?

 

Well, it is the combination of several characteristics that, when used together, can create dynamic movement visually. Although it would be nice to hand you a single, simple formula for this, it is not one particular set of characteristics but rather a kind of recipe you put together. The recipe includes some combination of lines, repetition, gradation, and/or the placement of objects.

Each “recipe” brings about a different flavor profile, a different atmosphere or emotion. The Starry Night has a breezy and calm feel, even thought the sky is very active, due to the fairly consistent repetition of brush strokes and the flowing lines they create. So, the recipe here is mostly repetition and line. Nude Descending a Staircase, on the other hand, even with so many lines, actually gets most of its movement from gradation, repetition, and placement. The shapes go from dark and unclear to light and more recognizable, are repeated more or less in each gradation, and the diagonal placement with the clearest form at the bottom of the diagonal slope moves our eye downward (which is easier for us to see movement in due to our lifelong relationship and expectation of gravity!)

So, if you want to add or just tweak a design to have more dynamic visual movement, try out a combination of these characteristics. Let’s look at examples of how they are used to create very obvious dynamic visual movement in polymer and other craft art.

 

Going with the Flow

The key to movement will be to focus on the flow of marks, shapes, colors, etc. in your work. This isn’t always fluid, mind you, but fluid lines and shapes do readily create a sense of movement. Some of the best inspiration for flow comes from things that we see physically flowing in the world around us.

For instance, Forest Roger’s work, although not themselves images that we see in the real world, regularly draw energy and impact from the representation of fluid movement. In the piece you see at the opening of this post, Badb Catha (Battle Crow), the flow of fabric and feathery wings are dramatically sculpted in a frozen moment of furious movement. To see this kind of movement in reality would be but a flash amidst a flurry of action. We never get to a solid glimpse of those moments when it happens in front of us, so our minds expect and kind of fill in the movement. That expectation of continued movement in nearly all parts of the sculpture is what imbues the piece with such intense energy.

 

Here is a similarly dynamic piece by a ceramic sculptor by the name of Yuanxing Liang that I just had to share. It’s hard to believe it’s not just an illustration the movement and details are so lush and yet delicate. You can see the many sides and more detail of this particular piece on Colossal here.

 

Forest does create additional drama with the vivid red of the fabric and the pointed and dangerous looking ends and edges. But movement represented in a frozen moment can also be coolly dramatic without being this intense. Just look at this silver and gold Wind Necklace by Chao Hsien Kuo. It’s delicate form and the repetition of undulating lines terminate in slightly rounded and gold tipped ends so that even though there is a tremendous amount of movement in the design, it feels contained and graceful.

 

There is a level of complexity in these first few examples that might feel a bit intimidating, but you can achieve quite a bit of movement with simple shapes and repetition. Ford and Forlano’s Vine Necklace looks rather like the rippling reflection of light on water in this zig-zagging necklace made up of right-angle tube beads and leaf canes. Stringing the angled beads, one after another, creates an erratic movement that doesn’t stop because there is no focal point or other place for the eye to rest. The movement itself becomes the focus of the necklace.

 

I have found that one of the easiest and most graceful ways to show movement is simply to use curved lines, particularly ones that are repeated and nestled or otherwise follow the lines of the adjoining or nearby lines or forms. In this necklace’s layers of leather (yeah, I thought it was polymer first time I saw it!), a piece created by Irina Fadeeva, the folded edges start from a point along one of the focal stones and then radiate out, following the curve of the layer below. That repetition of curved lines along with how one section flows and fits along the edges of the adjoining sections keep your eye flowing back and forth across the piece even though there are three very prominent focal points to stop and focus on. Those lines pull on your gaze to keep looking around.

 

Here are a few more beautiful examples of nestled lines but this time as surface design. Ceramicist Natalie Blake creates the most gorgeous movement in her textures by lining up carved line after carved line then developing the atmosphere of calm or blossoming energy through the use of delicate or dramatic, but always glowing, color.

 

Keep in mind that when creating lines for surface design, they do not need to be well defined, especially if you have gradation in your design recipe. Look at the delicate, sometimes barely there, lines in this beautiful enamel brooch by Ruth Ball. The lines encircle each other like a ripple in a pond although it’s actually a swirl, moving from the center point outward. The lines get gradually more delicate as they get farther from the center. It is, however, the gradation from that black to purple to a wisp of sky-blue that brings in the drama and heightens that sense of movement as the whorl swoops around and up towards the top of the brooch.

 

All the above examples use repetition to some extent to assist in the sense of movement. However, you can leave repetition out of the recipe and still have a sense of movement. For this you need to add placement to the recipe.

Here is a beautiful example by Donna Kato showing how placement creates flow by making things look like they’re about to fall over or roll off. This is accomplished with the use of tension points – where elements are just barely or not quite touching each other – and diagonals. This combination makes things appear unstable because we expect things that are not firmly attached to roll or tumble downhill. This works much like the frozen dramatic moment of movement we saw in the first couple of examples, in that it gives us a sense that movement is impending, adding energy to the design.

 

So now, after all these examples, do you recognize elements that show movement in your own work or have you come up with some ideas you’d like to try to add more movement in your work? It’s not that a sense of movement is necessary in any design, but you need to decide whether or not movement is important for your piece and the energy level you want to convey. Like any other design element, you want to give yourself the opportunity to include or exclude it intentionally.

 

Moving Down the Road

So, this weekend is the first of four weekends in a row that I’m going to be traveling so I’m getting these blogs together ahead of time, but I’ll try and sneak in some photos from the road, especially if I see anything artistically inspiring.

For those asking how I’m doing, all I can tell you is that the progress on my arm is still very slow. I’m going to check in with my favorite kinesiologist when I am in Denver in a couple weeks to see what more can be done but I am preparing to handoff or otherwise get around doing the print production that is so hard on my arm which, unfortunately, is primarily the project tutorials with their tons of photos and a lot of layout tweaking. But I have to tell you, I’m already having withdrawals (I love doing layout!) but my brain doesn’t stop planning and have a bunch of ideas, but I need your help …

Survey, Discount, and CA$H Drawing

As I think I mentioned last week, my editorial assistant and I are working out our options for getting inspiring information to you, but I don’t want to create what WE think you want. We want to KNOW what you want.

To that end we are asking you to help us out by filling out a survey. The survey will help us determine what kind of content you might be looking for and see how it can mesh with some of the ideas we have in mind. It will also help us with final decisions about content for the magazine this next year.

So, would you give me just 2-3 minutes to fill out this survey? Not only does it help us help you get the information you want and need, I’m giving away a little something to make it worth your while …

All survey respondents will get a 15% off coupon for your entire cart on our website and … drum roll please … CASH money! A randomly drawn survey filler-outer will get $50 cash! Who couldn’t use a few extra bucks, hmm?

Look for the 15% off code on the page that comes up after submitting the survey and write it down. Its good through the end of October. We’ll send a reminder mid-October as well so you don’t miss out.

Survey closes on September 29th. The drawing for the cash, a purely random drawing, will take place on September 30th and winner will be notified by email.

Okay, that’s it for this weekend. Have a beautiful week and have fun making note of all the visual movements you find in designs every day.

Close Color Calls

December 14, 2016

lindly13Our Color Spotlight section of the Winter 2016 issue of The Polymer Arts was graced by Donna Kato, interview by Lindly Haunani. How amazing is that combination?! Donna let us in on her colored pencil experiments and her reasoning behind her approach. Although colored pencil on polymer is not new, it is always fascinating to see into the workings of an artistic mind and since this section focuses on color choices and inspiration, we got a peek at how this master choose colors for her explorations.

One piece that I was sent to consider including was this beautiful necklace you see here. We ended up focusing so much on the pencil work that there really wasn’t a place for this in the article but it certainly deserves a bit of attention. Each section of the necklace deals with one basic hue in two different values. The disparate placement offsets the regularity of each hue showcased in the same shape and the relative dark to light hue being basically the same within each color set. The delicious saturated colors don’t hurt it at all either.

The most active page to see what Donna has been up to in her own art looks to be her Facebook page although you can see some of her more honed work and learn from her wisdom by going over to check out her classes on CraftArtEdu.

 

Inspirational Challenge of the Day: Let’s play with color hue. Pick 2-3 colors–they can contrast, be analogous (next to each other on the color wheel) or simply be your favorites.  Choose two variations of each color–different saturation (how pure a hue it is), values (dark or light), or tints/shades (additions of white/black.) Now use just these to create a new piece.

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.

Shades of Clay Sept 15 Blog   never knead -july-2015c-125   The Great Create Sept 15 blog   businesscard-3.5inx2in-h-front

_________________________________________

Time to get Excited! Here’s the Winter 2016 Cover: On theSurface

cover-16p4-fnl-med-96-padded

This next issue gets down to a subject most every polymer clayer can get behind. Or on top of really. That being surface design. The subject is a pretty broad one so it was tough deciding just what to put in the issue but we ended up with a very exciting mix of articles. Here is just part of the list:

  • The Well Designed Surface
  • Raised Surface Coloration
  • Unique Surface Variety
  • Ink Resist Polymer Painting
  • Creating Custom Texture Sheets
  • Wall Stories: The Art of Alev Gozonar
  • Color Spotlight with Donna Kato
  • The Backside of Brooches
  • Giving Away the Shop: Pros & Cons of Freebies & Giveaways
  • … and much more.

If you need to renew or purchase a subscription, or would like to pre-order your Winter issue,  you can go to our website here.

There is much to do so I am off to get this issue together and polished for you. We’ll get back to our regularly scheduled eye candy on Monday!

 

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.

Shades of Clay Sept 15 Blog   never knead -july-2015c-125   The Great Create Sept 15 blog   businesscard-3.5inx2in-h-front

_________________________________________

 

Looking Back for Inspiration

March 30, 2016

A quick note on the Polymer Journey 2016 book … we’ve been able to extend the introductory sale through Friday, so if you haven’t reserved your copy or were waiting for payday, this is your chance!  Go to the website today before the price goes up this weekend.

TLilin deco butterflieshere are timeless techniques as well as timeless art. This easy but impressive looking technique, painting with mica powders on molded clay, was posted by Lilin in 2008. This particular construction harkens back to the art deco style with the enameled look of the butterfly wings against the stylized faces. It gives them an antique air. Lilin credits Donna Kato as her inspiration although she doesn’t say if that was from a book or class. But she gives her own brief instructions and tips, enough for you to get some ideas and run with a new design of your own.

The instructions for these are on this blog post. Lilin hasn’t posted since 2009 and I couldn’t find any reference to her moving her work to somewhere else. I am always curious how an artist progresses. It’s both encouraging and fascinating to see people improve their skills and to see what directions they chose. So I am curious. If anyone knows what Lilin is up to now, let me know and I’ll post an update here.

 

Inspirational Challenge of the Day: Find a new way to apply an old technique. Look through your older project books, back issues of magazines, or your favorite tutorial sites and find something you haven’t done in a while or never tried and use it with your present forms and color palettes. What do you do differently today that you didn’t when the tutorial was published or when you first used it? It’s interesting to see how your approach has shifted.

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

      

   PCTV March 2016 Blog   

___________________________________________

Wooden Canes and Turquoise Veins

September 23, 2015

Cara-Jane-Polymer-Clay-Faux-Turquoise-Ring-Polymania-2016-wmI was going to focus on mixed media this week, but I have run into a plethora of fabulous faux wood work, so I can’t resist showing some more. Where is this coming from? Is someone out there teaching a class or sharing a tutorial that I missed? Well, for whatever the reason, the trend has brought us some truly lovely faux wood like we’ve rarely seen before.

This ring by the ever-exploring Cara Jane Hayman just knocked my socks off. What a wonderful mahogany and inlaid look she achieved here. It’s dramatically paired with an almost graphical looking faux turquoise filled with a bold spiderweb veining. It’s terrifically real looking but aside from the impressive faux work, the pairing of visual textures in an uncomplicated form highlighted with a meticulous finish makes for a beautiful piece.

If you happen to be in the UK next year around, say, March 18th-20th, you absolutely will need to go to Polymania 2016 where Cara Jane will be teaching this ring as a workshop. You will also be able to take workshops with Claire Wallis, Bettina Welker and Donna Kato at this 3-day event. Check your calendars and get more information on this event and the skinny on this ring on Cara Jane’s website.

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

     

   TPA_McGuire_blog ad  Print

Blended Ikat

April 16, 2014

As we look at polymer clay inspired by fabrics, this necklace by Eva Haskova, from the Czech Republic, looks much like woven ikat cloth. If you are not familiar with ikat, it is a dyeing technique that uses a resist dyeing process to pattern textiles. This style of tie-dye originated in Indonesia, and because of the difficulty involved in weaving ikat, some cultures believe the fabrics contain magical powers. Notice on the pendant how the texture resembles fabric that has been bound by threads during the dyeing process. The clarity of pattern in this piece is reminiscent of weft ikat weavings, giving it a contemporary yet ethnic design motif.

5522165091_44e0dc6a90_o

Eva developed her polymer skills with the help of Donna Kato, Carol Blackburn, and Leslie Blackford. She likes to work with natural materials, wire, and ceramic clay, as well as sewing and hand printing textiles. To see more of her work, visit her Flickr site or her website.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   Millefiori eggs   14P1 cover Fnl

Spanning Spinning Rings

April 9, 2014

Another design idea based on spanning the distance across the fingers along with including kinetic design in a ring can be found in one of Donna Kato’s first spinner rings. These rings have an element that will actually twirl when you spin them.  In this one it’s obviously the central red bead but the striped lines and wavy edge of the larger element already gives you a sense of movement. Plus this element wraps over both fingers to either side of the finger wearing it which would stabilize the large piece as well as make it really hard to miss!

5f9653978cb110af8229c5068d1f64f2

The engineering of new designs is one of Donna’s favorite aspects of jewelry making. But of course, Donna is one of those people just brimming with ideas not just for designs but for products, classes and business as well. Besides her line of Kato products, she is also the founder and one of the more prolific instructors at Craft Art Edu. Her spinner ring designs have evolved since the appearance of this one here several years ago and now you can take advantage of her experimentation and perfecting of the design in her spinner ring class.  Lucky you!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14P1 cover FnlBlog2 -2014-02Feb-5   Millefiori eggs        

Stack ’em Up

February 12, 2014

Stacking layers of polymer clay can be a new way of looking at this material sculpturally as well as way to combine and reveal color. Spain’s Natalia García de Leániz (known as Tatana on Flickr) makes these chunky polymer beads by stacking the sliced clay and making bold bracelets with these large design elements.

5015466815_fc92dde297

As Nataila says, “Inspiration exists, but it has to find you working.” She works with her husband, Daniel Torres, in an “artnership” where they share ideas and yet they work in different, complementary or even opposite styles. Natalia makes all of her work in polymer clay, frequently working with textures and paint effects on clay. There are some tutorials on her website (and of CraftArtEdu) as well as a lot of additional photographs of her work. They plan to be at EuroSynergy in Malta this year, and if you want an excuse to travel to Madrid, Spain, the couple holds workshops in their studio and throughout Europe!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14P1 cover Fnl   PCW blue string art cane   Blog2 -2014-02Feb-2

Taking You Sideways

February 23, 2020
Posted in

How often do you sit down at the studio table to create something and think, what am I going to do with the edges of my design? It’s unlikely to be the first thing you think of but does it come into play at all? This is something we have been exploring in the Virtual Art Box this month. We started with work on texturing edges for variation but this week, I thought we talk about the sides of edges!

As you know, we work in a 3-dimensional material and, therefore, even a flat pendant has not just a front and back, but sides and a top and bottom. Do you consider and treat those with anything like the consideration given to the front? Well, if you haven’t done that often to date, let’s make it a thing from now on!

Whether it’s a flat pendant, a bangle bracelet, the lip of a vase, or the base of a sculpture, those edges on your three-dimensional objects should be planned out just like every other surface. If it’s going to be seen, it should be well considered.

Side Effects

So, here’s an artist who obviously considers the side view (and the back and the top and the bottom) in every piece she creates. Sarah Shriver, known for her canes, doesn’t hesitate to add pattern and additional embellishments to all surfaces of her beads. The thick cut of the patterned layers on the back and snakes that work like frames in the front, bring the patterns into the side view, making the sides an integral part of her beads rather than an afterthought.

Sarah even treats rounded edges, such as lentil beads, with additional embellishment. See the twisted snake that encompasses her lentil beads in this post’s opening image? It not only adds pattern and energy to the piece, making them key components of the design, but they seal off the two halves of the lentil with no finishing of a seam to contend with.

Donna Kato is doing something similar to layering in these bangles below. There are several layers and patterns just on the side edge, but with the dome of the bangle surface curving into the side, it all becomes a unified design. Even if you don’t make bangles this thick and domed, you can certainly treat the edge with layers and patterns of this kind.

And what about thick slabs of mokume or canes? These would create a pattern for the back as well as the sides and can be used either as a base upon which to build the front view or it could be covered by a thin, solid sheet of clay and just be the pattern for the back and sides. I couldn’t find any photos of someone doing this in polymer although I’ve seen it. However, looking at examples in other materials can show you how good such an option can look.

This is mokume in metal, the original material for mokume gane, designed by an Australian company, Soklich & Co. Just look at how beautifully the layered pattern decorates the side. It would not be hard to imagine getting a similarly patterned side from thick slices of mokume off a stack whose layers were not rolled overly thin.

Of course, solid, straight cut, rounded, wrapped, or otherwise well finished edges may do just fine. It all depends on what the piece is about, what your intention is for it. Just consider that you have so very many options beyond solid colors for your edge’s sides.

If you want to dive in deeper with my wonderful group of Art Boxers, there is still time to get this month’s bundle and get a subscription for next month. Get it all right here!

 

Taking Off

I’m taking the weekend off to spend it with one of my amazing and beautiful children who is out visiting me. Our intention this weekend – to just relax and live in the moment. A coastal drive, tidepools, rock shops, gluten free bakeries, and yoga with baby goats in pajamas (the baby goats are PJs, not us … oh the cuteness!) are on the list to fill our few short days. So, if you reach out this weekend and I don’t answer, I’ll get you on Monday! I hope you have a beautiful week!

Read More

Dynamic Visual Movement (And Survey!)

September 22, 2019
Posted in ,

Forest Rogers, Badb Catha

Conjure up in your mind, as best you can, some of the most dynamic and energetic pieces of art you’ve ever seen? They are probably something that really moved you (pun not originally intended) or to which you were drawn and just couldn’t look away. Dynamic movement in art is just what it sounds like—it’s lively, energetic, impactful and, well, moving. More specifically, it refers to something in the composition that inexorably moves the eye from one thing to the next.

Just look at some classic examples such as Vincent van Gogh’s The Starry Night, Jackson Pollock’s No. 5, 1948, and Duchamp’s Nude Descending a Staircase, No. 2. In each case, it is hard to just plant your eyes at one point and gaze there. The lines quite insistently draw your eye along from one point to another. But why? Doesn’t all visual art, 2D or 3D, have lines of some sort? What makes these lines so dynamic?

 

Well, it is the combination of several characteristics that, when used together, can create dynamic movement visually. Although it would be nice to hand you a single, simple formula for this, it is not one particular set of characteristics but rather a kind of recipe you put together. The recipe includes some combination of lines, repetition, gradation, and/or the placement of objects.

Each “recipe” brings about a different flavor profile, a different atmosphere or emotion. The Starry Night has a breezy and calm feel, even thought the sky is very active, due to the fairly consistent repetition of brush strokes and the flowing lines they create. So, the recipe here is mostly repetition and line. Nude Descending a Staircase, on the other hand, even with so many lines, actually gets most of its movement from gradation, repetition, and placement. The shapes go from dark and unclear to light and more recognizable, are repeated more or less in each gradation, and the diagonal placement with the clearest form at the bottom of the diagonal slope moves our eye downward (which is easier for us to see movement in due to our lifelong relationship and expectation of gravity!)

So, if you want to add or just tweak a design to have more dynamic visual movement, try out a combination of these characteristics. Let’s look at examples of how they are used to create very obvious dynamic visual movement in polymer and other craft art.

 

Going with the Flow

The key to movement will be to focus on the flow of marks, shapes, colors, etc. in your work. This isn’t always fluid, mind you, but fluid lines and shapes do readily create a sense of movement. Some of the best inspiration for flow comes from things that we see physically flowing in the world around us.

For instance, Forest Roger’s work, although not themselves images that we see in the real world, regularly draw energy and impact from the representation of fluid movement. In the piece you see at the opening of this post, Badb Catha (Battle Crow), the flow of fabric and feathery wings are dramatically sculpted in a frozen moment of furious movement. To see this kind of movement in reality would be but a flash amidst a flurry of action. We never get to a solid glimpse of those moments when it happens in front of us, so our minds expect and kind of fill in the movement. That expectation of continued movement in nearly all parts of the sculpture is what imbues the piece with such intense energy.

 

Here is a similarly dynamic piece by a ceramic sculptor by the name of Yuanxing Liang that I just had to share. It’s hard to believe it’s not just an illustration the movement and details are so lush and yet delicate. You can see the many sides and more detail of this particular piece on Colossal here.

 

Forest does create additional drama with the vivid red of the fabric and the pointed and dangerous looking ends and edges. But movement represented in a frozen moment can also be coolly dramatic without being this intense. Just look at this silver and gold Wind Necklace by Chao Hsien Kuo. It’s delicate form and the repetition of undulating lines terminate in slightly rounded and gold tipped ends so that even though there is a tremendous amount of movement in the design, it feels contained and graceful.

 

There is a level of complexity in these first few examples that might feel a bit intimidating, but you can achieve quite a bit of movement with simple shapes and repetition. Ford and Forlano’s Vine Necklace looks rather like the rippling reflection of light on water in this zig-zagging necklace made up of right-angle tube beads and leaf canes. Stringing the angled beads, one after another, creates an erratic movement that doesn’t stop because there is no focal point or other place for the eye to rest. The movement itself becomes the focus of the necklace.

 

I have found that one of the easiest and most graceful ways to show movement is simply to use curved lines, particularly ones that are repeated and nestled or otherwise follow the lines of the adjoining or nearby lines or forms. In this necklace’s layers of leather (yeah, I thought it was polymer first time I saw it!), a piece created by Irina Fadeeva, the folded edges start from a point along one of the focal stones and then radiate out, following the curve of the layer below. That repetition of curved lines along with how one section flows and fits along the edges of the adjoining sections keep your eye flowing back and forth across the piece even though there are three very prominent focal points to stop and focus on. Those lines pull on your gaze to keep looking around.

 

Here are a few more beautiful examples of nestled lines but this time as surface design. Ceramicist Natalie Blake creates the most gorgeous movement in her textures by lining up carved line after carved line then developing the atmosphere of calm or blossoming energy through the use of delicate or dramatic, but always glowing, color.

 

Keep in mind that when creating lines for surface design, they do not need to be well defined, especially if you have gradation in your design recipe. Look at the delicate, sometimes barely there, lines in this beautiful enamel brooch by Ruth Ball. The lines encircle each other like a ripple in a pond although it’s actually a swirl, moving from the center point outward. The lines get gradually more delicate as they get farther from the center. It is, however, the gradation from that black to purple to a wisp of sky-blue that brings in the drama and heightens that sense of movement as the whorl swoops around and up towards the top of the brooch.

 

All the above examples use repetition to some extent to assist in the sense of movement. However, you can leave repetition out of the recipe and still have a sense of movement. For this you need to add placement to the recipe.

Here is a beautiful example by Donna Kato showing how placement creates flow by making things look like they’re about to fall over or roll off. This is accomplished with the use of tension points – where elements are just barely or not quite touching each other – and diagonals. This combination makes things appear unstable because we expect things that are not firmly attached to roll or tumble downhill. This works much like the frozen dramatic moment of movement we saw in the first couple of examples, in that it gives us a sense that movement is impending, adding energy to the design.

 

So now, after all these examples, do you recognize elements that show movement in your own work or have you come up with some ideas you’d like to try to add more movement in your work? It’s not that a sense of movement is necessary in any design, but you need to decide whether or not movement is important for your piece and the energy level you want to convey. Like any other design element, you want to give yourself the opportunity to include or exclude it intentionally.

 

Moving Down the Road

So, this weekend is the first of four weekends in a row that I’m going to be traveling so I’m getting these blogs together ahead of time, but I’ll try and sneak in some photos from the road, especially if I see anything artistically inspiring.

For those asking how I’m doing, all I can tell you is that the progress on my arm is still very slow. I’m going to check in with my favorite kinesiologist when I am in Denver in a couple weeks to see what more can be done but I am preparing to handoff or otherwise get around doing the print production that is so hard on my arm which, unfortunately, is primarily the project tutorials with their tons of photos and a lot of layout tweaking. But I have to tell you, I’m already having withdrawals (I love doing layout!) but my brain doesn’t stop planning and have a bunch of ideas, but I need your help …

Survey, Discount, and CA$H Drawing

As I think I mentioned last week, my editorial assistant and I are working out our options for getting inspiring information to you, but I don’t want to create what WE think you want. We want to KNOW what you want.

To that end we are asking you to help us out by filling out a survey. The survey will help us determine what kind of content you might be looking for and see how it can mesh with some of the ideas we have in mind. It will also help us with final decisions about content for the magazine this next year.

So, would you give me just 2-3 minutes to fill out this survey? Not only does it help us help you get the information you want and need, I’m giving away a little something to make it worth your while …

All survey respondents will get a 15% off coupon for your entire cart on our website and … drum roll please … CASH money! A randomly drawn survey filler-outer will get $50 cash! Who couldn’t use a few extra bucks, hmm?

Look for the 15% off code on the page that comes up after submitting the survey and write it down. Its good through the end of October. We’ll send a reminder mid-October as well so you don’t miss out.

Survey closes on September 29th. The drawing for the cash, a purely random drawing, will take place on September 30th and winner will be notified by email.

Okay, that’s it for this weekend. Have a beautiful week and have fun making note of all the visual movements you find in designs every day.

Read More

Close Color Calls

December 14, 2016
Posted in

lindly13Our Color Spotlight section of the Winter 2016 issue of The Polymer Arts was graced by Donna Kato, interview by Lindly Haunani. How amazing is that combination?! Donna let us in on her colored pencil experiments and her reasoning behind her approach. Although colored pencil on polymer is not new, it is always fascinating to see into the workings of an artistic mind and since this section focuses on color choices and inspiration, we got a peek at how this master choose colors for her explorations.

One piece that I was sent to consider including was this beautiful necklace you see here. We ended up focusing so much on the pencil work that there really wasn’t a place for this in the article but it certainly deserves a bit of attention. Each section of the necklace deals with one basic hue in two different values. The disparate placement offsets the regularity of each hue showcased in the same shape and the relative dark to light hue being basically the same within each color set. The delicious saturated colors don’t hurt it at all either.

The most active page to see what Donna has been up to in her own art looks to be her Facebook page although you can see some of her more honed work and learn from her wisdom by going over to check out her classes on CraftArtEdu.

 

Inspirational Challenge of the Day: Let’s play with color hue. Pick 2-3 colors–they can contrast, be analogous (next to each other on the color wheel) or simply be your favorites.  Choose two variations of each color–different saturation (how pure a hue it is), values (dark or light), or tints/shades (additions of white/black.) Now use just these to create a new piece.

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.

Shades of Clay Sept 15 Blog   never knead -july-2015c-125   The Great Create Sept 15 blog   businesscard-3.5inx2in-h-front

_________________________________________

Read More

Time to get Excited! Here’s the Winter 2016 Cover: On theSurface

November 12, 2016
Posted in ,

cover-16p4-fnl-med-96-padded

This next issue gets down to a subject most every polymer clayer can get behind. Or on top of really. That being surface design. The subject is a pretty broad one so it was tough deciding just what to put in the issue but we ended up with a very exciting mix of articles. Here is just part of the list:

  • The Well Designed Surface
  • Raised Surface Coloration
  • Unique Surface Variety
  • Ink Resist Polymer Painting
  • Creating Custom Texture Sheets
  • Wall Stories: The Art of Alev Gozonar
  • Color Spotlight with Donna Kato
  • The Backside of Brooches
  • Giving Away the Shop: Pros & Cons of Freebies & Giveaways
  • … and much more.

If you need to renew or purchase a subscription, or would like to pre-order your Winter issue,  you can go to our website here.

There is much to do so I am off to get this issue together and polished for you. We’ll get back to our regularly scheduled eye candy on Monday!

 

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.

Shades of Clay Sept 15 Blog   never knead -july-2015c-125   The Great Create Sept 15 blog   businesscard-3.5inx2in-h-front

_________________________________________

 

Read More

Looking Back for Inspiration

March 30, 2016
Posted in

A quick note on the Polymer Journey 2016 book … we’ve been able to extend the introductory sale through Friday, so if you haven’t reserved your copy or were waiting for payday, this is your chance!  Go to the website today before the price goes up this weekend.

TLilin deco butterflieshere are timeless techniques as well as timeless art. This easy but impressive looking technique, painting with mica powders on molded clay, was posted by Lilin in 2008. This particular construction harkens back to the art deco style with the enameled look of the butterfly wings against the stylized faces. It gives them an antique air. Lilin credits Donna Kato as her inspiration although she doesn’t say if that was from a book or class. But she gives her own brief instructions and tips, enough for you to get some ideas and run with a new design of your own.

The instructions for these are on this blog post. Lilin hasn’t posted since 2009 and I couldn’t find any reference to her moving her work to somewhere else. I am always curious how an artist progresses. It’s both encouraging and fascinating to see people improve their skills and to see what directions they chose. So I am curious. If anyone knows what Lilin is up to now, let me know and I’ll post an update here.

 

Inspirational Challenge of the Day: Find a new way to apply an old technique. Look through your older project books, back issues of magazines, or your favorite tutorial sites and find something you haven’t done in a while or never tried and use it with your present forms and color palettes. What do you do differently today that you didn’t when the tutorial was published or when you first used it? It’s interesting to see how your approach has shifted.

_________________________________________

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

      

   PCTV March 2016 Blog   

___________________________________________

Read More

Wooden Canes and Turquoise Veins

September 23, 2015
Posted in

Cara-Jane-Polymer-Clay-Faux-Turquoise-Ring-Polymania-2016-wmI was going to focus on mixed media this week, but I have run into a plethora of fabulous faux wood work, so I can’t resist showing some more. Where is this coming from? Is someone out there teaching a class or sharing a tutorial that I missed? Well, for whatever the reason, the trend has brought us some truly lovely faux wood like we’ve rarely seen before.

This ring by the ever-exploring Cara Jane Hayman just knocked my socks off. What a wonderful mahogany and inlaid look she achieved here. It’s dramatically paired with an almost graphical looking faux turquoise filled with a bold spiderweb veining. It’s terrifically real looking but aside from the impressive faux work, the pairing of visual textures in an uncomplicated form highlighted with a meticulous finish makes for a beautiful piece.

If you happen to be in the UK next year around, say, March 18th-20th, you absolutely will need to go to Polymania 2016 where Cara Jane will be teaching this ring as a workshop. You will also be able to take workshops with Claire Wallis, Bettina Welker and Donna Kato at this 3-day event. Check your calendars and get more information on this event and the skinny on this ring on Cara Jane’s website.

Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:

     

   TPA_McGuire_blog ad  Print

Read More

Blended Ikat

April 16, 2014
Posted in

As we look at polymer clay inspired by fabrics, this necklace by Eva Haskova, from the Czech Republic, looks much like woven ikat cloth. If you are not familiar with ikat, it is a dyeing technique that uses a resist dyeing process to pattern textiles. This style of tie-dye originated in Indonesia, and because of the difficulty involved in weaving ikat, some cultures believe the fabrics contain magical powers. Notice on the pendant how the texture resembles fabric that has been bound by threads during the dyeing process. The clarity of pattern in this piece is reminiscent of weft ikat weavings, giving it a contemporary yet ethnic design motif.

5522165091_44e0dc6a90_o

Eva developed her polymer skills with the help of Donna Kato, Carol Blackburn, and Leslie Blackford. She likes to work with natural materials, wire, and ceramic clay, as well as sewing and hand printing textiles. To see more of her work, visit her Flickr site or her website.

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

Blog2 -2014-02Feb-5   Millefiori eggs   14P1 cover Fnl

Read More

Spanning Spinning Rings

April 9, 2014
Posted in

Another design idea based on spanning the distance across the fingers along with including kinetic design in a ring can be found in one of Donna Kato’s first spinner rings. These rings have an element that will actually twirl when you spin them.  In this one it’s obviously the central red bead but the striped lines and wavy edge of the larger element already gives you a sense of movement. Plus this element wraps over both fingers to either side of the finger wearing it which would stabilize the large piece as well as make it really hard to miss!

5f9653978cb110af8229c5068d1f64f2

The engineering of new designs is one of Donna’s favorite aspects of jewelry making. But of course, Donna is one of those people just brimming with ideas not just for designs but for products, classes and business as well. Besides her line of Kato products, she is also the founder and one of the more prolific instructors at Craft Art Edu. Her spinner ring designs have evolved since the appearance of this one here several years ago and now you can take advantage of her experimentation and perfecting of the design in her spinner ring class.  Lucky you!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14P1 cover FnlBlog2 -2014-02Feb-5   Millefiori eggs        

Read More

Stack ’em Up

February 12, 2014
Posted in

Stacking layers of polymer clay can be a new way of looking at this material sculpturally as well as way to combine and reveal color. Spain’s Natalia García de Leániz (known as Tatana on Flickr) makes these chunky polymer beads by stacking the sliced clay and making bold bracelets with these large design elements.

5015466815_fc92dde297

As Nataila says, “Inspiration exists, but it has to find you working.” She works with her husband, Daniel Torres, in an “artnership” where they share ideas and yet they work in different, complementary or even opposite styles. Natalia makes all of her work in polymer clay, frequently working with textures and paint effects on clay. There are some tutorials on her website (and of CraftArtEdu) as well as a lot of additional photographs of her work. They plan to be at EuroSynergy in Malta this year, and if you want an excuse to travel to Madrid, Spain, the couple holds workshops in their studio and throughout Europe!

 

If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.

14P1 cover Fnl   PCW blue string art cane   Blog2 -2014-02Feb-2

Read More
If you love these posts ...